Professional Documents
Culture Documents
255-400-419R15.1
ISSUE 8
MAY 2011
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2011 Alcatel-Lucent. All rights reserved.
Notice
Every effort was made to ensure that this information product was complete and accurate at the time of printing. However, information is subject to change.
Security Statement
In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features. In such an event,
applicable tariffs require that the customer pay all network charges for traffic. Alcatel-Lucent and its predecessors cannot be responsible for such charges and
will not make any allowance or give any credit for charges that result from unauthorized access.
Limited Warranty
For terms and conditions of sale, contact your Alcatel-Lucent Account Team.
Ordering Information
For more ordering information, refer to "How to order" in the section titled "About this information product."
Developed by Alcatel-Lucent.
About this document
About this document
Purpose
The 1310 OMC-P Web API User Guide describes how to use the 1310 OMC-P Web API.
For a list of supported products and releases, refer to the 1310 OMC-P Software Release
Notes, 255-400-402Rx.x.x.x, where x.x.x.x is your release number..
Chapter Description
Appendix D Update table 67 “SetTZPath” for OMC-7748.
Issue 7
Chapter Description
Appendix D. Update ngfs-subscriber-v2 for OMC-4237/82197. Also for
OMC-6681/IMR 914282 and OMC-6550.
Appendix F. Change to pcm-entuser for OMC-6832.
1=allow user to edit common features.
0=do not allow user to edit common features
Issue 6
Chapter Description
Appendix D For every subscriber feature, add description to indicate this
feature is per PUID or per Party.
...................................................................................................................................................................................................................................
1310 OMC-P Release 15.1 xi
255-400-419R15.1 Issue 8
May 2011
About this document
....................................................................................................................................................................................................................................
Table 3 Reason for reissue (continued)
Chapter Description
3 Subparty, Category – Add “the category is the feature bundle
and not a calling party category.” MultilineHuntGroup,
PublicUID - Add “the PUID in the HSS must be of the format
mlhg_Group_Member, where the Member must be a 4 digit
number (e.g. Member 1 is 0001)” CallPickupOrig,
CallPickupDial– Add “allows subscriber to pick up a ringing call
in the Call Pickup Group” CallPickupOrig, DirCallPickupDial –
Add “allows subscriber to pick up a ringing call to a DN. This
DN must be in xxx group. For this field to be enabled the
Directed group must be provisioned for the subscriber.”
Issue 5
Chapter Description
5, 6 Password change to Portal login password for LCM and PCM.
Document states issue 4 but is issue 5.
Issue 4
Chapter Description
1 Updated to add support for sub-pbx and stg-mappcoffld for
15.1.1.
Issue 3
Chapter Description
7 Added change permissions to demo section.
Issue 2
Chapter Description
All Final version of the 15.1 WebAPI spec is included.
....................................................................................................................................................................................................................................
xii 1310 OMC-P Release 15.1
255-400-419R15.1 Issue 8
May 2011
About this document
....................................................................................................................................................................................................................................
Issue 1
Chapter Description
All A draft version of the 15.1 WebAPI spec is included.
Intended Audience
The intended audience of this document includes:
• Network planners
• System Administrators
Supported Systems
The 1310 OMC-P Web API complements management through the 1310 OMC-P
Graphical User Interface (GUI). The systems supported by the Web API includes:
• Alcatel-Lucent Gateway Platform (ALGP)
• 5420 Converged Telephony Server (CTS)
• Alcatel-Lucent Communication Manager (A-LCM)
• 5420 Personal Communication Manager (PCM)
• 5450 IP Session Controller (ISC)
• 5060 IP Call Server (ICS)
• 5060 MGC-8
Conventions Used
The table below lists and illustrates text style conventions used in this document.
....................................................................................................................................................................................................................................
1310 OMC-P Release 15.1 xiii
255-400-419R15.1 Issue 8
May 2011
About this document
....................................................................................................................................................................................................................................
Related Information
Alcatel-Lucent also provides the following related documents. For which release numbers
apply to your release, consult your release of the 1310 OMC-P Software Release Notice
(255-400-402Rx.x.x.x).
....................................................................................................................................................................................................................................
xiv 1310 OMC-P Release 15.1
255-400-419R15.1 Issue 8
May 2011
About this document
....................................................................................................................................................................................................................................
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/enus/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
1310 OMC-P Release 15.1 xv
255-400-419R15.1 Issue 8
May 2011
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xvi 1310 OMC-P Release 15.1
255-400-419R15.1 Issue 8
May 2011
Table of Contents
1. Introduction ........................................................................................................................... 1
1.1 Changes ....................................................................................................................... 1
1.1.1 Lucent Gateway Platform (LGP) 6.2.1.2 to 6.2.1.3 .................................................... 3
1.1.2 Lucent Gateway Platform (LGP) 6.2.1.3 to 6.3.0.1 .................................................... 3
1.1.3 Lucent Gateway Platform (LGP) 6.3 to 6.4 .............................................................. 4
1.1.4 Lucent Gateway Platform (LGP) 7.0.1 .................................................................... 5
1.1.5 Lucent Gateway Platform (LGP) 7.1 ...................................................................... 5
1.1.6 LCM R6.2.1 to LCM R6.3.3 ................................................................................. 6
1.1.7 LCM R6.3.3 to LCM R6.3.4 ................................................................................. 6
1.1.8 LCM R6.3.4 to LCM R6.3.6 ................................................................................. 6
1.1.9 LCP-CTS R2.0 to LCP-CTS R4.0 .......................................................................... 6
1.1.10 LCP-CTS R4.0 to LCP-CTS R4.1 ........................................................................ 8
1.1.11 LCP-CTS R4.1 to LCP-CTS R5.0 ........................................................................ 9
1.1.12 LCP-CTS R5.0 to LCP-CTS R6.0 ...................................................................... 14
1.1.13 LCP-CTS R6.0 to LCP-CTS R6.1 ...................................................................... 17
1.1.14 LCP-CTS R6.1 to LCP-CTS R6.1.0.1 ................................................................. 19
1.1.15 LCP-CTS R6.1 to LCP-CTS R6.1.1 .................................................................... 19
1.1.16 LCP-CTS R6.1 to LCP-CTS R6.1a ..................................................................... 20
1.1.17 LCP-CTS R6.1a to LCP-CTS R6.2 ..................................................................... 20
1.1.18 LCP-CTS R6.2 to LCP-CTS R6.2.1 .................................................................... 22
1.1.19 LCP-CTS R6.2.1 to LCP-CTS R7.0 .................................................................... 23
1.1.20 LCP-CTS R7.0 to LCP-CTS R7.0.1 .................................................................... 26
1.1.21 LCP-CTS R7.0.1 to LCP-CTS R7.1 .................................................................... 26
1.1.22 LCP-CTS R7.1 to LCP-CTS R7.1.1 .................................................................... 28
1.1.23 LCP-CTS R7.1 to LCP-CTS R7.1.2 .................................................................... 30
1.1.24 PCM-Unknown version to PCM R7.0 ................................................................. 30
1.1.25 PCM R7.0 to PCM R7.1.1 ................................................................................ 31
1.1.26 LCP-ISC R18.0 ............................................................................................... 31
1.1.27 LCP-ISC R18.0 to LCP-ISC R18.1 ..................................................................... 31
1.1.28 LCP-ISC R18.1 to LCP-ISC R20.0 ..................................................................... 32
1.1.29 LCP-ISC R20.0 to LCP-ISC R20.0.1 .................................................................. 33
1.1.30 LCP-ISC R20.0.1 to LCP-ISC R20.1 .................................................................. 33
1.1.31 LCP-ISC R20.1 to LCP-ISC R20.1.1 .................................................................. 36
1.1.32 LCP-SCG 7.0 ................................................................................................. 37
1.1.33 LCP-SCG 7.0 to LCP-SCG 7.1 .......................................................................... 37
1.1.34 LGP R7.1 to LGP R8.0 .................................................................................... 39
1.1.35 LGP R7.1 to LGP R8.0.1 .................................................................................. 39
1.1.36 LGP R7.1 to LGP R8.0.2 .................................................................................. 39
1.1.37 LGP R8.0.2 to LGP R8.1.0 ............................................................................... 39
1.1.38 LGP R8.0.2 to LGP R8.0.4 ............................................................................... 39
1.1.39 A7510_R31 .................................................................................................... 40
1.1.40 A7510_R31 to A7510_R322_B01 ...................................................................... 40
1.1.41 A7510_R322_B01 to 7510.R331.S0.01 ................................................................ 41
1.1.42 7510.R331.S0.01 to 7510.R331.S1.01 .................................................................. 41
2. Overview ............................................................................................................................. 43
2.1 Web API .................................................................................................................. 43
2.1.1 XML ............................................................................................................. 43
2.1.2 SOAP ............................................................................................................ 44
2.2 User Authentication ..................................................................................................... 44
2.2.1 Activate User ................................................................................................... 44
2.2.2 Cancel User ..................................................................................................... 45
• Plexus(MGC-8) releases R5.1.0.3, R5.1.2.3, R5.3.0.6, R6.2.0.1, R6.2.0.2, R6.3, R7.0, R7.0.1, R7.1, R8.0,
R8.0.2, R8.0.1, R8.0.4, R8.1.0
• FS5000 releases R4.1, R5.0, R6.0, R6.1, R6.1.1, R6.2, R6.2.1, R7.0, R7.0.1, R7.1, R7.1.1, R7.1.2
1.1 Changes
Changes from OMCP R10.1 to OMCP R10.2 include:
• LCP-LSM R6.1.2
• LCP-ISC R18.0
• LCP-SCG 7.0
• A7510_R31
• A7510_R31 to A7510_R322_B01
• A7510_R322_B01 to 7510.R331.S0.01
• 7510.R331.S0.01 to 7510.R331.S1.01
ISUPUK
ISUPRUS
IPTTHS
IPTUKS
IPTRU
SIPTTELSTRA
xxxx-ss7-trk
new cic values
ISUPES
ISUPTH
ISUPUK
ISUPRU
new parameter sst
xxxx-slhr-scp new parameter ssfGtFormatInd
new parameter ssfGtTransType
new parameter scpNai
new parameter ssfNai
new parameter scpNp
new parameter ssfNP
xxxx-prfl-sip new parameter useCallType
xxxx-prfl-sipt new parameter useCallType
xxxx-trans-plan
new parameter useExtCallType
xxxx-prfl-isupes new command
xxxx-lrn new command
xxxx-mgc-pc new command
xxxx-route-ss7 new command
xxxx-sg-pc new command
xxxx-list-trigesc new command
xxxx-audio-annc new command
xxxx-audio-msg new command
xxxx-annc-map new command
xxxx-call-captverbose new command
xxxx-sip-route new command
xxxx-sip-tgmapaddr new command
xxxx-prfl-protrel new command
Request Change
xxxx-sg-protn new command
xxxx-testport new command
xxxx-crs-t0 new command
Request Change
xxxx-TRKGRP New parameter SCRPRFLID
New parameter aoc
Request Change
ngfs-bgcfpaniaccessinfotbl-v2 new table
ngfs-bgcfpaniaccessinfo-v2 new table
Request Change
ngfs-localccfparameters-v2 new table
ngfs-ntmcontroltable-v2 new table
Request Change
ngfs-chargingprofilerec-v2 new table
ngfs-chargingprofiletbl-v2 new table
ngfs-crfactivaterec-v2 new table
ngfs-crfactivatetbl-v2 new table
ngfs-crfcalldestinationrec-v2 new table
ngfs-crfcalldestinationtbl-v2 new table
ngfs-crfcalltyperec-v2 new table
ngfs-crfcalltypetable-v2 new table
ngfs-crfcallerratecategrec-v2 new table
ngfs-crfcallerratecategtbl-v2 new table
ngfs-crfdayprogramtable-v2 new table
ngfs-crfraterecord-v2 new table
ngfs-crfratetable-v2 new table
ngfs-crftariffprofilerec-v2 new table
ngfs-crftariffprofiletable-v2 new table
ngfs-crftariffselectionrec-v2 new table
ngfs-crftariffselectiontbl-v2 new table
ngfs-agcfendpoint-v2 new parameter FlatTermID
ngfs-agcfgatewayrecord-v2 new parameter IsPrimary
new parameter MateExternalIPAddr
new parameter MateSite
parameter PhysicalTermIdScheme add new content
ngfs-agcfprofilerecord-v2 parameter EmergencyHostURI add new content
parameter RURIToEmergencyHost add new content
ngfs-authorizationcodes-v2 new parameter NonE164
ngfs-dgcforighostrecord-v2 new parameter Hosttype
new parameter SubnetMask
ngfs-digittable-v2 parameter Service add new content
ngfs-fs5000profile-v2 new parameter AcrChargingProfile
new parameter ChargingProfile
new parameter CsdDynamicSeizeControl
new parameter CsdDynmaicReassignment
new parameter CsdMinTimeSubAllocated
new parameter CsdProvisioning
new parameter CsdSubNotFoundHandling
new parameter MethodForASOrig
parameter PsiForOrigInvites add new content
new parameter SupportBigAdd
new parameter SupportHexDig
Request Change
ngfs-sipfilterbodytable-v2 new table
ngfs-sipfilterbodyrecord-v2 new table
ngfs-sipfilterreftable-v2 new table
ngfs-sipfilterrefrecord-v2 new table
ngfs-calllocktbl-v2 new table
ngfs-calllockrec-v2 new table
ngfspool-groupprofile new table
ngfspool new table
ngfs-vpnlcr-v2 new table
ngfs-sipaggtrusrulesettbl-v2 new table
ngfs-sipaggtrusrulesetrec-v2 new table
ngfs-sipagguntrusrulesettbl-v2 new table
ngfs-sipagguntrusrulesetrec-v2 new table
ngfs-aggsrcaddrpolicytbl-v2 new table
ngfs-aggsrcaddrpolicyrec-v2 new table
ngfs-vpnicr-v2 new table
ngfs-vpngroup-v2 new table
ngfs-vpngroupreverse-v2 new table
motive-subscriber new parameter PartyId
new parameter PrimaryPUID
ngfs-agcfgwvariantrecord-v2 new parameter AnalogLinePacakge
ngfs-agcfprofilerecord-v2 new parameter IoiParaEnabled
Request Change
ngfs-sdpprofiletable-v2 new table
ngfs-sdpprofilerecord-v2 new table
ngfs-dscpprofiletable-v2 new table
ngfs-dscpprofilerecord-v2 new table
ngfs-pdfprofiletable-v2 new table
ngfs-pdfprofilerecord-v2 new table
ngfs-sipstacktimertable-v2 new table
ngfs-sipstacktimerrecord-v2 new table
ngfs-nonanchoreddesttbl-v2 new table
ngfs-nonanchoreddestrec-v2 new table
ngfs-virtualgrouptable-v2 new table
ngfs-virtualgrouprecord-v2 new table
ngfs-servicelevelpolicytbl-v2 new table
ngfs-servicelevelpolicyrec-v2 new table
ngfs-mappingprofiletable-v2 new table
ngfs-mappingprofilerecord-v2 new table
ngfs-ipsecsatable-v2 new table
ngfs-ipsecsarecord-v2 new table
ngfs-extdomainroutetbl-v2 new table
ngfs-extdomainrouterec-v2 new table
ngfs-diamport-v2 new table
ngfs-diamappparameters-v2 new table
ngfs-agcfgatewayrecord-v2 new parameter ComfortNoise
new parameter Dtmf
new parameter FaxEvents
new parameter ModemEvents
new parameter TextTelephonyEvents
ngfs-bgcfpaniaccesstype-v2 new parameter NgfsBgcfPaniAccessTypeAid
ngfs-bgcfprofile-v2 new parameter IscChargingProfileId
ngfs-ibcfprofilerecord-v2 new parameter AcrChargingProfileId
new parameter SdpProfileId
1.1.39 A7510_R31
Request Change
mg7510h248profile new table
mg7510vmg new table
mg7510fan new table
mg7510voipdefaults new table
Request Change
ne7510 new table
mg7510temperaturemanage new table
mg7510card new table
mg7510sfwipconfig new table
mg7510fan new parameter MgwShelfGen2FanInfospeed
mg7510h248profile new parameter MgwH248ProfileMaxStrEndPoint
new parameter MgwH248ProfileRootMaxEphTPC
new parameter MgwH248ProfileRootV2MaxEph
new parameter MgwH248ProfileRootV2MaxNOC
new parameter MgwH248ProfileRootV2MaxPhy
new parameter MgwH248ProfileRootV2MaxPTC
new parameter MgwH248ProfileRootV2MGCOPL
new parameter MgwH248ProfileRootV2MGCPRTV
new parameter MgwH248ProfileRootV2MGOPL
new parameter MgwH248ProfileRootV2MGPRTV
new parameter MgwH248ProfileRootV2NorMGCET
new parameter MgwH248ProfileRootV2NorMGET
new parameter MgwH248ProfileRootV2State
Request Change
mg7510IPv6StaticRoute new table
mg7510ipbfd new table
mg7510h248profile new parameter MgwH248ProfileAdidTimeAppli
new parameter MgwH248ProfileAdidTimeAudio
new parameter MgwH248ProfileAdidTimeImage
new parameter MgwH248ProfileAdidTimeMessage
new parameter MgwH248ProfileAdidTimeOther
Figure 1. Overview
The API includes requests to the OMC-P to start/end a session, retrieve provisioned information, and make
provisioning changes that get sent through to the requested switch. The provisioning change-requests include
add, modify, and delete functions.
2.1.1 XML
XML is used as the structured language to represent the API. For example, the following shows the XML
representation of an example Lucent Gateway Platform switch "route" entity:
<route>
<RouteAid>circular_rt-1</RouteAid>
<Bgn>CASIF-100</Bgn>
<RtList>NONE</RtList>
<DgtModKey>dn1-CDPN</DgtModKey>
<Weight>10</Weight>
</route>
A request is encompassed utilizing the PlexViewRequest tag. For example, the following RTRV-ROUTE
command is shown:
</PlexViewRequest>
The response from the Web API is tagged with PlexViewResponse as show below. The RTRV-ROUTE
command returned a Status of "SUCCESS" and two routes.
<route>
<RouteAid>circular_rt-1</RouteAid>
<Bgn>CASIF-100</Bgn>
<RtList>NONE</RtList>
<DgtModKey>dn1-CDPN</DgtModKey>
<Weight>10</Weight>
</route>
<route>
<RouteAid>rl001-2</RouteAid>
<Bgn>ISDNIF-15001</Bgn>
<RtList>NONE</RtList>
<DgtModKey>NONE-NONE</DgtModKey>
<Weight>10</Weight>
</route>
</PlexViewResponse>
For brevity, the structure of the requests and responses are provided in table form in this document.
2.1.2 SOAP
SOAP is a communications protocol that allows applications to transport XML messages over HTTP (i.e.,
the Web). The Web API will be based upon synchronous SOAP request/response communication and both its
requests and responses will be encompassed in SOAP envelopes. For example, the following SOAP message
encapsulates an ENT-ROUTE command to be sent to the OMC-P system via the API:
For brevity, the SOAP envelope/body will be excluded in the following documentation.
<UserName>test</UserName>
<PassWord>testpassword</PassWord>
</PlexViewRequest>
The ACT-USER response returns SessionId, which identifies the current user session of the Web API. All
subsequent commands shall specify this SessionId.
For example, the following RTRV-ROUTE request specifies SessionId returned from the previous ACT-USER
command:
Before running the install Server.bin file, check if the Web Api is active, if already active, the WebApi must
be stopped:
/opt/PlexView/PlexWebApi/CurrRel/WebApi.sh stop
After the Server has been installed and activated, the WebApi must be activated:
/opt/PlexView/PlexWebApi/CurrRel/WebApi.sh start
2.4 Security
The following subsections describe the security features of the OMC-P Web API.
http://jakarta.apache.org/tomcat/.
Enabling SSL within Tomcat is a supported Web API feature. Instructions may be found in Appendix F.
2.4.7 Firewall
The Web API is intended for use behind a firewall in an OSS scenario.
The Web API responds to the retrieve request with data from its internal Oracle database. The OMC-P responds
to other enter, edit, and delete requests with a change to its internal Oracle database and will send the change
request to the appropriate switch.
The request type “xxxx” will be used to indicate that all four request types are available.
</PlexViewRequest>
The following Web API response returns three ROUTE-LIST entities, circular_rt, r1001, and
crt9999995c:
<route-list>
<RouteListAid>circular_rt</RouteListAid>
<Alloc>CIRCULAR</Alloc>
<OvrFlowTreat>NONE</OvrFlowTreat>
</route-list>
<route-list>
<RouteListAid>rl001</RouteListAid>
<Alloc>CIRCULAR</Alloc>
<OvrFlowTreat>NONE</OvrFlowTreat>
</route-list>
<route-list>
<RouteListAid>rt9999995</RouteListAid>
<Alloc>RANDOM</Alloc>
<OvrFlowTreat>NONE</OvrFlowTreat>
</route-list>
</PlexViewResponse>
The following specifies a request to retrieve ROUTE provisioned entities of a specific ROUTE-LIST. Note, the
optional AID specified within this command specifies requesting the children of ROUTE-LIST circular-rt:
<route>
<RouteAid>circular_rt-1</RouteAid>
<Bgn>CASIF-100</Bgn>
<RtList>NONE</RtList>
<DgtModKey>dn1-CDPN</DgtModKey>
<Weight>10</Weight>
</route>
</PlexViewResponse>
Filtering is employed as the mechanism to “get next 100” as well as perform ad-hoc queries. A <filter> element
is simply piggybacked on a RTRV request in order to specify the desired filter.
As an example, assume that one thousand ROUTE-LIST entities are provisioned, routeList1 through
routeList1000. The following RTRV request will return the first 100 entities, routeList1 through routeList100.
This is specified via the <filterType> element specifying First.
The following RTRV request will return the second 100 entities, routeList101 through routeList200. This is
specified via the <filterType> element specifying Next and the <lastAid> element specifying the last entity
returned in the previous request.
This can be repeated until no entries are returned, thus retrieving the entire one thousand ROUTE-LIST entities.
Ad-hoc queries may also be specified utilizing filters. For example, the following query specifies the retrieval
of the first 100 entries of ROUTE whose DgtModKey attribute begins with “dn”:
However, due to scalability reasons, MaxRows is limited to 4000 entities. If a user wishes to walk the entire
table, the Next filtering of the previous subsection should be used.
The following Web API request specifies MaxRows to 4000, will rtrv 4000 routes of route list foo.
<RouteAid>foo</RouteAid>
</PlexViewRequest>
2.6 ENT
The following specifies a Web API request to provision a ROUTE entity, circular_rt-2:
2.7 ED
The following specifies a Web API request to modify a ROUTE entity,circular_rt-2. The weight attribute
will be modified from 10 to 20.
2.8 DLT
The following specifies a Web API request delete a ROUTE-LIST entity, circular_rt-2:
The following Web API response specifies an unsuccessful provisioning operation, due to an attempted
provisioning of a route with a route AID that already exists:
The OMC-P software supports multiple versions of the switches that it manages. In addition, the OMC-P
WebAPI provides a limited backward compatibility function. This allows a customer OSS to use older version
API messages to talk to a newer version OMC-P, as well as, newer version switches (e.g. Plexus, CTS, etc.).
• 1. The OMC-P’s backword support only includes the Switch versions that it manages. The release notes
indicate which versions are supported.
• 2. The OMC-P always returns the latest fields on a retrieve. Even if the Switch is on an older release, the
OMC-P will return the fields that correspond to the latest Switch release that it supports. A Customer OSS,
in this scenario, must ignore the fields that it is not concerned with.
• 3. The OMC-P will ignore newer version fields when interfacing to an older version Switch. This applies to
newer version fields on existing or older version features. For the CTS, attempting to assign new features
will cause a failure.
• 4. The OMC-P will deprecate, but not remove, unused fields. Using deprecated fields in a message to a newer
Switch, will be ignored.
• 5. The OMC-P must be updated to a newer supporting release before any Switch is updated. If the OMC-P
needs to be at 11.0 to support CTS 4.1, the OMC-P must be updated to 11.0 before any CTS is updated to 4.1.
• 6. It is the responsibility of the Customer OSS to upgrade its software to take advantage of the new fields/
features of an upgraded OMC-P/Switches.
