Professional Documents
Culture Documents
Yw1p 1eqm3r
Yw1p 1eqm3r
Non-illuminated Illuminated
Easy Operation
• Push-to-lock, Pull/Turn-to-release
YW emergency stop switches can be unlatched by either pulling or
turning the operator.
Unlatching by Unlatching by
pulling turning
B-269
Switches & Pilot Lights
Save
New Contact
Block Design YW series
Metal bezels are available for
pushbuttons, illuminated
APEM
pushbuttons, selector switches,
and key selector switches. Switches &
Pilot Lights
Control Boxes
FA CB CB FA CB Emergency
Stop Switches
Enabling
10 10 10 Switches
CB Safety Products
30
Explosion Proof
15 15
CB: Contact block Terminal Blocks
30 FA: Full-voltage adapter
Relays & Sockets
The contact block design reduces the depth behind the panel. Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Reliable Interfaces
Sensors
AUTO-ID
Retained Locking Lever • Heavy-Duty Rugged Construction
• Self-Cleaning Wiping-Action Contacts with Scored Contact Surfaces
Lock Unlock
➀
➁ ➀ Spring Flush Silhouette
ø22
Movable
Contact ø30
Stationary Miniature
Contact
Pilot Lights
(1) Normal State (2) Wiping (3) Fully Depressed
HW
Safety TW
YW
Integrated Finger-safe Terminal Cover
Degree of Protection: IP20 (From panel front: IP65)
B-270
Switches & Pilot Lights
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Circuit
Protectors Contact Ratings (Contact Block)
Power Supplies Rated Insulation Voltage 600V
Rated Thermal Current 10A
LED Illumination
Operating Voltage 24V 120V 240V 380V
Controllers AC Resistive Load (AC-12) 10A 10A 6A 2A
Operator
50/60 Hz Inductive Load (AC-15) 10A 6A 3A 1.9A
Interfaces Resistive Load (DC-12) 8A 2.2A 1.1A —
DC
Sensors Inductive Load (DC-13) 4A 1.1A 0.55A —
AUTO-ID
YW
B-271
ø22 YW Series Switches & Pilot Lights
Operating temperature: –20 to +55°C (no freezing) R0.8 max. Explosion Proof
The 3.2-mm-wide key recess
Operating Operating humidity: 45 to 85% RH (no condensation) 3.2 +0.2
0 is necessary when the anti-rotation
Conditions Storage temperature: –45 to +80°C ø22
.3 +0
.4
ring is used. Terminal Blocks
Storage humidity: 95% RH maximum 0
24.1 +0.4
0
Degree of From panel front: IP65 (IEC 60529) Relays & Sockets
Protection Terminal: IP20 (IEC 60529) Circuit
Protectors
Insulation
100 MΩ B
Resistance A Power Supplies
Dielectric Contact block: 2,500V, 1 minute
LED Illumination
Strength Pilot light: 2,000V, 1 minute
<Emergency stop switch> Controllers
Operating extremes / Damage limits:
Operator
10 to 500 Hz, amplitude 0.35 mm. acceleration 50 m/s2 (5G) Interfaces
Vibration
<Pushbutton, pilot light, illluminated pushbutton, selector Unit A (mm) B (mm)
Resistance Sensors
switch, and key selector switch>
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Emergency stop switch 50 min. 50 min.
Damage limits: 30 Hz, amplitude 1.5 mm Pushbutton AUTO-ID
Selector switch 50 min. 30 min.
<Emergency stop switch>
Key selector switch
Operating extremes: 150 m/s2 (10G)
Damage limits: 1,000 m/s2 (100G) Mushroom pushbutton 50 min. 40 min.
Shock
<Pushbutton, pilot light, illluminated pushbutton, selector Pilot light (with removable lamp terminal) 30 min.∗ 30 min. Flush Silhouette
Resistance
switch, and key selector switch> Pilot light (unibody) 50 min. 30 min.
Operating extremes: 100 m/s2 (10G) ø16
Damage limits: 1,000 m/s2 (100G) ∗ Keep a minimum spacing of 50 mm when using a lamp of over 1W.
<Emergency stop switch> ø22
250,000 (single contact block)
ø30
<Pushbutton and illuminated pushbutton>
Momentary: 5,000,000 (single contact block)
Mechanical Miniature
1,000,000 (double contact block)
Life (minimum
Maintained: 250,000 (single contact block)
operations) Pilot Lights
100,000 (double contact block)
<Selector switch and key selector switch>
250,000 (single contact block)
100,000 (double contact block)
<Emergency stop switch> HW
Electrical Life 100,000 (single contact block)
(minimum <Pushbutton, selector switch, and key selector switch> TW
operations) 100,000 (single contact block)
50,000 (double contact block) YW
B-272
Switches & Pilot Lights
ø22 YW Series Emergency Stop Switches
Terminal Blocks
Power Supplies
41.4
LED Illumination
0
Controllers ø4
45.8 32.5 30
Operator
Interfaces
Sensors
AUTO-ID
Illuminated Emergency Stop Switches (Pushlock Pull/Turn Reset)
Package Quantity: 1
Contact Block Mounting Position Lens Color
Flush Silhouette Style Lamp Contacts Part No. ➂ Operating Voltage Code
1 2 3 Code
ø16 ø40mm Mushroom 1NC — FA NC YW1L-V4E01Q0R
0: without lamp
ø22 Without Lamp 2NC NC FA NC YW1L-V4E02Q0R
250V AC/DC max.
