You are on page 1of 4

T.D. Williamson, Inc.

Your Source for Piping Solutions.


®
‘TDW FOAM PIGS HAVE
SUPERIOR PERFORMAN
FOR OVER
15YEA
TDW’s WHITESKIN and REDSKIN Foam Pigs have long been the
M TM

worldwide industry standard for foam pigs. Foam pigs are basically
a cylinder of specially formulated foamthat is flexible, durable and
gets the job done. These designs are simple, but simplicity is
everything selecting a foam pig that will not break apart when
commissioning and cleaning your pipelines. TDW foam pigs have
been delivering superior performance and reliability for over 15
years. Test results have proven that TDW foam pigs do a better
job for a longer time which means more reliable effective pig
runs for you. (See back panel for test results.)

TDW Foam
Pigs and Features
REDSKIN Swab (RS-7) REDSKIN Bristle (RSB-7)
TM TM

Comes in 2-24-inch sizes. This tough, abrasion resistant Thousands of spiral bristles are added to the swab pig, providing
polyurethane foam with honeycomb surface texture is longer full pipe coverage. Bypass grooves keep solids moving ahead of
wearing. Honeycomb edges effectively scrape and wipe the the pig and reduce clogging of bristles. This pig provides effective
pipeline wall. It provides a lower cost-per-mile benefit with cleaning and removal of solids, increases throughput and reduces
better wiping performance. An elastomeric coating the back pumping costs.
of the swab provides a leakproof seal.
BEEN DELIVERING
NCE & RELIABILITY
R
ARS’REDSKIN ROUGH RIDER Pig (RRR-7)
TM ®

Bristles are replaced with a spiral band of 1/8-inch raised urethane


nubs that scrape and clean the pipe wall. This pig was designed
for use in internally coated lines and crude oil lines containing
parraffin.

The WHITESKIN Pig TM

This pig is available in sizes 2-42 inches. It is recommended


for shorter runs for air or water service. Primary purpose is line
drying after hydrostatic stesting. Special diameters are available
in 2, 3, 4 and 6-inch sizes for use in polyethylene (PE) pipe.
Provides for a better fit in the pipe and requires less time to
insert a pig into the pipe.

Bi-Directional Foam Pigs


Both REDSKIN and WHITESKIN pigs are available in a double-
TM TM

dish design for bi-directional application. Pipeline pressure pushes


out on concave the dish, creating an effective seal regardless of
direction of travel. This provides a more effective seal for purging,
filling and dewatering applications.
Features of Pig One
REDSKIN Pigs
TM

The urethane cover started to tear away at 23 passes.


Much of it was gone and a crack had developed
Tough polyurethane walled-cell structure along the rear.
provides excellent abrasion resistance
and effective scraping/wiping action.

Oversized Diameter
Ensures a tight fit and effective seal regardless of pipe-wall
thickness. This feature provides effective results for line filling
and dewatering associated with hydrostatic testing.

Flexibility
The REDSKIN Pig can traverse short-radius elbows, tees, 90-degree
TM

miter bends, variable wall thickness, and reduced bore valves.


In many cases, this eliminates the need to modify a pipeline in order
Pig Two
This competitor’s pig cracked around the middle
to facilitate pigging. after 20 passes. Notice how the urethane foam
is starting to tear.
Bypass Configuration
A bypass can be utilized to create
turbulence which helps suspend
debris ahead of the pig.

Partial bypass Bypass groove Full bypass


blocked off with
foam (no bypass) Pig Three
The Test This competitor’s pig made 25 passes through
TDW evaluated its REDSKIN foam pig against various pigs manu- the loop before it split at the front. One more
factured by others. All five pigs were run repeatedly through a 12-inch pass and it would have been in two pieces.
loop configured with same girth welds extending into the pipe.

The Winner Pig Five


This tough, abrasion-resistant polyurethane foam pig, with honeycomb
surface texture, was run through the test loop 60 times,
and is ready to go again... clearly the
TDW Foam Pig is flat out superior.

Pig Four
Only ten times around the loop and this
competitor’s foam pig completely came apart.

T.D. Williamson, Inc.


Your Source for Piping Solutions.
®
800-571-7447 | 918-447-5400 www.tdwilliamson.com
® Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
Pub: 30-359-0105-ENG

You might also like