Professional Documents
Culture Documents
• Operate the jack handle until the saddle contacts the load. 1. Release Valve
2. Base
The jack works in accordance with the hydraulic principle. The Once again check to see that the saddle is correctly posi-
3. O-ring
feature is compactness, small, light and portability. They are tioned. 4. Hydraulic Cylinder
• Raise the load to the desired height and then transfer the 5. Ram
widely used in automobiles and tractors. 6. Hydraulic Oil
The jacks are suitable only for vertical lifting jobs. The range load to the vehicle support stands. 7. Oil Tight Tank
To lower: 8. Extension Screw
of ambient temperature at which the jacks can be used is from 9. Top Cap
+55°C to -20°C. The should not be used in places where acid, • Ratse the jack to ren over vehicle support stands. 10. Pump Plunger
• Turn the delivery valve slowly counter – clockwise approx- 11. Pump Body
alkali or other corrosive gases exist. The jack can be used in 12. O-Ring
explosive atmosphere. imately ½ to 1 turn. If the piston is still extended push the 13. Safety Valve
piston down manually so that the piston is not left exposed
to the air thereby reducing exposure to rusting.
Safety instructions
TB8P
TB5P
TB2P
TB50P
TB30P
TB20P
TB12P
INSTRUCTION MANUAL
HYDRAULIC JACK