ø30 1NO-1NC NO FA NC YW1L-V4E11Q0R
1NC — FA NC YW1L-V4E01Q➂R 2: 6V AC/DC
Miniature
3: 12V AC/DC
LED 2NC NC FA NC YW1L-V4E02Q➂R 4: 24V AC/DC Red only
Pilot Lights
H: 110V AC/DC
1NO-1NC NO FA NC YW1L-V4E11Q➂R M3: 230/240V AC/DC
1NC — FA NC YW1L-V4E01Q➂R
5: 6V AC/DC
HW Incandescent 2NC NC FA NC YW1L-V4E02Q➂R 6: 12V AC/DC
7: 24V AC/DC
1NO-1NC NO FA NC YW1L-V4E11Q➂R
TW
• Specify an operating voltage code in place of ➂ in the Part No. FA: Full voltage adapter
YW
• When pressed, the button is locked in the depressed position, and is reset when either pulled or turned clockwise.
Dimensions
M3.5 Terminal Screw Panel Thickness 0.8 to 6 Contact Block Mounting Position
Full-Voltage Adapter
3
1 2
10 10 10
41.4
0
ø4
45.8 32.5 30
B-273
ø22 YW Series Switches & Pilot Lights
HW
10
0.5
M3.5 Terminal Screw
Contact Block
TW
Lock YW
Flush Locking Ring
28.6
(Button Diameter)
ø23.6
41.4
ø29
45.8 11 30
Extended Mushroom
28.6
28.6
(Button Diameter)
(Button Diameter)
ø23.6
41.4
41.4
ø40
ø29
11
30 11
45.8 19 45.8 20.5 30
All dimensions in mm.
B-274
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
HW
10
TW
Contact Block
Lock
YW Flush Locking Ring
28.6
(Button Diameter)
41.4
ø23.6
.5
ø29
45.8 11.3 30
Lock Lock
Extended Locking Ring Mushroom Locking Ring
28.6
28.6
(Button Diameter)
(Button Diameter)
41.4
41.4
ø23.6
ø40
.5
ø29
11.3 11.3
30 30
45.8 19 45.8 20.5
All dimensions in mm.
B-275
ø22 YW Series Switches & Pilot Lights
Dimensions
Flush Silhouette
Flush Flush Marking
Locking Ring Locking Ring ø16
ø22
ø30
HW
TW
42.0 9.5 42.0 10
YW
M3.5 M3.5
Terminal Screw Terminal Screw
Gasket Gasket
Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6
.8 8
ø2
9 9.
ø2
B-276
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
100/110V AC YW1P-1BEH5➁
230/240V AC YW1P-1BEM45➁
B-277
ø22 YW Series Switches & Pilot Lights
100/110V AC YW1P-2EH5➁
A (amber), C (clear),
200/220V AC YW1P-2EM5➁ G (green), R (red), S (blue),
Incandescent
W (white), Y (yellow)
115/120V AC YW1P-2EH25➁ Built-in incandescent lamp: LS-T6
230/240V AC YW1P-2EM45➁
B-278
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
APEM
Switches &
Pilot Lights
Control Boxes
M3.5 Terminal Screw Gasket Gasket
M3.5 Terminal Screw
Emergency Locking Ring Locking Ring
9.8
9.8
Stop Switches
ø2
ø2
Enabling
Switches
24
24
Safety Products
46.2 9.5 29.6 46.2 10 29.6
Explosion Proof
Terminal Blocks
Transformer Transformer
Relays & Sockets Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Gasket Gasket
M3.5 Terminal Screw M3.5 Terminal Screw
Operator Locking Ring Locking Ring
9.8
9.8
Interfaces
ø2
ø2
Sensors
24
24
AUTO-ID
Flush Silhouette
ø30
Miniature
Pilot Lights
Gasket Gasket
M3.5 Terminal Screw M3.5 Terminal Screw
Locking Ring Locking Ring
9.8
9.8
ø2
ø2
HW
24
24
TW
46.2 15.5 29.6 46.2 15.5 29.6
YW
Transformer Transformer
Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6
Gasket Gasket
M3.5 Terminal Screw M3.5 Terminal Screw
Locking Ring Locking Ring
9.8
9.8
ø2
ø2
24
24
B-279
ø22 YW Series Switches & Pilot Lights
B-280
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
ø30
Dimensions
Miniature
(Illuminated Pushbuttons with Plastic Bezel)
Pilot Lights Panel Thickness: 0.8 to 6 Contact Block Mounting Position
M3.5 Terminal Screw
Full-voltage Adapter 3
Gasket 1 2
10 10 10
HW
TW
0.5
M3.5 Terminal Screw
YW Contact Block
Extended
28.6
(Lens Diameter)
ø23.6
41.4
ø29
11
30
45.8 19
28.6
(Lens Diameter)
41.4
41.4
ø40
.2
ø28
11
45.8 19 30
45.8 20.5 30
All dimensions in mm.
B-281
ø22 YW Series Switches & Pilot Lights
B-282
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
ø30
Dimensions (Illuminated Pushbutton with Metal Bezel)
Miniature Panel Thickness: 0.8 to 6 Contact Block Mounting Position
M3.5 Terminal Screw
Pilot Lights Full-voltage Adapter Gasket 3
1 2
10 10 10
41.4
.5
ø29
11.3
30
45.8 19
Lock Lock
Extended with Full Shroud
Mushroom Locking Ring Locking Ring
28.6
28.6
(Lens Diameter)
(Lens Diameter)
ø23.6
41.4
41.4
ø40
.5
ø29
11.3
30 30
45.8 20.5 45.8 19.2
All dimensions in mm.
