Professional Documents
Culture Documents
Introducing…MatchMate Plus®
The 3 minute crimp hose
assembly system.
With Aeroquip’s MatchMate Plus
crimp hose assembly system, you can
make a factory-standard assembly in
as few as three minutes…featuring a
fitting design that’s available worldwide.
MatchMate
The process of matching and mating hose with fittings is
greatly simplified with the new MatchMate Plus system.
Colored rings on the hose layline match the design and
number of rings on its corresponding fitting type.
Following your selection of the proper hose and fitting,
the crimp machine “mates” the two parts through the use
of color-coded dies.
When the mating procedure is complete, you have a per-
fect hose assembly. You directly benefit with reduced
downtime, less scrap and minimal operator training.
Now Available with metric and stainless steel fittings. Plus…Global Fittings
The MatchMate Plus crimp system features Aeroquip’s
new one-piece global fitting. Global fittings offer you high-
er standard pressures, cool-down leakage control,
improved hose bend radii and worldwide availability. With
MatchMate Plus you can select from a variety of
Through-the Cover (TTC) fitting designs. TTC for medium
to high pressure/impulse applications or TTC12 fittings
for use with very high pressure spiral hose.
Aeroquip’s global product line is now enhanced by
combining the convenience, performance and accessi-
bility of TTC fittings with the ease and consistency of the
MatchMate Plus system. Together, global products and
MatchMate Plus bring you the 3 minute crimp hose
assembly system. It’s the simplest, most effective way to
replace your hydraulic hose assemblies. There is no
easier way to make a crimp hose assembly than
MatchMate Plus.
2
a MatchMate Plus ®
Products
Hose Assemblies
Made Easy with MatchMate Plus
Hose Selection
➀ Choose the right MatchMate Plus replacement hose by matching construction and size. Rings on
the colored layline indicate construction and the hose dash number indicates size.
Fitting Selection
➁ Select a MatchMate Plus fitting with the same dash number as the hose. Make sure the number of
grooved rings on the socket match the number of rings on the hose. Insert hose into fitting. Skiving
of hose is not necessary.
Final Assembly
➂ Choose the correct die cage by matching the dash number and the color code on the hose layline
to the color coded tabs on the die cage. Insert into crimp machine.
➃ Adjust the crimp machine setting as it is listed on the machine mounted decal or in the crimp
specification chart.
➄ Place your pre-assembled hose line in the die cage. Activate the crimp machine and it will
automatically crimp your assembly to factory standards.
3
a Index & How to Order
Part Number Index How to Order
Accurate processing and prompt
Part No. . . . . . . .Page Part No. . . . . . . .Page Part No. . . . . . . .Page delivery of your order depends on
GH120 . . . . . . . . . . . .11 1AA–FJB . . . . . . . . . . 15 1AV–FRC– . . . . . . . . 20 easy identification of your require-
GH194 . . . . . . . . . . . 10 1AA–FJC . . . . . . . . . 16 1AV–MB– . . . . . . . . . 17 ments. Please order Aeroquip parts
GH195 . . . . . . . . . . . 10 1AA–FR– . . . . . . . . . 18 1AV–MJ– . . . . . . . . . 16
using correct part numbers as
GH493 . . . . . . . . . . . . 9 1AA–FRA– . . . . . . . . 19 1AV–MP– . . . . . . . . . 12
described in this bulletin. Inquiries
GH663 . . . . . . . . . . . . 8 1AA–FRB– . . . . . . . . 20 1B–BF– . . . . . . . . . . . 29
GH781 . . . . . . . . . . . . 8 1AA–FRC– . . . . . . . . 20 1B–BFA– . . . . . . . . . . 30 and orders should be directed to
GH793 . . . . . . . . . . . . 9 1AA–FS– . . . . . . . . . 17 1B–BFB– . . . . . . . . . 30 your Aeroquip distributor or:
1A–BF– . . . . . . . . . . . 29 1AA–MB– . . . . . . . . . 17 1B-BT– . . . . . . . . . . . 31
Eaton
1A–BFA– . . . . . . . . . . 30 1AA–MF– . . . . . . . . . 21 1B–DL– . . . . . . . . . . . 32
1A–BFB– . . . . . . . . . 30 1AA–MFA– . . . . . . . . 22 1B–DS– . . . . . . . . . . 34 14615 Lone Oak Rd.
