You are on page 1of 1

Introduction Power Technical Specifications

This switch provides 8 10/100/1000M ports. Power is supplied through an external DC IEEE 802.3 10BaseT
It was designed for easy installation and
power adapter. IEEE 802.3u 100BaseTX
high performance in an environment where Standards
IEEE 802.3ab 1000BaseT
traffic is on the network and the number of
IEEE 802.3x Flow control
8 Port Gigabit Ethernet Switch users increases continuously. Front Panel (LEDs) Number of Ports: 8
The small compact palm size was MAC Address: 8K
LED Indicators of 8 Port 10/100/1000M
specifically designed for small to medium Buffer Memory: 1.5Mb
Switch Features
workgroups. It can be installed where space Jumbo Frames: 9KB
is limited; moreover, it provides smooth Transmission Method: Store
LED Status Operation
network migration and easy upgrade to and Forward
Quick Installation Guide network capacity.
Power On Power is on.
Filtering/ 1000Mbps port –1,488,000pps
Off Power is off.
Forwarding 100Mbps port – 148,800pps
LINK/ACT On Port is for connection
Key Features Rates 10Mbps – 14,880pps
Off No connection.
10BaseT Cat. 3, 4, 5
Flashing Data is transmitting or
 8 Port 10/100/1000M Switch Transmission UTP/STP
Palm size with metal case receiving.
 Media 100BaseTX Cat. 5 UTP/STP
 Auto-learn of networking configurations 1000BaseT Cat. 5E UTP/STP
Auto-detect full/half-duplex modes for any Package Contents
 LED Indicators Power, Link/ACT
port
Before you start to install this switch, please Power Supply DC 5V/1.2A
 Dedicated full-duplex 2000Mbps
bandwidth verify your package that contains the Power
4 Watts (Max)
 Store-and-Forward switching methods following items: Consumption
 IEEE 802.3x flow control for full-duplex Dimensions 21 x 94 x 62 mm
and back-pressure flow control for  One Gigabit Ethernet Switch Operating
half-duplex  One Power Adapter 0 to 50 °C
Temperature
 Non-blocking & Non-head-of-line blocking  One Quick Installation Guide
Storage
full wire speed forwarding -20 to 80 °C
Temperature
 Auto-MDI/MDI-X function for any port
Smart plug & play Max. 90% RH
 Humidity
(non-condensing)

Note: If any of these items is found missing


or damaged, please contact your local
supplier for replacement.

You might also like