1)
2)
3)
4)
5)
6)
8)
The primary work products of the rbi assessment and management approach
and implementation of rbi provides
A. Overall reduction of risk and acceptance of current risk
B. Overall increase of risk and acceptance of risk
C. Overall reduction of risk and negligence of current risk
D. Over all increase of risk and negligence of current risk
Rbi is based on
‘A. Sound, proven risk assessment and management principles
B. Risk mitigation principles
C. Hazop principles
D. Pha principles
Utilization of rbi provides a vehicle for
A. Continuously improving the inspection of facilities and systematically
reducing the risk associated with pressure boundary failures.
Rbi as an integrated management tool that complement:
A. Pha and rem
. Produces inspection and maintenance plans for equipment that should
be implemented to provide. and
Rbi, reliable and safe operation
Rp 580 significantly targeted at the application of rbi in the ...
owindustry
A. Hydrocarbon and chemical process
Rp 580 is intended to promote consistency and quality in identification,
assessment and management of risks pertaining to. which could lead
BO .vvemsnners
A. Material deterioration, loss of containment
The risk assessment programme which focuses on process unit design and
operating practices and their adequacy given the unit’s current or anticipated
operating conditions
AL Rbi
B. Pha
Cc. Hazop
D. Rem9) The program that is focused on understanding failure modes, addressing the
modes and therefore improving the reliability of equipment and process
facilities,
AL Rbi
8. Pha
Cc. Rem
D. — Hazop
10) The programme that focused on maintaining the mechanical integrity of
pressure equipment items and minimizing the risk of loss of containment due to
deterioration.
AL RDI
B. Pha
Cc. Rem
D. — Hazop
Is not a substitute for a process hazards analysis (pha) or hazop
AL Rbi
B. Pha
Cc. Rem
D. — Hazop
12) The following types of pressurized equipment and associated components
covered by rbi
A. Rotating equipment
8. Turbines
C. Pressurized pumps
13) The primary audience for rp 580 is
A. Inspection and materials engineering personnel
B. Maintenance personnel
C. Only inspection personnel
D. Only materials engineering personnel
14) Rbi requires the commitment and cooperation of the
Total organization
Inspection
Maintenance
Materials engineering
goRP15) Out come of an event
A. Consequence
BL Risk
c. Event
16) Consequence is always.......... For safety aspects
A. Negative
B. Positive
Cc. Neutral
17) The reduction in the ability of a component to provide its intended purpose of
containment of Fluids.
A. Deterioration
B. Damage
C. Degradation
D. Thinning
18) Occurrence of a particular set of circum: stances. Is called an
AL Event
B. Consequence
Cc. Risk
19) The event may be
A. Singular or multiple
B. Certain or uncertain
C. Loss or gain
D. Negative or positive
20) An analytical tool that organizes and characterizes potential accidents in a
logical and graphical manner
A. Event tree
B. Event
C. Outcome
D. Consequence21) Termination of the ability of a system, structure, or component to perform its
required function of containment of fluid (le loss of containment).
A. Failure
B. Risk
C. Outcome
22) Small hole, crack or rupture are examples of
A. Failure modes
B. Failure
C. Loss