1A–BP– . . . . . . . . . . 31 1AA–MFB . . . . . . . . . 24 1B–DSA– . . . . . . . . . 34 Eden Prairie, MN 55344-2287
1A–BT– . . . . . . . . . . . 31 1AA–MJ– . . . . . . . . . 16 1B–DSB– . . . . . . . . . 35 USA
1A–DK– . . . . . . . . . . 33 1AA–MP– . . . . . . . . . 12 1B–EK– . . . . . . . . . . 35 tel: 952 937-9800
1A–DL– . . . . . . . . . . . 32 1AA–MR– . . . . . . . . . 21 1B–FH– . . . . . . . . . . 27
fax: 952 974-7722
1A–DLA– . . . . . . . . . 32 1AA–PS– . . . . . . . . . 12 1B–FHA– . . . . . . . . . 27
1A–DLB– . . . . . . . . . 33 1AP–FL– . . . . . . . . . . 23 1B–FHB– . . . . . . . . . 28 www.aeroquip.com
1A–DS– . . . . . . . . . . 34 1AP–FLA– . . . . . . . . 24 1B–FL– . . . . . . . . . . . 23
1A–DSA– . . . . . . . . . 34 1AP–FLB– . . . . . . . . 25 1B–FLA– . . . . . . . . . . 24
1A–DSB– . . . . . . . . . 35 1AP–FLD– . . . . . . . . 25 1B–FLB– . . . . . . . . . . 25 Dimensions
1A–EK– . . . . . . . . . . .35 1AP–SL– . . . . . . . . . . 21 1B–FLD– . . . . . . . . . . 25 Dimensions given in this catalog for
1A–FL– . . . . . . . . . . . 27 1AR–FJ– . . . . . . . . . . 13 1B–FLE– . . . . . . . . . . 26 Aeroquip products are approximate
1A–FLA– . . . . . . . . . . 24 1AR–FJA– . . . . . . . . 14 1B–FLF– . . . . . . . . . . 26 and should be used for reference
1A–FLB– . . . . . . . . . . 25 1AR–FJB– . . . . . . . . 15 1B–FLG– . . . . . . . . . 26 only. Exact dimensional information
1A–FLG . . . . . . . . . . 26 1AR–FJC– . . . . . . . . 16 1B–JF– . . . . . . . . . . . 36
for a given product is subject to
1A–JF– . . . . . . . . . . . 36 1AR–FR– . . . . . . . . . 18 1B–JM– . . . . . . . . . . 29
change and varying tolerances: con-
1A–JM– . . . . . . . . . . 29 1AR–FRA– . . . . . . . . 19 1B–KF– . . . . . . . . . . . 36
1A–KF– . . . . . . . . . . . 36 1AR–FRB– . . . . . . . . 20 1B–SL– . . . . . . . . . . . 21 tact Aeroquip directly for full current
1A–KS– . . . . . . . . . . 37 1AR–FRC– . . . . . . . . 20 1BA–FJ– . . . . . . . . . . 13 information.
1A–KSA– . . . . . . . . . 37 1AR–MB– . . . . . . . . . 17 1BA–FJA– . . . . . . . . . 14
1A–KSB– . . . . . . . . . 37 1AR–MJ– . . . . . . . . . 16 1BA–FJB– . . . . . . . . . 15 Part Sizes
1A–SL– . . . . . . . . . . . 21 1AR–MP– . . . . . . . . . 12 1BA–FJC– . . . . . . . . 16 Sizes are designated in 16ths of an
1AP–JM– . . . . . . . . . 29 1AT–FL– . . . . . . . . . . 23 1BA–FR– . . . . . . . . . 18 inch.
1AP–KF– . . . . . . . . . 36 1AT–FLA– . . . . . . . . . 24 1BA–FRA– . . . . . . . . 19
1AT–BF– . . . . . . . . . . 29 1AT–FLB– . . . . . . . . . 25 1BA–FRB– . . . . . . . . 20
1AT–BFA– . . . . . . . . . 30 1AT–FLD– . . . . . . . . . 25 1BA–FRC– . . . . . . . . 20
Hose Assemblies
Aeroquip manufactures the terminal
1AT–BFB– . . . . . . . . . 30 1AT–SL– . . . . . . . . . . 21 1BA–FS– . . . . . . . . . 17
1AT–BT– . . . . . . . . . . 31 1AV–FJ– . . . . . . . . . . 13 1BA–MB– . . . . . . . . . 17 ends of our hose fittings to the
1AT–DK– . . . . . . . . . 33 1AV–FJA– . . . . . . . . . 14 1BA–MJ– . . . . . . . . . 16 appropriate requirements estab-
1AT–DL– . . . . . . . . . . 32 1AV–FJB– . . . . . . . . . 15 1BA–MP– . . . . . . . . . 12 lished by the SAE. Therefore, the
1AT–JF . . . . . . . . . . . 36 1AV–FJC– . . . . . . . . . 16 1BA–MR– . . . . . . . . . 21 performance ratings of these hose
1AT–JM– . . . . . . . . . . 29 1AV–FR– . . . . . . . . . 18 fittings meet the SAE requirements.
1AT–KF– . . . . . . . . . . 36 1AV–FRA– . . . . . . . . 19 –indicates position of size in It is possible to order a hose assem-
1AA–FJ– . . . . . . . . . . 13 1AV–FRB– . . . . . . . . 20 part number. bly with a fitting terminal end that
1AA–FJA– . . . . . . . . . 14 has a performance rating lower than
the hose rating.
When ordering hose assemblies,
please keep the terminal end perfor-
Crimp Assembly mance rating in mind since this may
affect overall hose assembly perfor-
Equipment Accessories mance.
