Professional Documents
Culture Documents
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Vertical 3dB beam width (°) 11 ±0.8 10 ±0.6 9.7 ±0.5 9.0 ±0.5
Electrical Properties
2 x (1695 - 2690) (LBy1/LTy2)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 16.2 16.7 16.9 16.7
Gain (dBi)
over all Tilts 16.1±0.5 16.5 ±0.6 16.7 ±0.6 16.5 ±0.6
Side lobe suppression for first side
> 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 66 ±6 61±6 60 ±6 59 ±6
Vertical 3dB beam width (°) 9.2 ±0.6 8.3 ±0.6 7.3 ±0.4 6.8 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1
A08260PD00v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
Impedance (Ω) 50
Grounding DC Ground
Coupling factor between calibration port and each antenna port (dB) -30 ±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.8
Calibration and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters
Co-polarization isolation between ports (dB) ≥ 25
With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1,Scenario-based beam 2 and Scenario-based beam 3 can be worked simultaneously.
Frequency range (MHz) 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Sub-beam1 Sub-beam2
at mid Tilt 17.1 17.8 17.9 18.0 17.1 17.8 17.9 18.0
Gain (dBi)
over all Tilts 17.0 ±0.9 17.7 ±0.9 17.8 ±0.9 17.9 ±0.9 17.0 ±0.9 17.7 ±0.9 17.8 ±0.9 17.9 ±0.9
Side lobe suppression for first side
> 16 > 16 > 16 > 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)
Vertical 3dB beam width (°) 9.8 ±0.9 8.9 ±0.9 7.7 ±0.5 7.1 ±0.5 9.8 ±0.9 8.9 ±0.9 7.7 ±0.5 7.1 ±0.5
Front to back ratio total, ±30° (dB) > 25 > 26 > 28 > 28 > 25 > 26 > 28 > 28
Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 16 > 15 > 15 > 16 > 16
2
A08260PD00v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
Single column beam Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 25
& Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Broadcast beam
Radiation Vertical 3dB beam width (°) 9.8 ±0.9 8.9 ±0.9 7.7 ±0.5 7.1 ±0.5
parameters
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
at mid Tilt 19.9 20.5 20.7 20.8
Gain (dBi)
over all Tilts 19.7 ±0.9 20.3 ±0.9 20.5 ±0.9 20.6 ±0.9
Vertical 3dB beam width (°) 4.4 ±0.4 4.0 ±0.4 3.5 ±0.3 3.0 ±0.3
Front to back ratio total, ±30° (dB) > 27 > 27 > 27 > 27
Vertical 3dB beam width (°) 4.4 ±0.4 4.0 ±0.4 3.5 ±0.3 3.0 ±0.3
Front to back ratio total, ±30° (dB) > 27 > 27 > 27 > 27
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams which including horizontal and
vertical plane, and the gain is the maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
3
A08260PD00v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206
68
Packing dimensions (H x W x D) (mm) 2360 x 560 x 260
(693)
Antenna packing weight (kg) 65.3 (Included clamps)
2099
1347
Frontal: 765(at 150 km/h)
Wind load (N) Lateral: 395 (at 150 km/h)
Maximum: 1000 (at 150 km/h)
Max. operational wind speed (km/h) 200
59
Connector position Bottom
Unit: mm
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12° 3.1 kg 1 (Separate packing)
HWMxxx……Lr1 e HWXxxx……..y3y4
HWMxxx……LBy1
e
HWMxxx……LTy2
HWMxxx……Rr2
HWMxxx……RBy3
HWMxxx……RTy4
r - Red y - Yellow B - Bottom array
T - ToP array L - Left array R - Right array
4T4R/8T8R-A 4T4R/8T8R-B
4
A08260PD00v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE
Sub-beam1 Sub-beam2
(1695 - 2690 MHz) (1695 - 2690 MHz)
5
A08260PD00v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)
-2x15.5i/2x17i/(18i|15.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with 6 Integrated RCUs - 2.0m
Scenario-based Beam 2
Scenario-based Beam 3
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 6 Issue: 2021-09-03