Physical
rtrv-eqpt
rtrv-info-eqpt
rtrv-t1
rtrv-t3
rtrv-sts1
rtrv-e1
rtrv-oc3
rtrv-oc12
rtrv-enet
rtrv-t0
ed-t0
SS7
xxxx-lnpscreen-digits
ISDN
xxxx-isdn-if
xxxx-isdn-lnk
xxxx-isdnsub-if
xxxx-isdn-bchan
CAS
xxxx-mg-prflcas
xxxx-cas-if
xxxx-cas-line
xxxx-cassub-if
Routing
xxxx-route-list
xxxx-route
xxxx-route-digits
xxxx-trans-plan
xxxx-trans-sched
rtrv-failcnd
xxxx-prfl-failcnd
xxxx-prfl-fraudtrap
xxxx-prfl-paramsuppress
xxxx-prfl-paramdefaults
xxxx-digitmod-dn
xxxx-digitmod-gen
xxxx-route-list
xxxx-digitmod-tns
xxxx-digitmod-param
xxxx-digit-screen
xxxx-subscriber-cl4
xxxx-treatment
xxxx-list-tollfree
xxxx-def-genie
IMT
xxxx-mgc-prflcas
xxxx-prfl-tgbilling
xxxx-prfl-sdp
xxxx-prfl-isupansi
xxxx-prfl-isupitu
xxxx-prfl-isupituq767
xxxx-prfl-isupmexico
xxxx-trkgrp
xxxx-prfl-origpbx
xxxx-prfl-termpbx
xxxx-prfl-isupar
xxxx-ss7-trk
xxxx-cas-trk
xxxx-prfl-sip
xxxx-prfl-sipt
xxxx-prfl-isupve
xxxx-prfl-isuppl
IUA
xxxx-iua-lnk
Subscriber
xxxx-list-screen
xxxx-aag-sub
GR303
xxxx-gr303-if
xxxx-gr303-lnk
xxxx-gr303-CRV
xxxx-gr303ua-lnk
xxxx-call-captverbose
xxxx-mgc-pc
xxxx-sg-isupproxy
xxxx-prfl-protrel
xxxx-sip-tgmapaddr
xxxx-sip-route
xxxx-mancallgap-code
xxxx-mgc-protn
xxxx-inap-acn
xxxx-sip-sys
xxxx-sip-srvrmapaddr
xxxx-vop-sys
xxxx-pm-cc
xxxx-pm-sipmsg
xxxx-reg-sf2
xxxx-pm-isupmsg
xxxx-mgc-mgmapaddr
xxxx-enum-sys
xxxx-ex-eqpt
xxxx-exsched-eqpt
xxxx-reg-enum
xxxx-pm-enum
xxxx-inap-sys
xxxx-stg-sys
xxxx-prfl-biccitu
xxxx-prfl-mgcm3ua
xxxx-mgc-m3uaas
xxxx-pm-biccmsg
xxxx-sg-m3uanettype
xxxx-reg-m3uasg
xxxx-pm-m3uasg
xxxx-reg-sctpm3uasg
xxxx-pm-sctpm3uasg
xxxx-atca-eqpt
xxxx-sccp-route
xxxx-sg-m3uaassoc
xxxx-sg-m3uaroute
xxxx-sg-m3uaas
xxxx-dd-options
xxxx-bicc-variant
xxxx-isup-variant
xxxx-state-m3uaassoc
xxxx-switch-cfg
xxxx-sub-pbx
xxxx-pm-inap
xxxx-stg-mappcoffld
<route>ENT-ROUTE:[TID]:<rtId>:[CTAG]::[BGN=<bgn>],
[RTLIST=<rtList>],[DGTMODKEY=<dgtModKey>],
[WEIGHT=<weight>];
The parameter names used for the Web API are the same as specified in the TL1 documentation, i.e., BGN,
RTLIST, DGTMODKEY, and WEIGHT. For the AID, the API maintains a consistent approach of command
modifier (no "-") and "AID" suffix. So in other words, the AID of the ENT-ROUTE command is "RouteAid".
The AID of ENT-ROUTE-LIST would be "RouteListAid". The Web API commands, parameter names and AID
are case-insensitive. A proper request for ENT-ROUTE is shown below:
The enumerations specified by the OMC-P TL1 Command Reference Guide also apply to the Lucent
Gateway Platform Switch API, with a few exceptions: The Lucent Gateway Platform Switch API standardizes
"true"/"false" values for Y/N, YES/NO, and ENABLED/DISABLED enumerations within the OMC-P TL1
Command ReferenceGuide.
Parameter defaults are specified in the OMC-P TL1 Command Reference Guide. In TL1, an ENT command
need only specify the required parameters. All others take the value of their respective defaults. Similarly, the
Lucent Gateway Platform Switch API need only specify the required parameters.
Important Because multiple switch releases are supported, the default values are not guaranteed. Alcatel-Lucent
recommends that you specify all parameters in an ENT command. In an ED command, the parameters that are
not specified retain their old values.
3.2 Web.xml
An additional reference tool that may be used in conjunction with the TL1 Reference Guide is web.xml. This
file is useful for obtaining the available parameters for a specific command. It is located in /opt/PlexView/
PlexWebApi/CurrRel. It may also be obtained via Internet Explorer using the http://<emsservername>/web.xml
URL. It is an XML based file that contains commands supported by the Web API and their respective parameter
names. For example, as shown below, the "route" command supports five parameters: RouteAid, Bgn, RtList,
DgtModKey, and Weight.
<PlexViewCommands>
...
<route>
<Params>
<RouteAid/>
<Bgn/>
<RtList/>
<DgtModKey/>
<Weight/>
</Params>
</route>
...
</PlexViewCommands>
NE
rtrv-ne, rtrv-nengfs, rtrv-nelcm,
rtrv-nemas, rtrv-nebts, rtrv-neac
act-user, canc-user
rtrv-isdn-autonum
rtrv-notes, ed-notes
rtrv-termid
rtrv-iua-asides
Important! xxxx is generic for rtrv, ent, ed, or dlt. It can be assumed that each command supports these, unless
otherwise indicated.
xxxx-ngfs-treatmenttablelist-v2
xxxx-ngfs-treatmenttable-v2
xxxx-ngfs-tonelist-v2
xxxx-ngfs-toneentry-v2
xxxx-ngfs-annclist-v2
xxxx-ngfs-anncentry-v2
xxxx-ngfs-varannclist-v2
xxxx-ngfs-varanncentry-v2
xxxx-ngfs-fs5000profiletable-v2
xxxx-ngfs-fs5000profile-v2
xxxx-ngfs-mlppprofiletable-v2
xxxx-ngfs-mlppprofilerecord-v2
xxxx-ngfs-quarantinelist-v2
xxxx-ngfs-snbprofiletable-v2
xxxx-ngfs-snbprofilerecord-v2
xxxx-ngfs-urlprofiletable-v2
xxxx-ngfs-urlprofilerecord-v2
xxxx-ngfs-servedhostslist-v2
xxxx-ngfs-servedhostsrecord-v2
xxxx-ngfs-dgcfdigitanalysis-v2
xxxx-ngfs-dgcfdarecord-v2
xxxx-ngfs-dgcfenlist-v2
xxxx-ngfs-dgcfenrecord-v2
xxxx-ngfs-dgcfnormrule-v2
xxxx-ngfs-dgcfnormrulerecord-v2
xxxx-ngfs-dgcforighostlist-v2
xxxx-ngfs-dgcforighostrecord-v2
xxxx-ngfs-dgcfprofile-v2
xxxx-ngfs-dgcfprofilerecord-v2
xxxx-ngfs-dgcftargeturi-v2
xxxx-ngfs-dgcftargeturirecord-v2
xxxx-ngfs-rtcfprofile-v2
xxxx-ngfs-rtcfprofilerecord-v2
xxxx-ngfs-scscfpsiuri-v2
xxxx-ngfs-scscfpsiurirecord-v2
xxxx-ngfs-ccbsprofile-v2
xxxx-ngfs-ccbsprofilerecord-v2
xxxx-ngfs-aintriggerrecore-v2
xxxx-ngfs-bgcftimeofdaylist-v2
xxxx-ngfs-bgcftimeofday-v2
xxxx-ngfs-bgcfntwkgwlist-v2
xxxx-ngfs-bgcfntwkgw-v2
xxxx-ngfs-bgcfdfltntwkgwtable-v2
xxx-ngfs-bgcfdfltntwkgw-v2
xxxx-ngfs-bgcfsipcontenttable-v2
xxxx-ngfs-bgcfsipcontenttype-v2
xxxx-ngfs-bgcfdirectassisttable-v2
xxxx-ngfs-bgcfdirectassistrcd-v2
xxxx-ngfs-bgcforighostclstable-v2
xxxx-ngfs-bgcforighostclsrecord-v2
xxxx-ngfs-bgcfratecttoofctable-v2
xxxx-ngfs-bgcfratecttoofcrecord-v2
xxxx-ngfs-bgcfsubsprofiletable-v2
xxxx-ngfs-bgcfsrvprovcictable-v2
xxxx-ngfs-bgcfsrvprovcicrecord-v2
xxxx-ngfs-specialcodetable-v2
xxxx-ngfs-specialcoderecord-v2
xxxx-ngfs-rtcforighostlist-v2
xxxx-ngfs-rtcforighostrecord-v2
xxxx-ngfs-bgcfsharedlclgwrttbl-v2
xxxx-ngfs-bgcfsharedlclgwrt-v2
xxxx-ngfs-bgcfofficecodestbl-v2
xxxx-ngfs-bgcfofficecodes-v2
xxxx-ngfs-bgcflclcallingareatbl-v2
xxxx-ngfs-bgcflclcallingarea-v2
xxxx-ngfs-tone-v2
xxxx-ngfs-annc-v2
xxxx-ngfs-varannc-v2
xxxx-ngfs-treatment-v2
xxxx-ngfs-bgcfpaniaccessinfotbl-v2
xxxx-ngfs-bgcfpaniaccessinfo-v2
xxxx-ngfs-bgcfpaniaccesstypetbl-v2
xxxx-ngfs-bgcfpaniaccesstype-v2
xxxx-ngfs-bgcflocalnumberrttbl-v2
xxxx-ngfs-bgcflocalnumberrt-v2
xxxx-ngfs-bgcflocalnumdatbl-v2
xxxx-ngfs-bgcflocalnumda-v2
xxxx-ngfs-bgcflocationroutetbl-v2
xxxx-ngfs-bgcflocationroute-v2
xxxx-ngfs-bgcforigsourceinfotbl-v2
xxxx-ngfs-bgcforigsourceinfo-v2
xxxx-ngfs-gtasprofile-v2
xxxx-ngfs-diameterprofile-v2
xxxx-ngfs-phonecontexttable-v2
xxxx-ngfs-phonecontextrecord-v2
xxxx-ngfs-phcontextexempttable-v2
xxxx-ngfs-phcontextexemptentry-v2
xxxx-ngfs-dialedcicvalidatedtbl-v2
xxxx-ngfs-dialedcicvalidatedrec-v2
xxxx-ngfs-siperrhandlingtable-v2
xxxx-ngfs-siperrhandlingrec-v2
xxxx-ngfs-acrchargingprofiletbl-v2
xxxx-ngfs-acrchargingprofilerec-v2
xxxx-ngfs-dgcfphonecontextlis-v2
xxxx-ngfs-dgcfphonecontext-v2
xxxx-ngfs-dgcfphonecxexemptlist-v2
xxxx-ngfs-dgcfphonecxexemptrec-v2
xxxx-ngfs-bgcfparameters-v2
xxxx-ngfs-dgcfrtcfparameters-v2
xxxx-ngfs-calltypeoptionstbl-v2
xxxx-ngfs-calltypeoptionsrecord-v2
xxxx-ngfs-psisubdomainlist-v2
xxxx-ngfs-psisubdomainrec-v2
xxxx-ngfs-ocbprogramtable-v2
xxxx-ngfs-ocbprogramrec-v2
xxxx-ngfs-servicetodiametertbl-v2
xxxx-ngfs-progrdigitstateproc-v2
xxxx-ngfs-localccfparameters-v2
xxxx-ngfs-ntmcontroltable-v2
xxxx-ngfs-ntmcontrolrecord-v2
xxxx-ngfs-ntmexemptiontable-v2
xxxx-ngfs-ntmexemptionrecord-v2
xxxx-ngfs-bgcforigsourceinfo-v2
xxxx-ngfs-enumprofiletable-v2
xxxx-ngfs-enumprofilerecord-v2
xxxx-ngfs-iscchargingprofiletbl-v2
xxxx-ngfs-iscchargingprofilerec-v2
xxxx-ngfs-sipiaport-v2
xxxx-ngfs-dgcfprefixdatable-v2
xxxx-ngfs-dgcfprefixdarecord-v2
xxxx-ngfs-emergencyurilist-v2
xxxx-ngfs-emergencyurirecord-v2
xxxx-ngfs-pnaptrtargeturi-v2
xxxx-ngfs-pnaptrregion-v2
xxxx-ngfs-homedomain-v2
xxxx-ngfs-agcfprofiletable-v2
xxxx-ngfs-agcfprofilerecord-v2
xxxx-ngfs-agcfdigitmaptable-v2
xxxx-ngfs-agcfdigitmaprecord-v2
xxxx-ngfs-agcfgwvarianttable-v2
xxxx-ngfs-agcfgwvariantrecord-v2
xxxx-ngfs-agcfgatewaytable-v2
xxxx-ngfs-agcfgwcombinedrec-v2
xxxx-ngfs-agcfdslamtable-v2
xxxx-ngfs-crfactivatetbl-v2
xxxx-ngfs-crfactivaterec-v2
xxxx-ngfs-crfcalldestinationtbl-v2
xxxx-ngfs-crfcalldestinationrec-v2
xxxx-ngfs-crfcalltypetable-v2
xxxx-ngfs-crfcalltyperec-v2
xxxx-ngfs-crfcallerratecategtbl-v2
xxxx-ngfs-crfcallerratecategrec-v2
xxxx-ngfs-crfdayprogramtable-v2
xxxx-ngfs-crfdayprogramrecord-v2
xxxx-ngfs-crfratetable-v2
xxxx-ngfs-crfraterecord-v2
xxxx-ngfs-crftariffprofiletable-v2
xxxx-ngfs-crftariffprofilerec-v2
xxxx-ngfs-crftariffselectiontbl-v2
xxxx-ngfs-crftariffselectionrec-v2
xxxx-ngfs-ngngetsidlisttable-v2
xxxx-ngfs-ngngetsidlistrecord-v2
xxxx-ngfs-bgcforighostidtbl-v2
xxxx-ngfs-bgcforighostidentify-v2
xxxx-ngfs-diamultidprec-v2
xxxx-ngfs-diamultidptbl-v2
xxxx-ngfs-siplinksettable-v2
xxxx-ngfs-siplinksetrecord-v2
xxxx-ngfs-sipdesttable-v2
xxxx-ngfs-sipdestrecord-v2
xxxx-ngfs-sippmtlkstgrptable-v2
xxxx-ngfs-sippmtlkstgrprecord-v2
xxxx-ngfs-sctpprofiletable-v2
xxxx-ngfs-sctpprofilerecord-v2
xxxx-ngfs-sblpprofiletable-v2
xxxx-ngfs-sblpprofilerecord-v2
xxxx-ngfs-sipfiltertable-v2
xxxx-ngfs-sipfilterrecord-v2
xxxx-ngfs-sipfilterheadertable-v2
xxxx-ngfs-sipfilterheaderrecord-v2
xxxx-ngfs-sipfilterparamtable-v2
xxxx-ngfs-sipfilterparamrecord-v2
xxxx-ngfs-sipfiltersettable-v2
xxxx-ngfs-sipfiltersetrecord-v2
xxxx-ngfs-commonpcscfprofiletbl-v2
xxxx-ngfs-commonpcscfprofilerec-v2
xxxx-ngfs-pcscfprofiletbl-v2
xxxx-ngfs-pcscfprofilerec-v2
xxxx-ngfs-ibcfprofiletable-v2
xxxx-ngfs-ibcfprofilerecord-v2
xxxx-ngfs-icscfprofiletable-v2
xxxx-ngfs-icscfprofilerecord-v2
xxxx-ngfs-scscfprofiletable-v2
xxxx-ngfs-scscfprofilerecord-v2
xxxx-ngfs-agcfdialplantable-v2
xxxx-ngfs-agcfdialplanrecord-v2
xxxx-ngfs-sipmesprooptions-v2
The following commands are HSS associated data. They are specified in Appendix D.
HSS
xxxx-ngfs-hssglobalifc-v2
xxxx-ngfs-hssservercapability-v2
xxxx-ngfs-hssserviceprofile-v2
xxxx-ngfs-hsstemplatefile-v2
xxxx-ngfs-hsspuidregistration-v2
xxxx-ngfs-hssprset-v2
The following commands are CTS subscribers and associated data. They are specified in Appendix D.
CTS Subscriber
xxxx-ngfs-subscriber-v2
xxxx-nfgs-psiuser-v2
xxxx-ngfs-psiextension-v2
xxxx-ngfs-authorizationcodes-v2
xxxx-ngfs-license-v2
xxxx-ngfs-protectionsite-v2
xxxx-ngfs-partyid-v2
xxxx-ngfs-subparty-v2
xxxx-ngfs-dbgwglobalsettings-v2
xxxx-ngfs-agcfendpoint-v2
The following are parameter groups that are valid for the subscriber command and can be inserted in any order:
Note: The CTS supports multiple subscriber databases. The Fsdb parameter specifies the database.
Fsdb="fsdbX", X=0, 1, 2, 3 is required for below ngfs commands:
ngfs-subscriber-v2,
ngfs-authorizationcodes-v2,
ngfs-psiuser-v2,
ngfs-psiextension-v2,
ngfs-subparty-v2,
ngfs-protectionsite-v2,
ngfs-partyid-v2,
ngfs-dbgwglobalsettings-v2
LCM Configuration
xxxx-lcm-apbsyncservice
xxxx-lcm-authenticationservice
xxxx-lcm-loggingservice
xxxx-lcm-messagingservice
xxxx-lcm-searchservice
xxxx-lcm-skinservice
xxxx-lcm-partition
xxxx-lcm-lpscalllogpackage
xxx-lcm-lpsauthpackage
xxxx-lcm-callservice
xxxx-lcm-dialingrulespackage
xxxx-lcm-feature
xxxx-lcm-featurepackage
xxxx-lcm-group
xxxx-lcm-userfeature
xxxx-lcm-userfeaturepackage
xxxx-lcm-user
xxxx-lcm-displaygroup
xxxx-lcm-psipackage
xxxx-lcm-notificationservice
xxxx-lcm-presenceservice
xxxx-lcm-notificationservice
PCM Configuration
xxxx-pcm-messagingservice
xxxx-pcm-callservice
xxxx-pcm-displaygroup
xxxx-pcm-psipackage
xxxx-pcm-presenceservice
xxxx-pcm-notificationservice
xxxx-pcm-enttopology
xxxx-pcm-entpartition
xxxx-pcm-entsubpartition
xxxx-pcm-entfeaturepool
xxxx-pcm-entfeaturetemplate
xxxx-pcm-entgroup
xxxx-pcm-entsla
xxxx-pcm-entadmin
xxxx-pcm-entuser
The Web API Java Client code and its demonstrations are subject to change. However, you can import and
modify the source code for the desired application.
For example, the "ENT-ROUTE" TL1 command is defined in the Lucent Gateway Platform switch TL1
Command Reference Guide as:
ENT-ROUTE:[TID]:<rtId>:[CTAG]::[BGN=<bgn>], [RTLIST=<rtList>],[DGTMODKEY=<dgtModKey],
[WEIGHT=<weight>];
This command is supported by the Web API. Its corresponding data bean within the Java Client provides getters
and setters for all applicable attributes:
package plxwebapiclient.beans;
The following code snipet would actually perform the ENT-ROUTE command to the switch, "myswitch", to
provision route "foo-0".
All data beans provided by the Java Client API are coded to the latest switch release specifications. It is the
customer developer's responsibility to version the data beans with respect to the various software releases
supported at the customer site.
• OMC-P Server is running and configured with an account whose username is "plxwebapi" and password is
"plxwebapi".
• The username, password, and URL are configurable via the client.properties file in the /opt/PlexView/
PlexWebApi/CurrRel/plxwebapiclient/config directory.
• Web API is installed in the /opt/PlexView/PlexWebApi/CurrRel directory. It is NOT required for the Web
API Client to run on the same server as the Web API and OMC-P server, but it is a prerequisite to build
this demonstration and provide a robust demonstration after installation. You can modify the build.xml file
according to the development platform of choice. The URL may also be specified to a specific server running
the Web API.
1.# cd /opt/PlexView/PlexWebApi/CurrRel/plxwebapiclient/tools/apache-ant/bin
> cd /opt/PlexView/PlexWebApi/CurrRel/plxwebapiclient
> build
Buildfile: build.xml
init:
[echo] Using the following settings:
[echo] Build : /tmp
[echo] JWSDP Development : /opt/PlexView/PlexWebApi/CurrRel/jwsdp-1.3/apache-ant/../
build:
[javac] Warning: src/plxwebapiclient/demo/PLXDemoSwitches.java modified in the future.
[javac] Compiling 64 source files to /tmp
BUILD SUCCESSFUL
Total time: 21 seconds
> cd /opt/PlexView/PlexWebApi/CurrRel/plxwebapiclient
> demo switches
Buildfile: build.xml
switches:
[java] act-user
[java] rtrv-ne
[java] adameve
[java] albatrosseagle
[java] dweezilmoonunit
[java] hottawotta
[java] richfamous
[java] canc-user
BUILD SUCCESSFUL
Total time: 20 seconds
> cd /opt/PlexView/PlexWebApi/CurrRel/plxwebapiclient
> demo demonstration_name
switches
physical
routing
imt
trunks
cas
ss7
isdn
iua
Please examine the respective demo Java files in
WEB_API_FAILURE 30000;
SESSION_INVALID 30001;
SESSION_TIMED_OUT 30002;
REQUEST_TIMED_OUT 30003
<filter>
<filterType></filterType>
<startAid></startAid>
<firstAid></firstAid>
<lastAid></lastAid>
<search>
<searchBy> </searchBy>
<searchString> </searchString>
<operation> </operation>
<caseSensitive> </caseSensitive>
</search>
...
<searchAnd>
<search></search>
<search></search>
...
</searchAnd>
<searchOr>
<search></search>
<search></search>
...
</ searchOr >
</filter>
Parameter Description
Name Switch Name.
Phone Phone information
Contact Contact information.
Location Location information
IsManaged Whether the switch is managed (true/false)
Parameter Description
Name Switch Name.
TimeZone Which Time Zone the Switch is Located
Status SP Status of the switch, i.e., SP-A: IS ACT&NBK, SP-B: OOS-AU
UEQ&FLT
ShelfId Shelf ID of the switch
SWRevision Configured Software Revision of the Switch, i.e., 10.XX, 11.XX,
12.XX...
SyncStatus 1 -Syncing, 2-Sync Required, 3 -Sync Sucess
Running IDLE, Syncing tablename, ...
MiHostname The MI Host name
MiIpSideA Ip address of MI side A
MiIpSideB Ip address of MI side B
SwNum 1 default value
SwitchType FS, LSM, FS_LSM, or PFS-LSM_HSS
ExtOamIpAddress Not used currently
IntOamIpAddress Not used currently
SubCfgHostname IP address or Host name of Subscriber DB
HssCfgHostname IP address or Host name of HSS DB
CfgCfgHostname IP address or Host name of CTS Cfg DB
SubCfgXmlPort Port number for Subcriber DB 7856
HssCfgXmlPort Port number for HSS DB 7857
CfgCfgXmlPort Port number for FS500 Cfg DB 9650
SnmpPort Port number for MI SNMP 8001
AdminLogin Login for the Subscriber and HSS DB
AdminPassword Password for the Subscriber and HSS DB, not displayed when rtrv
DigitCollectionMap US default value
FeatureCodeDtType Empty default value
Parameter Description
Name Switch Name.
TimeZone Which Time Zone the Switch is Located
Status SP Status of the switch, i.e., SP-A: IS ACT&NBK, SP-B: OOS-AU
UEQ&FLT
ShelfId Shelf ID of the switch
SWRevision Software version like r6.2.1.44
SyncStatus 1 -Syncing, 2-Sync Required, 3 -Sync Sucess
Running IDLE, Syncing tablename, ...
FloatingIp Floating Ip Address of Switch
SwNum 1 default value
Parameter Description
Name Switch Name.
TimeZone Which Time Zone the Switch is Located
Status SP Status of the switch, i.e., SP-A: IS ACT&NBK, SP-B: OOS-AU
UEQ&FLT
ShelfId Shelf ID of the switch
SWRevision Software version like r6.2.1.44
SyncStatus 1 -Syncing, 2-Sync Required, 3 -Sync Sucess
Running IDLE, Syncing tablename, ...