Part No. . . . . . . . . .Page Part No. . . . . . . .Page Part No. . . . . . . .Page Hose assembly components (hose
ProCrimp 1370 . . . . . . . 41 624 . . . . . . . . . . . . . . 39 900952 . . . . . . . . . . . 39 and fittings) shown in this cata-
ProCrimp 1380 . . . . . . . 42 222005 . . . . . . . . . . . 38 FC425 . . . . . . . . . . . . 39 log are easily assembled in the
ProCrimp 1390 . . . . . . . 43 900564 . . . . . . . . . . . 38 FF9217 . . . . . . . . . . . 40 field. However, factory assembled
900705 . . . . . . . . . . . 38 crimped hose assemblies are avail-
900729 . . . . . . . . . . . 40 able. For complete information con-
tact Aeroquip for Catalog JA316.
4
a How to Order Products
How to Order Hose How to Order Crimp Fittings
Cut Length Hose Global Part Numbering System
Cut lengths of hose should be ordered as shown below by Part numbers collapse to the shortest possible number of digits:
specifying lengths in inches. It is assumed that a Global Fitting has a straight configuration
unless a code is added to designate otherwise.
For alphanumeric part numbers: GH781 – 8 – 00484 e.g. 1AA8FJ8 has a straight configuration.
Hose type 1AA8FJA8 has a 45˚ elbow configuration.
Hose size (in 16ths of an inch) Dashes and unnecessary zeros are not used.
e.g. 1/4˝ is designated by “4” not “-4” or “04”
Cut length (in inches) 5/8˝ is designated by “10” not “-10”
Last digit is in 1/8ths of inch 00484=481⁄2 inches
Material Designation
Global crimp nipples, sockets and fittings are zinc plated carbon steel
Bulk Hose except those with a “C” suffix which designates stainless steel.
Bulk hose should be ordered by specifying length in feet as
shown below. Crimp Fittings
Complete part number: 500 ft – GH493 – 12 Complete part number: 1A A 8 FJ A 8 C
Quantity (in feet) Global TTC part number
(1B designates TTC12 part number)
Hose type
Hose size (in 16ths of an inch) Material stock code
If material is round stock,
then this position collapses.
Reeled Hose A = inch hex stock
Reeled hose should be ordered by adding “R” and the nomi- For 11⁄4˝ Braided Hose Fittings:
nal reel length as a suffix to the hose part number as shown P = 1 wire braid hose socket with no hex
below. R = 1 wire braid hose socket with inch hex
T = 2 wire braid hose socket with no hex
Complete part number: GH793 – 6R250 V = 2 wire braid hose with inch hex
Hose type
End connection size
Hose size (in 16ths of an inch) When ordering sizes 3, 4, 5, 6 and 8 the part number
Nominal reel length (in feet) requires only single digits
Hose size
Material designation
C=stainless steel.
If fitting is zinc plated carbon steel, then this position collapses.
5
a Conversion Table
Inch/Millimeter Conversion Table (Multiply Inches x 25.4=Millimeters)
Inches Millimeters Inches Millimeters Inches Millimeters
Fractions Decimals Decimals Fractions Decimals Decimals Fractions Decimals Decimals
1
⁄64 . . . . . .016 .397 25
⁄64 . . . . . .391 9.922 49
⁄64 . . . . . .766 19.447
⁄32 . . . . . .
1
. . . . . .031 .794 13
⁄32 . . . . . . . . . . . .406 10.319 25
32 ...... . . . . . .781 19.844
3
⁄64 . . . . . .047 1.191 27
⁄64 . . . . . .422 10.716 51
⁄64 . . . . . .797 20.241
1
⁄16 . . . . . . . . . . . .063 1.588 7
⁄16 . . . . . . . . . . . .438 11.113 13
⁄16 ...... . . . . . .813 20.638
5
⁄64 . . . . . .078 1.984 29
⁄64 . . . . . .453 11.509 53
⁄64 . . . . . .828 21.034
3
⁄32 . . . . . . . . . . . .094 2.381 15
⁄32 . . . . . . . . . . . .469 11.906 27
⁄32 ...... . . . . . .844 21.431
7
⁄64 . . . . . .109 2.778 31
⁄64 . . . . . .484 12.303 55
⁄64 . . . . . .859 21.828
1
⁄8 . . . . . . . . . . . . . . . . . .125 3.175 1
⁄2 . . . . . . . . . . . . . . . . . .500 12.700 7
⁄8 . . . . . . ...... . . . . . .875 22.225
9
⁄64 . . . . . .141 3.572 33
⁄64 . . . . . .516 13.097 57
⁄64 . . . . . .891 22.622
5
⁄32 . . . . . . . . . . . .156 3.969 17