B-283
ø22 YW Series Switches & Pilot Lights
APEM
Switches &
No. of Contact Contact Block Operator Position Spring Return Pilot Lights
Maintained — —
Positions Configuration Mounting Position L R – from Right
Control Boxes
1 NO ●
1NO Emergency
2 YW1S-2E10 YW1S-21E10 — —
(10) Stop Switches
3
1 Enabling
1NC Switches
2 YW1S-2E01 YW1S-21E01 — —
(01)
3 NC ● Safety Products
1 NO ●
2NO
2 YW1S-2E20 YW1S-21E20 — — Explosion Proof
(20)
3 NO ●
1 NC ● Terminal Blocks
2NC
90° 2 YW1S-2E02 YW1S-21E02 — —
(02) Relays & Sockets
2-Position 3 NC ●
1 NO ● Circuit
1NO-1NC
L R 2 YW1S-2E11 YW1S-21E11 — — Protectors
(11)
3 NC ●
Power Supplies
1 NO ●
3NO
2 NO ● YW1S-2E30 YW1S-21E30 — —
(30) LED Illumination
3 NO ●
1 NC ●
3NC Controllers
2 NC ● YW1S-2E03 YW1S-21E03 — —
(03)
3 NC ● Operator
1 NO ● Interfaces
2NO-1NC
2 NC ● YW1S-2E21 YW1S-21E21 — — Sensors
(21)
3 NO ●
1 NO ● AUTO-ID
1NO-2NC
2 NC ● YW1S-2E12 YW1S-21E12 — —
(12)
3 NC ●
No. of Contact Contact Block Operator Position Spring Return Spring Return Spring Return
Maintained
Positions Configuration Mounting Position L C R from Right from Left Two-Way
1 NO ● Flush Silhouette
2NO
2 YW1S-3E20 YW1S-31E20 YW1S-32E20 YW1S-33E20
(20) ø16
3 NO ●
1
2NO ø22
2 NO ● ● YW1S-3E20N1 YW1S-31E20N1 YW1S-32E20N1 YW1S-33E20N1
(20N1)
3 NO ●
ø30
1 NC
2NC
2 YW1S-3E02 YW1S-31E02 YW1S-32E02 YW1S-33E02
(02) Miniature
3 NC
1 Pilot Lights
2NC
2 NC ● YW1S-3E02N1 YW1S-31E02N1 YW1S-32E02N1 YW1S-33E02N1
(02N1)
3 NC
1 NO ●
1NO-1NC
2 YW1S-3E11 YW1S-31E11 YW1S-32E11 YW1S-33E11
(11)
3 NC HW
1 NC
1NO-1NC
45° 2 YW1S-3E11N1 YW1S-31E11N1 YW1S-32E11N1 YW1S-33E11N1 TW
(11N1)
3-Position 3 NO ●
1 NO ● YW
C 1NO-1NC
L R 2 NC ● YW1S-3E11N2 YW1S-31E11N2 YW1S-32E11N2 YW1S-33E11N2
(11N2)
3
1
1NO-1NC
2 NC ● YW1S-3E11N3 YW1S-31E11N3 YW1S-32E11N3 YW1S-33E11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW1S-3E11N4 YW1S-31E11N4 YW1S-32E11N4 YW1S-33E11N4
(11N4)
3 NC
1 NO ●
3NO
2 NO ● ● YW1S-3E30 YW1S-31E30 YW1S-32E30 YW1S-33E30
(30)
3 NO ●
1 NC
3NC
2 NC ● YW1S-3E03 YW1S-31E03 YW1S-32E03 YW1S-33E03
(03)
3 NC
1 NO ●
2NO-1NC
2 NC ● YW1S-3E21 YW1S-31E21 YW1S-32E21 YW1S-33E21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW1S-3E12 YW1S-31E12 YW1S-32E12 YW1S-33E12
(12)
3 NC
B-284
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
APEM
Switches &
Pilot Lights No. of Contact Contact Block Operator Position Spring Return
Maintained — —
Positions Configuration Mounting Position L R – from Right
Control Boxes
1 NO ●
Emergency 1NO
2 YW4S-2E10 YW4S-21E10 — —
Stop Switches (10)
3
Enabling 1
Switches 1NC
2 YW4S-2E01 YW4S-21E01 — —
(01)
Safety Products 3 NC ●
1 NO ●
2NO
Explosion Proof 2 YW4S-2E20 YW4S-21E20 — —
(20)
3 NO ●
Terminal Blocks 1 NC ●
2NC
90° 2 YW4S-2E02 YW4S-21E02 — —
Relays & Sockets (02)
2-Position 3 NC ●
Circuit 1 NO ●
1NO-1NC
Protectors L R 2 YW4S-2E11 YW4S-21E11 — —
(11)
3 NC ●
Power Supplies
1 NO ●
3NO
2 NO ● YW4S-2E30 YW4S-21E30 — —
LED Illumination (30)
3 NO ●
1 NC ●
Controllers 3NC
2 NC ● YW4S-2E03 YW4S-21E03 — —
(03)
Operator 3 NC ●
Interfaces 1 NO ●
2NO-1NC
Sensors 2 NC ● YW4S-2E21 YW4S-21E21 — —
(21)
3 NO ●
AUTO-ID 1 NO ●
1NO-2NC
2 NC ● YW4S-2E12 YW4S-21E12 — —
(12)
3 NC ●
No. of Contact Contact Block Operator Position Spring Return Spring Return Spring Return
Maintained
Positions Configuration Mounting Position L C R from Right from Left Two-Way
Flush Silhouette 1 NO ●
2NO
2 YW4S-3E20 YW4S-31E20 YW4S-32E20 YW4S-33E20
ø16 (20)
3 NO ●
1
ø22 2NO
