Professional Documents
Culture Documents
Lte Throughput Improvement Parameter PR
Lte Throughput Improvement Parameter PR
Huawei recommended valus to "OFF" but trail can be done with "ON"
It should be "ON"
Huawei recommended value is "OFF" but if this is "ON", the CQI adjustment is
performed at a large step in case of significant signal quality changes,
accelerating the IBLER convergence and therefore increasing the downlink
throughput. So trial is recomended in a cluster with "ON" setting.
It should be "ON"
It should be "ON"
It should be "ON"
It should be "ON"
Huawei recomende value is "OFF" though throughput can increase as this
could lead to increase drop and poor HO success rate. But trail can be done to
see the impact with "ON".
This should be "ON"
This should be "ON"
This should be "GAP_PATTERN_TYPE_2"
Trial should be done with "4 dB"
This should be "1"
It should be "ON"
This should be "ON" for medium and light loaded cells
It should be "OFF"
It should be "ON"