FloatingIp Floating Ip Address of Switch
SwNum 1 default value
CriticalFaults The number of critical faults
MajorFaults The number of major faults
MinorFaults The number of minor faults
SyncReportId 1 default value
SyncItem Unused
Parameter Description
Name Switch Name.
Contact Contact information.
Phone Phone information
Location Location information
IsManaged Whether the switch is managed (true/false)
IpAddress IP Address of the BTS switch
BtsStatus SP Status of the switch, i.e., SP-A: IS ACT&, SP-B: OOS-AU
UEQ&FLT
HeartbeatLossTimeout How long it lasts before losing the heartbeat
TimeZone Which Time Zone the Switch is Located
Parameter Description
Name Switch Name.
Contact Contact information.
Phone Phone information
Location Location information
IsManaged Whether the switch is managed (true/false)
IpAddress IP address of the AudioCodes
Version Software version like r6.2.1.44
AcStatus SP Status of the switch, i.e., SP-A: IS ACT&NBK, SP-B: OOS-AU
UEQ&FLT
TimeZone Which Time Zone the Switch is Located
CriticalFaults The number of critical faults
MajorFaults The number of major faults
C.2 ACT-USER
<PlexViewRequest Command="act-user" SwitchName="" RequestId="" SessionId="" MaxRows="-1">
<UserName></UserName>
<PassWord></PassWord>
</PlexViewRequest>
C.3 CANC-USER
<PlexViewRequest Command="canc-user" SwitchName="" RequestId=""
SessionId="plxwebapi:1502634561" MaxRows="-1">
</PlexViewRequest>
C.4 RTRV-ISDN-AUTONUM
This utility converts a Port AID to a TermId and its respective IuaId. This is usefull for providing an automatic
numbering scheme for ISDN entities as performed in the OMC-P.
C.5 RTRV-NOTES
<PlexViewRequest Command="rtrv-notes" SwitchName="alpha5telica" RequestId=""
SessionId="plxwebapi:926504427" MaxRows="-1">
<NotesType>prfl-isupansi</NotesType>
<NotesAid>1</NotesAid>
</PlexViewRequest>
NotesType - the modifier of the command. Limited to those supported by the Web API
NotesAId - the Aid of the entity in question
C.6 ED-NOTES
<PlexViewRequest Command="ed-notes" SwitchName="alpha5telica" RequestId=""
SessionId="plxwebapi:926504427" MaxRows="-1">
<NotesAid>1</NotesAid>
<NotesType>prfl-isupansi</NotesType>
<Notes>Super profile</Notes>
<Label>NONE</Label>
</PlexViewRequest>
C.7 RTRV-TERMID
Utility to convert PortAid to its respective TermId. Usefull utility for provisioning SS7 trunks.
C.8 RTRV-IUA-ASIDS
This utility returns the unique IUA AS ids of the specified switch. This is usefull for provisioning IUA Links.
D.1 ngfspool(rtrv)
Added for LCP-CTS R7.1.1 and later!
D.2 ngfspool-groupprofile(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! To get details provision, please view Appedix K.4 in document
D.3 ngfs-authorizationcodes-v2(rtrv,ent,ed,dlt)
All the parameters are required for ent/ed. aid is required for rtrv/dlt
D.4 ngfs-psiuser-v2(rtrv,ent,ed,dlt)
The ngfs-psiuser-v2 is used to populate the PSI user table on the FS5000. Please refer to Appendix G for detailed
provisioning procedure for this feature. All the parameters are required for ent/ed. aid is required for rtrv/dlt
(if CTS R2.0, you will also need to change the PSI
Extension PIN)
D.5 ngfs-psiextension-v2(rtrv,ent,ed,dlt)
The ngfs-psiextension-v2 is used to populate the psi extension information. Please refer to Appendix H for
detailed provisioning procedure for this feature.
(if CTS R2.0, you will also need to change the PSI
User PIN)
D.6 ngfs-bgcfdaroute-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsBgcfDaRouteAid The AID, format is:
ID`NAME`DNTYPE`DIGITSTRING`CRITERIASTRING
where:
ID-NAME is the NgfsBgcfDaRouteListAid
(parent).
[0-9]+
\+[0-9]+
\+[0-9]+&
[0-9]*&
CRITERIASTRING is an enumeration of "",
"CIC" or "CdPN". When DNTYPE is "Called
Number", it should be null, when DNTYPE is "Calling
Number", it can be "CIC" or "CdPN".
[0-9]+
+[0-9]+
+[0-9]*&
[0-9]*&
LCP-CTS R6.0 For CTS R6.0:
DIGITSTRING is a string with length of 1-16 with
the following acceptable regular expressions:
[0-9A-F]+
+[0-9A-F]+
+[0-9A-F]*&
[0-9A-F]*&
LCP-CTS R6.2 For CTS R6.2 and later:
DIGITSTRING is a string with length of 1-16 with
the following acceptable regular expressions:
[0-9A-F*#]+
+[0-9A-F*#]+
+[0-9A-F*#]*&
[0-9A-F*#]*&
ListId Integer(0-999)
(req for ent,req for ed)
LongDistance Boolean (true of false)
LCP-CTS R4.0 Deprecated in CTS R4.0 and later.
TodId LCP-CTS R4.0 Integer(0-999)
(opt for ent,opt for ed)
D.7 ngfs-bgcfdaroutelist-v2(rtrv,ent,dlt)
Parameter Name Version Description
NgfsBgcfDaRouteListAid Aid has format of ID`NAME, where ID is an integer
with range of 1-250 and NAME is an alphanumeric string
with length of 1-19. Dash is allowed in NAME.
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-999, where 0 will
auto select the table number.
D.8 ngfs-bgcfprofile-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsBgcfProfileAid Integer (1-1000)
(req for ent,req for ed)
Description String with length of 0-31.
(req for ent,req for ed)
DaRouteId ID Number which is the value of
(req for ent,req for ed) NgfsBgcfDaRouteListAid for this profile.
RemoveNtwkPrivHeaders LCP-CTS R4.0 Boolean (true or false)
(opt for ent,opt for ed)
OrigSourceInfoTblId LCP-CTS R5.0 Integer(0-999)
(opt for ent,opt for ed)
DfltLocalNumberRtTblId LCP-CTS R5.0 Integer(0-999)
(opt for ent,opt for ed)
SipProxyMode LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed)
ProcessRedirect LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
RoutingPrecedence LCP-CTS R6.0 Valid value
(opt for ent,opt for ed) o CIC over RN
o RN over CIC
Default CIC over RN
IscChargingProfileId LCP-CTS R6.0 Integer(0-20).
Should select one which has been added in ISC Charging
Profile Record.
D.9 ngfs-bgcftargeturi-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, ed is not supported.
UriType IPv4
(opt for ent,opt for ed) IPv6
Domain
Text String(default)
HeartBeat LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
AdminState LCP-CTS R4.1 Valid value: Locked or Unlocked
(opt for ent,opt for ed)
MediaAudio LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaVideo LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaApplication LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaControl LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaData LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaText LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
MediaMessage LCP-CTS R4.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
DigitTableId LCP-ISC R20.1 A string representation of the pre-defined IMS Digtit
(opt for ent,opt for ed) table by its table ID.
D.10 ngfs-bgcfuriprioritylist-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsBgcfUriPriorityListAid Integer (0-65535)
LCP-CTS R4.0 For CTS R4.0 and later:
Integer (0-9999)
Description String with length in range of 0-19
D.11 ngfs-cpeprofilerecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsCPEProfileRecordAid Aid has format:
(req for ent,req for ed) PROFILEID`NAME
where PROFILEID is the
NgfsCPEProfileTableAid, NAME is a CPE parameter
(String, length 1-40).
ProfileName Same value as ProfileName of CPE Profile Table.
(req for ent,req for ed)
String (1-20)
[a-zA-Z0-9\*#\.,\-'!$()&%/_ ]*
Value Value of the parameter (String, length of 1-100).
(req for ent,req for ed)
D.12 ngfs-cpeprofiletable-v2(rtrv,ent,dlt)
Parameter Name Version Description
NgfsCPEProfileTableAid Aid has format of PROFILEID.
(req for ent,req for ed) Integer (0-255)
ProfileName String (1-20)[a-zA-Z0-9\*#\.,\-'!$()&%/_ ]*
(opt for ent,opt for ed)
D.13 ngfs-digittable-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsDigitTableAid The Digit Table AID:
(req for ent,req for ed) ListId`MatchString
Actions:
FS:CLIR - Activate
FS:CLIR - Cancel
FS:Call Forwarding Always
Actions:
FS:CFA - Activate
FS:CFA - Deactivate
FS:CFA - Active Voice
FS:CFA - Active Data
FS:CFA - Interrogate
Below is added for R6.1 and later
FS:CFA - Activate with Parameter
FS:Call Forwarding Always to Voice Mail
Actions:
FS:CFAVM - Active Data
FS:CFAVM - Active Voice
FS:CFAVM - Activate
FS:Call Forwarding Busy
Actions:
FS:CFB - Activate
FS:CFB - Deactivate
FS:CFB - Activate Voice
FS:CFB - Activate Data
FS:CFB - Interrogate
Below is added for R6.1 and later
FS:CFB - Activate with Parameter
Actions:
FS:CFUVM - Activate
FS:CFUVM - Deactivate
FS:Call Waiting
Actions:
FS:CW - Activate
FS:CW - Deactivate
FS:CW - Cancel
FS:CW - Interrogate
FS:Do Not Disturb
Actions:
FS:DND - Activate
FS:DND - Deactivate
FS:DND - Interrogate
CTS 6.1 and later:
FS:Do Not Disturb with Custom Announcement
Actions:
Activate
FS:Selective Call Acceptance
Actions:
FS:SCA - Activate
FS:SCA - Deactivate
FS:SCA - Interrogate
FS:Selective Call Rejection
Actions:
FS:SCR - Activate
FS:SCR - Deactivate
FS:SCR - Interrogate
FS:Selective Call Forwarding
Actions:
FS:SCF - Activate
FS:SCF - Deactivate
FS:SCF - Interrogate
FS:Simultaneous Ringing
Actions:
FS:SR - Activate
FS:SR - Deactivate
FS:SR - Interrogate
FS:Blind Call Transfer
Action:
FS:BXFR - Invoke
FS:Customer Originated Trace
Action:
FS:COT - Invoke
FS:Ring Back When Free
Action:
FS:RBWF - Cancel
FS:Account Code
Action:
FS:ACCODE - Invoke
FS:Authorization Code
Action:
FS:AUTHODE - Invoke
FS:PDP Escape to POTS
Action:
FS:POTS - Invoke
FS:Dial Code Access to Voice Mail
Action:
FS:DCAVM - Invoke
FS:Dial Code Access to Attendant
Action:
FS:DCAA - Invoke
FS:Speed Call 1 Digit
Actions:
FS:SC1D - Invoke
FS:SC1D - Activate
FS:Speed Call 2 Digit
Actions:
FS:SC2D - Invoke
FS:SC2D - Activate
FS:Call Forward Always to Attendant
Actions:
FS:CFAA - Activate
FS:CFAA - Activate Data
FS:CFAA - Activate Voice
FS:Call Forward Unreachable to Attendant
Actions:
FS:CFUA - Activate
FS:CFUA - Deactivate
FS:Call Hold
Action:
FS:CH - Invoke
FS:Call Park
Action:
FS:CP - Invoke
FS:Call Retrieve
Action:
FS:CR - Invoke
FS:Call Pickup
Action:
FS:CPCK - Invoke
FS:Call Park Directed Park
Action:
FS:CPDP - Invoke
FS:Call Park Directed Retrieve
Action:
FS:CPDR - Invoke
FS:Call Pickup Directed
Action:
FS:CPD - Invoke
FS:Call Pickup Directed Barge-in
Action:
FS:CPDB - Invoke
FS:Call User Voice Mail
Action:
FS:CTUVM - Invoke
FS:MLHG Member Make Busy
Actions:
FS:MLHGMMB - Invoke
FS:MLHGMMB - Cancel
FS:MLHG Stop Hunt
Actions:
FS:MLHGSH - Invoke
FS:MLHGSH - Cancel
FS:MLHG Group Make Busy
Actions:
FS:MLHGGMB - Invoke
FS:MLHGGMB - Cancel
FS:Sequential Ringing
Actions:
FS:SQR - Activate
FS:SQR - Deactivate
FS:SQR - Interrogate
FS:Extension Bridging
Actions:
FS:EXTB - Invoke
FS:Selective Distinctive Alerting
Actions:
FS:SDA - Activate
FS:SDA - Deactivate
FS:SDA - Interrogate
LCP-CTS R3.0 For CTS R3.0 and later:
FS:Call Barring
Actions:
FS:CB - Interrogate
Below are added for R4.0 and later
FS:CB - Activate All Except Emergency
FS:CB - Activate Digit Matched
FS:CB - Activate Local Toll
FS:CB - Activate Long Distance
Actions:
FS:CFNAVM - Activate
FS:CFNAVM - Activate Voice
FS:CFNAVM - Activate Data
FS:Call Forward Unregistered to Attendant
Actions:
FS:CFURA - Activate
FS:CFURA - Activate Voice
FS:CFURA - Activate Data
FS:Call Forward Unregistered to Voice Mail
Actions:
FS:CFURVM - Activate
FS:CFURVM - Activate Voice
FS:CFURVM - Activate Data
FS:Inhibit Incoming Forwarded Calls
Actions:
FS:IIFC - Activate
FS:IIFC - Deactivate
FS:IIFC - Activate Voice
FS:IIFC - Activate Data
FS:IIFC - Interrogate
FS:MiRingBack
Actions:
FS:MRB - Activate
FS:MRB - Deactivate
FS:MRB - Interrogate
FS:Music On Hold
Actions:
FS:MOH - Activate
FS:MOH - Deactivate
FS:MOH - Interrogate
FS:Reminder Call
Actions:
FS:RC - Invoke
FS:RC - Cancel
FS:Multilevel Precedence and Preemption Access Code
Action:
FS:MPPAC - Invoke
FS:Multilevel Precedence and Preemption Route Code
Action:
FS:MPPRC - Invoke
FS:CFD - Interrogate
FS:CFD - Set Parameter
FS:Call Forward Default to Attendant
Action:
FS:CFDA - Activate
FS:Call Forward Default to Voice Mail
Action:
FS:CFDVM - Activate
FS:Call Completion to Busy Subscriber - All
Outstanding Requests
Actions:
FS:CCBSA - Cancel
FS:CCBSA - Interrogate
FS:Call Completion to Busy Subscriber - Specific
Requests
Actions:
FS:CCBSS - Cancel
FS:CCBSS - Interrogate
FS:Call Completion to Busy Subscriber Monitor
Blocking
Actions:
FS:CCBSM - Cancel
FS:CCBSM - Interrogate
FS:AIN Public Feature Code Trigger
Action:
FS:AINPFCT - Invoke
FS:AIN PDP Access Code Trigger
Action:
FS:AINPDPACT - Invoke
FS:AIN PDP Extension Trigger
Action:
FS:AINPDPET - Invoke
FS:CFU - Deactivate
FS:Consultation Transfer
Action:
FS:CT - Invoke
FS:DTMF PIN Update
Action:
FS:DTMFPU - Set Parameter
FS:OCB - Deactivate
FS:OCB - Interrogate
Action:
FS:SCFNR - Activate
FS:SCFNR - Activate with Parameter
Action:
FS:SCFU - Activate
FS:SCFU - Activate with Parameter
Action:
FS:CLIP - Activate
FS:CLIP - Deactivate
FS:CLIP - Interrogate
FS:CLIR - Activate
FS:CLIR - Cancel
FS:CLIR - Interrogate
LCP-CTS R7.0 For CTS R7.0 and later:
FS: Call Barring
Action:
Activate Mobile,
Activate Custom 4,
Activate Custom 5,
Activate Custom 6,
Activate Custom 7,
Activate Custom 8,
Activate Custom 9,
Activate Custom 10,
Activate Custom 11,
Activate Custom 12,
Activate Custom 13,
Deactivate Mobile,
Deactivate Custom 4,
Deactivate Custom 5,
Deactivate Custom 6,
Deactivate Custom 7,
Deactivate Custom 8,
Deactivate Custom 9,
Deactivate Custom 10,
Deactivate Custom 11,
Deactivate Custom 12,
Deactivate Custom 13
LCP-CTS R7.1.1 For CTS R7.1.1 and later:
FS: Line Status Check
Action:Invoke
FS:One Number
Action:
Activate with Sequential Ringing
Activate with Simultaneous Ringing
Deactivate
Interrogate
FS:Call Barring
Actions:
"Activate All Except Emergency",
"Activate Digit Matched",
"Activate Local Toll",
"Activate Long Distance",
"Activate International",
"Activate National",
"Activate Premium Services",
"Activate Emergency",
"Activate Toll Free",
"Activate Carrier Prefixed",
"Activate FGB Dialed Carrier",
"Activate Directory Assistance",
"Activate N11 Calls",
"Activate Custom 1",
"Activate Custom 2",
"Activate Custom 3",
"Activate Custom 4",
"Activate Custom 5",
"Activate Custom 6",
"Activate Custom 7",
"Activate Custom 8",
"Activate Custom 9",
"Activate Custom 10",
"Activate Custom 11",
"Activate Custom 12",
"Activate Custom 13",
"Activate Mobile",
"Activate Non-E.164",
"Activate Call Lock",
"Deactivate All Except Emergency",
FS:Prefix Call 1
Action: Invoke
FS:Prefix Call 2
Action: Invoke
FS:Prefix Call 3
Action: Invoke
Enable Boolean (true or false)
(req for ent,req for ed)
NumberType Number Type:
FS:Long Distance (Inter-LATA)
FS:Local Toll (Intra-LATA)
FS:Local
FS:Emergency Type 1
FS:Emergency Type 2
FS:Emergency Type 3
FS:Emergency Type 4
FS:Emergency Type 5
FS:Operator (Local)
FS:Operator (Long Distance)
FS:Operator (International)
FS:International Operator Assist
FS:Carrier Prefixed
FS:Feature Group B Carrier
FS:International Direct Dialed
FS:National Number
FS:N11 Code
FS:Toll Free
FS:Directory Assistance
FS:Surcharge Applies
FS:Flexible Assignment 1
FS:Flexible Assignment 2
FS:Flexible Assignment 3
For CTS R2.0 and later:
FS:Abbreviated Call
FS:Invalid Destination
FS:IDDD Carrier
FS:No Carrier
FS:No Dialed Carrier
FS:Call Type A
FS:Call Type B
FS:Non-E.164
LCP-CTS R7.0 FS:Flexible Assignment 4
FS:Flexible Assignment 5
FS:Flexible Assignment 6
FS:Flexible Assignment 7
FS:Flexible Assignment 8
FS:Flexible Assignment 9
FS:Flexible Assignment 10
FS:Flexible Assignment 11
FS:Flexible Assignment 12
FS:Flexible Assignment 13
FS:Mobile
DialedNumberTranslate Dialed Number Translation,
(req for ent,req for ed) String 1-24,
format:((NULL)|[0-9#\*+A-FXYZ]*(&)?)
CarrierSelection Valid values:
(req for ent,req for ed) Inter-Lata
ReRun ReRun translation -
Digit Table Id or 0 for None
LCP-CTS R7.0 or 7 for Stop
or 8 for Restart
Action Please refer to the Action(s) in Service
(req for ent,req for ed)
OperationType Operation Type:
(req for ent,req for ed) Translation
Service Selection
AinTriggerId LCP-CTS R4.0 AIN Trigger ID, Integer(0-1024), 0 for none.Only
(opt for ent,opt for ed) required when Service indicates an AIN service, na for
other services.
DigitCollectionMethod LCP-CTS R4.0 Valid values:
(opt for ent,opt for ed) Immediate
Variable
Normal
BarringExempt LCP-CTS R5.0 Boolean(true or false)
(opt for ent,opt for ed)
GetsAccessNumber LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) It is not editable in following two conditions:
D.14 ngfs-digittablelist-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsDigitTableListAid The Digit Table number, same value as ListId,
(req for ent,req for ed) Integer(1000-4000)
ListId The Digit Table number,
(req for ent,req for ed) Integer(1000-4000)
ListName The Digit Table name, String(1-20)
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_ ]*
ListType LCP-CTS R3.0 For FS R3.0 changed:
Local Call Barring to Call Barring
For FS R3.0 added:
Number Classification
Call Forward Screening
The Digit Table type:
Feature Code and Prefix
E.164 normalize
Local Call Barring
Private Dialing
LCP-CTS R5.0 For FS R5.0 added:
Call Forward Screening
OCB White List
Outgoing Call Barring
D.15 ngfs-hssglobalifc-v2(rtrv,ent,ed,dlt)
The ngfs-hssglobalifc-v2 is used to poplutate the hss database with global ifcs.All the parameters are required
for ent/ed. aid is required for rtrv/dlt
D.16 ngfs-hsspuidregistration-v2(rtrv,ed,dlt)
The ngfs-hsspuidregistration-v2 is used to get the HSS registrations status.
D.17 ngfs-hssservercapability-v2(rtrv,ent,ed,dlt)
The ngfs-hssservercapability-v2 is used to populate the hss database with servercapablities. All the parameters
are required for ent/ed. aid is required for rtrv/dlt
D.18 ngfs-hssserviceprofile-v2(rtrv,ent,ed,dlt)
The ngfs-hssserviceprofile-v2 is used to populate the hss database with service profiles. All the parameters are
required for ent/ed. aid is required for rtrv/dlt
D.19 ngfs-hsstemplatefile-v2(rtrv,ent,ed,dlt)
The ngfs-hsstemplatefile-v2 is used to populate the hss database with templatefiles. All the parameters are
required for ent/ed. aid is required for rtrv/dlt
D.20 ngfs-hssprset-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
D.21 ngfs-hsssettings-v2(rtrv,ed)
Added for LCP-CTS R6.2.1 and later!
<Aid>Global Settings</Aid>
HSSInUse LCP-CTS R6.2.1 This setting indicates whether the iHSS is expected to
(na for ent,req for ed) be in use operationally (i.e. whether it is the HSS of
choice for serving any subscribers).
Long int
Default:0
ExternalAccess LCP-CTS R6.2.1 This boolean option controls whether the iHSS/SLF
(na for ent,req for ed) listens for connections on an external (true) or internal
(false) IP address. If true, use of a "client access
authorization list" (see HssClientIp element) is also
enabled, in order to limit Diameter connection
D.22 ngfs-hssclients-v2(rtrv,ent,dlt)
Added for LCP-CTS R6.2.1 and later!
D.23 ngfs-hsslist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
Integer (1-255)
Default:1
HssFqdn LCP-CTS R6.2.1 HssFqdn is the HSS destination FQDN (or IP
(req for ent,req for ed) address)
String (1-100)
[\+0-9a-zA-Z(),':@&=\|\-_\.!~\*%;]*
HssPort LCP-CTS R6.2.1 HssPort is the IP port that the SLF will return to
(req for ent,req for ed) clients in Diameter RedirectHost AVPs.
Integer (0-65535)
Default:11022
D.24 ngfs-fephflowpolicy-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! ngfs-fephflowpolicy-v2
InboundSmallPacketRateLimit LCP-ISC R20.0.1 Specifies the number of small packets per second that are
(opt for ent,opt for ed)
allowed to be received from a source IP address and port
number. A small packet is any packet less than 300 bytes
of IP payload.
MinimumUDPDatagramSize LCP-ISC R20.0.1 Specifies the minimum allowed UDP datagram size (based
(opt for ent,opt for ed) on size of the Ethernet frame in which it resides).
MinimumFragmentSize LCP-ISC R20.0.1 Specifies the minimum allowed size of an initial or
(opt for ent,opt for ed) intermediate fragment, as measured by the size of the
Ethernet frame in which it resides. (Note that the last
fragment of a sequence has no minimum size.)
SipInspection LCP-ISC R20.1.1 Boolean (true or false)
(opt for ent,opt for ed)
D.25 ngfs-fephaggregateflowpolicy-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! FEPH Aggregate FLow Policy
D.26 ngfs-fephaggregatepacketpolicy-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! fephaggregatepacketpolicy
TotalIpPacketRateLimit LCP-ISC R20.0.1 Specifies the total number of physical bits Ethernet
(opt for ent,opt for ed) header and trailer plus payload) per second that are
allowed to be forwarded to/through the entity to which the
policy is assigned.