2 NO ● ● YW4S-3E20N1 YW4S-31E20N1 YW4S-32E20N1 YW4S-33E20N1
(20N1)
3 NO ●
ø30
1 NC
2NC
2 YW4S-3E02 YW4S-31E02 YW4S-32E02 YW4S-33E02
Miniature (02)
3 NC
Pilot Lights 1
2NC
2 NC ● YW4S-3E02N1 YW4S-31E02N1 YW4S-32E02N1 YW4S-33E02N1
(02N1)
3 NC
1 NO ●
1NO-1NC
2 YW4S-3E11 YW4S-31E11 YW4S-32E11 YW4S-33E11
(11)
HW
3 NC
1 NC
1NO-1NC
TW 45° 2 YW4S-3E11N1 YW4S-31E11N1 YW4S-32E11N1 YW4S-33E11N1
(11N1)
3-Position 3 NO ●
YW 1 NO ●
C 1NO-1NC
L R 2 NC ● YW4S-3E11N2 YW4S-31E11N2 YW4S-32E11N2 YW4S-33E11N2
(11N2)
3
1
1NO-1NC
2 NC ● YW4S-3E11N3 YW4S-31E11N3 YW4S-32E11N3 YW4S-33E11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW4S-3E11N4 YW4S-31E11N4 YW4S-32E11N4 YW4S-33E11N4
(11N4)
3 NC
1 NO ●
3NO
2 NO ● ● YW4S-3E30 YW4S-31E30 YW4S-32E30 YW4S-33E30
(30)
3 NO ●
1 NC
3NC
2 NC ● YW4S-3E03 YW4S-31E03 YW4S-32E03 YW4S-33E03
(03)
3 NC
1 NO ●
2NO-1NC
2 NC ● YW4S-3E21 YW4S-31E21 YW4S-32E21 YW4S-33E21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW4S-3E12 YW4S-31E12 YW4S-32E12 YW4S-33E12
(12)
3 NC
B-285
ø22 YW Series Switches & Pilot Lights
Selector Switch with Plastic Bezel Selector Switch with Metal Bezel
Panel Thickness: 0.8 to 6 Panel Thickness: 0.8 to 6
Gasket Gasket
10
10
APEM
10
10
0.3 Switches &
M3.5 Terminal Screw 0.5 M3.5 Terminal Screw 90° Pilot Lights
Contact Block 90° Contact Block Lock
Control Boxes
Locking Ring
Locking Ring Emergency
28.6
Stop Switches
Enabling
41.4
Switches
.5
ø29 Safety Products
11.3
11 45.8 24 30 Explosion Proof
45.8 24 2-Position 2-Position Terminal Blocks
45°
45° 45° 45° Relays & Sockets
Lock
Lock
Circuit
Protectors
28.6
28.6
Power Supplies
41.4
41.4
LED Illumination
ø29 .5
ø2 ø29 Controllers
Kn 7.6
30 Dia ob 30 Operator
me
ter Interfaces
3-Position 3-Position
Sensors
AUTO-ID
2 3 1 2 3 ø22
1
ø30
Miniature
Pilot Lights
HW
TW
YW
C C
L R L R
B-286
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Switches &
Pilot Lights
1 NO ●
Control Boxes 1NO
2 YW1K-2AE10 YW4K-2AE10
(10)
Emergency 3
Stop Switches
1
Enabling 1NC
Switches 2 YW1K-2AE01 YW4K-2AE01
(01)
3 NC ●
Safety Products
1 NO ●
2NO
Explosion Proof 2 YW1K-2AE20 YW4K-2AE20
(20)
3 NO ●
Terminal Blocks
1 NC ●
2NC
Relays & Sockets 2 YW1K-2AE02 YW4K-2AE02
(02)
90° 2-position 3 NC ●
Circuit Maintained
Protectors 1 NO ●
1NO-1NC
L R 2 YW1K-2AE11 YW4K-2AE11
Power Supplies (11)
3 NC ●
LED Illumination 1 NO ●
3NO
2 NO ● YW1K-2AE30 YW4K-2AE30
Controllers (30)
3 NO ●
Operator 1 NC ●
Interfaces 3NC
2 NC ● YW1K-2AE03 YW4K-2AE03
(03)
Sensors 3 NC ●
1 NO ●
AUTO-ID 2NO-1NC
2 NC ● YW1K-2AE21 YW4K-2AE21
(21)
3 NO ●
1 NO ●
1NO-2NC
2 NC ● YW1K-2AE12 YW4K-2AE12
Flush Silhouette (12)
3 NC ●
ø16 1 NO ●
1NO
2 YW1K-21BE10 YW4K-21BE10
(10)
ø22 3
1
ø30 1NC
2 YW1K-21BE01 YW4K-21BE01
(01)
Miniature 3 NC ●
1 NO ●
Pilot Lights 2NO
2 YW1K-21BE20 YW4K-21BE20
(20)
3 NO ●
1 NC ●
2NC
2 YW1K-21BE02 YW4K-21BE02
(02)
HW 90° 2-position 3 NC ●
Spring Return from Right 1 NO ●
TW 1NO-1NC
L R 2 YW1K-21BE11 YW4K-21BE11
(11)
YW 3 NC ●
1 NO ●
3NO
2 NO ● YW1K-21BE30 YW4K-21BE30
(30)
3 NO ●
1 NC ●
3NC
2 NC ● YW1K-21BE03 YW4K-21BE03
(03)
3 NC ●
1 NO ●
2NO-1NC
2 NC ● YW1K-21BE21 YW4K-21BE21
(21)
3 NO ●
1 NO ●
1NO-2NC
2 NC ● YW1K-21BE12 YW4K-21BE12
(12)
3 NC ●
• On the spring-returned types, the key can be removed only from the maintained position. On the maintained types, the key can be removed from every position.
Key retained positions are also available. See Part No. Development shown on B-288.
• Each key selector switch is supplied with two identical keys.
