Professional Documents
Culture Documents
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 15.4 15.7 15.8 16.0
Gain (dBi)
over all Tilts 15.3 ±0.5 15.6 ±0.5 15.7 ±0.5 15.8 ±0.5
Side lobe suppression for first
> 16 > 18 > 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 63 ±2.5 60 ±2.5 60 ±2.5 59 ±3
Vertical 3dB beam width (°) 10.6 ±0.7 9.5 ±0.5 9.2 ±0.4 8.7 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 21 > 24 > 24 > 24
Cross polar ratio (dB) 0° > 17 > 18 > 17 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable
at mid Tilt 18.7 19.4
Gain (dBi)
over all Tilts 18.5 ±0.8 19.2 ±0.5
Side lobe suppression for first
> 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 32 ±1 30 ±1
Vertical 3dB beam width (°) 6.2 ±0.5 5.6 ±0.4
VSWR < 1.5
Horizontal beam centers (°) ± 30 ± 26
Cross polar isolation (dB) Same beam: ≥ 25
Beam to beam isolation(dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 28 > 28
Cross polar ratio at boresight (dB) > 17 > 15
Max. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
254
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 2022 x 359 x 178
Packing dimensions (H x W x D) (mm) 2400 x 430 x 255
Antenna weight (kg) 25.0
Clamps weight (kg) 3.6 (2 nuits)
Antenna packing weight (kg) 39.7 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 to +65
Frontal: 655 (at 150 km/h)
2022
1355
Wind load (N) Lateral: 200 (at 150 km/h)
Maximum: 690 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2.1 kg 1 (Separate packing)
Multi-beam
Pattern sample for reference
255
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx……r1
HWMxxx……b1
HWMxxx……b2
r - Red b - Blue
256