TotalIpPktInitialFragmentRate LCP-ISC R20.0.1 Specifies the total number of initial packet fragments per
(opt for ent,opt for ed)
second that are allowed to be forwarded to/through the
entity to which the policy is assigned.
TotalIcmpRateLimit LCP-ISC R20.0.1 Specifies the total number of ICMP messages per second
(opt for ent,opt for ed) that are allowed to be forwarded to/through the entity to
which the policy is assigned.
D.27 ngfs-fephaggregatepolicyassignment-
v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! ngfs-fephaggregatepolicyassignment-v2
D.28 ngfs-fephenabledservrec-v2(rtrv,ed)
Added for LCP-ISC R20.1.1 and later!
D.29 ngfs-hsschargedestination-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
Integer:1-255
Default:0
ChargeDestName LCP-CTS R6.2.1 Must be a valid diameter URI with format as:
aaa[s]://FQDN[port][transport][protocol].
String (1-100)
[+0-9a-zA-Z(),':@&=\\|\\-_\\.!~\\*%;/]*
LCP-CTS R7.1 Must be a valid Diameter URI with format as:
aaa[s]://FQDN[port][transport][protocol].
String (1-100)
[+0-9a-zA-Z(),':@&=\\|\\-_\\.!~\\*%;\\[\\]/]*
D.30 ngfs-hsschargeinfo-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
Integer: 1 - 255.
Default:0
Zero is reserved for use in PrivateIdDataDetails to
specify that the subscriber has no charging information.
D.31 ngfs-license-v2(rtrv,ent,ed,dlt)
The ngfs-license-v2 is used to get the subscriber license data. Note: if you want to retrieve
OfficeId and CurrentUse, you should add [refresh] behind the CategoryString. For example:
<CategoryString>RESIDENTIALSUBSCRIBER_R2[refresh]</CategoryString>
String
SignKey When add/modify a license, must provide the SignKey.
(req for ent,req for ed,na for rtrv)
String(44-90). [+0-9a-zA-Z/=]*
LockKey When add/modify a license, must provide the LockKey.
RESIDENTIALSUBSCRIBER_R2
SERVICEBUNDLE{2-64}
ATTENDANTLIMIT
SHORTCODELIMIT
SELECTIVENOMADICBLOCKING
MLHGQUEUING
GLSACCESS
LCP-CTS R7.1.1 valid value: FEATUREPROFILES
ValidSubFeatures The sub features of other features or other capabilities,
(na for ent,na for ed) these sub features are used for full features. Valid
value:
D.32 ngfs-localcallingarea-v2(rtrv,ent,dlt)
Parameter Name Version Description
NgfsLocalCallingAreaAid AID with format:
(req for ent,req for ed) LATA`LOCALAREA`MUNICIPALITY
D.33 ngfs-mediaparameters-v2(rtrv,ed)
Parameter Name Version Description
NgfsMediaParametersAid Has the value of 1
(req for ent,req for ed)
Locale Regular expression of
(req for ent,opt for ed) "(([a-zA-Z]{2})[_]([a-zA-Z]{2}))|(([a-zA-Z]{3})[_]([a-
zA-Z]{3}))|(([a-zA-Z]{2})[_]([a-zA-Z]{3}))|(([a-zA-Z
]{3})[_]([a-zA-Z]{2}))". For example en_us or eng_usa
FileServer Enumeration: "FS 5000" or "MRF"
(req for ent,opt for ed)
Directory Alphanumeric string with length in range of 1-64.
(req for ent,opt for ed)
WebserverIP IP Address format XXX.XXX.XXX.XXX where
XXX can be 000-255.
Integer(1000-10000)
MiRingbackId LCP-CTS R3.0 MiRingBack URL Profile
(opt for ent,opt for ed) Integer(1-100)
MusicOnHoldId LCP-CTS R3.0 MOH URL Profile
(opt for ent,opt for ed) Integer(1-100)
AddressExtraDigitTimer LCP-CTS R4.0 Integer(1000-24000)
(opt for ent,opt for ed) Default 16000
AddressFirstDigitTimer LCP-CTS R4.0 Integer(1000-24000)
(opt for ent,opt for ed) Default 16000
AddressInterDigitCritTimer LCP-CTS R4.0 Integer(1000-5000)
(opt for ent,opt for ed)
Default 4000
AddressInterDigitTimer LCP-CTS R4.0 Integer(1000-24000)
(opt for ent,opt for ed) Default 16000
DigitExtraDigitTimer LCP-CTS R4.0 Integer(1000-10000)
(opt for ent,opt for ed) Default 1000
DigitFirstDigitTimer LCP-CTS R4.0 Integer(1000-10000)
(opt for ent,opt for ed) Default 5000
DigitInterDigitCritTimer LCP-CTS R4.0 Integer(0 or 1000-10000)
(opt for ent,opt for ed) Default 2000
DigitInterDigitTimer LCP-CTS R4.0 Integer(0 or 1000-10000)
(opt for ent,opt for ed) Default 2000
AinAnncIdBaseStr LCP-CTS R4.0 String(0-256)
(opt for ent,opt for ed) [a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]
MRFType:
EMRS
AC-IPM2000
AC-IPM5000
NumberOfPorts:
Integer(30-12000)
Remarks:
String(0-16)
LCP-CTS R4.1 For CTS 4.1 to 6.0, changed EMRS to
ALU-EMRS
RouteHeaderType:
IPv4(default)
IPv6(only for ATCA Platform)
Domain
Text String
D.34 ngfs-npatolatatolocal-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsNpaToLataToLocalAid String representing NpaNxx of six characters with
(req for ent,req for ed) regular expression of "[2-9][0-9][0-9][2-9][0-9][0-9]".
Lata Integer with range of 100-999
(req for ent,req for ed)
LocalArea Integer with range of 0-511
(req for ent,req for ed)
D.35 ngfs-treatmenttable-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported.
For example:
Anncmt^100^90`VarAnncmt^102^1`Anncmt^100^91`Tone^101^12
D.36 ngfs-toneentry-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported.
D.37 ngfs-anncentry-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported.
D.38 ngfs-varanncentry-v2(rtrv)
Only can retrieve variable announcement entries.
DigitNDN
DateMDY
DateDMY
DateYMD
MoneyUSD
NumberCardinal
NumberOrdinal
TimeT12
TimeT24
D.39 ngfs-quarantinelist-v2(rtrv,ent,dlt)
Only can retrieve quarantine list.
D.40 ngfs-protectionsite-v2(rtrv)
Only can retrieve the protection sites.
D.41 ngfs-fs5000profile-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Format of TableId`ProfileId
(req for ent,req for ed)
TableName String with length of 1-19
(opt for ent,opt for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_^ ]*
ProfileId Integer(1-31)
(req for ent,req for ed)
TableId Integer(1-1500)
(req for ent,req for ed)
AcrChargingProfile Charging profile. Integer(1-20)
LCP-CTS R6.1 Deperacated from CTS R6.1
ChargingProfile LCP-CTS R6.1 Charging profile. Integer(1-20)
(opt for ent,opt for ed)
CarrierMode Value of :
(req for ent,req for ed) None
LATA
IN Query
Digit Analysis Mode 1
Digit Analysis Mode 2
Digit Analysis Mode 3
CarrierPrefix String with length of 1-8 or null stringall printable
(req for ent,req for ed) characters
CnameIpTimer Integer(1-10)
(req for ent,req for ed)
CnameTcapProxyIp Ip address of Tcap Proxy
(req for ent,req for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
CnameTcapProxyPort Tcap Proxy Port. Integer(1-65535)
(req for ent,req for ed)
DatabaseServerIp Floating IP address of FSDB
(req for ent,req for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
Icscf URI of I-cscfString with length of
(req for ent,req for ed) 0-210[a-zA-Z0-9\.\-]*
InternationalPrefix String with length of 1-4 or null stringall printable
(req for ent,req for ed) characters
InviteTimer Integer(15-300)
LCP-CTS R7.1 Originating Invite Response Timer.
Integer(15-300), default is 30.
MaxSimFwdCall Integer(1-800)
(req for ent,req for ed)
NationalPrefix String with length of 1-4 or null string all printable
(req for ent,req for ed)
characters
SendCallTypeToMGCF Boolean(true or false)
(req for ent,req for ed)
SmdiPort Integer(1-65535)
(req for ent,req for ed)
WebPortalPort Integer(1-65535)
(req for ent,req for ed)
WebPortalTimer Integer(1-30)
(req for ent,req for ed)
SmdiRemoteTsIpList IP address.
(req for ent,req for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
DpsRetryTimer LCP-CTS R4.0 Integer(0-32) default 3
(opt for ent,opt for ed)
DoRAEarly180Timer LCP-CTS R4.0 0 or Integer(100-5000) default 500
(opt for ent,opt for ed)
DefaultEarly180Timer LCP-CTS R4.0 0 or Integer(100-10000) default 4000
(opt for ent,opt for ed)
AinT1Timer LCP-CTS R4.0 Integer(1-5) default 3
(opt for ent,opt for ed)
OhdEscapeList LCP-CTS R4.0 Select one digittable id from the configed digit talbe,
(opt for ent,opt for ed) which table type is Number Clarification.
0 or Integer(1000-4000)
AinPQPrefixTable LCP-CTS R4.0 Select one digittable id from the configed digit talbe,
(opt for ent,opt for ed) which table type is Feature Code and Prefix.
0 or Integer(1000-4000)
AinPQDPTable LCP-CTS R4.0 Select one digittable id from the configed digit talbe,
(opt for ent,opt for ed) which table type is E.164 normalize.
0 or Integer(1000-4000)
NumActiveReminderCalls LCP-CTS R5.0 There is a drop down list for this field. Integer(1-24),
(opt for ent,opt for ed) default is 1.
SupportSIPForking LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) default false
PsiForOrigInvites LCP-CTS R5.0 Boolean (true or false)
default false
LCP-CTS R6.1 Deperacated from CTS R6.1
PsiSIPURI LCP-CTS R5.0 String (0-80)
(opt for ent,opt for ed)
SipDiversionInfo LCP-CTS R5.0 Values:
(opt for ent,opt for ed) Include only SIP Diversion Header, Include only
SIP History-Info Header, Include both SIP Diversion
and SIP History-Info Header.
RemovePhoneCtxtAfterUse Boolean (true or false) default true
(opt for ent,opt for ed)
IdddPIC LCP-CTS R5.0 Values:
(opt for ent,opt for ed) PIC1, PIC2, PIC3, PIC4, NONE.
NationalPIC LCP-CTS R5.0 Values:
(opt for ent,opt for ed) PIC1, PIC2, PIC3, PIC4, NONE.
RemapCicToDigits LCP-CTS R5.0 Boolean (true or false) default false
(opt for ent,opt for ed)
RemapCicAccessCode LCP-CTS R5.0 Integer: [0-9]*Length: (0-4)
(opt for ent,opt for ed)
CliScreening LCP-CTS R7.0 Boolean (true or false) default false
(opt for ent,opt for ed)
CpcUse LCP-CTS R7.1 CPC Use
(opt for ent,opt for ed) Used by the originating CTS to determine whether the
CPC should be populated to the P-Asserted-ID.
RelayCpc LCP-CTS R7.1 Relay CPC
(opt for ent,opt for ed) Used by the terminating CTS to determine whether the
CPC in the PAID and From header should be included in
the INVITE sent toward the CPE.
ArRecordingRulesVocmail LCP-CTS R7.1 AR Recording Rules for Forward to Voicemail
(opt for ent,opt for ed)
ArRecordingRulesNonVocmail LCP-CTS R7.1 AR Recording Rules for Forward to Non-Voicemail
(opt for ent,opt for ed)
ArRecordingRulesNotDisturb LCP-CTS R7.1 AR Recording Rules for Do Not Disturb
(opt for ent,opt for ed)
InterMsgDelay LCP-CTS R7.1 Integer: 0-255
(opt for ent,opt for ed) Inter-message Delay
UseNotifyEffic LCP-CTS R7.1 Use Notify-Efficiency
(opt for ent,opt for ed) Specifies whether the Notify-Efficiency capability
should be used by the CTS.
UnsubAfterDel LCP-CTS R7.1 Unsubscribe After Deletion
(opt for ent,opt for ed) Allows the CTS to determine the appropriate PUR
data format
(SNR) to unsubscribe.
MultiSiInPur LCP-CTS R7.1 Multiple SIs in PUR
(opt for ent,opt for ed) Whether multiple Service Indications should be
included within the PUR UserData.
OptionResp LCP-CTS R7.1 OPTION response when TAS is unable to communicate
(opt for ent,opt for ed) with FSDB.
UseVpnNumForCallerId LCP-CTS R7.1 Use VPN Numbers for Caller ID
(opt for ent,opt for ed)
ReplaceFromHeaderForCallerId LCP-CTS R7.1 Replace From Header only for Caller ID
(opt for ent,opt for ed)
MaxForkedRespPerInvite LCP-CTS R5.0 Integer (1-200) default: 100
(opt for ent,opt for ed)
EnableSipErrorHandling LCP-CTS R5.0 Boolean (true or false) default false
(opt for ent,opt for ed)
CwNoAnswerTimer LCP-CTS R5.0 Integer (10-300) default 30
Conditional
OBRPrefix LCP-CTS R7.0 Null(default), String (1-6)
(opt for ent,opt for ed) [0-9A-F]
OBRDefaultCarrier LCP-CTS R7.0 Null(default), String (1-7) [0-9]
(opt for ent,opt for ed)
RemovedNtwOwnCarrierInfo LCP-CTS R7.0 Boolean (true or false) default false. When set to true,
(opt for ent,opt for ed) the CTS will check if the carrier used on a call is
owned by the network operator. If so, the CTS will
not include a dialed carrier code in the user part of the
Request URI and will not include a "cic" parameter in
the Request URI
BlockUnmatchDigString LCP-CTS R7.0 Indicate whether the CTS will treat an unmatched digit
(opt for ent,opt for ed) string as an invalid call attempt.
D.42 ngfs-mlppprofiletable-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsMLPPProfileTableAid Aid of MLPP Profile Table.Format of TableId
(req for ent,req for ed)
TableName String with length of 1-19
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_^ ]*
TableId Integer(1-1500)
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-1500, where 0 will
auto select the table number
D.43 ngfs-mlppprofilerecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsMLPPProfileRecordAid Aid of MLPP Profile Record.Format of
(req for ent,req for ed) TableId`ProfileId
Description String (1-31)
(req for ent,req for ed)
TableName String with length of 1-19
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_^ ]*
ProfileId Integer, always fixed to "1"
(req for ent,req for ed)
TableId Integer(1-1500)
(req for ent,req for ed)
AlertInfoValue Precedence Audible Alert-info
(req for ent,req for ed) String (1-60)
D.44 ngfs-partyid-v2(rtrv)
The ngfs-partyid-v2 is used to get all PartyIDs. Leave the aid to empty. (Only the PartyIDs that are Primary
entries are returned, Protection entries are not returned.)
D.45 ngfs-fs5000profiletable-v2(rtrv,ent,dlt)
Parameter Name Version Description
aid Aid of Fs5000 Profile Table.Format of TableId
(req for ent,req for ed)
TableName String with length of 1-19
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_^ ]*
TableId Integer(1-1500)
(req for ent,req for ed)
D.46 ngfs-tonelist-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported. TableId is 1.
D.47 ngfs-annclist-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported. TableId is 2.
D.48 ngfs-treatmenttablelist-v2(rtrv,ent,ed)
For FS5000 R2.1, only rtrv is supported. TableId is 4.
D.49 ngfs-varannclist-v2(rtrv,ent,ed,dlt)
For FS5000 R2.1, only rtrv is supported. TableId is 3.
D.50 ngfs-snbprofilerecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of Selective Nomatic Blocking Profile
(req for ent,req for ed) Record.Format of TableId`ProfileId
ProfileId Integer, always fixed to "1"
(req for ent,req for ed)
TableId Integer(1-1500)
(req for ent,req for ed)
CallCenterDN String (0-32), default blank
(req for ent,req for ed)
ExceptionDNDigitTbl Integer(1000-4000)
(req for ent,req for ed)
IncomingCallTrmt The type of Incoming Call Treatment
(req for ent,req for ed) Valid value: Block, Divert to VoiceMail, Allow
D.51 ngfs-snbprofiletable-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of Selective Nomatic Blocking Profile Table.Same
(req for ent,req for ed) as TableId
TableId Integer(1-1500)
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-1500, where 0 will
auto select the table number
TableName String with length of 1-19
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_^ ]*
D.52 ngfs-urlprofilerecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of URL Profile Record.Format of
(req for ent,req for ed) TableId`RecordId
TableId Integer(1-1500)
(req for ent,req for ed)
RecordId Integer(1-100)
(req for ent,req for ed)
URL String with length of 1-94
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_ ]*
D.53 ngfs-urlprofiletable-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of URL Profile Table.
(req for ent,req for ed) Same as TableId
TableId Integer(1-1500)
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-1500, where 0 will
auto select the table number
D.54 ngfs-dgcfdigitanalysis-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.55 ngfs-dgcfdarecord-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.56 ngfs-dgcfenlist-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
TableId Integer(1-1500)
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-1500, where 0 will
auto select the table number
D.57 ngfs-dgcfenrecord-v2(rtrv,ent,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.58 ngfs-dgcfnormrule-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.59 ngfs-dgcfnormrulerecord-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.60 ngfs-dgcforighostlist-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.61 ngfs-dgcforighostrecord-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.62 ngfs-dgcfprofile-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.63 ngfs-dgcfprofilerecord-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.64 ngfs-dgcftargeturi-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.65 ngfs-dgcftargeturirecord-v2(rtrv,ent,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.66 ngfs-rtcfprofile-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.67 ngfs-rtcfprofilerecord-v2(rtrv,ent,ed,dlt)
Deprecated in LCP-ISC 20.0 in OMC-P R14.3
D.68 ngfs-servedhostslist-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of Served Host List.Same as TableId
(req for ent,req for ed)
TableName String with length of 1-19
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-'!$()&%/_ ]*
TableId Integer(1-1500)
LCP-CTS R4.1 For CTS R4.1, the ID range is 0-1500, where 0 will
auto select the table number
D.69 ngfs-servedhostsrecord-v2(rtrv,ent,dlt)
Parameter Name Version Description
aid Aid of Served Host Record.Format of
(req for ent,req for ed) TableId`HostName
TableId Integer(1-1500)
(req for ent,req for ed)
Hostname If HostType is Domain, String with length
(req for ent,req for ed) 1-256[A-Za-z\.] and . can not be written continuously. If
HostType is IP Address format
XXX.XXX.XXX.XXX where XXX can be 000-255.
Hosttype Valid Value: Domain, IP Adress,
default is Domain
default is Domain.
SubnetMask LCP-CTS R6.1 Int_0_128
(opt for ent,opt for ed) If HostType is Domain, the SubnetMask should only be
0.
D.70 ngfs-scscfpsiuri-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.0 and later!
D.71 ngfs-scscfpsiurirecord-v2(rtrv,ent,dlt)
Added for LCP-CTS R4.0 and later! All the parameters are required.
D.72 ngfs-ccbsprofile-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.0 and later!
D.73 ngfs-ccbsprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.0 and later!
D.74 ngfs-aintriggerrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.0 and later!
String(0-20)[a-zA-Z0-9\*#\.,\-'!$()&%/_ ]
CalledPartyTranslationType LCP-CTS R4.0 Integer(0-255) default 0
(req for ent,req for ed)
DefaultRoutingTreatment LCP-CTS R4.0 It is valid only when TriggerType is "None"
(req for ent,req for ed)
Valided value:
Terminate Call to AIN Fault treatment
Allow Call to Proceed
DeriveGlobalTitleAddrBy LCP-CTS R4.0 Valided value:
(req for ent,req for ed) Use Called Party
User Charge Party Address
Alternate GT
MapTrunkGroupToType LCP-CTS R4.0 It is valid only when OverrideNormalTrunkGrpResp
(req for ent,req for ed) isn't "None" Integer(0-255) default 0
OverrideNormalCallingNumResp LCP-CTS R4.0 It is valid only when TriggerType is "None"
(req for ent,req for ed)
Valided value:
None
Perform NP Processing
OverrideNormalTrunkGrpResp LCP-CTS R4.0 It is valid only when TriggerType is "None"
(req for ent,req for ed)
Valided value:
None
Map Trk Grp to G.Digits
Map Trk Grp to G.Address
PointCode LCP-CTS R4.0 It is valid only When RoutingMethod is "Route To
(req for ent,req for ed) STP To Perform GTT" or "Route To SCP
Application"
Format as (0-255).(0-255).(0-255)
PostQueryTranslation LCP-CTS R4.0 Valided value:
(req for ent,req for ed) Use AIN Post-Query Tables
Use Pre-Query Dialing Plan
ReplaceCalledPidWith LCP-CTS R4.0 It is valid only when TriggerType is "None"
(req for ent,req for ed)
Valided value:
None
Ported Num GAP
RoutingMethod LCP-CTS R4.0 Valided value:
(req for ent,req for ed) Obtain Route From Switch GTT
Route To STP To Perform GTT
Route To SCP Application
ScpSubSystem LCP-CTS R4.0 It is valid only when RoutingMethod is "Route To
(req for ent,req for ed) SCP Application"
D.75 ngfs-bgcfntwkgwlist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
Id LCP-CTS R4.1 Integer(1-999), where 0 will auto select the table number
(req for ent,req for ed)
D.76 ngfs-bgcfntwkgw-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.77 ngfs-bgcftimeofdaylist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.78 ngfs-bgcftimeofday-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.79 ngfs-bgcfsipcontenttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later! Note: only support one BGCF SIP Content Type Table.
D.80 ngfs-bgcfsipcontenttype-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.81 ngfs-bgcfdfltntwkgwtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later! Note: only support one BGCF Default Network Gatework Table.
D.82 ngfs-bgcfdfltntwkgw-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.83 ngfs-bgcfdirectassisttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.84 ngfs-bgcfdirectassistrcd-v2(rtrv,ent,dlt)
Added for LCP-CTS R4.1 and later!
D.85 ngfs-bgcforighostclstable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later! Note: only support one BGCF Originating Host Class Profile Table.
D.86 ngfs-bgcforighostclsrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.87 ngfs-bgcfratecttoofctable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.88 ngfs-bgcfratecttoofcrecord-v2(rtrv,ent,dlt)
Added for LCP-CTS R4.1 and later!
D.89 ngfs-bgcfsubsprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.90 ngfs-bgcfsubsprofilerecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
aid Aid of BGCF Subscriber Profile Table. Format as
(req for ent,req for ed) TableId`SubscriberId
NtwkGwId Integer (0-999)
(req for ent,req for ed)
DfltNtwkGwId Integer (1-32)
(req for ent,req for ed)
TableId Integer (1-999)
(req for ent,req for ed)
CountryInd Valid value: US, Non-US
(req for ent,req for ed)
SubscriberId String (1-255)
(req for ent,req for ed) [a-zA-Z0-9\*#\.\-'!\\$@_:;=()&%/ ]*
Pic String (0-8) [0-9]*
(req for ent,req for ed)
Lpic String (0-8) [0-9]*
(req for ent,req for ed)
Clli String (0-11) [a-zA-Z0-9]*
(req for ent,req for ed)
RtPreDigits String (0-11) [0-9]*
LCP-CTS R6.0 From CTS R6.0:
String (0-11) [0-9A-F]*
LCP-CTS R6.2 From CTS R6.2 and later:
String (0-11) [0-9A-F*#]*
DirectAssistId Integer (0-99)
(req for ent,req for ed)
D.91 ngfs-bgcfsrvprovcictable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.92 ngfs-bgcfsrvprovcicrecord-v2(rtrv,ent,dlt)
Added for LCP-CTS R4.1 and later!
D.93 ngfs-specialcodetable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later! Note: only support one Special Code Table
D.94 ngfs-specialcoderecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
(1-15)[a-zA-Z0-9\*#]*
ImsGeoIdType LCP-CTS R4.1 Valid value:
(req for ent,req for ed) GSA, State, ZIP Code
CircuitGeoIDType LCP-CTS R4.1 Valid value:
(req for ent,req for ed) MSC, PLMNID, PLMNID-LAC
D.95 ngfs-rtcforighostlist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.96 ngfs-rtcforighostrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
default is Domain.
SubnetMask LCP-CTS R6.1 Integer (0-128)
(opt for ent,opt for ed) If HostType is Domain, the SubnetMask should only be
0.
