APPLICATION NALCO 2000 is intended for industrial use only. It NALCO 2000 is a multifunctional, nitrite-based should not be fed to potable water systems. chemical treatment used for the control of Please refer to the Material Safety Data Sheet for corrosion in closed cooling systems and the most recent approval information. chilled water systems. NALCO 2000 is a liquid product containing a combination of MATERIALS OF COMPATIBILITY ferrous and non-ferrous corrosion inhibitors, a Compatible Not Compatible Not Tested non-carbonate buffer, scale inhibitors, Brass Aluminum Plasite 4005 dispersants and a leak detection dye. Polyethylene Plasite 6000 Polypropylene Plasite 7122 PHYSICAL & CHEMICAL Stainless Steel 304 PROPERTIES Stainless Steel 316 These properties are typical. Refer to the Buna-N Material Safety Data Sheet (MSDS), Carbon Steel SECTION 9, for the most current data. Hypalon Color Clear to hazy, Neoprene deep red Nickel Form Liquid Polyurethane Odor Slight organic Polyvinyl chloride (PVC) Density 9.3 - 9.7 lb/gal Teflon (1.12 - 1.16 kg/L) Vinyl Solubility in Water Complete Viton o Specific Gravity @ 60 F 1.12 - 1.16 (15oC) DOSAGE AND FEEDING For complete dosage and feeding pH (neat) 11.1 - 11.8 o o recommendations, consult your Nalco Viscosity @ 60 F (15 C) 48 cp representative. Freeze Point -20oF (-29oC) Flash Point (PMCC) None ENVIRONMENTAL AND TOXICITY DATA Freeze-Thaw Recovery Complete Biological Oxygen Demand Not Applicable ACTIVE CONSTITUENTS (5-day BOD5) Component Function Nitrite Mild Steel Corrosion Chemical Oxygen Demand (COD) 67,000 ppm Inhibitor Total Organic Carbon (TOC) 37,000 ppm Nitrate Aluminum Corrosion Inhibitor Refer to Section 11 and 12 of the MSDS for all Tolyltriazole (TT) Copper Corrosion Inhibitor available, mammalian and aquatic toxicity Borate Buffer information. Silicate Aluminum Corrosion Inhibitor SAFETY AND HANDLING Polyacrylate General Dispersant NALCO 2000 is a mildly alkaline product that may cause eye or skin irritation. Chemical resistant gloves and safety goggles should be worn when handling NALCO 2000. Read SECTION 8 of REMARKS the Material Safety Data Sheet for specific If you need assistance or more information on this PPE and SECTION 3 for health effects product, please call your nearest Nalco information. Representative. For more news about Nalco Company, visit our website at www.nalco.com. NALCO 2000 contains a reportable quantity (RQ) substance. All storage vessels of For Medical and Transportation Emergencies NALCO 2000 should be in secondary involving Nalco products, please see the Material containment if the storage capacity exceeds Safety Data Sheet for the phone number. the RQ of 2,000 pounds. See SECTION 15 of the Material Safety Data Sheet for this ADDITIONAL INFORMATION information. NALCO is a registered trademark of Nalco Company (9/7/04) STORAGE NALCO 2000 should be stored in a location where the product temperature can be kept between -20oF (-29oC) and 120oF (49oC).
Recommended in-plant storage limit is six
months.
Nalco Pacific Pte Ltd 2 International Business Park • #02-20 The Strategy Tower 2 • Singapore 609930