⁄32 . . . . . . . . . . . .531 13.494 29
⁄32 ...... . . . . . .906 23.019
11
⁄64 . . . . . .172 4.366 35
⁄64 . . . . . .547 13.891 59
⁄64 . . . . . .922 23.416
3
⁄16 . . . . . . . . . . . .188 4.763 9
⁄16 . . . . . . . . . . . .563 14.288 15
⁄16 ...... . . . . . .938 23.813
13
⁄64 . . . . . .203 5.159 37
⁄64 . . . . . .578 14.684 61
⁄64 . . . . . .953 24.209
7
⁄32 . . . . . . . . . . . .219 5.556 19
⁄32 . . . . . . . . . . . .594 15.081 31
⁄32 ...... . . . . . .969 24.606
15
⁄64 . . . . . .234 5.953 39
⁄64 . . . . . .609 15.478 63
⁄64 . . . . . .984 25.003
1
⁄4 . . . . . . . . . . . . . . . . . .250 6.350 5
⁄8 . . . . . . . . . . . . . . . . . .625 15.875 1 ...... ...... . . . . . 1.000 25.400
17
⁄64 . . . . . .266 6.747 41
⁄64 . . . . . .641 16.272
9
⁄32 . . . . . . . . . . . .281 7.144 21
⁄32 . . . . . . . . . . . .656 16.669
19
⁄64 . . . . . .297 7.541 43
⁄64 . . . . . .672 17.066
5
⁄16 . . . . . . . . . . . .313 7.938 11
⁄16 . . . . . . . . . . . .688 17.463
21
⁄64 . . . . . .328 8.334 45
⁄64 . . . . . .703 17.859
11
⁄32 . . . . . . . . . . . .344 8.731 23
⁄32 . . . . . . . . . . . .719 18.256
23
⁄64 . . . . . .359 9.128 47
⁄64 . . . . . .734 18.653
3
⁄8 . . . . . . . . . . . . . . . . . .375 9.525 3
⁄4 . . . . . . . . . . . . . . . . . .750 19.050
0 1 2 3 4 5 6 7 8 9
PSI Bar Bar Bar Bar Bar Bar Bar Bar Bar Bar
0 – .069 .138 .207 .276 .345 .414 .483 .552 .671
10 .689 .759 .828 .897 .966 1.034 1.103 1.172 1.241 1.310
20 1.379 1.448 1.517 1.586 1.652 1.724 1.793 1.862 1.931 2.000
30 2.069 2.138 2.207 2.276 2.345 2.414 2.483 2.552 2.621 2.689
40 2.759 2.828 2.897 2.966 3.034 3.103 3.172 3.241 3.310 3.379
50 3.448 3.517 3.586 3.655 3.724 3.793 3.862 3.931 4.000 4.069
60 4.138 4.207 4.276 4.345 4.414 4.483 4.552 4.621 4.689 4.759
70 4.828 4.897 4.966 5.034 5.103 5.172 5.241 5.310 5.379 5.448
80 5.517 5.586 5.655 5.724 5.793 5.862 5.931 6.000 6.069 6.138
90 6.207 6.276 6.345 6.414 6.483 6.552 6.621 6.689 6.759 6.828
100 6.897 6.966 7.034 7.103 7.172 7.241 7.310 7.379 7.448 7.517
*Note: Columns headed 0 thru 9 in above table represent increments of figures listed in first column at left. For example: In converting from PSI to Bar, 18 PSI=1.241 Bar.
6
a Warning
Flexible hose lines offer many advantages over rigid tubing WARNING
including routing ease, vibration absorption, sound deadening
and the ability to accommodate movement of connected com- AEROQUIP FITTING TOLERANCES ARE ENGINEERED TO
ponents. However, hose lines require caution in use not only MATCH AEROQUIP HOSE TOLERANCES. THE USE OF
to provide long service but also to guard against potentially AEROQUIP FITTINGS ON HOSE SUPPLIED BY OTHER
dangerous failure. MANUFACTURERS AND/OR THE USE OF AEROQUIP
HOSE WITH FITTINGS SUPPLIED BY OTHER MANU-
FACTURERS MAY RESULT IN THE PRODUCTION OF
UNRELIABLE AND UNSAFE HOSE ASSEMBLIES AND IS
FT1049 Crimp Machines:
NEITHER RECOMMENDED NOR AUTHORIZED BY
If the backstop is used on the FT1049 crimper for crimping AEROQUIP.
TTC or TTC12 fittings, it must have the FT1049-130-5 spring
AEROQUIP SHALL NOT BE SUBJECT TO AND DIS-
option added. Contact Aeroquip if you have an FT1049 crimp
CLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING
machine which needs this adjustment. Failure to properly
BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDEN-
crimp a hose assembly could lead to failure of the assembly
TAL AND CONTINGENT DAMAGES) ARISING OUT OF
and possible injury.
BREACH OF CONTRACT OR OF WARRANTY OR ARISING
FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION
NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEO-
RIES OF LAW WITH RESPECT TO ANY HOSE ASSEM-
BLIES NOT PRODUCED FROM GENUINE AEROQUIP
HOSE FITTINGS, HOSE AND AEROQUIP APPROVED
EQUIPMENT, AND IN CONFORMANCE WITH AEROQUIP
PROCESS AND PRODUCT INSTRUCTIONS FOR EACH
SPECIFIC HOSE ASSEMBLY.