RtcfClass LCP-CTS R4.1 Integer (0-1024)
(req for ent,req for ed)
AllowRouteIms LCP-CTS R4.1 Boolean (true or false)
(req for ent,req for ed)
AllowRoutePstn LCP-CTS R4.1 Boolean (true or false)
(req for ent,req for ed)
AllowRouteTransitSip LCP-CTS R4.1 Boolean (true or false)
(req for ent,req for ed)
RouteBasedOnCgpn LCP-CTS R6.0 Boolean (true or false)
D.97 ngfs-bgcfsharedlclgwrttbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.98 ngfs-bgcfsharedlclgwrt-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.99 ngfs-bgcfofficecodes-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.100 ngfs-bgcfofficecodestbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.101 ngfs-bgcflclcallingareatbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R4.1 and later!
D.102 ngfs-bgcflclcallingarea-v2(rtrv,ent,dlt)
Added for LCP-CTS R4.1 and later!
D.103 ngfs-ngssparameters-v2(rtrv,ed)
Parameter Name Version Description
aid The Aid of NGSS Parameters.
(req for ent,req for ed) Always set to 1
LocalZone String(1-129) [a-zA-Z0-9\.\-,]*
(req for ent,na for ed)
DefaultHomeDomain LCP-CTS R5.0 String (0-255)
(opt for ent,opt for ed) [a-zA-Z0-9]([a-zA-Z0-9\-]{0,62})([\.][a-zA-Z0-9]([a-zA
-Z0-9\-]{0,62}))*
Default "e164.arpa"
EnumDomainServerIpList LCP-CTS R5.0 Added in CTS R5.0 and later.
(opt for ent,na for ed) Value range is IPAddress1 IPAddress2 IPAddress3.
BgcfCicLength LCP-CTS R5.0 String (0-1)[1-8]*
(opt for ent,opt for ed)
AlertingTimer LCP-CTS R5.0 Integer(4-14)
(opt for ent,opt for ed)
SipAltRouteForSip503 LCP-CTS R5.0 Boolean( true or false)
(opt for ent,opt for ed) Default false
IsupToSipCauseCodeMapId LCP-CTS R5.0 Integer(0-16)
(opt for ent,na for ed)
SipToIsupCauseCodeMapId LCP-CTS R5.0 Integer(0-16)
(opt for ent,na for ed)
IsupHop LCP-CTS R5.0 Integer(1-31)
(opt for ent,opt for ed)
SipForwards LCP-CTS R5.0 Integer(1-255)
(opt for ent,opt for ed)
HomeDomain String (0-255)
[a-zA-Z0-9]([a-zA-Z0-9\-]{0,62})([\.][a-zA-Z0-9]([a-zA
-Z0-9\-]{0,62}))*
LCP-CTS R5.0 Deprecated in CTS R5.0 and later
AuthenticationRealm String(0-255)
(req for ent,opt for ed) [a-zA-Z0-9]([a-zA-Z0-9\-]{0,62})([\.][a-zA-Z0-9]([a-zA
-Z0-9\-]{0,62}))*
HomeICSCF String(0-255)
(req for ent,opt for ed) [a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]*
DefaultIBCF String(1-255)
(req for ent,opt for ed) [a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]*
Default false
PercSimultaneousTcpConn LCP-CTS R5.0 Integer(0-100)
(opt for ent,opt for ed) Default 0
InhibitUdpTcpSwitch LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
The 'Inhibit All SIP UDP/TCP Switch' impacts
the ISC behavior allowing it to switch from UDP to
TCP and it overrides the 'SIP Gm UDP/TCP Switch'
(UdpTcpSwitch) parameter
setting.
SipMessageScreening LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
TopologyHidingHostString string:0~40 without IP address
(opt for ent,opt for ed) default:HomeIMS.net
ShortenedExpirationTime LCP-CTS R6.2 Integer.
(opt for ent,opt for ed) Range: 0 - 300
Default value: 30.
PriorityMode LCP-ISC R18.0 None, CPC, RPH
(opt for ent,opt for ed) Default: None
GETSETSValue LCP-ISC R18.0 ets.0, ets.1, ets.2, ets.3, ets.4
(opt for ent,opt for ed) Default : ets.0
GETSFeatureCode LCP-ISC R18.0 String of 3 digits preceded by a *, no hex digits
(opt for ent,opt for ed)
Default : *272
ImsCoreIpVersion LCP-CTS R6.2 Range: IPv4 or IPv6
(opt for ent,opt for ed) Default: IPv4
SessionBwLimitControl LCP-ISC R20.0 Boolean, default: false
(opt for ent,opt for ed)
SessionBwGenAlarm LCP-ISC R20.0 Boolean, default: false
(opt for ent,opt for ed)
PortedParameter LCP-CTS R6.2.1 Either "None" or "1 - DN Ported"
(opt for ent,opt for ed)
QorPrefix LCP-CTS R6.2.1 null or up to 15 hexadecimal characters
(opt for ent,opt for ed)
SpdfNodeFunctionality LCP-ISC R20.0 SPDF Node-Functionality
(opt for ent,opt for ed) The Range is 0-25 with the default value being 24.
AgcfNodeFunctionality LCP-ISC R20.0 AGCF Node-Functionality
(opt for ent,opt for ed) The Range is 0-25 with the default value being 25
D.104 ngfs-bgcfpaniaccessinfotbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.105 ngfs-bgcfpaniaccessinfo-v2(rtrv,ent,dlt)
Added for LCP-CTS R5.0 and later!
NgfsBgcfPaniAccessInfoAid LCP-CTS R5.0 Aid of BGCF Pani Access Info. Aid has format of
(req for ent,req for ed)
the NgfsBgcdPaniAccessInfoTblAid
`AccessInfoId.AccessInfoId range is 1-10. InfoId 1-5 are
automatically created when the Access Info Table is
created, they can not be changed and can only be deleted
when the table is deleted.
AccessInfo LCP-CTS R5.0 String (1-32)
(req for ent,req for ed)
([a-zA-Z0-9\-\.!%\*_+`'~]+)|([a-zA-Z0-9\-\.!%\*_+`'~]*&)
D.106 ngfs-bgcfpaniaccesstypetbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.107 ngfs-bgcfpaniaccesstype-v2(rtrv,ent,dlt)
Added for LCP-CTS R5.0 and later!
D.108 ngfs-bgcflocalnumberrttbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
NgfsBgcfLocalNumberRtTblAid LCP-CTS R5.0 Aid of BGCF Local Number Routing Table. Range is
(req for ent,req for ed)
0-999, where 0 will auto select the table number.
TableName LCP-CTS R5.0 String (1-19)
(req for ent,req for ed) ([\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&
amp;></_|\\ ]*[\S])
D.109 ngfs-bgcflocalnumberrt-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.110 ngfs-bgcflocalnumdatbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.111 ngfs-bgcflocalnumda-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsBGCFLocalNumDAAid The AID,Format is:
NgfsBgcfLocalNumDaTblAid `DnType`DigitString
NgfsBgcfLocalNumDaTblAid
`DnType`DigitString`Criteria`Value
[0-9]+
\+[0-9]+
\+[0-9]+&
[0-9]*&
Criteria: "CIC" or "CdPN"
Value: Length is 1-12 for CdPN, 1-8 for CIC..
[0-9]+
\+[0-9]+
\+[0-9]+&
LCP-CTS R6.0 From CTS R6.0:
DigitString is a string with length of 1-16 with the
following acceptable regular expressions:
[0-9A-F]+
+[0-9A-F]+
+[0-9A-F]+&
[0-9A-F]*&
LCP-CTS R6.2 From CTS R6.2:
DigitString is a string with length of 1-16 with the
following acceptable regular expressions:
[0-9A-F*#]+
+[0-9A-F*#]+
+[0-9A-F*#]+&
[0-9A-F*#]*&
[0-9A-Fa-fx*#]*[&]*
TodId Integer(1-999) or None
(req for ent,req for ed)
NtwkGwId Integer(1-999) or None
(req for ent,req for ed)
DfltNtwkGwId Integer(1-32) or None
(req for ent,req for ed)
TargetListId Integer(1-9999) or None.
(req for ent,req for ed)
D.112 ngfs-bgcflocationroutetbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.113 ngfs-bgcflocationroute-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
[0-9A-Fx*#]+|\+[0-9A-Fx*#]+|\+[0-9A-Fx*#]*&|[0-9A-Fx*#]*&
NgfsBgcfLocationRouteTblAid`CalledDNPattern`Acces
sTypeId`AccessInfoId`AccessInfoValue
CalledDNPattern:
Length is between 1 and 12.
[0-9x]+|\+[0-9x]+|\+[0-9x]*&|[0-9x]*&
AccessInfoId: range (1 - 10)
AccessInfoValue:
Length is between 0 and 64.
[0-9x]*[&]*
LCP-CTS R7.0 From CTS R7.0:
AccessTypeId: range (1 - 27)
TargetListId LCP-CTS R5.0 Integer(1-9999).
(req for ent,req for ed)
DigitTableId LCP-ISC R20.1 A string representation of the pre-defined IMS Digtit
(opt for ent,opt for ed) table by its table ID.
D.114 ngfs-bgcforigsourceinfotbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.115 ngfs-bgcforigsourceinfo-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
OrigSource (1-128)
If the SourceType is Text String, "&" must be at end
if included in string.
D.116 ngfs-gtasprofile-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.117 ngfs-diameterprofile-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
AltDestinationFQDN^AltDestinationPort^MinActiveConn
^ServerName^ApplicationTimeOut^AutoDNSQuery^
DiaMultiDesProfileId
For example :
Cx^10.21.219.0^11022^^0^50^^5^true^
ApplicationType : Cx
DestinationFQDN : String(1-96)
[a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&></_ ]*
ServerName : String(5-96)
[a-zA-Z0-9\*#\.,\-'!$:()&></=;\ ]* or empty.
diamOverTcp - boolean
diamOverSctp - boolean
sctpParameterProfile - (0-31)
D.118 ngfs-diamultidptbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Integer (1501-1628)
LCP-CTS R7.1.1 Integer 1501-1692 from R22MR1
TableName LCP-CTS R6.2 String (1-19)
(req for ent,req for ed) [\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&a
pos;&></_|\\ ]*[\S]
D.119 ngfs-diamultidprec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Format of
NgfsDiaMultiDPTblAid` FqdnIndex
NgfsDiaMultiDPTblAid:Integer(1501-1628)
FqdnIndex: Integer (1-16)
Default:1501`1
LCP-CTS R7.1.1 NgfsDiaMultiDPTblAid is changed to 1501-1692 from
R22MR1
DestinationFqdn LCP-CTS R6.2 String(1-96)
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]*
D.120 ngfs-phonecontextrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.121 ngfs-phonecontexttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.122 ngfs-phcontextexemptentry-v2(rtrv,ent,dlt)
Added for LCP-CTS R5.0 and later!
D.123 ngfs-phcontextexempttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.124 ngfs-dialedcicvalidatedtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.125 ngfs-dialedcicvalidatedrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
GlobalCarrierId: String,
Length is between 1 and 7. [0-9]*
CICPrefix LCP-CTS R5.0 String, [0-9]*,Length is between 1 and 4.
(req for ent,req for ed)
OwnerByOperator LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
OBRDigitTable LCP-CTS R7.0 0(default), Int(1000-4000)
(opt for ent,opt for ed)
PIC1 LCP-CTS R5.0 Values:
(req for ent,req for ed) o Block User
o Block All
o Allow.
Default value is Allow.
PIC2 LCP-CTS R5.0 Values:
(req for ent,req for ed) o Block User
o Block All
o Allow.
Default value is Allow.
PIC3 LCP-CTS R5.0 Values:
(req for ent,req for ed) o Block User
o Block All
o Allow.
Default value is Allow.
PIC4 LCP-CTS R5.0 Values:
D.126 ngfs-siperrhandlingtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.127 ngfs-siperrhandlingrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.128 ngfs-bgcflocationroute-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
[0-9A-Fx]+|+[0-9A-Fx]+|+[0-9A-Fx]*&|[0-9A-Fx]*&
[0-9A-Fx*#]+|\+[0-9A-Fx*#]+|\+[0-9A-Fx*#]*&|[0-9A-Fx*#]*&
NgfsBgcfLocationRouteTblAid`CalledDNPattern`Acces
sTypeId`AccessInfoId`AccessInfoValue
CalledDNPattern:
Length is between 1 and 12.
[0-9x]+|\+[0-9x]+|\+[0-9x]*&|[0-9x]*&
AccessInfoId: range (1 - 10)
AccessInfoValue:
Length is between 0 and 64.
[0-9x]*[&]*
LCP-CTS R7.0 From CTS R7.0:
AccessTypeId: range (1 - 27)
TargetListId LCP-CTS R5.0 Integer(1-9999).
(req for ent,req for ed)
D.129 ngfs-bgcflocalnumda-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgfsBGCFLocalNumDAAid The AID,Format is:
NgfsBgcfLocalNumDaTblAid `DnType`DigitString
NgfsBgcfLocalNumDaTblAid
`DnType`DigitString`Criteria`Value
[0-9]+
\+[0-9]+
\+[0-9]+&
[0-9]*&
Criteria: "CIC" or "CdPN"
Value: Length is 1-12 for CdPN, 1-8 for CIC..
[0-9]+
\+[0-9]+
\+[0-9]+&
LCP-CTS R6.0 From CTS R6.0:
DigitString is a string with length of 1-16 with the
following acceptable regular expressions:
[0-9A-F]+
+[0-9A-F]+
+[0-9A-F]+&
[0-9A-F]*&
LCP-CTS R6.2 From CTS R6.2:
DigitString is a string with length of 1-16 with the
following acceptable regular expressions:
[0-9A-F*#]+
+[0-9A-F*#]+
+[0-9A-F*#]+&
[0-9A-F*#]*&
[0-9A-Fa-fx*#]*[&]*
TodId Integer(1-999) or None
(req for ent,req for ed)
NtwkGwId Integer(1-999) or None
(req for ent,req for ed)
DfltNtwkGwId Integer(1-32) or None
(req for ent,req for ed)
TargetListId Integer(1-9999) or None.
(req for ent,req for ed)
D.130 ngfs-bgcflocalnumberrt-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.131 ngfs-bgcforigsourceinfotbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.132 ngfs-bgcforigsourceinfo-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
OrigSource (1-128)
If the SourceType is Text String, "&" must be at end
if included in string.
D.133 ngfs-dgcfrtcfparameters-v2(rtrv,ent,ed)
Added for LCP-CTS R7.0 and later! (From ISC R18.1, this table is replaced by a new table
D.134 ngfs-sipmesprooptions-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.135 ngfs-bgcfparameters-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.136 ngfs-globalparameters-v2(rtrv,ed)
Added for LCP-CTS R7.0 and later!
Default: No
supportOfEqualAccess LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enableRegionalZoneSub LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enableSuperCharge LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enableCpi LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
prependNationalPrefix LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
useOnlyLocalMapVersion LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enableCloseUserGroup LCP-CTS R7.0 No
(req for ent,req for ed) Default: No
enableAmrSub LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enable6DigitAmrTac LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
amrUseImeiCap LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
nAlertSupport LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
nAlertTimer LCP-CTS R7.0 Value: 0 to 30
(req for ent,req for ed)
enableWss7LoadBalance LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
enableRanapLoadBalance LCP-CTS R7.1.1 Yes
(req for ent,req for ed) No
Default: No
enableSgsapLoadBalance LCP-CTS R7.1.1 Yes
(req for ent,req for ed) No
Default: No
wss7CpuThreshold LCP-CTS R7.0 Range 50 to 100
(req for ent,req for ed)
emergGmlcAddress LCP-CTS R7.0 Range: string of 0-15 numeric characters.
(req for ent,req for ed)
Default: No
enableMscNumberPresent LCP-CTS R7.0 Yes
(req for ent,req for ed) No
Default: No
switchNumber LCP-CTS R7.0 Range: string of 3 numeric characters.
(req for ent,req for ed) Valid values: 0-9
Default: 000
D.137 ngfs-tmsivlrparameters-v2(rtrv,ed)
Added for LCP-CTS R7.0 and later!
Range: 0 to 10
Default: 0
Nri LCP-CTS R7.0 Specifies the NRI.
(req for ent,req for ed) Range: 0 to 1023
Default: 0
NullNri LCP-CTS R7.0 Specifies the Null NRI.
(req for ent,req for ed) Range: 0 to 1023
Default: 0
Mcc LCP-CTS R7.0 Specifies the Mobile Country Code (MCC).
(req for ent,req for ed)
Range: string of 3 alphanumeric characters or null string
D.138 ngfs-acrchargingprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later! Deprecated from CTS R6.1.
ProfileId: Integer(1-20)
ProfileType LCP-CTS R5.0 Valid value: CSCF, CTS
(opt for ent,opt for ed)
InitialInviteErrorCases LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
InviteDLG LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed)
MessageTransaction LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
NotifyTransaction LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
PublishTransaction LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
ReferDLG LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
RegisterTransaction LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
SubscribeDLG LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Can not be true when ProfileType is CTS
DialCodes LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Only can be set to true when ProfielType is CTS and
InviteDLG is true.
IncompleteCalls LCP-CTS R5.0 Boolean (true or false)
(opt for ent,opt for ed) Only can be set to true when ProfielType is CTS and
InviteDLG is true.
SdpInSipInviteDLG LCP-CTS R5.0 Valid value: Yes, No, MediaLineOnly
(opt for ent,opt for ed)
SpecialAVP LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
Acr3gppReleaseType LCP-CTS R6.0 Valid value:
(opt for ent,opt for ed) o 32.225 Release 5
o 32.260 Release 7
Default 32.225 Release 5
InhibitTerminatingACRs LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
CarrierIdRecFormat LCP-CTS R6.0 Valid value:
(opt for ent,opt for ed) o Pre-Select, No Details
o Global CIC Details
o Local CIC Details
Default Pre-Select, No Details
D.139 ngfs-acrchargingprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R18.1 and later! Deprecated from CTS R6.1.
D.140 ngfs-chargingprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later! CTS Charging Profile
ProfileId: Integer(1-20)
LCP-SCG 7.1 The matching string part of the Aid field now must use
only capital letters in the alpha part.
InviteDLG LCP-CTS R6.1 Boolean (true or false)
(opt for ent,opt for ed)
DialCodes LCP-CTS R6.1 Boolean (true or false)
(opt for ent,opt for ed) Only can be set to true when ProfielType is CTS and
InviteDLG is true.
IncompleteCalls LCP-CTS R6.1 Boolean (true or false)
(opt for ent,opt for ed) Only can be set to true when ProfielType is CTS and
InviteDLG is true.
SdpInSipInviteDLG LCP-CTS R6.1 Valid value: Yes, No, MediaLineOnly
(opt for ent,opt for ed)
D.141 ngfs-chargingprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.142 ngfs-calllocktbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! this command is for call Lock table
D.143 ngfs-calllockrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
D.144 ngfs-dgcfphonecontextlist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.145 ngfs-dgcfphonecontext-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later! Deprecated in LCP-CTS 7.0 in OMC-P R14.3
PhoneContext: String(1-128)
[a-zA-Z0-9\*#+\.,\-'!$()&><%/ ]
D.146 ngfs-dgcfphonecxexemptlist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later! Deprecated in LCP-CTS 7.0 in OMC-P R14.3
D.147 ngfs-dgcfphonecxexemptrec-v2(rtrv,ent,dlt)
Added for LCP-CTS R5.0 and later! Deprecated in LCP-CTS 7.0 in OMC-P R14.3
Format as:
NgfsDGCFPhoneCxExemptListAid`
DialStringPattern
DialStringPattern: String(1-24)
[a-zA-Z0-9;&=+$,?/\-_\.!~\*()"]
D.148 ngfs-calltypeoptionstbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later! Deprecated in LCP-CTS 7.0 in OMC-P R14.3
D.149 ngfs-calltypeoptionsrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
FS:Flexible Assignment 10
FS:Flexible Assignment 11
FS:Flexible Assignment 12
FS:Flexible Assignment 13
FS:Mobile
PIC LCP-CTS R5.0 Valid value:
(req for ent,req for ed) NONE, PIC1, PIC2, PIC3, PIC4
DialedCICTreatment LCP-CTS R7.0 Indicates whether a dialed carrier code is allowed,
(opt for ent,opt for ed) prohibit or ignored for each number type
Valid value:
Allow, Prohibit, Ignore.
Default is Allow.
D.150 ngfs-psisubdomainlist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.151 ngfs-psisubdomainrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.152 ngfs-servicetodiametertbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
PoolId, Integer(0-10)
LCP-CTS R7.1.1 From CTS 7.1.1, "Service Broker" will be removed.
DiameterProfile LCP-CTS R5.0 Integer (1-64)
(req for ent,req for ed)
D.153 ngfs-ocbprogramtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
D.154 ngfs-ocbprogramrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
OcbProgramId: integer(1-255)
Description LCP-CTS R5.0 String(0-50)
(req for ent,req for ed)
OcbWhiteListId LCP-CTS R5.0 Integer(1000-4000)
(req for ent,req for ed)
AllowUserControl LCP-CTS R5.0 Boolean(true or false)
(req for ent,req for ed)
OcbDigitTable LCP-CTS R5.0 OCB Digit Table List Id Entries, separated by
(req for ent,req for ed) space
Maximum 32 entries.
D.155 ngfs-progrdigitstateproc-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R5.0 and later!
RDigitTableIndex, integer(1-10)
State, valid value:
Call Waiting Ringing
Third Party Ringing
Held Far Party Exists
Three Way Conference
DtmfDigit, Integer(0-9)
Action LCP-CTS R5.0 Valid value:
(req for ent,req for ed) For State is Call Waiting Ringing:
Answer call release dialog
Answer call put dialog on hold
Deflect call
Reject call
Answer call join parties into 3-way conference
D.156 ngfs-dbgwglobalsettings-v2(rtrv,ed)
Parameter Name Version Description
NgfsDbgwGlobalSettingsAid Aid of DBGW Global Settings Table.
(req for ent,req for ed)
Always set to 1.
CsdSnfMode Valid value:
(req for ent,req for ed) TAS_SNF_NONE
TAS_SNF_ALU
TAS_SNF_AIMS
DisableCleartextServices Boolean(true or false)
(req for ent,na for ed) Read only
DisableSecureServices Boolean(true or false)
(req for ent,na for ed)
Read only
RequireDuplexSubscribers Boolean(true or false)
(req for ent,na for ed) Read only
D.157 ngfs-localccfparameters-v2(rtrv,ed)
Added for LCP-CTS R6.0 and later! Local CCF Parameters
iAGCF.
IAgcfRecordType LCP-ISC R20.0 This parameter is used by the iCCF to populate the
(na for ent,opt for ed) record type in the CDR record.
IAgcfFileNamePrefix LCP-ISC R20.0 This field is used by the iCCF to add as a prefix to
(na for ent,opt for ed) the existing file name schema.
SpdfNodeFunc LCP-ISC R20.0 This parameter is used by the iCCF to identify the
(na for ent,opt for ed) ACR message is from the
SPDF.
SpdfRecordType LCP-ISC R20.0 This parameter is used by the iCCF to populate the
(na for ent,opt for ed) record type in the CDR record.
SpdfFileNamePrefix LCP-ISC R20.0 This field is used by the iCCF to add as a prefix to
(na for ent,opt for ed) the existing file name schema.
D.158 ngfs-ansi41mapparameters-v2(rtrv,ed)
Added for LCP-SCG 7.0 and later! ANSI-41/MAP Parameters
SystemId LCP-SCG 7.0 Defines the system identity, which is part of the MSC
(na for ent,opt for ed) identity.
SwitchNumber LCP-SCG 7.0 Defines the switch number, which is part of the MSC
(na for ent,opt for ed) identity.
Ansi41 LCP-SCG 7.0 Set to "yes" to allow the MSC to serve an ANSI-41
(na for ent,opt for ed) network configuration. At least one of ANSI-41 and
GSM MAP must be set.
GsmMap LCP-SCG 7.0 Set to "yes" to allow the MSC to serve an GSM MAP
network configuration. At least one of ANSI-41 and
GSM MAP must be set. NOTE: Setting this
configuration option is not supported in the current
version of OMC-P.
LCP-SCG 7.1 Set to "yes" to allow the MSC to serve an GSM MAP
network configuration. At least one of ANSI-41 and
GSM MAP must be set. ANSI-41 and GSM Map can not
be Yes at the same time.
SecondaryHlrQuery LCP-SCG 7.0 Allows the MSC to query the secondary ANSI-41 or
(na for ent,opt for ed) GSM HLR if the dialed number is not found in the primary
ANSI-41 or GSM HLR respectively.
