Professional Documents
Culture Documents
LEHW8815
LEHW8815
FEATURES
Engine Design Gas Engine Rating Pro (GERP)
- Tough and durable, built on industry standard G3300 GERP is a PC-based program designed to provide site
platform performance capabilities for Cat® natural gas engines
- Caterpillar supplied air/fuel ratio control and three- for the gas compression industry. GERP provides
way catalyst designed specifically for this engine to engine data for your site’s altitude, ambient temperature,
provide superior emissions control with NSPS and Non- fuel, engine coolant heat rejection, performance data,
Attainment zone compliance installation drawings, spec sheets, and pump curves.
- 0.5 g and 1 g NOx settings available
Product Support Offered Through Global Cat Dealer
- Integrated operator interface panel, TWC and AFRC
Network
reduces hands-on time with the engine
- Operator interface panel allows setup and servicing More than 2,200 dealer outlets
without a laptop Cat factory-trained dealer technicians service every
- Runs on a broad range of fuels and speeds at any aspect of your petroleum engine
emissions level Caterpillar parts and labor warranty
- Factory installed components with single connection
Preventive maintenance agreements available for repair-
point eases packaging
before-failure options
Advanced Digital Engine Management S•O•SSM program matches your oil and coolant samples
The ADEM A4 system represents the next generation of against Catepillar set standards to determine:
engine management systems while reducing the number - Internal engine component condition
of mechanical components and easing troubleshooting. - Presence of unwanted fluids
Features include: - Presence of combustion by-products
• Air/Fuel Ratio Control (AFRC) - Site-specific oil change interval
• Electronic ignition Over 80 Years of Engine Manufacturing Experience
• Electronic governing/speed control Over 60 years of natural gas engine production
• Start/stop logic Ownership of these manufacturing processes enables
• Engine protection & monitoring Caterpillar to produce high quality, dependable products.
Full Range of Attachments -C ast engine blocks, heads, cylinder liners, and flywheel
Large variety of factory-installed engine attachments housings
reduces packaging time - Machine critical components
- Assemble complete engine
Web Site
For all your petroleum power requirements, visit
HYPERLINK “http://www.catoilandgas.cat.com”
www.catoilandgas.cat.com.
LEHW8815-04 Page 1 of 4
G3306B TA GAS PETROLEUM ENGINE
153 bkW (205 bhp)
STANDARD EQUIPMENT
Air Inlet System Fuel System
Air cleaner — intermediate duty, dry Air/fuel ratio control
Air cleaner rain cap (shipped loose) Gas pressure regulator
Service indicator Requires 82.7-172.4 kPa (12-25 psi) gas
Control System Natural gas carburetor
ADEM A4 Ignition System
Cooling System ADEM A4 ignition
Thermostats and housing — full open Lube System
temperature 97°C (207°F) Crankcase breather, top mounted
Jacket water pump — gear-driven, centrifugal, non- Oil cooler
self-priming Oil filter
Aftercooler water pump, gear driven, centrifugal, non- Oil pan, full sump
self-priming Oil filler and dipstick
Aftercooler core, for treated water Protection System
Exhaust System The following parameters include alarm and
Exhaust manifolds — watercooled shutdown
Exhaust elbow — dry - inlet manifold air temperature
127 mm (5 in) - inlet manifold air pressure
Three-way catalyst — 1.0 g NOx and 0.5 g NOx - oil pressure
catalyst options - oil temperature
Flywheels & Flywheel Housings - coolant temperature
Flywheel, SAE No. 1 - engine speed (overspeed)
Flywheel housing, SAE No. 1 - battery voltage
SAE standard rotation - catalyst inlet/outlet temperature (sensors shipped
loose)
Display only — service hours
OPTIONAL EQUIPMENT
Charging Alternator Guards
24V, 35A alternator Fan guard
24V, 35A CSA alternator* Damper guard
Cooling System Ignition System
Radiators — JW only CSA certified electronics and ignition*
Raw water aftercooler Instrumentation
Jacket water pump inlet adapter Operator interface panel
Exhaust System Operator interface panel enclosure
Exhaust flex fitting — ANSI flange 15’, 20’ and 50’ interconnect harness
Exhaust elbow Starting System
Exhaust flange — ANSI flange Air pressure regulator
Air start silencer
Vane starter
Electric starter
Turbine starter
LEHW8815-04 Page 2 of 4
G3306B TA GAS PETROLEUM ENGINE
153 bkW (205 bhp)
TECHNICAL DATA
G3306B Gas Petroleum Engine — 1800 rpm
DM8967-00 DM8799-00
0.5 g NOx NTE 1.0 g NOx NTE
Engine Power
@ 100% Load bkW (bhp) 152.87 (205) 152.87 (205)
Aftercooler Temperature
JW Temperature °C (°F) 98.89 (210) 98.89 (210)
SCAC Temperature °C (°F) 54.44 (130) 54.44 (130)
Emissions (NTE)*
NOx g/bkW-hr (g/bhp-hr) 0.67 (0.5) 1.34 (1.0)
CO g/bkW-hr (g/bhp-hr) 2.68 (2.0) 2.68 (2.0)
CO2 g/bkW-hr (g/bhp-hr) 689.29 (514) 689.29 (514)
VOC** g/bkW-hr (g/bhp-hr) 0.16 (0.12) 0.16 (0.12)
Fuel Consumption***
@ 100% Load MJ/bkW-hr (Btu/bhp-hr 11.41 (8066) 11.41 (8066)
@ 75% Load MJ/bkW-hr (Btu/bhp-hr) 11.96 (8454) 11.96 (8454)
Heat Balance
Heat Rejection to Jacket Water
JW bkW (Btu/min) 159.24 (9056) 159.24 (9056)
OC bkW (Btu/min 23.76 (1351) 23.76 (1351)
Heat Rejection to Aftercooler
@ 100% Load bkW (Btu/min 8.35 (475) 8.35 (475)
Heat Rejection to Exhaust
@ 100% Load bkW (Btu/min 121.51 (6910) 121.51 (6910)
Heat Rejection to Atmosphere
@ 100% Load bkW (Btu/min 19.41 (1104) 19.41 (1104)
Exhaust System
Exhaust Gas Flow Rate m3/min (cfm) 28.01 (989) 28.01 (989)
Exhaust Temperature — Catalyst
Outlet @ 100% Load °C (°F) 590.00 (1094) 590.00 (1094)
Intake System
Air Inlet Flow Rate
@ 100% Load m3/min (scfm) 8.64 (305) 8.64 (305)
LEHW8815-04 Page 3 of 4
G3306B TA GAS PETROLEUM ENGINE
153 bkW (205 bhp)
1262 (49.7)
dimensions
Length mm (in) 1539 (60.6)
Width mm (in) 978 (38.5)
Height mm (in) 1262 (49.7)
Shipping Weight kg (lb) 1111 (2450)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, ADEM, S•O•S, “Caterpillar Yellow” and the “Power Edge” trade dress, as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.