Professional Documents
Culture Documents
Open Field Network Unit
Open Field Network Unit
DL Series
OPEN FIELD
NETWORK UNIT
EtherCAT
DL-EC1A
PROFINET
DL-PN1
PROFIBUS DP
DL-PD1
EtherNet/IP TM
DL-EP1
DeviceNet TM
DL-DN1
CC-Link
DL-CL1
TCP/IP
DL-EN1
RS-232C
DL-RS1A
BCD
DL-RB1A
OPEN FIELD
NETWORK UNIT
TECHNOLOGY TO CHANGE
THE FACE OF FACTORY AUTOMATION
DL supports communication with open field networks.
IG Series
GT2/GT Series
Multi-Purpose CCD Laser Micrometer
Contact Sensor
IB Series
Thrubeam Type
Laser Detection
Sensor
PLC
DL-EC1A
EtherCAT
IL Series
CMOS Multi-function
Analogue Laser Sensor
When more units are used in combination with each other, more wiring is required.
If communicating with the DL Series, only two wires are required to supply power to the sensor.
Multiple preparation and wiring steps increased No need to trim the cables Terminal block unnecessary
the installation time. No additional wiring when replacing/adding sensors
Only a single communication cable is required between the PC/PLC and the DL Series for wiring.
Judgment result monitoring, measurement value readout, input & output control and setting changes
can be done via HMI, PLC or PC.
MONITORING MONITORING
To check the sensor status, the operator must directly check The sensor status can be monitored on an HMI, PLC or PC. Makes it easier to detect problems before
the sensor amplifier. an error occurs.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
SPECIFICATIONS
Device type
Record data Communication
Number of connections 1 CC-Link Network communication unit DL-CL1
PROFINET Update time 2 to 512 ms
Model DL-CL1
specifications GSDML Version Ver. 2.3
Compatible versions Ver. 2.00 / Ver. 1.10 (selectable)
Conformance class Conformance Class A
Ver. 2.00: 1 station, 8× / 2 stations, 8× / 4 stations, 2×;
Conformance test V2.2.4
Number of occupied stations (selectable)
Compliant protocol LLDP, DCP CC-Link Ver. 1.10: 1 / 2 / 4 stations (selectable)
specifications Type of station Remote device station
PROFIBUS DP Network communication unit DL-PD1 Transmission rate 156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps
Model DL-PD1 Setting of station numbers 1 to 64
Device type DP-V1 Slave (D-sub 9 pin, Number of the ports: 1)
Communication speed 9.6 kbps to 12 Mbps TCP/IP Network communication unit DL-EN1
PROFIBUS DP
specifications 9.6 / 19.2 / 45.45 / 93.75 kbps : 1200 m Model DL-EN1
Cable length 187.5 kbps : 1000 m, 500 kbps : 400 m
1.5 Mbps : 200 m, 3 / 6 / 12 Mbps : 100 m Transmission rate 100Mbps (100BASE-TX)
Ethernet STP cable or Category 5 or higher UTP cable
Transmission medium
Specifications (100BASE-TX)
EtherNet/IP TM Network communication unit DL-EP1 Maximum cable length 100 m (Distance between DL-EN1 and Ethernet switch)
Performance Socket communication,
Model DL-EP1 TCP socket 1
specifications no-protocol commands, ASCII
Cyclic Communication
Compatible Functions Message communication (Explicit messaging)
Compatible with UCMM and Class 3 RS-232C Network communication unit DL-RS1A
EtherNet/IP TM Number of connections 64
Model DL-RS1A
Specifications RPI (Transmission cycle) 0.5 to 10000 ms (0.5 ms unit)
Communication Method Full duplex
Tolerable communication bandwidth for
6000 pps Synchronization Method Start-stop
cyclic communication RS-232C
Conformance Test Compatible with Version A7 Specifications Transmission Code ASCII
Baud rate 2400/4800/9600/19200/38400 bps
10
maximum of 73.6
max.170° 5°
1.9
1.8
(39.0)
38.1
34.6
(38.5) 34.1
(0.2)
43.5 35.4
43.5 35.4 (0.2) 94.5
94.5
When cover open, maximum of 142.7
22.5 22.5
29.4 29.4 29.4
When cover open, maximum of 58.3
35.5 35.5
49.5 49.5
(48.2) 37.2 53.4
Max.125° 43.8 Max.125°
2.4 2.4 (57.8) 37.1
www.keyence.com
Copyright (c) 2016 KEYENCE CORPORATION. All rights reserved. DL-WW-C4-GB 1048-4 600K15