IncludePcssnInAnsi41Message LCP-SCG 7.0 Set whether the Point Code Subsystem Number
(na for ent,opt for ed)
(PCSSN) should be included in messaging, which allows the
serving MSC to use this information to navigate an SS7
network when the need to redirect a call is determined.
CircuitCallsToCdmaRoamers LCP-SCG 7.0 Set whether the user will receive circuit voice mails when
(na for ent,opt for ed)
roaming in the CDMA network.
SetCgpnToB LCP-SCG 7.0 Set to "yes" to activate the Calling Party Pays
(na for ent,opt for ed) service.
SmtMobileTimer LCP-SCG 7.0 Specified in seconds.
(na for ent,opt for ed)
RedirectRequestTimer LCP-SCG 7.0 Specified in seconds.
(na for ent,opt for ed)
CallForwardNoAnswerTimer LCP-SCG 7.0 Specified in seconds.
(na for ent,opt for ed)
D.159 ngfs-wifiimsparameters-v2(rtrv,ed)
Added for LCP-CTS R7.1 and later! WiFI/IMS Parameters
HoasChannelGroup LCP-SCG 7.1 Channel Group HOAS uses for the digit table and route
(na for ent,na for ed) table information. Default: None
Not Modifiable.
MobileCountryCode LCP-SCG 7.1 Country to which a PLMN belongs.
(na for ent,na for ed) Values: 000-999
Default: 000
Not Modifiable.
MobileNetworkCode LCP-SCG 7.1 Identifies a PLMN within a country.
(na for ent,na for ed) Values: 000-999
Default: 000
Not Modifiable.
LocationAreaCode LCP-SCG 7.1 Defines a location area within a PLMN. Used with
(na for ent,na for ed) CAMEL interaction with SCF.
D.160 ngfs-sccpparameters-v2(rtrv,ed)
Added for LCP-SCG 7.0 and later! SCCP Parameters
D.161 ngfs-ntmcontroltable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.162 ngfs-ntmcontrolrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
IpAddressType`Netmask`MatchingString
Id`RequestMethod`MatchOn`MatchType`MatchingString
PhoneContxtType`PhoneContext`MatchingString
D.163 ngfs-ntmexemptiontable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.164 ngfs-ntmexemptionrecord-v2(rtrv,ent,dlt)
Added for LCP-CTS R6.0 and later!
MatchingString
IpAddressType`Netmask`MatchingString
Id`RequestMethod`MatchOn`MatchType`MatchingString
PhoneContxtType`PhoneContext`MatchingString
D.165 ngfs-agcfdialplantable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.166 ngfs-agcfdialplanrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.167 ngfs-agcfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
String (0-20)
[\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&a
pos;&></_|\\ ]*[\S]
D.168 ngfs-agcfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
default 60
HeartbeatFailureThreshold LCP-CTS R6.2.1 1 - 6, or empty
(opt for ent,opt for ed)
default 1
RegControlTimer LCP-CTS R6.2.1 1 - 360 seconds, or empty
(opt for ent,opt for ed) default 180
RegRetryInterval LCP-CTS R6.2.1 1-60 minutes
(opt for ent,opt for ed) default 3
CallWaitingTimer LCP-CTS R7.0 integer
(opt for ent,opt for ed) - range: 30-180
- default value: 90
The pretty name of the field is "iAGCF Call Waiting
Timer". It specifies the amount of time call waiting can
exist before it is cleared. Its value is in seconds.
Default: Null
RequestRejectResponse LCP-ISC R20.1 Range: Tone, Announcement
(opt for ent,opt for ed) Default: Tone
Spare1 LCP-ISC R20.1 Range: Yes or No
(opt for ent,opt for ed) Default:No
Spare2 LCP-ISC R20.1 Range: 0-4294967295
(opt for ent,opt for ed) Default: 0
Spare3 LCP-ISC R20.1 Range: 0-4294967295
(opt for ent,opt for ed) Default: 0
Spare4 LCP-ISC R20.1 Range: 0-4294967295
(opt for ent,opt for ed) Default: 0
IoiParaEnabled LCP-CTS R7.1.1 Boolean (true or false) default false
(opt for ent,opt for ed)
EnableSendingPstnXml LCP-ISC R20.1 Enable Sending PSTN XML
(opt for ent,opt for ed) This configuration field is provided per iAGCF to
specify if the PSTN-XML shall be included in SIP
messages initiated by the iAGCF for mapping specific
ISDN IEs to the SIP interface. Enable means the
PSTN-XML shall be included. Disable means the
PSTN-XML shall not be included.
D.169 ngfs-agcfdigitmaptable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
String (0-20)
[S]|[S][a-zA-Z0-9*#.,-+'~`!@$%^:;=(){}[]?"'&am
p;></_|\ ]*[S]
D.170 ngfs-agcfdigitmaprecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.171 ngfs-agcfgwvarianttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
String (0-20)
[\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&a
pos;&></_|\\ ]*[\S]
D.172 ngfs-agcfgwvariantrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
Default 8
MaxContexts LCP-CTS R6.0 Long (1-4294967295)
(opt for ent,opt for ed) Default 512
MaxHBTimerRetrans LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 4
MaxInactiveTime LCP-CTS R6.0 Integer (0-65530)
(opt for ent,opt for ed) Default 1000
MaxRetransmissions LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 2
MaxTermsPerCtxt LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 2
MediaNegotSupported LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
NumTermsToAuditPerTrans LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 5
TransPendingRetransTimer LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 1500
UseTDMSubPrefix LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
RequestBearerStat LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
UseNewPortForT38Fax LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
Spare1 LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
Spare2 LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 0
Spare3 LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 0
Spare4 LCP-CTS R6.0 Long (0-4294967295)
(opt for ent,opt for ed) Default 0
DownLoadDigitMap LCP-CTS R7.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
VMWIH4283 LCP-ISC R20.1 Boolean (true or false)
(opt for ent,opt for ed) Default false
Spare5 LCP-CTS R7.1 Long int default 0
(opt for ent,opt for ed)
Spare6 LCP-CTS R7.1 Long int default 0
(opt for ent,opt for ed)
Spare7 LCP-CTS R7.1 Long int default 0
(opt for ent,opt for ed)
Spare8 LCP-CTS R7.1 Long int default 0
(opt for ent,opt for ed)
Spare9 LCP-CTS R7.1 Long int default 0
(opt for ent,opt for ed)
Spare10 LCP-CTS R7.1 Long int default 0
D.173 ngfs-agcfgatewaytable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
String (0-20)
[\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&a
pos;&></_|\\ ]*[\S]
D.174 ngfs-agcfgatewayrecord-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
NgcfAgcfGatewayRecordAid Format as GatewayTableId`GatewayRecordId
(opt for ent,req for ed)
GatewayRecordId (2048-4047)
TableId Same value as the aid of Agcf Gateway Table, Integer
(req for ent,req for ed) (1-99)
GwId Integer (2048-4047).
(req for ent,req for ed) Default 2048
AgcfSipIaPort String (1-71)
(req for ent,opt for ed)
ConnectionType Valid value:
(opt for ent,opt for ed) o UDP/IP
o TCP/IP
Default UDP/IP
ContextAudits Valid value:
(opt for ent,opt for ed) o None
o Audit Value Based
Default Audit Value Based
GwDigitMapId Integer (1-5)
(req for ent,opt for ed)
EnableChannelStatusAudits Boolean (true or false)
(opt for ent,opt for ed)
Default false
GwUserId String (1-28)
(opt for ent,opt for ed)
GwDomain String (1-255)
(req for ent,opt for ed)
GwName String (1-32)
(req for ent,opt for ed)
GwPrivId String(1-100)
(req for ent,opt for ed)
IP1 Format as:
(req for ent,opt for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
Default 0.0.0.0
IP2 Format as:
Default 0.0.0.0
LocalTermTypePrefix String (1-32)
Default AL
LCP-CTS R6.2 Deprecated in CTS 6.2 and later:
LocalTermTypeAnalogPrefix LCP-CTS R6.2 String (1-32)
(opt for ent,opt for ed)
Default:AL
replaces LocalTermTypePrefix
IsLocalTermTypeTDMAnalog Boolean (true or false)
(opt for ent,opt for ed) Default true
NetTermTypePrefix String (1-32)
(opt for ent,opt for ed) Default RTP/
IsNetTermTypeRTPUDP Boolean (true or false) default true
(opt for ent,opt for ed)
PhysicalTermIdScheme LCP-CTS R6.0 Valid value:CTS 6.0 and beyond:
a. al/dslam/rack/shelf/slot/port
b. al/rack/shelf/slot/port
c. al/shelf/slot/port
Default al/dslam/rack/shelf/slot/port
LCP-CTS R6.1 CTS 6.1 addition
d. Flat Term ID
LCP-CTS R6.2 Deprecated values in CTS 6.2 and later:
al/dslam/rack/shelf/slot/port
al/rack/shelf/slot/port al/shelf/slot/port
prefix/rack/shelf/slot/port[/channel]
prefix/shelf/slot/port[/channel]
SendCompactMessages Boolean (true or false)
(opt for ent,opt for ed) Default false
SendEphemeralPrefix Boolean (true or false)
(opt for ent,opt for ed) Default false
UdpPort Default 2944
(opt for ent,opt for ed)
GwVariantId Integer (1-17)
(req for ent,opt for ed)
ComfortNoise LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
Dtmf LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
FaxEvents LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
Type: Audio
CodecAlgType: valid value: G.711 - aLaw, G.711 -
uLaw. default G.711 - uLaw
G.723: 30 to 60 in increments of 30
G.729: 10 to 60 in increments of 10
String (1-10)
Default: BA
AuditAllActiveIsdnCalls LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
MateSite LCP-CTS R6.1 A value of 0 indicates that the GW is not geo-redundant.
(opt for ent,opt for ed) Otherwise, the GW is considered Geo-Redundant and all
the HW data including HSS data will be provisioned on
primary and protection switches. The Id given here should
be that of the switch (2-8) as seen under the alternate
switch's protection site list.
MateExternalIPAddr LCP-CTS R6.1 Default IPv4 external address of the AGCF card on
(opt for ent,opt for ed) the alternate switch. So, on the Primary, it will be the
Protection Switch's AGCF Card IP address. And on
the Protection, it will be the Primary Switch's AGCF
Card IP address.
IsPrimary LCP-CTS R6.1 True indicates to the switch that it is designated as the
(opt for ent,opt for ed) primary in the geo-redundancy mode. False otherwise.
AddtionalDigitMapList LCP-CTS R7.1 Digit Map Table id list. Format as
(opt for ent,opt for ed) tableid1^tableid2^...
D.175 ngfs-agcfgwcombinedrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later! The ngfs-agcfgwcombinedrec is a composite of the following groups. Each
group is further defined in the subsections below. GwId is a unique identifier for a AGCF Gateway Combined
Record. AgcfGatewayRecord HSSPrivateId HSSPrset
D.175.1 AgcfGatewayRecord(rtrv,ent,ed,dlt)
Parameter Name Value Range Description
NgcfAgcfGatewayRecordAid Format as GatewayTableId`GatewayRecordId
(opt for ent,req for ed)
GatewayRecordId (2048-4047)
TableId Same value as the aid of Agcf Gateway Table, Integer
(req for ent,req for ed) (1-99)
GwId Integer (2048-4047).
(req for ent,req for ed) Default 2048
AgcfSipIaPort String (1-71)
(req for ent,opt for ed)
ConnectionType Valid value:
(opt for ent,opt for ed) o UDP/IP
o TCP/IP
Default UDP/IP
ContextAudits Valid value:
(opt for ent,opt for ed) o None
o Audit Value Based
Default Audit Value Based
GwDigitMapId Integer (1-5)
(req for ent,opt for ed)
EnableChannelStatusAudits Boolean (true or false)
(opt for ent,opt for ed)
Default false
GwUserId String (1-28)
(opt for ent,opt for ed)
GwDomain String (1-255)
(req for ent,opt for ed)
GwName String (1-32)
(req for ent,opt for ed)
GwPrivId String(1-100)
(req for ent,opt for ed)
IP1 Format as:
(req for ent,opt for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
Default 0.0.0.0
IP2 Format as:
(opt for ent,opt for ed) ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){3}((25[0-5
])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
Default 0.0.0.0
LocalTermTypePrefix String (1-32)
Default AL
LCP-CTS R6.2 Deprecated in CTS 6.2 and later:
LocalTermTypeAnalogPrefix LCP-CTS R6.2 String (1-32)
(opt for ent,opt for ed)
Default:AL
replaces LocalTermTypePrefix
IsLocalTermTypeTDMAnalog Boolean (true or false)
(opt for ent,opt for ed) Default true
NetTermTypePrefix String (1-32)
(opt for ent,opt for ed) Default RTP/
IsNetTermTypeRTPUDP Boolean (true or false) default true
(opt for ent,opt for ed)
PhysicalTermIdScheme LCP-CTS R6.0 Valid value:CTS 6.0 and beyond:
a. al/dslam/rack/shelf/slot/port
b. al/rack/shelf/slot/port
c. al/shelf/slot/port
Default al/dslam/rack/shelf/slot/port
LCP-CTS R6.1 CTS 6.1 addition
d. Flat Term ID
LCP-CTS R6.2 Deprecated values in CTS 6.2 and later:
al/dslam/rack/shelf/slot/port
al/rack/shelf/slot/port al/shelf/slot/port
prefix/rack/shelf/slot/port[/channel]
prefix/shelf/slot/port[/channel]
SendCompactMessages Boolean (true or false)
(opt for ent,opt for ed) Default false
SendEphemeralPrefix Boolean (true or false)
(opt for ent,opt for ed) Default false
UdpPort Default 2944
(opt for ent,opt for ed)
GwVariantId Integer (1-17)
(req for ent,opt for ed)
ComfortNoise LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
Dtmf LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
FaxEvents LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
ModemEvents LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
TextTelephonyEvents LCP-ISC R20.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
AllCodecDataStr LCP-CTS R6.2 Format as
Type|CodecAlgType|PayloadSize|SilenceSupression
Type: Audio
CodecAlgType: valid value: G.711 - aLaw, G.711 -
uLaw. default G.711 - uLaw
G.723: 30 to 60 in increments of 30
G.729: 10 to 60 in increments of 10
String (1-10)
Default: BA
AuditAllActiveIsdnCalls LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
MateSite LCP-CTS R6.1 A value of 0 indicates that the GW is not geo-redundant.
(opt for ent,opt for ed) Otherwise, the GW is considered Geo-Redundant and all
the HW data including HSS data will be provisioned on
primary and protection switches. The Id given here should
be that of the switch (2-8) as seen under the alternate
switch's protection site list.
MateExternalIPAddr LCP-CTS R6.1 Default IPv4 external address of the AGCF card on
(opt for ent,opt for ed) the alternate switch. So, on the Primary, it will be the
Protection Switch's AGCF Card IP address. And on
the Protection, it will be the Primary Switch's AGCF
Card IP address.
IsPrimary LCP-CTS R6.1 True indicates to the switch that it is designated as the
(opt for ent,opt for ed) primary in the geo-redundancy mode. False otherwise.
AddtionalDigitMapList LCP-CTS R7.1 Digit Map Table id list. Format as
(opt for ent,opt for ed) tableid1^tableid2^...
D.175.2 HSSPrivateId(rtrv,ent,ed,dlt)
New format for OMC-P R13.0 and later:
Default 0
PridUser LCP-CTS R6.0 Private ID user name. Required for ent, optional for
(req for ent,req for ed) ed.
String (1-32)
[0-9a-zA-Z+:@&=!,-_.!~*'()%]*
PrsetNumber LCP-CTS R6.0 Same as aid of HSS Permanent Registration Set
(req for ent,req for ed)
Integer (0-65535)
Default:0
ServerCapNumber LCP-CTS R6.0 Integer (0-65535)
(req for ent,req for ed) Default:0
ProtectionGroupNumber LCP-CTS R6.1 The protection group number for this private id (used when
(opt for ent,opt for ed) the private id is geo-redundant).
Default:0
ChargeInfoNum LCP-CTS R6.2.1 Integer (0-255)
(opt for ent,opt for ed) Default:0
Zero implies the subscriber has no charge info.
MediaProfileId LCP-CTS R6.2.1 Integer (0-999)
(opt for ent,opt for ed) Default:0
Zero implies the subscriber has no media profile
PuidUserList LCP-CTS R6.0 ArrayList for HSSPublicId
(opt for ent,opt for ed)
D.175.3 HSSPrset(rtrv,ent,ed,dlt)
Parameter Name Value Range Description
PrsetNum Aid of HSS Permanent Registration Set
(req for ent,req for ed) Integer (0-65535)
PridUser String (0-32)
(req for ent,opt for ed) [
a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"'&>
;</_|\\ ]*
D.176 ngfs-enumprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.177 ngfs-enumprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
ProfileId, Integer(1-5)
BypassENUMQuery LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default true
QueryAllDomains LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
QueryWhenDigits LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
QueryWhenHexDigits LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
SupportHexDigits LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed) Default false
BypassENUMQueryForLocalNum LCP-CTS R6.2.1 Boolean (true or false)
(opt for ent,opt for ed)
Default true
BypassENUMQueryIfNpdiPresent LCP-CTS R6.2.1 Boolean (true or false)
(opt for ent,opt for ed)
Default false
D.178 ngfs-ibcfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.179 ngfs-ibcfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Default: Null
D.180 ngfs-icscfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.181 ngfs-icscfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Default: Null
D.182 ngfs-scscfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.183 ngfs-scscfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Default:true
SupportDiversionForAsOrig LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed)
Default:false
NextHopForBxOriginations LCP-CTS R6.2 String (0-255)
(opt for ent,opt for ed)
RouteReqToUnregUser LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
RouteAdaptationForPbx LCP-CTS R6.2 None, Loose-Route
(opt for ent,opt for ed) Default: Loose-Route
RuriAdaptationForPbx LCP-CTS R6.2 None, SIP URI
(opt for ent,opt for ed) Default: SIP URI
ActionForRedirectionResp LCP-CTS R6.2 Evaluate-Route, Route-Direct, Proxy
(opt for ent,opt for ed) Default:Proxy
SendPservUsrHdr LCP-ISC R18.1 Send P-Served-User Header to BGCF.
(opt for ent,opt for ed) Boolean (true or false)
Default: false
SupportForGruu LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
AllowInitSipSubscribedIcsi LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed)
Default:false
AllowModSipDlgAlignIcsi LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
SearchInitSipWithoutIcsi LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
SipDigest LCP-ISC R20.1 Boolean (true or false)
(opt for ent,opt for ed) Default:false.
Cross-check: SIP Digest is mutually exclusive with
Digest-MD5-A1,
Digest-MD5-password, or Digest.
RegisterWithoutAuthHeader LCP-ISC R20.1 Valid value is {Derive-PrID, Challenge}. Default:
(opt for ent,opt for ed)
Derive PrID.
or NASS-Bundle is checked.
SupportAuthInfo LCP-ISC R20.1 Boolean (true or false)
(opt for ent,opt for ed) Default:false.
Cross Check: This field is only applicable when SIP
Digest is provisioned as
Format as
sipRequest1^^percentOfRequestChallenged`sipRequest2^^pe
rcentOfRequestChallenged`...
D.184 ngfs-commonpcscfprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.185 ngfs-commonpcscfprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.186 ngfs-pcscfprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.187 ngfs-pcscfprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later! PCSCF Profile Record
Default:0
LCP-ISC R20.0 ISC 20.0 and later,
Integer 0-256
SipStackTimerProfileId LCP-CTS R6.2 Integer 0-15; Profile Id of Sip Stack Timer
(opt for ent,opt for ed) Profile
Default:0
SipTopologyHiding LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
Default:ADSL
LCP-CTS R7.0 ADSL, ADSL2, ADSL2+, G.SHDSL, HDSL,
HDSL2, IDSL, RADSL, SDSL, VDSL,
IEEE-802.11, IEEE-802.11a, IEEE-802.11b,
IEEE-802.11g, 3GPP-GERAN,
3GPP-UTRAN-FDD, 3GPP-UTRAN-TDD, 3GPP2-1X,
3GPP2-1X-HRPD, DOCSIS, 3GPP-E-UTRAN-FDD,
3GPP-E-UTRAN-TDD
Default:ADSL
ServiceBasedLocalPolicy LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
SblpProfileId LCP-CTS R6.2 Integer 0-15; Profile Id of SBLP Profile
Default:0
LCP-ISC R20.1 Integer 0-48; Profile Id of SBLP Profile
SymmetricTcpConnection LCP-CTS R6.2 Off, FW-NAT or SIP Outbound, Always
(opt for ent,opt for ed) Default:Off
SupportOnlyIpsecCapable LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
SaLifetimeShortened LCP-CTS R6.2 Integer 1-600
(opt for ent,opt for ed) Default:100
SecureServerPort LCP-CTS R6.2 Integer 6000-6100,0,Null
(opt for ent,opt for ed) Default:6000
SecureClientPort1 LCP-CTS R6.2 Integer 6000-6100,0,Null
(opt for ent,opt for ed) Default:6001
SecureClientPort2 LCP-CTS R6.2 Integer 6000-6100,0,Null
(opt for ent,opt for ed) Default:6002
Default:0
LCP-ISC R20.1 Integer 0-600; SIP Filter Set Id of filter set
Default:0
Default:0
LCP-ISC R20.1 Integer 0-2048; Security Gateway Profile Id
Default:0
PublishedRealm LCP-CTS R6.2 Integer 1-1024,None
Default:None
LCP-ISC R20.1 Integer 1-2048,None
Default:None
ProvidePcscfIpToUe LCP-CTS R6.2.1 Boolean (true or false)
(opt for ent,opt for ed) Default:false
EnableIpAssociation LCP-CTS R7.0 Boolean (true or false)
(opt for ent,opt for ed) Default:false
PopPaidWhenHdr LCP-CTS R7.0 Either "Use From" or "Use Default"
(opt for ent,opt for ed) Default: "Use Default"
IpAssocSrcGran LCP-CTS R7.0 Either "IP Address and Port"
(opt for ent,opt for ed) or "IP Address"
CountryCode LCP-ISC R20.1 integer 0 ~ 9, length 0~3
(opt for ent,opt for ed) default: null
AreaCode LCP-ISC R20.1 integer 0 ~ 9, length 0~4
(opt for ent,opt for ed) default: null
SBCDomainName LCP-ISC R20.1 string 0-100 with a-zA-Z0-9.-
(opt for ent,opt for ed) default null
CanmUri LCP-ISC R20.1 String(0 - 255). Format is <CanmPortName.LocalZone>.
(opt for ent,opt for ed) CANM Port Name on the SIPia Port (canm-xxxx where
xxxx is filled in by the user) and the Local Zone from
the NGSS Parameters and Timers.
Default: Null
D.188 ngfs-sipfiltertable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
[\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&a
pos;&<>/_|\\ ]*[\S]
D.189 ngfs-sipfilterrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.190 ngfs-sipfilterheadertable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.191 ngfs-sipfilterheaderrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
FilterId:Integer 1-500
LCP-ISC R20.1 Aid of Sip FilterHeader Record.
TableId`FilterId`HeaderId
FilterId:Integer 1-2000
Description LCP-CTS R6.2 String (0-32)
(opt for ent,opt for ed)
Form LCP-CTS R6.2 Request Uri, Header, Body
Default: Request Uri
LCP-CTS R7.0 Request Uri, Header, Body, Response Code
HeaderName LCP-CTS R6.2 String (0-50)
(opt for ent,opt for ed)
RegularExpressions LCP-CTS R6.2 String (0-256)
(opt for ent,opt for ed)
BooleanConditions LCP-CTS R6.2 String (0-40)
(opt for ent,opt for ed)
MaxContentLength LCP-CTS R6.2 Integer 0-25000000 or Null
(opt for ent,opt for ed)
ResponseCode LCP-CTS R6.2 3 digits, [1-6][0-9Xx][0-9Xx] or Null or [Aa][Ll][Ll]
(opt for ent,opt for ed)
ReasonPhrase LCP-CTS R6.2 String (0-64)
(opt for ent,opt for ed)
Action LCP-CTS R6.2 No Action, Discard, Reject, Modify, Add, Remove,
(opt for ent,opt for ed) Save
Default:No Action
Occurrence LCP-CTS R6.2 Integer 1-10, All
(opt for ent,opt for ed) Default:1
D.192 ngfs-sipfilterbodytable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! Sip Filter Body Rule Table
D.193 ngfs-sipfilterbodyrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! Sip Filter Body Rule Record
D.194 ngfs-sipfilterreftable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! Sip Filter Reference Rule Table
D.195 ngfs-sipfilterrefrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! Sip Filter Reference Rule Record
D.196 ngfs-sipfilterparamtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.197 ngfs-sipfilterparamrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
FilterId:Integer 1-500
LCP-ISC R20.1 Aid of Sip Filter Parameter Rule Record.
