Professional Documents
Culture Documents
Vishay Siliconix: Features
Vishay Siliconix: Features
www.vishay.com
Vishay Siliconix
Power MOSFET
S
FEATURES
• Dynamic dv/dt rating
TO-220AB
• Repetitive avalanche rated Available
• P-channel
G Available
• 175 °C operating temperature
• Fast switching
• Ease of paralleling
S
D • Simple drive requirements
G D
• Material categorization: for definitions of compliance
P-Channel MOSFET please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
PRODUCT SUMMARY RoHS-compliant and / or parts that are non RoHS-compliant. For
VDS (V) -100 example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
RDS(on) (Ω) VGS = -10 V 0.60
Qg max. (nC) 18
DESCRIPTION
Qgs (nC) 3.0 Third generation power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
Qgd (nC) 9.0
ruggedized device design, low on-resistance and
Configuration Single cost-effectiveness.
The TO-220AB package is universally preferred for all
commercial-industrial applications at power dissipation
levels to approximately 50 W. The low thermal resistance
and low package cost of the TO-220AB contribute to its
wide acceptance throughout the industry.
ORDERING INFORMATION
Package TO-220AB
Lead (Pb)-free IRF9520PbF
Lead (Pb)-free and halogen-free IRF9520PbF-BE3
101 2.0
(Normalized)
VGS 1.5
Top - 15 V
- 10 V - 4.5 V
- 8.0 V 1.0
- 7.0 V
- 6.0 V
100 - 5.5 V 0.5
- 5.0 V 20 µs Pulse Width
Bottom - 4.5 V TC = 25 °C
0.0
100 101 - 60- 40 - 20 0 20 40 60 80 100 120 140 160 180
91074_01 - VDS, Drain-to-Source Voltage (V) 91074_04 TJ, Junction Temperature (°C)
VGS 900
VGS = 0 V, f = 1 MHz
Top - 15 V Ciss = Cgs + Cgd, Cds Shorted
- 10 V
- 8.0 V 750 Crss = Cgd
- ID, Drain Current (A)
- 6.0 V
- 5.5 V 600
- 5.0 V
Bottom - 4.5 V
450 Ciss
- 4.5 V
300 Coss
100 150
20 µs Pulse Width Crss
TC = 175 °C
0
100 101 100 101
91074_02 - VDS, Drain-to-Source Voltage (V) 91074_05 - VDS, Drain-to-Source Voltage (V)
Fig. 2 - Typical Output Characteristics, TC = 175 °C Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
20
ID = - 6.8 A
- VGS, Gate-to-Source Voltage (V)
25 °C VDS = - 80 V
16
- ID, Drain Current (A)
101 VDS = - 50 V
VDS = - 20 V
12
175 °C
4
20 µs Pulse Width For test circuit
100 VDS = - 50 V see figure 13
0
4 5 6 7 8 9 10 0 4 8 12 16 20
91074_03 - VGS, Gate-to-Source Voltage (V) 91074_06 QG, Total Gate Charge (nC)
Fig. 3 - Typical Transfer Characteristics Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
7.0
- ISD, Reverse Drain Current (A)
6.0
101
175 °C
4.0
100 25 °C 3.0
2.0
1.0
VGS = 0 V
10-1 0.0
1.0 2.0 3.0 4.0 5.0 25 50 75 100 125 150 175
91074_07 - VSD, Source-to-Drain Voltage (V) 91074_09 TC, Case Temperature (°C)
Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 9 - Maximum Drain Current vs. Case Temperature
RD
103
Operation in this area limited VDS
5 by RDS(on)
VGS
D.U.T.
- ID, Drain Current (A)
2
RG -
102 +VDD
5
- 10 V
2 Pulse width ≤ 1 µs
100 µs Duty factor ≤ 0.1 %
10
5
1 ms Fig. 10a - Switching Time Test Circuit
TC = 25 °C
2 TJ = 175 °C
Single Pulse 10 ms
1 td(on) tr td(off) tf
2 5 2 5 2 5 VGS
1 10 102 103
10 %
91074_08 - VDS, Drain-to-Source Voltage (V)
90 %
VDS
10
Thermal Response (ZthJC)
D = 0.5
1
0.2
0.1 PDM
0.05
0.1 0.02 t1
0.01 Single Pulse t2
(Thermal Response) Notes:
1. Duty Factor, D = t1/t2
2. Peak Tj = PDM x ZthJC + TC
10-2
10-5 10-4 10-3 10-2 0.1 1 10
L
VDS
Vary tp to obtain QG
- 10 V
required IAS
Fig. 12a - Unclamped Inductive Test Circuit Fig. 13a - Basic Gate Charge Waveform
50 kΩ
VDS
12 V 0.2 µF
0.3 µF
-
VDD
D.U.T. + VDS
tp
VGS
VDS
- 3 mA
Top - 2.8 A
800 - 4.8 A
Bottom - 6.8 A
600
400
200
VDD = - 25 V
0
25 50 75 100 125 150 175
- - +
Rg • dV/dt controlled by Rg +
• ISD controlled by duty factor “D” VDD
• D.U.T. - device under test -
Note
• Compliment N-Channel of D.U.T. for driver
VGS = - 10 Va
Reverse
recovery Body diode forward
current current
dI/dt
D.U.T. VDS waveform
Diode recovery
dV/dt
VDD
Re-applied
voltage
Body diode forward drop
Inductor current
ISD
Ripple ≤ 5 %
Note
a. VGS = - 5 V for logic level and - 3 V drive devices
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?91074.
A
E
F
ØP
Q
H(1)
D
1 2 3
L(1)
M*
b(1)
L
C
b
e
J(1)
e(1)
MILLIMETERS INCHES
DIM.
MIN. MAX. MIN. MAX.
A 4.24 4.65 0.167 0.183
b 0.69 1.02 0.027 0.040
b(1) 1.14 1.78 0.045 0.070
c 0.36 0.61 0.014 0.024
D 14.33 15.85 0.564 0.624
E 9.96 10.52 0.392 0.414
e 2.41 2.67 0.095 0.105
e(1) 4.88 5.28 0.192 0.208
F 1.14 1.40 0.045 0.055
H(1) 6.10 6.71 0.240 0.264
J(1) 2.41 2.92 0.095 0.115
L 13.36 14.40 0.526 0.567
L(1) 3.33 4.04 0.131 0.159
ØP 3.53 3.94 0.139 0.155
Q 2.54 3.00 0.100 0.118
ECN: E21-0621-Rev. D, 04-Nov-2021
DWG: 6031
Note
• M* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for HVM
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.