FAILURE TO FOLLOW AEROQUIP PROCESS AND PROD-
UCT INSTRUCTIONS AND LIMITATIONS COULD LEAD TO
PREMATURE HOSE ASSEMBLY FAILURES RESULTING IN
PROPERTY DAMAGE, SERIOUS INJURY OR DEATH.
7
a MatchMate Plus ®
Hoses
GH663
Single wire braid meets EN 853 Type 1SN Exceeds SAE 100R1AT performance
HI-IMPULSE®
Construction: Synthetic rubber tube, single wire
braid reinforcement and synthetic rubber cover.
Application: Hydraulic system service with
petroleum and water-glycol base fluids, for general
industrial service.
Operating Temperature Range: -40˚F. to +212˚F. (-40˚C. to +100˚C.)
For complete agency listings see page 11. Fittings: TTC pages 12 to 37.
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH663-4 .25 .53 3250 13000 4.00 .16 -1S -6 -1S -1 % -12 -11 -0622S
GH663-6 .38 .69 3000 12000 5.00 .25 -2S -10 -2S -3 % -16 -14 -0622S
GH663-8 .50 .81 2500 10000 7.00 .30 -15S -10 -3S -5 % -16 -16 -0622S
GH663-12 .75 1.09 1800 7200 9.50 .45 -5S -16 -5S -8 -14C -24 -22 -0648S
GH663-16 1.00 1.41 1300 5200 12.00 .68 -6S -16 -6S -25 -15C -24 -26 -0648S
GH663-20 1.25 1.71 950 3770 16.50 .88 -9S -30 -8S -12 -32 -30 -0648S
GH663-24 1.50 1.99 725 2900 20.0 1.05 -8S -30 -8S -13 -38 -38 -0648S
GH663-32 2.00 2.52 580 2320 25.00 1.31 -13S -30 -12S -30 -46 -46 -0664C
GH781
Double wire braid exceeds EN 857 Type 2SC performance exceeds SAE 100R16
GH781-4 .25 .53 5800 23200 2.00 .22 -1S -8 -13S -2 % -12 -12 -0622S
GH781-6 .38 .69 5000 20000 2.50 .29 -2S -10 -2S -4 % -16 -16 -0622S
GH781-8 .50 .81 4250 17000 3.50 .39 -14S -12 -3S -5 % -16 -18 -0622S
GH781-10 .62 .93 3625 14500 4.00 .44 -4S -12 -4S -6 % -20 -18 -0630S
GH781-12 .75 1.10 3125 12500 4.75 .53 -4S -16 -14S -9 -14C -24 -22 -0648S
GH781-16 1.00 1.42 2500 10000 6.00 .72 -6S -22 -7S -10 -15C -24 -28 -0648S
GH781-20 1.25 1.65 2250 9000 8.25 1.09 -7S -22 -9S -12 -28 -28 -0648S
GH781-24 1.50 2.03 1800 7200 10.00 1.40 -8S -30 -8S -13 -38 -38 -0648S
GH781-32 2.00 2.52 1300 5200 12.50 1.88 -13S -30 -12S -30 -46 -46 -0664C
*Sizes indicated are based on Hose O.D. only. If sleeve or coil is to be placed over fittings, a larger sleeve or coil size may be required depending on the type of fitting.
% Call Aeroquip Corporation for dimensions.
8
a MatchMate Plus ®
Hoses
GH793
Double wire braid meets EN 853 Type 2SN Exceeds SAE 100R2AT performance
HI-IMPULSE®
Construction: Synthetic rubber tube, double wire
braid reinforcement and synthetic rubber cover.
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH793-4 .25 .60 5750 23000 4.00 .26 -1S -8 -13S -2 % -12 -12 -0622S
GH793-6 .38 .75 5000 20000 5.00 .38 -2S -10 -2S -4 % -16 -16 -0622S
GH793-8 .50 .87 4250 17000 7.00 .46 -14S -12 -3S -5 % -16 -18 -0622S
GH793-10 .62 .98 3625 14500 8.00 .54 -5S -16 -5S -6 % -20 -20 -0630S
GH793-12 .75 1.16 3125 12500 9.50 .66 -4S -16 -14S -9 -14C -24 -22 -0648S
GH793-16 1.00 1.50 2500 10000 12.00 1.01 -6S -22 7S -10 15C -20 -28 -0648S
GH793-20 1.25 1.92 2250 9000 16.50 1.54 -9S -22 -9S -12 -17C -32 -32 -0664C
GH793-24 1.50 2.15 1800 7200 20.00 1.68 -8S -30 -10S -13 18C -38 -38 -0648S
GH793-32 2.00 2.51 1300 5200 25.00 2.22 -10S -30 11S -30 19C -46 -46 -0664C
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH493-6 .38 .79 4000 16000 5.00 .47 -15S -12 -3S -5 % -16 -16 -0622S
GH493-8 .50 .92 4000 16000 7.00 .59 -3S -12 -4S -6 % -20 -20 -0648S
GH493-10 .63 1.11 4000 16000 9.50 .80 -4S -16 -5S -8 % -20 -22 -0648S
GH493-12 .75 1.20 4000 16000 9.50 .92 -5S -16 -6S -27 -14C -24 -24 -0648S
GH493-16 1.00 1.48 4000 16000 12.00 1.22 -6S -22 -7S -10 -15C -28 -28 -0648S
GH493-20 1.25 1.83 3000 12000 16.50 1.64 -9S -22 -9S -28 -17C -32 -38 -0648S
GH493-24 1.50 2.12 2500 10000 20.00 2.10 -8S -30 -8S -29 18C -38 -38 -0648S
GH493-32 2.00 2.64 2500 10000 25.00 2.98 -10S -30 -11S -31 -19C -46 -54 -0664C
*Sizes indicated are based on Hose O.D. only. If sleeve or coil is to be placed over fittings, a larger sleeve or coil size may be required depending on the type of fitting.
