Technical Data Sheet
GULF-O-FLEX® ALUMINUM FOIL TAPE
PRODUCT DESCRIPTION:
Gulf-O-Flex® Aluminum Foil Tape is coated with a strong hot melt
adhesive and laminated with release liner.
Pass
‘+ _Low moisture vapor transmission rate makes Gulf-O-Flex® Aluminum Tape an excellent vapor barrier.
+ Aluminum foil backing gives an excellent reflection of both heat and light.
+The aggressive hot melt adhesives offer for long serviceable life outdoor as well as a high humidity
atmosphere.
‘+ Suitable as masking in electroplating of Aluminium due to its non-contamination properties.
+ Best result obtained when it's applied to clean and dry surfaces,
Properties: Metric Test Method
Backing Thickness: 18 micron ASTM D 3652
Tensile Strength 35 N/25mm ‘ASTM D 3759,
Elongation 3.0% ASTM D 3759
Shear Strength > 96 Hours: ASTM D 3654
Ratreiene
‘+ Lamination for air conditioning ducting systems,
‘+ _ Roofing applications like flashing, joints, and insulations,
‘+ Duct sealing and joining for refrigerator and an excellent barrier to vapor.
‘+ General purpose holding, patching sealing applications-indoor and outdoor
Backing | Adhesive | Color Liner Sizes
Soft Temper White |W (ram) T (Vas) Rolls] Box
Aluminium Hot Melt Shiny Silver release 48 18, 22, 25 & 30 24
Foil 8014 paper 72 18, 22,25 630 76
Siew a
+ 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
Uae alana
+ Itis essential, as with all pressure-sensitive tapes, that he surface to which the tape is applied must be
clean, dry and free of grease, oll or other contaminants.
The formation and data contained horn is beloved to be accurate and reliable; however, is tho usors responsiblity fo determine Suitability
of use, Since the supper cannot know all the uses or the conditions of use to which these products may be exposed, no warranties
Canceming the fitness or suitability fore particular use or purpose are made. Gul. O-Flex® reserves the right to change the properties of its
products without notice.