Professional Documents
Culture Documents
2. Engineering materials are divided into two main categories list them
14. What are the main term used in fault diagnosis which is a systematic approach to find
the defect?
25. What are the criteria for measuring the properties of oil?
32. What is the function of grooves in the inner surface of plain bearings
33. What are the three states of lubrication?
34. The load-carrying capacity of a bearing is determined by three conditions what are they.
47.What are the parameters to be considered before installing of any machine equipment’s?
50.In the selection of a pump for industrial uses, the following needs should be achieved :
Head 150 m.
Discharge Q = 5 m3/hr
51.In any pump as any mechanical equipment there are basic maintenance activities which
will be applied, what are these activities?
52..For the given data : Calculate the hydraulic and shaft power of a pump?
54.For the pump of Hydraulic power = 12.4, Shaft power = 17.71kw, -density of fluid =
1000 (kg/m3), g – gravity = 9.81 (m/s2), h – differential head = 65(m)
Calculate.
1. Pump efficiency
2. Pump flow capacity
57. To transfer natural gases from fields to the end users, capacity needs were as follows :
58...Write the physical components of hydraulic system. For the shown figure?
59. Identify the bearing and load type for each bearing shown in the sketches below:
1 2
60. What are the different types of power plant?
61. Write any four basis on which pumps are classified?
62. Write the names of the seals shown below.