% Call Aeroquip Corporation for dimensions.
9
a MatchMate Plus Hoses ®
HI-IMPULSE® /AQP®
Construction: AQP rubber tube, single wire
braid reinforcement and blue AQP cover.
Application: Hydraulic system service with
petroleum, fire resistant and water base fluids,
fuel and lubricating systems.
Operating Temperature Range: -40˚F. to +300˚F. (-40˚C. to +150˚C.)
For complete agency listings see page 11. Fittings: TTC pages 12 to 37.
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH194-4 .25 .53 3250 13000 4.00 .17 -1S -6 -1S -1 % -12 -11 -0622S
GH194-6 .38 .69 3000 12000 5.00 .25 -2S -10 -2S -3 % -16 -14 -0622S
GH194-8 .50 .81 2500 10000 7.00 .30 -15S -10 -3S -5 % -16 -16 -0622S
GH194-10 .63 .94 2000 8000 8.00 .36 -4S -12 -4S -6 % -20 -18 -0630S
GH194-12 .75 1.09 1800 7200 9.50 .46 -5S -16 -5S -8 222005-14C -24 -22 -0648S
GH194-16 1.00 1.41 1300 5200 12.00 .66 -6S -22 6S -25 22200515C -24 -26 -0648S
GH194-20 1.25 1.73 900 3600 16.50 .85 -9S -30 -8S -32 -30 -0648S
HI-IMPULSE®/AQP®
Construction: AQP elastomer tube, double wire
braid reinforcement and blue AQP cover.
Application: Hydraulic system service with
petroleum, fire resistant and water base fluids,
fuel and lubricating systems.
Operating Temperature Range: -40˚F. to +300˚F. (-40˚C. to +150˚C.)
For complete agency listings see page 11. Fittings: TTC pages 12 to 37.
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH195-4 .25 0.6 5750 23000 4.00 .27 -1S -8 -13S -2 % -12 -12 -0622S
GH195-6 .38 .75 5000 20000 5.00 .39 -15S -10 -2S -4 % -16 -16 -0622S
GH195-8 .50 .87 4250 17000 7.00 .46 -3S -12 -3S -5 % -16 -18 -0622S
GH195-10 .63 .99 3250 13000 8.00 .54 -54S -16 -5S -6 % -20 -20 -0630S
GH195-12 .75 1.16 3000 12000 9.50 .67 -5S -16 -6S -9 222005-14C -24 -22 -0648S
GH195-16 1.00 1.49 2500 10000 12.00 .97 -7S -22 -9S -10 222005-15C -20 -28 -0648S
GH195-20 1.25 1.92 2250 9000 16.50 1.54 -8S -30 -10S -12 222005-17C -32 -32 -0664C
GH195-24 1.50 2.15 1750 7000 20.00 1.74 -10S -30 -11S -13 222005-18C -38 -38 -0648S
GH195-32 2.00 2.67 1500 6000 25.00 2.22 -13S -30 12S -30 222005-19C -46 -46 -0664C
*Sizes indicated are based on Hose O.D. only. If sleeve or coil is to be placed over fittings, a larger sleeve or coil size may be required depending on the type of fitting.
% Call Aeroquip Corporation for dimensions.
10
a Agency Hose Listings
MatchMate ICE GH120
Cold temperature applications, exceeds SAE 100R16 performance
Max. Min. Min. Steel Prot. Plastic Steel Prot. Support Internal Nylon Firesleeve
Hose Hose Oper. Burst Bend Wt. Coil Spring* Coil Sleeve* Coil Sleeve* Clamp Support Coil Sleeve* Firesleeve* Clamp
Part I.D. O.D. Pressure Pressure Radius Per Ft. 900564 900952 900705 900729 222005 FC425 624 FF9217
Number (inches) (inches) (psi) (psi) (inches) (lbs.) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size) (dash size)
GH120-4 .25 .56 5000 20000 2.00 .20 -1S -8 -13S -2 -12 -12 -0622S
GH120-6 .38 .68 4000 16000 2.50 .27 -2S -10 -2S -3 -16 -16 -0622S
GH120-8 .50 .82 3500 14000 3.50 .39 -14S -12 -3S -5 -16 -18 -0622S
GH120-10 .63 .98 2750 11000 4.00 .50 -54S -16 -5S -6 -20 -20 -0630S
GH120-12 .75 1.12 2250 9000 4.75 .62 -5S -16 -6S -9 -22 -22 -0648S
GH120-16 1.00 1.41 2000 8000 6.00 .82 -7S -22 -7S -10 -24 -28 -0648S
GH120-20 1.25 1.71 1625 6500 8.25 1.07 -9S -30 -8S -32 -30 -0648S
GH120-24 1.50 2.03 1250 5000 10.00 1.42 -10S -30 -15S -29 -38 -38 -0648S
GH120-32 2.00 2.51 1125 4500 12.50 1.88 -13S -30 -12S -30 -46 -46 -0664C
The listings below are intended only as guides in identifying SAE — Society of Automotive Engineers
which Aeroquip hoses comply with requirements of various UL – Underwriters Laboratories
agencies. For current and complete information, contact
Aeroquip.