B-287
ø22 YW Series Switches & Pilot Lights
Switches &
Pilot Lights
1 NO ●
2NO Control Boxes
2 YW1K-3AE20 YW4K-3AE20
(20)
3 NO ● Emergency
Stop Switches
1
2NO Enabling
2 NO ● ● YW1K-3AE20N1 YW4K-3AE20N1 Switches
(20N1)
3 NO ●
Safety Products
1 NC
2NC
2 YW1K-3AE02 YW4K-3AE02 Explosion Proof
(02)
3 NC
Terminal Blocks
1
2NC
2 NC ● YW1K-3AE02N1 YW4K-3AE02N1 Relays & Sockets
(02N1)
3 NC
Circuit
1 NO ● Protectors
1NO-1NC
2 YW1K-3AE11 YW4K-3AE11
(11) Power Supplies
3 NC
1 NC LED Illumination
1NO-1NC
2 YW1K-3AE11N1 YW4K-3AE11N1
45° 3-position (11N1) Controllers
3 NO ●
Maintained
1 NO ● Operator
C 1NO-1NC Interfaces
L R 2 NC ● YW1K-3AE11N2 YW4K-3AE11N2
(11N2)
3 Sensors
1
1NO-1NC AUTO-ID
2 NC ● YW1K-3AE11N3 YW4K-3AE11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW1K-3AE11N4 YW4K-3AE11N4
(11N4) Flush Silhouette
3 NC
1 NO ● ø16
3NO
2 NO ● ● YW1K-3AE30 YW4K-3AE30
(30)
3 NO ● ø22
1 NC
3NC ø30
2 NC ● YW1K-3AE03 YW4K-3AE03
(03)
3 NC Miniature
1 NO ●
2NO-1NC Pilot Lights
2 NC ● YW1K-3AE21 YW4K-3AE21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW1K-3AE12 YW4K-3AE12
(12)
3 NC HW
• On the maintained types, the key can be removed from every position. Key retained positions are also available. See Part No. Development below. TW
• Each key selector switch is supplied with two identical keys.
YW
B-288
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Switches &
Pilot Lights
1 NO ●
Control Boxes 2NO
2 YW1K-31BE20 YW4K-31BE20
(20)
Emergency 3 NO ●
Stop Switches
1
Enabling 2NO
Switches 2 NO ● ● YW1K-31BE20N1 YW4K-31BE20N1
(20N1)
3 NO ●
Safety Products
1 NC
2NC
Explosion Proof 2 YW1K-31BE02 YW4K-31BE02
(02)
3 NC
Terminal Blocks
1
2NC
Relays & Sockets 2 NC ● YW1K-31BE02N1 YW4K-31BE02N1
(02N1)
3 NC
Circuit
Protectors 1 NO ●
1NO-1NC
2 YW1K-31BE11 YW4K-31BE11
Power Supplies (11)
3 NC
LED Illumination 1 NC
1NO-1NC
2 YW1K-31BE11N1 YW4K-31BE11N1
Controllers 45° 3-position (11N1)
3 NO ●
Spring Return from Right
Operator 1 NO ●
Interfaces C 1NO-1NC
L R 2 NC ● YW1K-31BE11N2 YW4K-31BE11N2
(11N2)
Sensors 3
1
AUTO-ID 1NO-1NC
2 NC ● YW1K-31BE11N3 YW4K-31BE11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW1K-31BE11N4 YW4K-31BE11N4
Flush Silhouette (11N4)
3 NC
ø16 1 NO ●
3NO
2 NO ● ● YW1K-31BE30 YW4K-31BE30
(30)
ø22 3 NO ●
1 NC
ø30 3NC
2 NC ● YW1K-31BE03 YW4K-31BE03
(03)
Miniature 3 NC
1 NO ●
Pilot Lights 2NO-1NC
2 NC ● YW1K-31BE21 YW4K-31BE21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW1K-31BE12 YW4K-31BE12
(12)
HW 3 NC
TW • On the spring-returned types, the key can be removed only from the maintained position.
Key retained positions are also available. See Part No. Development shown on B-288.
YW • Each key selector switch is supplied with two identical keys.
B-289
ø22 YW Series Switches & Pilot Lights
Switches &
Pilot Lights
1 NO ●
2NO Control Boxes
2 YW1K-32CE20 YW4K-32CE20
(20)
3 NO ● Emergency
Stop Switches
1
2NO Enabling
2 NO ● ● YW1K-32CE20N1 YW4K-32CE20N1 Switches
(20N1)
3 NO ●
Safety Products
1 NC
2NC
2 YW1K-32CE02 YW4K-32CE02 Explosion Proof
(02)
3 NC
Terminal Blocks
1
2NC
2 NC ● YW1K-32CE02N1 YW4K-32CE02N1 Relays & Sockets
(02N1)
3 NC
Circuit
1 NO ● Protectors
1NO-1NC
2 YW1K-32CE11 YW4K-32CE11
(11) Power Supplies
3 NC
1 NC LED Illumination
1NO-1NC
2 YW1K-32CE11N1 YW4K-32CE11N1
45° 3-position (11N1) Controllers
3 NO ●
Spring Return from Left
1 NO ● Operator
C 1NO-1NC Interfaces
L R 2 NC ● YW1K-32CE11N2 YW4K-32CE11N2
(11N2)
3 Sensors
1
1NO-1NC AUTO-ID
2 NC ● YW1K-32CE11N3 YW4K-32CE11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW1K-32CE11N4 YW4K-32CE11N4
(11N4) Flush Silhouette
3 NC
1 NO ● ø16
3NO
2 NO ● ● YW1K-32CE30 YW4K-32CE30
(30)
3 NO ● ø22
1 NC
3NC ø30
2 NC ● YW1K-32CE03 YW4K-32CE03
(03)
3 NC Miniature
1 NO ●
2NO-1NC Pilot Lights
2 NC ● YW1K-32CE21 YW4K-32CE21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW1K-32CE12 YW4K-32CE12
(12)
3 NC HW
• On the spring-returned types, the key can be removed only from the maintained position. TW
Key retained positions are also available. See Part No. Development shown on B-288.