TableId`FilterId`HeaderId`Parameter Id
FilterId:Integer 1-2000
Description LCP-CTS R6.2 String (0-32)
(opt for ent,opt for ed)
ParameterType LCP-CTS R6.2 None, User, URI, Header
(opt for ent,opt for ed) Default:None
ParameterString LCP-CTS R6.2 String (0-30)
(opt for ent,opt for ed)
RegularExpression LCP-CTS R6.2 String (0-256)
(opt for ent,opt for ed)
BooleanCondition LCP-CTS R6.2 String (0-40)
(opt for ent,opt for ed)
Action LCP-CTS R6.2 No Action, Add, Remove,Modify,Save
(opt for ent,opt for ed) Default:No Action
NewParameterType LCP-CTS R6.2 None, User, URI, Header
(opt for ent,opt for ed) Default:None
D.198 ngfs-sipfiltersettable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.199 ngfs-sipfiltersetrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.200 ngfs-iscchargingprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later! NOTE: This command is used for IMS ACR Charging Profile Table
D.201 ngfs-iscchargingprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later! NOTE: This command is used for IMS ACR Charging Profile Record
^notifyTransaction^publishTransaction^
messageTransaction^initialInviteErrorCases^
sdpInSipInviteDlg^
initialInviteErrorCases, subscriberDlgForRegEvent,
notifyTransactionForRegEvent, reinviteWithoutSdpCases,
updateWithoutSdpCases, inviteDlgForEmergencyCalls
Boolean (true of false),default false
specialAVPforAccessNet^
sipFraction, Boolean (true or false),
default false
genPropietaryAVP, Boolean (true or false), default
false
D.202 ngfs-dgcfprefixdatable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.203 ngfs-dgcfprefixdarecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.204 ngfs-iaportdeviceservice-v2(rtrv)
Added for LCP-CTS R6.2.1 and later! Support of Device Server Type
ExternalIPx: format as
Nitype^^SubnetType^^IpAddress^^Label^^SubnetName
Nitype:
valid value: Default, PDF, Cx/Diameter,
Sh/Diameter, Rf/Diameter, Ro/Diameter, Published, Web
Portal, Sig Network 1, Sig Network 2, Unassigned
SubnetType:
valid vaue: EX-V4, EX-V6
LCP-CTS R7.0 From this version, this field includes both internal and
external floating IPs. The format is as
InternalIP1`InternalIP2`......followed by
ExternalIP1'ExternalIP2'....
Nitype:
valid value: Default, PDF, Cx/Diameter,
Sh/Diameter, Rf/Diameter, Ro/Diameter, Published, Web
Portal, Sig Network 1, Sig Network 2, E2/Diameter,
Gqp/Diameter, Rx/Diameter,/Tx/Diameter,
Gls/Diameter,Unassigned
SubnetType:
valid vaue: EX-V4, EX-V6
FephEnabled LCP-CTS R7.0.1 Boolean (true or false)
(req for ent,req for ed)
D.205 ngfs-sipiaport-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
o Locked
PortNum LCP-CTS R6.0 Integer (1-65535) default 5060
(opt for ent,opt for ed)
PortProfile LCP-CTS R6.0 Integer Default 0
LCP-ISC R20.1 Integer(0-65535) - some SIPia Port types may support a
small range of the profile ID.
Default 0
ShuttingDownTrmt LCP-CTS R6.0 Valid value:
(opt for ent,opt for ed) o Reject with 503
OverloadTrmt LCP-CTS R6.0 Valid value:
(opt for ent,opt for ed) o Reject with 500
RetryAfter LCP-CTS R6.0 Integer (0-999)
(opt for ent,opt for ed)
WaitTime LCP-CTS R6.0 Integer (0-999)
(opt for ent,opt for ed)
MemberOfExtGULGrp LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed)
ACRMsgGeneration LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed)
CommonProfile LCP-CTS R6.0 Integer
(opt for ent,opt for ed)
AllowImmediate200OK LCP-CTS R6.0 Boolean (true or false)
(opt for ent,opt for ed)
NtmCCTableId LCP-CTS R6.0 Integer (0-9)
Can be modified only when PortType is PCSF,
ICSF, and BGCF
D.206 ngfs-siplinksettable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.207 ngfs-siplinksetrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
UriID:Integer (0-65534)
DNS LCP-CTS R6.2 Boolean (true or false)
(opt for ent,na for ed) Default:false
Default:Default
NI2 LCP-CTS R6.2 String: None, SIGNTWRK1, SIGNTWRK2
(opt for ent,opt for ed) Default:None
DestinationFQDN LCP-CTS R6.2 String (2-256)
(opt for ent,opt for ed)
DestPort LCP-CTS R6.2 Integer
(opt for ent,opt for ed) Default:5060
DestIP1 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP2 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP3 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP4 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP5 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP6 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP7 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP8 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP9 LCP-CTS R6.2 String (0-45)
(opt for ent,opt for ed) [a-fA-F0-9:.]*
DestIP10 LCP-CTS R6.2 String (0-45)
D.208 ngfs-sipdesttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.209 ngfs-sipdestrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.210 ngfs-sippmtlkstgrptable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.211 ngfs-sippmtlkstgrprecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.212 ngfs-siptrustedrulesettbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.213 ngfs-siptrustedrulesetrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
SipMessages LCP-CTS R6.2.1 Space separated list of SIP Methods, where each method
(opt for ent,opt for ed) can be one of the following values: ACK, BYE,
CANCEL, INFO, INVITE, MESSAGE,
NOTIFY, OPTIONS, PRACK, PUBLISH,
REFER, REGISTER, SUBSCRIBE, UPDATE,
1xx, 2xx, 3xx, 4xx, 5xx, 6xx, ALL-REQUEST,
ALL-RESPONSE, UNKNOWN-REQUEST,
D.214 ngfs-sipuntrustedrulesettbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.215 ngfs-sipuntrustedrulesetrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
SipMessages LCP-CTS R6.2.1 Space separated list of SIP Methods, where each method
(opt for ent,opt for ed) can be one of the following values: ACK, BYE,
CANCEL, INFO, INVITE, MESSAGE,
NOTIFY, OPTIONS, PRACK, PUBLISH,
REFER, REGISTER, SUBSCRIBE, UPDATE,
1xx, 2xx, 3xx, 4xx, 5xx, 6xx, ALL-REQUEST,
ALL-RESPONSE, UNKNOWN-REQUEST,
D.216 ngfs-sourceaddrpolicytbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.217 ngfs-sourceaddrpolicyrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.218 ngfs-sipaggtrusrulesettbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
D.219 ngfs-sipaggtrusrulesetrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
D.220 ngfs-sipagguntrusrulesettbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! ngfs-sipagguntrusrulesettbl-v2
D.221 ngfs-sipagguntrusrulesetrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
D.222 ngfs-aggsrcaddrpolicytbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
quot;'&<>/_|\\ ]*[\S]
D.223 ngfs-aggsrcaddrpolicyrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later!
D.224 ngfs-securitygwprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.225 ngfs-securitygwprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.226 ngfs-sblpprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.227 ngfs-sblpprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.228 ngfs-sctpprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
(req for ent,req for ed) Integer(1-100), where the minimum available number will be
auto selected.
D.229 ngfs-sctpprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Default:1500
SCTPNoDelay LCP-CTS R6.2 Boolean (true or false)
(opt for ent,opt for ed) Default:false
DataChunkBundling LCP-CTS R6.2 Integer: 0-1000
(opt for ent,opt for ed) Default:40
It is in imcrements of 10ms.
AssocMaxRetrans LCP-CTS R6.2 Integer: 2-40
(opt for ent,opt for ed) Default:10
PathMaxRetrans LCP-CTS R6.2 Integer: 1-20
(opt for ent,opt for ed) Default:5
MaxInitRetrans LCP-CTS R6.2 Integer: 1-15
(opt for ent,opt for ed) Default:8
SctpDeliveryMode LCP-ISC R20.1 Enumeration: [Ordered, Unordered]
(opt for ent,opt for ed) Default: Unordered
SCTP Delivery Mode
NumOfOutboundSctpStreams LCP-ISC R20.1 Integer: 1-65535
(opt for ent,opt for ed) Default: 16
The number of outbound SCTP streams to be requested
at SCTP association start up.
MaxNumOfInboundSctpStreams LCP-ISC R20.1 Integer: 1-65535
(opt for ent,opt for ed)
Default: 16
The maximum number of inbound SCTP streams the
LCP SCTP endpoint allows.
D.230 ngfs-agcfdslamtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.231 ngfs-pnaptrtargeturi-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.232 ngfs-pnaptrregion-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
[a-z0-9*#.,-+'!$@:=(){}[]?&><%/_ ]*
ServiceType
PnaptrUriId, interge (1-999), the id of one
P-NAPTR Target Uri.
D.233 ngfs-homedomain-v2(rtrv,ent,dlt)
Added for LCP-CTS R6.0 and later!
[a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]*
D.234 ngfs-agcfendpoint-v2(rtrv,ent,ed,dlt)
Parameter Name Version Description
PrividUser Aid of AGCF Endpoint, same value of PrimaryPUID
(req for ent,req for ed)
String (0-32)
[+0-9a-zA-Z:,\-_\.'()]*
Slot Integer (1-99)
(opt for ent,na for ed)
Port Integer (1-99)
(opt for ent,na for ed)
GwId Integer (2048-4047)
(req for ent,na for ed)
Dn String (0-32)
Slot: 0
Port: 0
DslamId : null
Rack: -1
Shelf: 0
Default: NO_POLARITY_REVERSAL
PayphoneMetering LCP-CTS R7.1 enum: PAYPHONE_REVERSE_POLARITY,
(opt for ent,opt for ed) PAYPHONE_PULSE_METERING_16_KHZ
default: PAYPHONE_PULSE_METERING_16_KHZ
DigitMap1st LCP-CTS R7.1 Integer: 0-64
(opt for ent,opt for ed)
DigitMap2nd LCP-CTS R7.1 Integer: 0-64
(opt for ent,opt for ed)
DialTone2nd LCP-CTS R7.1 Integer: 0-128
(opt for ent,opt for ed)
D.235 ngfs-emergencyurilist-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
D.236 ngfs-emergencyurirecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.0 and later!
UriId, Integer(1-16)
UriStr LCP-CTS R6.0 String (1-129)
(req for ent,req for ed) [a-zA-Z0-9\*#\.,\-+'!$@:=(){}\[\]?&><%/_ ]*
D.237 ngfs-crfactivaterec-v2(rtrv,ent,dlt)
Added for LCP-CTS R6.1 and later!
D.238 ngfs-crfactivatetbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.239 ngfs-crfcalldestinationrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.240 ngfs-crfcalldestinationtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.241 ngfs-crfcalltyperec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
FS:Flexible Assignment 1
FS:Flexible Assignment 2
FS:Flexible Assignment 3
FS:Invalid Destination
FS:Call Type A
FS:Call Type B
FS:Not Applicable
CarrierCallType:
FS:Carrier Prefixed
FS:Feature Group B Carrier
FS:IDDD Carrier
FS:No Carrier
FS:No Dialed Carrier
FS:Call Type A
FS:Call Type B
FS:Not Applicable
OperatorCallType:
FS:Operator (Local)
FS:Operator (Long Distance)
FS:Operator (International)
FS:International Operator Assist
FS:Not Applicable
CallTypeId LCP-CTS R6.1 Integer (1-800)
(req for ent,req for ed)
D.242 ngfs-crfcalltypetable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.243 ngfs-crfcallerratecategrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.244 ngfs-crfcallerratecategtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.245 ngfs-crfdayprogramrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later!
D.246 ngfs-crfdayprogramtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.247 ngfs-crfraterecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.248 ngfs-crfratetable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.249 ngfs-crftariffprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
<ExceptionList>1970-01-02^1^|1971-02-02^1^|</ExceptionList>
D.250 ngfs-crftariffprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.251 ngfs-crftariffselectionrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.252 ngfs-crftariffselectiontbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.1 and later!
D.253 ngfs-ngngetsidlisttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.254 ngfs-ngngetsidlistrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
GETSIdentifierId, Integer(1-15)
GETSIdentifier LCP-CTS R6.2 String of 3-10 Digits
(req for ent,req for ed) (Digits allowed 0 - 9)
D.255 ngfs-bgcforighostidtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
Integer (0-999)
Default:1
0 means that will auto select the table number.
D.256 ngfs-bgcforighostidentify-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2 and later!
D.257 ngfs-ecscfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.258 ngfs-ecscfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
Default: VPC-V2
EasDefaultRoute LCP-ISC R20.1 A TEL URL which is E.164 number or a string of 2-16
(req for ent,req for ed) characters which is composed of ??followed by 1-15
digits.
VpcMfifFqdn LCP-ISC R20.1 String (min length: 0 ~ max length: 256)
(opt for ent,opt for ed)
SourceContactTel LCP-ISC R20.1 A TEL URL which is E.164 number or a string of 2-16
(opt for ent,opt for ed) characters which is composed of ??followed by 1-15
digits.
SourceCertUri LCP-ISC R20.1 String (0 ~ 256).
Default: None
SupportOfEsgWri LCP-ISC R20.1 Boolean (true/false)
(req for ent,req for ed)
Default: false
PersistentConnection LCP-ISC R20.1 Boolean (true or false)
(req for ent,req for ed) Default:false
Default: null
Default: null
D.259 ngfs-ecscfipaddrmaptable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.260 ngfs-ecscfipaddrmaprecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.261 ngfs-ecscfacceloctable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.262 ngfs-ecscfaccelocrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.263 ngfs-ecscfsbcdomnmaptable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.264 ngfs-ecscfsbcdomnmaprecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.265 ngfs-emergserviceidtable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.266 ngfs-emergserviceidrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later!
D.267 ngfs-locationxlate-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
DialedCode:
String (1-15)
[0-9+#*]*
RNC:
String (3-15)
[a-zA-Z0-9:\\-\\._]*
CellNumber
Integer (1-2048)
SectorNumber
Integer (1-6)
TranslateNumber
String (3-15) Value range [0-9+#*]*
D.268 ngfs-sectoridmappingrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
SectorID:
HEX string of exactly 32 hex digits
RNC:
String (3-15)
[a-zA-Z0-9:\\-\\._]*
CellNumber
Integer (1-2048)
SectorNumber
Integer (1-6)
D.269 ngfs-vpngroup-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! VPN Group
VPN ID
Integer string
Range: 1 - 9999999999
Default: blank
Default: blank
D.270 ngfs-vpngroupreverse-v2(rtrv)
Added for LCP-CTS R7.1.1 and later! VPN Group Reverse
Short Code and First Short Code are both parts of the
'rtrv' results.
Full Number
String of 1 to 15 characters
Valid characters: digits 0-9, optionally preceded by +
Default: blank
VPN ID
Integer string
Range: 1 - 9999999999
Default: blank
D.271 ngfs-vpnlcr-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! VPN Least Cost Routing
VPN ID
Integer string
Range: 1 - 9999999999
Default: blank
LCR Domain
String of 0 to 64 characters
Restrictions: FQDN or IPv4/v6
Default: blank
Prefix
String of 0 to 15 characters
Valid characters: digits 0-9, *, #, optionally preceded by
+
Default: blank
D.272 ngfs-vpnicr-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1.1 and later! VPN International Least Cost Routing
Default: blank
ICRDomain LCP-CTS R7.1.1 Length: string of 0 to 64 characters.
(req for ent,opt for ed) Valid characters:
[0-9a-zA-Z.-]*)|([0-9.]*)|([[0-9a-fA-F:.]*]
Default: blank
D.273 ngfs-corebearerrealmtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.274 ngfs-corebearerrealmrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
CoreBearerRealmId Integer(1-1024)
LCP-ISC R20.1 Aid of Core Bearer Realm Record.
Aid has format of the
NgfsCoreBearerRealmTblAid`CoreBearerRealmId
CoreBearerRealmId Integer(1-2048)
CoreBearerRealmName LCP-CTS R6.2.1 String(1-128)
(req for ent,req for ed)
D.275 ngfs-publishedrealmtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.276 ngfs-publishedrealmrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
PublishedRealmId, Integer(1-1024)
LCP-ISC R20.1 Aid of Published Realm Record.
Aid has format of the
NgfsPublishedRealmTblAid`PublishedRealmId
PublishedRealmId, Integer(1-2048)
PublishedRealmName LCP-CTS R6.2.1 String(1-128)
(req for ent,opt for ed)
IPVersion LCP-CTS R6.2.1 Valid value:
(req for ent,opt for ed) v4, v6, v4/v6
Default v4
SigV4VLAN LCP-CTS R6.2.1 untagged, 1-4094, "blank"
(opt for ent,opt for ed) default untagged
If IPVersion is v4 or v4/v6, set to untagged.
D.277 ngfs-sdpprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later!
D.278 ngfs-sdpprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later!
PCMU,PCMA,G723,G729,
AMR,EVRC0,EVRCB0,G726-16, G726-24,G726-32,
G726-40,G728, AMR_WB, GSM, GSM-EFR,
GSM-HR, G722 bandwidth range:0-128
GoldenCodecSet LCP-ISC R20.0 List of Golden Codec Set.
(opt for ent,opt for ed) Format as codec1|codec2|codec3|...
Codec range: PCMU, PCMA, G723, G729, AMR,
EVRC0, EVRCB0, G726-16, G726-24, G726-32, G726-40,
G728, AMR-WB, GSM, GSM-EFR, GSM-HR,
G722
AuxiliaryCodecSet LCP-ISC R20.0 List of Auxiliary Codecs.
(opt for ent,opt for ed)
Format as codec1|codec2....
Codec range: CN, DTMF
DefaultAudioBandwidth LCP-ISC R20.0 Integer{0-128}
(opt for ent,opt for ed) Default: 0
DefaultVideoBandwidth LCP-ISC R20.0 Integer{0-2048}
(opt for ent,opt for ed) Default: 64
DefaultMessageBandwidth LCP-ISC R20.0 Integer{0-2048}
(opt for ent,opt for ed) Default: 128
DefaultTextBandwidth LCP-ISC R20.0 Integer{0-2048}
(opt for ent,opt for ed) Default: 128
DefaultApplicationBandwidth LCP-ISC R20.0 Integer{0-2048}
(opt for ent,opt for ed)
Default: 128
D.279 ngfs-bordergwpubrealmtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.280 ngfs-bordergwpubrealmrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
Record Integer(1024-1346)
PublishedRealms LCP-CTS R6.2.1 List all the published realm ids
(req for ent,req for ed) Selected, up to 1024. Format as:
PublishedRealmId1^ PublishedRealmId2^...
PublishedRealmId*, Integer(1-1024)
D.281 ngfs-glsdb-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.282 ngfs-localmapversiontable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.283 ngfs-localmapversionrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
Default:NTWLOCUP
MapVersion LCP-SCG 7.0 MAP Version 1, MAP Version 2, MAP Version 3,
(opt for ent,opt for ed) MAP Version 4, NULL Version
Default:NULL Version
D.284 ngfs-mapoperationtimerstable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.285 ngfs-mapoperationtimersrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
Operation Values:
ATSI , UPDLOC , CANLOC , PRVDRN ,
RSMCH , ISD , DSD , SNDPAR , REGSS ,
ERASESS , ACTSS , DACTSS , INTSS ,
AUTHFAILRPT , FWRDSSNOT
SSINV , PSUBINF , SR
Default:UPDLOC
Timer LCP-SCG 7.0 0-600
(opt for ent,opt for ed) Default:0
Unit LCP-SCG 7.0 Millisecond,Second,Hour
(opt for ent,opt for ed) Default:Millisecond
Priority LCP-SCG 7.0 0,1,2,3
(opt for ent,opt for ed) Default:0
D.286 ngfs-ss7gti-v2(rtrv,ent,dlt)
Added for LCP-CTS R7.0 and later!
StackId: 0-6
GlobalTitleIndicator: 1-4
NumberingPlan: 0-15
NatureOfAddress: 0-127
TranslationType: 0-255
TranslationGroup LCP-CTS R7.0 0-255
(opt for ent,opt for ed) Default:0
D.287 ngfs-ss7sccpentity-v2(rtrv,ent,dlt)
Added for LCP-CTS R7.0 and later!
StackId: 0-6
SccpEntityId: 1-2000
DPC LCP-CTS R7.0 ((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\\.){2}((25[0-
(opt for ent,opt for ed)
5])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
SubsystemNumber LCP-CTS R7.0 0-255
(opt for ent,opt for ed) Default:0
GlobalTitleIndicator LCP-CTS R7.0 0-4
(opt for ent,opt for ed) Default:0
NumberingPlan LCP-CTS R7.0 0-15, NULL
(opt for ent,opt for ed)
NatureOfAddress LCP-CTS R7.0 0-127, NULL
(opt for ent,opt for ed)
TranslationType LCP-CTS R7.0 0-255, MULL
(opt for ent,opt for ed)
GTTDigits LCP-CTS R7.0 0-16 characters, pattern: [0-9a-e]*
(opt for ent,opt for ed)
D.288 ngfs-ss7sccpentityset-v2(rtrv,ent,dlt)
Added for LCP-CTS R7.0 and later!
StackId: 0-6
SccpEntityId: 5001-7000
SccpEntities LCP-CTS R7.0 1 to 4 entries in list of sccp entities (Rage 1-2000)
(opt for ent,opt for ed)
LoadShareIndicator LCP-CTS R7.0 Boolean
(opt for ent,opt for ed) Default false
D.289 ngfs-ss7timer-v2(rtrv,ed)
Added for LCP-CTS R7.0 and later!
D.290 ngfs-ss7m3uaasp-v2(rtrv,ent,dlt)
Added for LCP-CTS R7.0 and later!
D.291 ngfs-ss7m3uaas-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later! SS7 M3UA AS
D.292 ngfs-ss7m3uasg-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later! M3UA SG
[0-6]-((([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-5]))\.){2}((
25[0-5])|(2[0-4][0-9])|([0
-1]?[0-9]?[0-9]))
D.293 ngfs-ss7m3uaaspsg-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later! SS7 M3UA ASP SCG
AspIpspNumber: 0-63
SgpIpspNumber: 0-255
Default:0`0
AspIpspMode LCP-CTS R7.0 0: ASP,1: IPSP Client,2: IPSP Server
(opt for ent,opt for ed) Default 0: ASP
SctpProfile LCP-CTS R7.0 0-31
(opt for ent,opt for ed) Default:0
ServiceState LCP-CTS R7.0 Allowed Values: INS,OOS
(na for ent,opt for ed)
D.294 ngfs-ss7m3uaparam-v2(rtrv,ed)
Added for LCP-CTS R7.0 and later!
D.295 ngfs-ss7gtttable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later!
D.296 ngfs-ss7gttrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later!