Government Industry
Hose
Part USCG/ NMMA/ TMC/
Number Page DOT/FMVSS FDA MIL/DOD MSHA MMT* DIN EN DNV BIA ATA SAE UL
GH663 9 ✔ ✔ 20 022 Type 1SN EN 853 Type 1SN ✔ 100R1AT
GH781 10 ✔ 20 022 Type 2ST EN 857 Type 2SC 100R16
GH793 11 ✔ ✔ 20 022 Type 2SN EN 853 Type 2SN ✔ 100R2AT
GH493 12 ✔ ✔ EN 856 Type R12 100R12
GH194 13 ✔ 20 022 Type 1SN EN 853 Type 1SN 100R1AT
GH195 14 ✔ 20 022 Type 2SN EN 853 Type 2SN 100R2AT
GH120 11 ✔ 100R16
✔ = Details available from Aeroquip *Listing may vary by hose style and size, some hoses may
require firesleeve or special procedures depending on
specific applications, contact Aeroquip for details.
11
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
12
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
13
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
14
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
15
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
16
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
17
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
18
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
19
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
20
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
21
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
22
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
23
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
24
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
25
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
26
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
27
a Global Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number
Flange
Head Dia.
Hose
Size
A
(ins.)
D
(ins.)
E∅
(ins.)
H
(ins.)
1
(ins.)
2
(ins.)
28
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
BSP Female Swivel (BF) BSP Female Swivel (JM) ALL DIMENSIONS IN MILLIMETERS
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
29
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
30
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
BSP Male Tapered (BT) BSP Male Parallel (BP) ALL DIMENSIONS IN MILLIMETERS
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
31
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
32
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
33
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
34
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
35
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195, GH663, GH781, GH793
30
E
30
E
Global TTC12 Fittings for use with Hose: GH493
2
2
TTC TTC12
Part
Number
Part
Number Thread
Tube
O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
30 30
TTC12-
TTC-
E E
2 2
30 30
TTC-
TTC12-
E E
2 2
36
a Global Metric Fittings
Global TTC Fittings for use with Hose: GH120, GH194, GH195,
E GH663, GH781, GH793
E
H H
K E
K
K
Global TTC12 Fittings for use with Hose: GH493
Komatsu Split Flange (KS) Komatsu Split Flange Komatsu Split Flange
45˚ Elbow (KSA) 90˚ Elbow (KSB)
TTC TTC12
Part
Number
Part
Number
Flange Tube
Head Dia. O.D.
Hose
Size
A
(mm)
D
(mm)
E∅
(mm)
H
(mm)
1
(mm)
2
(mm)
TTC-
K E
E
H
K
37
a Accessories
Protective Coils, Sleeves & Clamps
Recommended for vacuum service Recommended for use where hose Protects hose cover and reinforce-
with most hose. 222005 is stainless lines are subjected to excessive ment from abrasion and accidental
steel. abrasion, kinking or accidental dam- damage. Construction: steel wire, rust
age. Construction: spring steel, rust resistant.
resistant.
38
a Accessories
Protective Coils, Sleeves & Clamps
39
a Accessories
Protective Coils, Sleeves & Clamps
Clamp
900729 Clamp I.D. (inches) FF9217
Support Clamp Dash No. Closed Firesleeve clamp
-18 .25
-19 .38
-01 .44
-1 .50
-2 .56
-21 .63
-10 1.50
-11 1.56
-12 1.75
-28 1.81
-13 2.00
-29 2.06
-14 2.25
-30 2.50
-31 2.63
-15 2.75
-16 2.88
-17 3.56
40
a Crimp Assembly Equipment
®
1370
Portable Crimp Machine
The portable Aeroquip ProCrimp 1370 is the ideal crimp machine
when quick, onsite hydraulic hose repairs are needed.
Features
• Compatible with the Aeroquip MatchMate Plus System
• Can be mounted on service vehicles due to its portable design
• Can be powered with virtually any 10,000-psi hydraulic power source
• Utilizes ProCrimp 1380 quick-change die cages
• Designed with shims that control the crimp diameter
Ordering Instructions
Step 1—Shim Kits Order the Shim Kit(s) for the hose to be assembled.
