Professional Documents
Culture Documents
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 15.4 15.7 15.8 16.0
Gain (dBi)
over all Tilts 15.3 ±0.5 15.6 ±0.5 15.7 ±0.5 15.8 ±0.5
Side lobe suppression for first side
> 16 > 18 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 63 ±2.5 60 ±2.5 60 ±2.5 59 ±3
Vertical 3dB beam width (°) 10.6 ±0.7 9.5 ±0.5 9.2 ±0.4 8.7 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 21 > 24 > 24 > 24
Cross polar ratio (dB) 0° > 17 > 18 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
1710 – 2200 (b1/b2)
Frequency range (MHz)
1710 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable
at mid Tilt 18.7 19.4
Gain (dBi)
over all Tilts 18.5 ±0.8 19.2 ±0.5
Side lobe suppression for first side
> 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 32 ±1 30 ±1
Vertical 3dB beam width (°) 6.2 ±0.5 5.6 ±0.4
VSWR < 1.5
Horizontal beam centers (°) ± 30 ± 26
Cross polar isolation (dB) Same beam: ≥ 25
Beam to beam isolation(dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 28 > 28
Cross polar ratio at boresight (dB) > 17 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
256
Product Product
List Category
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2022 x 359 x 178
68
Packing dimensions (H x W x D) (mm) 2400 x 430 x 255
Antenna weight (kg) 25.0
Clamps weight (kg) 4.2 (2 units)
(615)
Antenna packing weight (kg) 40.3 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 to +65
2022
1355
Frontal: 655 (at 150 km/h)
Wind load (N) Lateral: 200 (at 150 km/h)
Maximum: 690 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom
Accessories
52
Item Model Description Weight Units per antenna
Mechanical downtilt:
Downtilt kit ASMDT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
257
Product Product
List Category
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWxxxx……r1
HWxxxx……b1
HWxxxx……b2 b1 b2
r - Red b - Blue r1
258
Product Product
List Category