Professional Documents
Culture Documents
High precision operations come with a and axial loads in one direction. These sealed design provides a number of
number of challenges. The space in bearings contain the maximum number advantages including preventing dirt
which the machining occurs is often and size of balls to better meet driven particles from penetrating the bearing,
limited, with short cycle times and use tools application requirements. Their decreasing risk of lubricant contamina-
of high machining forces. In addition, close osculation provides a high degree tion, shortening mounting time and
contaminants, noise and vibration levels of stiffness and the highest possible load extending maintenance intervals.
increase the stress put on machinery as carrying capacity.
well as on operators. These conditions
require specially designed bearings Engineered for a
which contribute to reliable High system rigidity consistent operation
performance and increased uptime. SKF without limiting speed
super-precision angular contact ball The improvements that come with SKF
bearings for driven tools are designed to The contact angle of 25° meets the super-precision bearings for driven
ensure a smooth operation. They are requirements of driven tool applications tools all help extend the bearing service
characterized by: without limiting the speed capability. life, increase uptime and lower the total
The compact, high power density design cost of ownership. A reliable choice for a
• High axial and radial load has improved load sharing across the smooth, quiet and environmentally
carrying capacity bearings, resulting in high system rigidity. friendly operation.
To reduce noise and vibration levels to a
• High degree of stiffness
minimum, the bearings are fitted with
• Low noise and vibration levels an optimized and silent running glass- Overall benefits:
fibre reinforced polyamide cage. The
higher rotational stability and low level Increased reliability
Design based on of heat generation results in an
well-proven technology extremely quiet operation. Improved productivity
3
Super-precision angular contact ball bearings for driven tools
d 10 – 40 mm
B
r2 r4
r1 r3
r1 r1
r2 r2
D2 d d1 D
Sealed variant
d D B
mm kg – –
10 22 6 0.01 71900/VA9D1 S
26 8 0.019 7000/VA9D1 S
12 24 6 0.011 71901/VA9D1 S
28 8 0.021 7001/VA9D1 S
15 28 7 0.016 71902/VA9D1 S
32 9 0.03 7002/VA9D1 S
17 30 7 0.017 71903/VA9D1 S
35 10 0.038 7003/VA9D1 S
20 37 9 0.037 71904/VA9D1 S
42 12 0.068 7004/VA9D1 S
25 42 9 0.043 71905/VA9D1 S
47 12 0.079 7005/VA9D1 S
30 47 9 0.049 71906/VA9D1 S
55 13 0.11 7006/VA9D1 S
35 55 10 0.077 71907/VA9D1 S
62 14 0.15 7007/VA9D1 S
40 62 12 0.11 71908/VA9D1 S
68 15 0.19 7008/VA9D1 S
4
ra rb ra
ra ra ra
Da da Db
mm mm cm3
35 41.6 50.4 0.6 0.3 38.2 41.1 51.8 53.6 0.6 0.3 0.47
43.7 55.6 1 0.3 39.6 43.2 57.4 60 1 0.3 0.99
40 47.1 57.2 0.6 0.3 43.2 46.6 58.8 60.6 0.6 0.3 0.72
49.2 61.1 1 0.3 44.6 48.7 63.4 66 1 0.3 1.2
1) Only applicable for sealed bearings.
Temperature rise
This diagram shows the performance of a set of two bearings S71906/VA9D1 in back-to-back
arrangement in typical operating conditions in driven tools applications.
Temperature [°C]
30
20
10
0
0.0 0.2 0.4 0.6 0.8 1.0
Speed value ndm [106 mm/min]
5
Select the right bearing
to improve performance
SKF super-precision angular contact ball bearings for driven For back-to-back and face-to-face arrangements, bearings
tools are available as single, universally matchable bearings. with the same stand-out value, but opposite signs, should be
They are specifically manufactured so that when mounted in a matched. For example, by combining bearings with standouts
random order, but immediately adjacent to each other, it will of –2 and +2, or –1 and +1, the sum of the stand-outs will be
result in a preload within a predetermined range and effective 0. If different stand-outs are combined, for example, –1 and
load sharing without the use of shims or similar devices. +2, the sum of the stand-outs will be +1, which will lead to
Improved performance can be achieved when two bearings slightly higher preload in the bearing set. For tandem
for paired matching are selected based on their stand-out arrangements, bearings with the same stand-out value and
values. The stand-out value is marked on the bearing and on the same negative or positive sign should be matched.
the package.
The stand-out value, where the stand-out of the back face
(tb) is practically equal to the stand-out of the front face (tf),
defines the position of the side face of the inner ring with
respect to the side face of the outer ring under measuring
load F, which is equal to the desired preload class (fig. 1). The
values (tb) and (tf) are close to zero when the measuring load
is equivalent to the preload desired.
Fig. 1
Stand-out value Fig. 1
Stand-out value
+tf
–tf
F
measuring load
F
measuring load
–tb
+tb
6
SKF Super-precision bearing
Data Manager App
The most important specifications of SKF super-precision
bearings are easily available on your smartphone, tablet and The app is available on:
computer using our app. Simply scan the QR code on packages
and bearings to get direct access to the bearing’s dimensions, Windows PC
mounting instructions and measurement reports. The app is
programmed not only to contribute to the traceability of each
bearing (showing country and date of manufacturing), but
also to facilitate the grouping of bearings. This is particularly
important when matching single universal bearings to create
sets.
7
skf.com
® SKF is a registered trademark of the SKF Group.
App Store is a trademark of Apple Inc, registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.
Windows is a registered trademark of the Microsoft Inc. in the US and/or other countries.