You are on page 1of 1

13.

1. What device is part of the leading edge when retracted:


a) flap
b) slat
c) slot

2. Where are the Krueger flaps located:


a) wing trailing edge
b) wing leading edge inboard
c) wing leading edge outboard

3. Where are the Krueger flaps ?


a) forward leading edge
b) on top of trailing edge
c) under the trailing edge

4. What are the spoilers used for ?


a) to control movement when doing controlled turns
b)
c)

5. What happens to the stall angle when the flaps are lowered ?
a) stays the same
b) increases
c) decreases

6. With flaps down , what happens to the lift / drag ratio ?


a) both increase
b) both decreases
c) lift increases drag decreases

7. With leading edge flaps deployed what effect does the airflow through the gaps
have ?
a)
b)
c)

8. What axis does yaw control ?


a) lateral
b) longitudinal
c) normal

9. What axis does pitch control ?


a) lateral
b) longitudinal
c) normal

10. What axis does roll control ?


a) lateral
b) longitudinal
c) normal

You might also like