Shim Kit Part Number Hose (Sizes Included)
FT1370-5-1 GH194 with TTC fittings (–4 through –20)
FT1370-5-2 GH195 with TTC fittings (–4 through –20)
FT1370-5-3 GH663/FC211/FC613 with TTC fittings (–4 through –20)
FT1370-5-4 GH781/FC579/FC735 with TTC fittings (–4 through –20)
FT1370-5-5 GH793/FC212 with TTC fittings (–4 through –20)
FT1370-5-6 GH493 with TTC fittings (–6 through –16)
Step 2—Crimp Machine Kits
No-Pump Kits Hand-Pump Kits Air/Hydraulic Pump Kits
FT1370-1-1 (no dies) FT1370-1-2 (no dies) FT1370-1-3 (no dies)
FT1370-1-1-5 (5 die cages) FT1370-1-2-5 (5 die cages) FT1370-1-3-5 (5 die cages)
FT1370-1-1-9 (9 die cages) FT1370-1-2-9 (9 die cages) FT1370-1-3-9 (9 die cages)
12-Volt DC Power Unit Kits 115-Volt Power Unit Kits
FT1370-1-4 (no dies) FT1370-1-5 (no dies)
FT1370-1-4-5 (5 die cages) FT1370-1-5-5 (5 die cages)
FT1370-1-4-9 (9 die cages) FT1370-1-5-9 (9 die cages)
5 Die Cages—Required to crimp the five most popular GH793 and GH781 2-wire braid hose sizes:
–4, –6, –8, –12 and –16
FT1380-200-M150 FT1380-200-M210 FT1380-200-240
FT1380-200-M320 FT1380-275-M370
9 Die Cages—For crimping Matchmate Plus hose through –20 (2-wire braid) and –16 (4-spiral)
Includes the five die cages plus:
FT1380-200-M180 FT1380-200-M280
FT1380-275-M420 FT1380-275-M465
41
a Crimp Assembly Equipment
®
1380
The new ProCrimp 1380 crimp
machine from Aeroquip crimps all
your hose needs up to and
including -20 SAE100R12 hose
styles and the popular MatchMate
Plus hose and fittings program
(shown with optional die holder kit
FT1380-2-4). The ProCrimp 1380 is
electronically controlled to give fast,
accurate crimps the first time and
every time you need a hose
assembly. The electronic keypad is
easy to adjust, with up to 10
programmable crimp settings. For
hose styles and sizes used less
frequently simply enter the 3 digit code of that hose. The ProCrimp 1380 comes complete
with a standard power unit.
FT1380-115-5 . . . . . . 2-Wire braid hose package - FT1380-115 with the 5 die cages needed to crimp the 5 most popular
GH793 or GH781 2-wire hose sizes: -4, -6, -8, -12 & -16
. .Die Cages: FT1380-200-M150, FT1380-200-M210, FT1380-200-M240, FT1380-200-M320,
FT1380-200-M370
FT1380-115-8 . . . . . . Braided and spiral hose package - FT1380-115-5 with the 3 additional die cages- capable of crimping
all MatchMate Plus hoses thru -20
Die Cages: FT1380-200-M180, FT1380-200-M280, FT1380-200-M465
FT1380-2-3 . . . . . . . . FT1330 to FT1380 Die Cage conversion kit - back plate, bolts and instructions necessary to convert an
FT1330 die cage to an FT1380 die cage. Simply remove the FT1330 back plate and replace it with the
new FT1380 back plate.
FT1380-2-4 . . . . . . . . Optional die holder kit - Kit includes 4 die holder plates each of which will hold 2 die cages.
Holes are pre-drilled on base of ProCrimp machine to accept these 4 plates.
42
a Crimp Assembly Equipment
®
1390
Now available from Aeroquip
The new Aeroquip ProCrimp 1390 hose assembly crimp machine is
Aeroquip’s top-of-the-line crimper. It is capable of crimping Aeroquip
thru-the-cover, single skive and internal skive fittings for 3/16˝ thru 2˝
I.D. hose. This includes hose used in hydraulic, thermoplastic, air
conditioning, Teflon and fuel/oil applications. The efficient 10,000 PSI
hydraulics combined with simple electronic controls make the ProCrimp
1390 fast, quiet and easy to use which provides excellent productivity
and less chance for error.
FT1390-115-12 . . . . . Machine plus 12 standard die cages needed to crimp a wide variety of Aeroquip hose styles* including
MatchMate Plus: FT1307-200-M150, FT1307-200-M180, FT1307-200-M210, FT1307-200-M240,
FT1307-200-M280, FT1307-200-M320, FT1307-200-M370, FT1307-200-M420, FT1307-200-M465,
FT1307-200-M520, FT1307-200-M550, FT1307-200-M690
43
Eaton
14615 Lone Oak Rd.
Eden Prairie, MN 55344-2287
USA
tel: 952 937-9800
fax: 952 974-7722
www.aeroquip.com
© 2002 Eaton
All Rights Reserved
Printed in USA
Document No. A-HX-MC-0001-E