• Each key selector switch is supplied with two identical keys. YW
B-290
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Switches &
Pilot Lights
1 NO ●
Control Boxes 2NO
2 YW1K-33DE20 YW4K-33DE20
(20)
Emergency 3 NO ●
Stop Switches
1
Enabling 2NO
Switches 2 NO ● ● YW1K-33DE20N1 YW4K-33DE20N1
(20N1)
3 NO ●
Safety Products
1 NC
2NC
Explosion Proof 2 YW1K-33DE02 YW4K-33DE02
(02)
3 NC
Terminal Blocks
1
2NC
Relays & Sockets 2 NC ● YW1K-33DE02N1 YW4K-33DE02N1
(02N1)
3 NC
Circuit
Protectors 1 NO ●
1NO-1NC
2 YW1K-33DE11 YW4K-33DE11
Power Supplies (11)
3 NC
LED Illumination 1 NC
1NO-1NC
2 YW1K-33DE11N1 YW4K-33DE11N1
Controllers 45° 3-position (11N1)
3 NO ●
Spring Return Two-way
Operator 1 NO ●
Interfaces C 1NO-1NC
L R 2 NC ● YW1K-33DE11N2 YW4K-33DE11N2
(11N2)
Sensors 3
1
AUTO-ID 1NO-1NC
2 NC ● YW1K-33DE11N3 YW4K-33DE11N3
(11N3)
3 NO ●
1
1NO-1NC
2 NO ● ● YW1K-33DE11N4 YW4K-33DE11N4
Flush Silhouette (11N4)
3 NC
ø16 1 NO ●
3NO
2 NO ● ● YW1K-33DE30 YW4K-33DE30
(30)
ø22 3 NO ●
1 NC
ø30 3NC
2 NC ● YW1K-33DE03 YW4K-33DE03
(03)
Miniature 3 NC
1 NO ●
Pilot Lights 2NO-1NC
2 NC ● YW1K-33DE21 YW4K-33DE21
(21)
3 NO ●
1 NC
1NO-2NC
2 NO ● ● YW1K-33DE12 YW4K-33DE12
(12)
HW 3 NC
TW • On the spring-returned types, the key can be removed only from the maintained position.
Key retained positions are also available. See Part No. Development shown on B-288.
YW • Each key selector switch is supplied with two identical keys.
B-291
ø22 YW Series Switches & Pilot Lights
APEM
Emergency
Locking Ring Locking Ring Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
11 11.3
2-position Terminal Blocks
45.8 38 45.8 38 2-position
Relays & Sockets
Circuit
45°
45° 45°
45° Protectors
Lock Lock
Power Supplies
28.6
28.6
LED Illumination
Controllers
41.4
41.4
.5
ø29
.0 ø29 Operator
Interfaces
30.0 Sensors
30.0
3-position 3-position
AUTO-ID
2 3 1 2 3 ø30
1
Miniature
Pilot Lights
HW
TW
YW
C C
L R L R
B-292
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Accessories
Package
Name & Shape Part No. Description & Dimensions (mm)
Quantity
Locking Ring Wrench Metallic tool used to tighten the plastic locking ring
when installing the YW series in a panel.
110 8
MW9Z-T1 ø2 1
APEM
Switches &
Pilot Lights
Lamp Holder Tool Made of rubber. Used for replacing lamps.
Control Boxes
ø14
Emergency OR-55 1
Stop Switches
Enabling 59
ø11.6
Switches
Safety Products
Rubber Mounting Hole Plug Used for plugging unused mounting holes in the panel. ø29
Explosion Proof
Color: Black
OB-31PN05 5
3.5
Terminal Blocks ø25
3.5
Relays & Sockets
Metallic Mounting Hole Plug Used for plugging unused mounting holes in the panel.
Circuit Weight: Approx. 18g ø25.8
Protectors
3
LW9Z-BM 1
Power Supplies
12
Locking Ring
LED Illumination
93
ø16
HW9Z-KL1 1
ø22
30
70
ø30 24
0
ø5
ø2
2.2
HW
TW
YW
B-293
ø22 YW Series Switches & Pilot Lights
5
Switches &
Pilot Lights
22.3
10
Control Boxes
M3.5 41.4
Terminal Screw Emergency
YW-E01 Contact: 1NC Color: reddish purple Stop Switches
Enabling
Switches
Safety Products
Double Contact Block
Explosion Proof
Terminal Blocks
YW-EW20 Contact: 2NO Color: blue
Relays & Sockets
Circuit
Protectors
5
Power Supplies
LED Illumination
42.3
Controllers
YW-EW02 Contact: 2NC Color: reddish purple 10
M3.5 Operator
Terminal Screw 41.4 Interfaces
Sensors
Note: D
ouble contact blocks cannot be used on AUTO-ID
emergency stop switches.
Color: blue
and reddish
YW-EW11 Contact: 1NO-1NC
purple
Flush Silhouette
ø16
LED Lamp Specify a color code in place of ➁ in the Part No.: ø22
LSED-6➁N 6V AC/DC
A (amber), G (green), PW (pure white), R (red), S (blue), Y (yellow)
See B-271 for applicable units and rated current. ø30
LSED-1➁N 12V AC/DC Note: Yellow LED lamps are used for white illumination of pilot lights and
illuminated pushbuttons. Miniature
5.4 14.6 HW
LSED-M3➁N 230/240V AC/DC
TW
Incandescent Lamp One pack contains 100 incandescent lamps.
LS-T6P 6.3V, 1W
YW
Base BA9S/13
LS-T3P 30V, 1W 23 ±1
Spare Key
YW9Z-SK00PN02 2
BA9S/14
10.1
5.4 14.6
B-294
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Maintenance Parts
Buttons, Lenses, and Marking Plates
➀➁ Package
Name Style Part No. Dimensions (mm)
Color Code Quantity
Button 3.6
ø2
(for pushbuttons)
APEM Extended YW9Z-B12➀PN10
Switches & B: black 9.3
Pilot Lights G: green
R: red 0
Control Boxes ø4 10
S: blue
Emergency W: white
ø23.6
Stop Switches
Mushroom ø40mm YW9Z-B14➀PN10 Y: yellow
Enabling
Switches
6
Safety Products 10.8
Sensors 9.8
ø2
ø22 14.5
HW Y: yellow
Mushroom ø40mm YW9Z-L14➁PN10
TW
6
10.8
YW
Marking Plate
2.7
ø21.8
— YW9Z-PP12PN10 — 10
21 2
4.4
Marking Plate
2
7.
