Professional Documents
Culture Documents
Impedance 50 Ω
VSWR < 1.5
Isolation: Intrasystem > 30 dB > 28 dB
> 30 dB (806-960 // 1710-2180 MHz)
Isolation: Intersystem
> 30 dB (1710-2180 // 1710-2180 MHz)
Intermodulation IM3 < - 150 dBc (2 x 43 dBm carrier)
Max. Power per Input 250 W (at 50 ºC ambient temperature) 200 W (at 50 ºC ambient temperature)
Mechanical Specifications
Electrical datas shown in this dataseet is subjet to change w/o previous notice
Powered by :
page 1/2
Accessories / General Information
The Service Area is supplied as a separated module and allows easy and safe access
to the settings of the antenna. The Azimuth can be adjusted independently per sector into
the range described in the datasheet. The tilt range shall be set according to Kathrein Werke
recommendations. The Service area is valid for RCUs, DTMA and Mux installation.
Please ask your local partner or ESB SISTEMAS for further information.
FLANGE INTERFACE
Two differents flanges interfaxes can be supplied in order to make an easier and customize
installation on site. Default flange interface is RING method and optional is
SLIM POLE method (order separately) as shown below:
ACCESSORIES (OPTIONAL)
To be ordered separately
SHIPPING INFORMATION
PACKING QUANTITY LxWxH (mm) WEIGHT
979 684 + SA 1x 3000x650x790 260 kg
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issued has now become invalid.
page 2/2