— YW9Z-P12PN10 — 10
ø16
15.2 1.4
5
B-295
ø22 YW Series Switches & Pilot Lights
29 Marking Plate
1 27 2.7
HWAM
APEM
12.1
Order marking plate Plastic (black)
HWAM HWAM
30
Switches &
separately. 1.5 mm thick R14.9
14.5 14.9
Pilot Lights
12.1
Order marking plate Plastic (black)
HWAQ HWAQ
30
separately. 1.5 mm thick R14.9 Explosion Proof
14.5 14.9
HWAQPN10 10 ø22 Terminal Blocks
1.9 1
Relays & Sockets
45
Circuit
1.6 0.9
Protectors
HWAS-0 1
Power Supplies
Plastic (black)
HWAQ Blank HWAS-0
1.5 mm thick LED Illumination
10 ø22
HWAS-0PN10 Controllers
Operator
Interfaces
R G E NC Y
EME Sensors
ø60
Blank HWAV-0 HWAV-0 1
AUTO-ID
Plastic (yellow)
HWAV ø22
1.5 mm thick
STOP
1.6 0.9
EMERGENCY STOP HWAV-27 HWAV-27 1 Flush Silhouette
• Legend “Emergency Stop”
is indicated outside a ø44mm circle. ø16
ø22
TW
Legends
• Installing the marking plate YW
Code Legend • To remove the marking plate, insert the flat screwdriver beween
on a nameplate the marking plate and nameplate.
0 (blank)
1 ON
Nameplate
2 OFF ➁ Flat Screwdriver
Marking Plate
B-296
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Switch Guards
Package Quantity: 1
Part No. & Shape (mm) Dimensions Part No. & Shape Dimensions (mm)
HW9Z-KG1 HW9Z-KG4
38 35 (0.4)
64 50
ø2
22
2
47
ø2
2
APEM
ø90
Switches &
76
67
ø66.8
ø80
32
Pilot Lights ø41
Gasket
EMO Switch Guard EMO Switch Guard
Control Boxes SEMI S2 compliant (Note 1) SEMI S2 compliant (Note 1)
Emergency SEMATECH compliant (Note 3) (2.2)
Stop Switches ISO 13850 compliant
Enabling
Switches HW9Z-KG2 HW9Z-KG5 75 36.2 (0.2)
36.5 63 0
Safety Products ø9
ø2
2.2
Explosion Proof ø2
2
ø76.1
Terminal Blocks
ø76
ø90
EMO Switch Guard
Relays & Sockets EMO Switch Guard Gasket
SEMI S2 compliant (Note 1)
SEMI S2 compliant (Note 2)
Circuit SEMATECH compliant (Note 3)
SEMATECH compliant (Note 3) (2.0)
Protectors
ISO 13850 compliant
Power Supplies
HW9Z-KG3 Material: Polyamide (PA6)
42 35 (0.4)
LED Illumination Color: Yellow, Munsell 2.5Y 8/10 equivalent
ø2
2 Degree of protection: IP65
Controllers
• Degree of protection IP65 applies to the combination of an emergency stop
Operator switch and an EMO switch guard.
ø64
ø74
52
Interfaces
ø37 Note 1: SEMI S2-0703 12.5.1 compliant.
EMO Switch Guard Gasket
Sensors
Note 2: The combination of IDEC’s emergency stop switches and EMO switch
SEMI S2 compliant (Note 1) (2.2) guards are approved by TÜV Rheinland for compliance with SEMI S2
AUTO-ID ISO 13850 compliant
standard.
Note 3: SEMATECH Application Guide for SEMI S2-93, 12.4.c. compliant.
Transformer
Flush Silhouette
ø16
Din Rail Mount Transformer For 6V
Dimensions (mm)
ø22
Secondary Terminal Primary Terminal
ø30 Screws M3.5 Screws M3.5
Miniature
Pilot Lights
22
30
230V AC TWR5236
240V AC TWR5246
380V AC TWR5386
440V AC TWR546
480V AC TWR5486 Note: Finger-safe terminal cover is supplied with the transformer.
B-297
ø22 YW Series Switches & Pilot Lights
Panel Mounting 2. To reinstall, place the TOP markings on the operator and the latch on the full Control Boxes
voltage unit in the same direction, and insert the operator into the full voltage Emergency
• Remove the contact block from the operator (for pilot lights, remove the
unit. Stop Switches
transformer or full voltage unit from the pilot light). Remove the locking ring
from the operator. Insert the operator into the panel cut-out from the front, Enabling
Notes for Panel Mounting Switches
tighten the locking ring from the back, then install the contact block to the
1. Use the optional locking ring wrench (MW9Z-T1) to mount the operator onto Safety Products
operator. a panel. Tightening torque must not exceed 2.0 N·m. Do not use pliers.
Removing and Installing the Contact Block Excessive tightening will damage the locking ring. Explosion Proof
2. For contact blocks and transformers housing LED and incandescent lamps,
make sure not to press the lamps too hard, otherwise the lamp socket may Terminal Blocks
be damaged.
Relays & Sockets
Insertion Order of Lens and Marking Plate Circuit
Illuminated Pushbutton Pilot Light Protectors
ø16
ø22
Marking Plate
Lens ø30
Marking Miniature
Removing and Installing the Transformer For YW series pilot lights and illuminated pushbuttons, legends and symbols can
1. Insert a flat screwdriver (5 mm wide at maximum) into the latch hole on the Pilot Lights
be engraved on built-in marking plates, or printed mylar film can be inserted
transformer unit as shown in the photo below, and disengage the latch. Then under the lens for labeling purposes. Mylar film is not supplied with the YW
pull out the operator. series and must be supplied by the end user.
2. To reinstall, place the TOP marking on the operator and the latch in the same
Built-in Marking Plate and Marking Film Size
direction, and push the operator into the transformer.
HW
Unit Pilot Light Illuminated Pushbutton
➀ TW
1.0
ø2 5.2
ø1
YW
Built-in Marking Plate
➁
1.2
1.0
0
0
ø17.2
ø22.7
➀
0
20.8
0
-0.2
15.0 -0.2
1. To remove the full voltage unit, squeeze the full voltage unit from both sides
to disengage the latch as shown, and pull it out. Like the transformer unit, 0.1-mm-thick × 2 sheets or 0.2-mm-thick × 1 sheet
the full voltage unit can also be pulled out by inserting a flat screwdriver into Film material: Mylar (recommended)
the latch hole as shown. Note: Marking film is not supplied with the pilot light or illuminated pushbutton.
B-298
Switches & Pilot Lights
ø22 YW Series Switches & Pilot Lights
Instructions
Replacement (LED and incandescent lamps) Mounting Panel Thickness
Lamps can be replaced using the lamp holder tool (OR-55) from the front of the The mounting panel must be 0.8 to 6.0 mm in thickness. When optional
panel, or by removing the contact block from the operator unit. accessories are added, the applicable panel thickness changes as shown below.
Padlock Cover
Removing the Lamp from the Front of the Panel HW9Z-KL1P
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling Panel Thickness Panel Thickness
Switches To remove, gently insert the lamp holder tool onto the lamp head. Then push 0.8 to 6 mm 0.8 to 3.2 mm
slightly, and turn the lamp holder tool to the left.
Safety Products
Wiring
Explosion Proof
Installing the Lamp from the Front of the Panel Applicable Wires
1. To install, insert the lamp head into the lamp holder tool, and hold the lamp
Stranded wire: 2.0 mm2 maximum (14AWG)
Terminal Blocks as shown in the figure below. Solid wire: ø1.6 mm maximum (16AWG)
Relays & Sockets Lamp Lamp Removal Tool One or two wires can be connected to the terminal.
Circuit
Protectors Applicable Crimping Terminals
Power Supplies [Spade terminal]
When using crimping terminals, be sure to use insulating tubes or use insulated
LED Illumination
2. Place the pins on the lamp base to the grooves in the lamp socket. Insert the crimping terminals.
lamp and turn it to the right.
Note: Ring terminals cannot be used.
Controllers
11.5 max. Crimping Terminal Insulation Tube
Operator
6.9 max.
3.6 min.
Sensors
Insert a flat screwdriver between the latch and contact block mounting adapter, Insulation
ø16
and disengage the latch.
ø22
Make sure to remove the lamp and contact blocks before removing the full
voltage adapter. 8.0 max. 8.0 max.
ø30
Lamp
Miniature When using spade terminals or ferrules, insert them to the bottom.
Pilot Lights
1
[Solid Wire]
Full Voltage Adapter When connecting two wires directly, use wires of the same size.
ø1.6 max.
Contact Block
HW
3
TW
8.0 max.
YW
2 2
B-299
ø22 YW Series Switches & Pilot Lights
When using the unibody pilot light in an environment where it is When anti-rotation is not required, remove the
subjected to noise, connect a noise suppressor across terminals X1 projection from the nameplate using pliers.
and X2 as shown below.
Noise Suppressor
Nameplate
X2 APEM
Handling
Switches &
X1 Do not expose the switch to excessive shock and Pilot Lights
vibration, otherwise the switch may be deformed
or damaged, causing malfunction or operation Control Boxes
LED lamps consist of semiconductors. If the applied voltage exceeds Terminal Blocks
the rated voltage, LED elements deteriorate due to overheat, resulting LED with
transformer Relays & Sockets
in significant decrease in brightness, hue change, or failure of lighting.
Also, if extraneous noise, transient voltage, or transient current is C C Circuit
applied to the circuit, similar effects will be caused. When using LED LED with Relay Ry Protectors
LED
transformer LED R coil or R
lamps, observe the following instructions. solenoid Power Supplies
2. Rechargeable battery
Note that the battery voltage may exceed the rated voltage of the Countermeasures against Dim Lighting
Flush Silhouette
LED lamp while the battery is being charged and immediately after 1. Leakage current through transistors or a contact protection circuit
the charging is complete. Be sure to use the LED lamp on a voltage may cause the LED lamp to illuminate dimly even when the output ø16
of ±10% the rated voltage, except the 230/240V AC/DC types on is off.
ø22
250V AC/DC maximum. 2. When the LED lamp is illuminated by a transistor output, take the
3. Full-wave rectification following measure. ø30
Since the LED lamp is AC/DC compatible, a diode bridge for
rectification is not necessary. If the LED lamp is used on a full-wave Miniature
[Circuit Example]
rectification current through a diode bridge, the rectifier diodes will Connect shunt resistor R in parallel with the LED lamp. Pilot Lights
reduce the voltage, resulting in lower brightness.
4. Single-phase half-wave rectification
This is not suitable for the power source of LED lamps. Use
constant- voltage DC power. R LED
HW
Noise
Io TW
LED elements deteriorate due to extraneous noise, resulting in
significant decrease in brightness, hue change, or failure of lighting. Io: Leakage current when the output is off
YW
R: Shunt resistor
When such effects are anticipated, take a protection measure shown
below, such as RC elements or a surge absorber.
Ordering Information
• When ordering, specify the Part No. and quantity.
• Replacement contact blocks are supplied in a package containing 10
pieces.
B-300
Ordering Terms and Conditions
Thank you for using IDEC Products.
By purchasing products listed in our catalogs, datasheets, and the like (hereinafter referred to as “Catalogs”) you agree to be bound by these terms and conditions. Please read
and agree to the terms and conditions before placing your order.
Specifications and other descriptions in this brochure are subject to change without notice.