TableId: 1-99
StackId: 0-6
TranslationGroup: 0-31
GttDigits: 0-16 chars [0-9a-e]
Default:Route on GT - Route on GT
RemoveGtt LCP-CTS R7.0 Boolean
(opt for ent,opt for ed) Default:false
SccpEntitySet LCP-CTS R7.0 5001-7000
(opt for ent,opt for ed) Default:5001
D.297 ngfs-ss7stack-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! Stack paramenters settings
default: 000.000.000
CauseLocation LCP-SCG 7.0 SS7 Stack Cause Location
(opt for ent,na for ed) Values:
User
"TUP", "WRLS/SCCP",
"WRLS/SCCP/ISUP", "WRLS/SCCP/M3UA"
default: ISUP
PointCodeType LCP-SCG 7.0 Point Code Type
(opt for ent,na for ed) values "X-X-X"
default: X-X-X
PointCodeFormat LCP-SCG 7.0 Point Code Format
(opt for ent,na for ed) values:
"5-4-7", "3-8-3", "5-7-2", "8-8-8"
default: 8-8-8
MTPPause LCP-SCG 7.0 MTP Pause
(opt for ent,na for ed) values
"Delayed", "Immediate"
default: Immediate
MessagePacingWindowSize LCP-SCG 7.0 Message Pacing Window Size
(opt for ent,na for ed) int 1 to 20
default 5
MTPCongestionControl LCP-SCG 7.0 MTP Congestion Control
(opt for ent,na for ed) values:
"MCL w/ Priority", "MCL w/o Priority", "Single
Level"
D.298 ngfs-ss7subsystem-v2(rtrv,ent,dlt)
Added for LCP-SCG 7.0 and later! SS7 Subsystem Parameters
D.299 ngfs-ss7linkset-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! SS7 Link Set Parameters
D.300 ngfs-ss7translationgroup-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! SS7 Translation Group Parameters
D.301 ngfs-ss7routedestination-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! SS7 Route Destination
D.302 ngfs-ss7m3uadpc-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.0 and later! Provission SS7 M3UA DPC
5])|(2[0-4][0-9])|([0-1]?[0-9]?[0-9]))
Remarks LCP-CTS R7.0 Remarks
(opt for ent,opt for ed) String 0 to 32 characters
default blank
DpcType LCP-CTS R7.0 DPC Type String
(opt for ent,na for ed) values blank, "ISUP", "WRLS"
default: blank
ProjectedIsupCicCount LCP-CTS R7.0 Projected ISUP CIC Count
(opt for ent,na for ed) Integer 0 to 65535
default 0
Ss7DSnode LCP-CTS R7.0 SS7 DS Node ID
(opt for ent,na for ed) integer 256 to 319
default 256
D.303 ngfs-wrlsnumtosccptable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.304 ngfs-wrlsnumtosccprecord-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
Default:MID
TranslationType LCP-SCG 7.0 0-255
(opt for ent,opt for ed) Default:0
NatureOfAddress LCP-SCG 7.0 0-7
(opt for ent,opt for ed) Default:0
VersionDigits LCP-SCG 7.0 0-31
(opt for ent,opt for ed) Default:0
D.305 ngfs-mobiltoisdntable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.306 ngfs-mobiltoisdnrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.307 ngfs-publiclandmobiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
D.308 ngfs-publiclandmobilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later!
PLMN Id:
Mobile Country Code|Mobile Network Code
Mobile Country Code:
3 digits, "[0-9][0-9][1-9]|[0-9][1-9][0]|[1-9][0][0]"
networkCode:
1-8 digits, "[0-9]*"
msinLength:
0-5
lacClusterId:
1-2 digits, "[0-9]*"
serviceAllowed,callingPartyCategory,camelRestricted,conf
identiality,prefixMobileNpa,subsCallTraceActivation,ena
bleWps: boolean
Default:0`0`0`false`false`false`true`false`false`false
AuthenticationVectors LCP-SCG 7.0 initialAuthCount`replenishAuthCount`unusedAuthCount
(opt for ent,opt for ed)
initialAuthCount: 1-5
replenishAuthCount: 1-5
unusedAuthCount: 0-5
Default:1`5`5`
UmtsData LCP-SCG 7.0 umtsAccessRestriction ` umtsTelServiceHo `
(opt for ent,opt for ed) umtsTelDenyCall ` umtsCsdServiceHo ` umtsCsdDenyCall
` umtsEmergServiceHo ` umtsEmergDenyCall `
umtsHlrSsCode `
umtsAccessRestriction: boolean
umtsTelServiceHo:
"Default", "No Indication", "Should HO to
umtsTelDenyCall:
"Default", "Yes", "No"
umtsCsdServiceHo:
"Default","No Indication","Shall not HO to GSM"
umtsCsdDenyCall:
"Default", "Yes", "No"
umtsEmergServiceHo:
"Default", "No Indication", "Should HO to
GSM","Should not HO to GSM", "Shall not HO to
GSM"
umtsEmergDenyCall:
"Default", "Yes", "No"
umtsHlrSsCode:
"None", "Plmn-SpecificSS-1(F1)",
"Plmn-SpecificSS-2(F2)","Plmn-SpecificSS-3(F3)","P
lmn-SpecificSS-4(F4)","Plmn-SpecificSS-5(F5)",
"Plmn-SpecificSS-6(F6)","Plmn-SpecificSS-7(F7)","P
lmn-SpecificSS-8(F8)", "Plmn-SpecificSS-9(F9)",
"Plmn-SpecificSS-A(FA)", "Plmn-SpecificSS-B(FB)",
"Plmn-SpecificSS-C(FC)", "Plmn-SpecificSS-D(FD)",
"Plmn-SpecificSS-E(FE)", "Plmn-SpecificSS-F(FF)"
Default:false`Default`Default`Default`Default`Default`
Default`None`
GsmData LCP-SCG 7.0 gsmAccessRestriction ` gsmTelServiceHo `
(opt for ent,opt for ed) gsmTelDenyCall ` gsmCsdServiceHo ` gsmCsdDenyCall `
gsmEmergServiceHo ` gsmEmergDenyCall ` gsmHlrSsCode
`
gsmAccessRestriction: boolean
gsmTelServiceHo:
"Default", "No Indication", "Should HO to
UMTS","Should not HO to UMTS", "Shall not HO to
UTMS"
gsmTelDenyCall:
"Default", "Yes", "No"
gsmCsdServiceHo:
"Default", "No Indication", "Should HO to
UMTS","Should not HO to UMTS", "Shall not HO to
UTMS"
gsmCsdDenyCall:
"Default", "Yes", "No"
gsmEmergServiceHo:
"Default", "No Indication", "Should HO to
gsmEmergDenyCall:
"Default", "Yes", "No"
gsmHlrSsCode:
"None", "Plmn-SpecificSS-1(F1)",
"Plmn-SpecificSS-2(F2)","Plmn-SpecificSS-3(F3)","P
lmn-SpecificSS-4(F4)", "Plmn-SpecificSS-5(F5)",
"Plmn-SpecificSS-6(F6)","Plmn-SpecificSS-7(F7)","P
lmn-SpecificSS-8(F8)","Plmn-SpecificSS-9(F9)",
"Plmn-SpecificSS-A(FA)", "Plmn-SpecificSS-B(FB)",
"Plmn-SpecificSS-C(FC)", "Plmn-SpecificSS-D(FD)",
"Plmn-SpecificSS-E(FE)", "Plmn-SpecificSS-F(FF)"
Default:false`Default`Default`Default`Default`Default`
Default`None`
D.309 ngfs-npasplittable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.310 ngfs-npasplittablerec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R6.2.1 and later!
D.311 ngfs-scgprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG MMAS profile table
D.312 ngfs-scgprofiletablerec-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG MMAS profile table record
String:0~15
default: null
dmsCfTreatmentSer LCP-SCG 7.0 Service provider preference for Late Call Forwarding
and Immediate Call Forwarding.
Int (0~2147483647)
default: 0
LCP-SCG 7.1 not used.
vccAsOrigPsi LCP-SCG 7.0 Defines the option to use per provisioning the originating
PSI on S-CSCF tables. If this parameter is not
populated, the FS2500 scenarios that require the use of a
PSI will not work.
Int (0~30)
default: 0
LCP-SCG 7.1 not used.
imSsf LCP-SCG 7.0 IP Multimedia Service Switching Function
(IM-SSF) is a SIP application server for CAMEL in
the IP Multimedia Core Network.
YesNo
default: No
LCP-SCG 7.1 not used.
userPhone LCP-SCG 7.0 YesNo
default: No
LCP-SCG 7.1 Not used in SCG7.1 and beyond.
supportSmsDereg LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
supportNeds LCP-SCG 7.0 Defines whether or not support of NeDS is active for
the MMAS. This parameter will not be allowed to be set
to No so it will be grayed out with a value of Yes.
YesNo
default: Yes
LCP-SCG 7.1 not used.
addCfnaHeader LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
serviceProPre LCP-SCG 7.0 Defines the preference for the selection of the service
provider. This preference is used for call delivery.
Certain scenarios can override this preference (for
example: existing call location). If "Support NeDS" is
set to "No" then this parameter will be grayed out.
enumeration value="None"
enumeration value="IMS"
enumeration value="CS"
default: IMS
LCP-SCG 7.1 Defines the preference for the selection of the service
provider. This preference is used for call delivery.
enumeration value="None"
enumeration value="IMS"
enumeration value="CS"
default: IMS
retryImsCallCsDelay LCP-SCG 7.0 Defines the time that a failed call from IMS to CS
(opt for ent,opt for ed) shall be retried. If "Support NeDS" is set to "No"
then this parameter will be grayed out.
YesNo
default: No
LCP-SCG 7.1 not used.
sendAtmMesToHlr LCP-SCG 7.0 When set to "Yes", indicates that ATM messages are
sent to the HLR by NeDS.
YesNo
default: No
LCP-SCG 7.1 not used.
dnScenarioPossible LCP-SCG 7.0 Defines whether or not two DN scenarios are possible for
NeDS.
YesNo
default: No
LCP-SCG 7.1 not used.
retryCsCallToIms LCP-SCG 7.0 If set to "Yes", the NeDS supports retry procedures if
(na for ent,na for ed) the call delivery from CS to IMS fails. This
parameter will not be needed for the SCG so it will be
grayed out.
YesNo
default: No
spare1a LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1b LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1c LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1d LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1e LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1f LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1g LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare1h LCP-SCG 7.0 YesNo
(opt for ent,opt for ed) default: No
spare2 LCP-SCG 7.0 integer: 0~65535
(opt for ent,opt for ed) default: 0
spare3 LCP-SCG 7.0 integer: 0~65535
(opt for ent,opt for ed) default: 0
origTypeReqUri LCP-SCG 7.1 TEL URI or SIP URI.
(opt for ent,opt for ed) Default: TEL URI
origTypeFrom LCP-SCG 7.1 TEL URI, SIP URI, or Passed as received.
(opt for ent,opt for ed)
Default: TEL URI
origTypeTo LCP-SCG 7.1 TEL URI or SIP URI.
(opt for ent,opt for ed) Default: TEL URI
origTypePAssertId LCP-SCG 7.1 TEL URI, SIP URI, or Passed as received.
(opt for ent,opt for ed)
Default: TEL URI
termTypeReqUri LCP-SCG 7.1 TEL URI or SIP URI.
Values: true,false
Default: false
D.313 ngfs-voiptable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG VOIP table
D.314 ngfs-voiptablerec-v2(rtrv,ent,dlt)
Added for LCP-SCG 7.0 and later! for SCG VOIP table
D.315 ngfs-stntable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG HOAS table
D.316 ngfs-stntablerec-v2(rtrv,ent,dlt)
Added for LCP-SCG 7.0 and later! for SCG HOAS table record
D.317 ngfs-vlrhosttable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG VLR Host Data table
D.318 ngfs-vlrhosttablerec-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG VLR Host Data table record
IPString
secondaryHostIp LCP-SCG 7.0 Secondary VLR Host IP address. This parameter is
(na for ent,na for ed) for display only so it will be grayed out and not used for
add or modify operation.
IPString
maxVlrRecord LCP-SCG 7.0 Defines the maximum amount of VLR records that can be
(req for ent,req for ed) stored on this host.
Int (0~360000)
D.319 ngfs-roamhotable-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG Roam HO table
D.320 ngfs-roamhotablerec-v2(rtrv,ent,ed,dlt)
Added for LCP-SCG 7.0 and later! for SCG Roam HO table record
enumeration value="10"
enumeration value="100"
default: 100
enumeration value="Active"
enumeration value="Idle"
enumeration value="Standby"
default: Active
vlrHostId LCP-SCG 7.0 retrieve from VLR Host Data Table
(opt for ent,na for ed) Int_0_255
lacPoolId LCP-SCG 7.0 Identifier for the regional Mobile Station Roaming
(opt for ent,opt for ed) Number (MSRN) or Handover Number (HON) pool to
which the number range belongs to.
Int (0~255)
default: 0
D.321 ngfs-dscpprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! DSCP profiel table in PDF tables
number.
TableName LCP-ISC R20.0 String (1-19)
(req for ent,req for ed) ([\S]|[\S][a-zA-Z0-9\*#\.,\-
+'~`!@$%^:;=(){}\[\]?"&></_|\\ ]*[\S])
D.322 ngfs-dscpprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! DSCP profile record in PDF tables
D.323 ngfs-pdfprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! PDF table
number.
TableName LCP-ISC R20.0 String (1-19)
(req for ent,req for ed) ([\S]|[\S][a-zA-Z0-9\*#\.,\-
+'~`!@$%^:;=(){}\[\]?"&></_|\\ ]*[\S])
D.324 ngfs-pdfprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! PDF profile table Record
D.325 ngfs-sipstacktimertable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! Sip Stack Timer Profile Table
D.326 ngfs-sipstacktimerrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! Sip Stack Timer Profile Record
Default: 2000ms
Timer2 LCP-ISC R20.0 Range: 1 sec - 32 sec with 1 second increments
Default: 16 seconds
Timer4 LCP-ISC R20.0 Range: 2 sec - 36 sec with 1 second increments,
(req for ent,req for ed)
Default: 17 seconds
TimerC LCP-ISC R20.0 Range: 180 sec - 240 sec with 1 second increments
(req for ent,req for ed)
Default=9x.
D.327 ngfs-nonanchoreddesttbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later!
D.328 ngfs-nonanchoreddestrec-v2(rtrv,ent,dlt)
Added for LCP-ISC R20.0 and later!
D.329 ngfs-cpctextstringtable-v2(rtrv,ed)
Added for LCP-CTS R7.1 and later! CPC Text String Table
D.330 ngfs-cpctextstringrecord-v2(rtrv,ed)
Added for LCP-CTS R7.1 and later! CPC Text String Record
D.331 ngfs-virtualgrouptable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later!
D.332 ngfs-virtualgrouprecord-v2(rtrv,ent,dlt)
Added for LCP-ISC R20.0 and later! rtrv, ent, dlt
D.333 ngfs-servicelevelpolicytbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! (rtrv, ent, ed, dlt)
D.334 ngfs-servicelevelpolicyrec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! Service Level Policy Record, support rtrv, ent, ed, dlt
D.335 ngfs-mappingprofiletable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! Virtual Group and Service mapping, support rtrv, ent, ed, dlt
Range: 1-1024,
TableName LCP-ISC R20.0 Length for the table name is between 1 and 19
(req for ent,req for ed)
D.336 ngfs-mappingprofilerecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! Virtual Group and Service mapping record, support rtrv, ent, ed, dlt
`VirtualGroupTableId
For VirtualGroupTableId, range: 1-1024,
`VirtualGroupTableId
For VirtualGroupTableId, range: 1-2048,
D.337 ngfs-h248dsvarianttable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! Provision for H248 Device Service Variant Table
D.338 ngfs-h248dsvariantrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! Provision for H248 Device Service Variant Record
D.339 ngfs-h248gwvarianttable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! Provision for H248 Gateway Variant Table
D.340 ngfs-h248gwvariantrecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! Provision for H248 Gateway Variant Record
D.341 ngfs-h248deviceservice-v2(rtrv)
Added for LCP-ISC R20.0.1 and later! Provision for H248 Device Service
D.342 ngfs-gateways-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0.1 and later! support gateways
Based"
EnableChannelStatusAudit LCP-ISC R20.0.1 Boolean.
(na for ent,na for ed) Range: True or False
ServiceStateChangeSupport LCP-ISC R20.0.1 Boolean.
(na for ent,na for ed)
Range: true or false
EnableIpCoreNetwkBypass LCP-ISC R20.0.1 Boolean.
(na for ent,na for ed) Range: True or False
ParameterVariant LCP-ISC R20.0.1 String
(opt for ent,opt for ed)
D.343 ngfs-ipsecsatable-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! For IPsec SA Table
D.344 ngfs-ipsecsarecord-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! For IPsec SA Attribute
D.345 ngfs-extdomainroutetbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! For External Domain Routing Table
D.346 ngfs-extdomainrouterec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! For External Domain Routing Record
D.347 ngfs-diamport-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.0 and later! For Diam Port
D.348 ngfs-diamappparameters-v2(rtrv,ed)
Added for LCP-ISC R20.0 and later! For Diameter Application ID Parameters
D.349 ngfs-siptoq850mappingtable-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later!
0 or Integer (256-999)
Name LCP-CTS R7.1 String (1-19)
(req for ent,req for ed) ([\S]|[\S][a-zA-Z0-9\*#\.,\-+'~`!@$%^:;=(){}\[\]?"&
apos;&></_|\\ ]*[\S])
D.350 ngfs-siptoq850mappingrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later!
0 or Integer (259-999)
ErrorCode LCP-CTS R7.1 SIP Response
(req for ent,req for ed) Integer (400-699),default is 400
ErrorDefinition LCP-CTS R7.1 SIP Definition
(req for ent,req for ed) String (1-40).
Q850Cause LCP-CTS R7.1 Q.850 Cause
(req for ent,req for ed) Integer (1-127)
Q850Definition LCP-CTS R7.1 Q.850 Definition
(req for ent,req for ed)
String (1-80).
D.351 ngfs-serviceinforidmaptbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! CTS/AS support CMCC AVP
D.352 ngfs-serviceinforidmaprec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! CTS/AS support CMCC AVP
D.353 ngfs-agcfsipertoh248tbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! iAGCF SIP Error Code to H.248 Tone Mapping Table
D.354 ngfs-agcfsipertoh248rec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! iAGCF SIP Error Code to H.248 Tone Mapping Table Record
(req for ent,na for ed) Integers 1-9, valid for R22.20 and beyond, represent the
following strings:
1 "Default"
2 "No Digit Match"
3 "Partial Digit Match"
4 "Full Digit Match"
5 "Far End Call Release"
6 "Call Rejected due to AGCF Overload"
7 "Invalid or No R-Digits"
8 "Midcall No Dialed Digits"
9 "Midcall No Dialed Digits Last Try"
H248Tone LCP-CTS R7.1 Enum: None, Busy, Reorder, Comfort, Congestion,
(opt for ent,opt for ed) Special Information, Vacant, Warning, Reduced Battery,
ROH.
Default: Busy
H248SecondTone LCP-CTS R7.1.1 Enum: None, Busy, Reorder, Comfort, Congestion,
(opt for ent,opt for ed) Special Information, Vacant, Warning, Reduced Battery,
ROH.
Default: None
D.355 ngfs-agcf2nddtdigittbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! AGCF Second Dial Tone Digit Strings Table
D.356 ngfs-agcf2nddtdigitrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! AGCF Second Dial Tone Digit Strings Table Record
D.357 ngfs-agcf2nddtdigitgtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! AGCF Second Dial Tone Digit String Group Table
D.358 ngfs-agcf2nddtdigitgrec-v2(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! AGCF Second Dial Tone Digit String Group Table Record
D.359 ngfs-mrfannouncementtbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! MRF Announcement Table
D.360 ngfs-mrfannouncementrec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! MRF Announcement Record
Default: None
FileName LCP-ISC R20.1 String(1-128).Regular expression is as
(req for ent,opt for ed) following:[a-zA-Z0-9\\*#+\\.,\\-'!$()&><%/]*
Default: None
D.361 ngfs-mrfanninfproftbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! MRF Announcement Interface Profile Table
D.362 ngfs-mrfanninfprofrec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! MRF Announcement Interface Profile Record
Default: none
D.363 ngfs-canmprofiletbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! CANM Profile Table
([\\S]|[\\S][a-zA-Z0-9\\*#\\.,\\-+'~`!@$%^:;=(){}\\[\\]?
\"'&<>/_|\\\\ ]*[\\S])
D.364 ngfs-canmprofilerec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! CANM Profile Record
D.365 ngfs-canmtretridatatbl-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! CANM Treatement Trigger Data Table
D.366 ngfs-canmtretridatarec-v2(rtrv,ent,ed,dlt)
Added for LCP-ISC R20.1 and later! CANM Treatment Trigger Data Record
D.367 motive-subscriber(rtrv,ent,ed,dlt)
Added for LCP-CTS R7.1 and later! Support for Enterprise Subcriber prov on Motive
SelectiveCallAcpt
AutomaticCallBack
AutomaticRecall
CallingLineId
RemoteAccessServer
CallBarring
CallBlocking
CallTransfer
CallWaiting
CallForwardingVari
CallForwardingBusy
CallForwardingNoAns
SelectiveCallFwd
CallForwardingUnreg
CustomerOrigTrace
NuisanceCallTrace
DoNotDisturb
MsgWaitingInd
SimultaneousRinging
WebPortal
ConferenceCalling
FlashOrigServices
CarrierSelection
RingbackWhenFree
MultipleRingPattern
CallForwardingLocal
RemoteAccessServices
VoiceMail
InterceptReferral
DialingPlan
HSSPrivateId
HSSPublicIdCustom
AcctCodes
SeqRinging
AuthCodeService
MLHGNoHuntMember
MultilineHuntGroup
CallPickupOrig
CallPickupTerm
Attendant
AttendantServer
CallPark
DirectedGroup
RemoteUser
TransferToUsersVM
FlexCallingLineId
ExtensionDevice
PSIServer
ClosedUserGroup
OneDigitSpeedDial
TwoDigitSpeedDial
ExtensionServer
SelectiveAlert
ShortCodeTranslate
ReminderCall
SetTZPath
InhibitIncomingFwd
BearerBasedCallFwd
TimeOriginatedRC
MobileDMS
MLPP
MusicOnHold
MiRingback
SelNomadicBlocking
AutoDial
CallForwardingDefault
CCBS
BlockCCBS
AINFeatcodeTrigger
AINPDPcodeTrigger
AINOHDTrigger
AINTATTrigger
GLSAccess
SharedNumber
CallDeflection
AutoAttendant
AdjunctTerminating
OutgoingCallBarring
RDigitParms
TransitRouting
LocationNumber
FemtoBSR
GeneralReset
Metering
PinService
WholeSale
SpareService
UseHoldAnnouncement
VPNDialingAndDisplay
PriorityModeCalling
OneNumber
1 SubParty
A subscriber can have upto 10 Public UID. Along with a primary PUID, a subscriber can have an additional
9 PUIDs.
String (0-15).
[
+0-9a-zA-Z(),':@&=!\-_\.!~\*%#><$^\|?{}\[\];/`]*
Category String containing the Feature Set the party is assigned.
The category is the feature bundle.
PartyId Name for Party record.
String (1-27)
[+0-9a-zA-Z:@&=!,|-_.!~*()%]*
Before CTS R5.0:
[+0-9a-zA-Z:@&=!,-_.!~*'()%]*
NewPartyId LCP-CTS R6.2.1 The new partyId. Used for changing partyId. Only used
for ed command.
String (0-63)
[0-9a-zA-Z\.\-]*
NetworkProfileName LCP-CTS R7.1.1 Name of the Network Profile
String (0-20)
[0-9a-zA-Z\-_]*
When a subparty is associated with a template, any
conflicting field will be silently overridden by the
template's value.
NetworkProfileVersion LCP-CTS R7.1.1 Version of the Network Profile
int (1-99)
ServiceProfileName LCP-CTS R7.1.1 Name of the Service Profile
String (0-20)
[0-9a-zA-Z\-_]*
When a subparty is associated with a template, any
conflicting field will be silently overridden by the
template's value.
ServiceProfileVersion LCP-CTS R7.1.1 Version of the Service Profile
int (1-99)
CallLimit Maximum number of simultaneous calls permitted for this
subscriber.
Integer(1-1024)
ServiceSuspension Suspend services
Boolean (true or false)
AssocWpifRealm Web portal interface URI.
String(0-63)
[0-9a-zA-Z\.\-]*
IddPrefix LCP-CTS R3.0 IDD Prefix. Number string(0-5)
AlternateFsdbFqdn LCP-CTS R3.0 Alternate Fsdb fully qualified domain name.
String(0-63)
[0-9a-zA-Z:-_.]*
SharedHssData LCP-CTS R3.0 Has Shared Hss Data or not.
Boolean(true or false)
Pin LCP-CTS R4.0 String(0 or 4-10)
[0-9]*
Pin is required for the User Control options
Note: If you change this pin field you must also change
the associated PSI Extension and PSI User pins
Default false
MaxFwdHops LCP-CTS R4.1 Maximum number of Call Forwarding Hops
Integer (1-20)
CsdFlavor LCP-CTS R5.0 Valid values:
TAS_CSD_NONE, TAS_CSD_AIMS_P0,
TAS_CSD_ALU_P2
Default false
SipErrorTableId LCP-CTS R5.0 SIP error handling table ID which can be assigned on a
per Party basis to provide the flexibility to support
individual customization for handling SIP error
responses.
Locale LCP-CTS R5.0 The locale of the subscriber which is used to override the
system locale on a per Party basis.
([a-zA-Z]{2}([a-zA-Z]) ?_[a-zA-Z]{
2}([a-zA-Z])?)?
For example: en_us
CliPrefixList LCP-CTS R5.0 A comma separated list of prefixes which are to be
stripped off before presenting calling or called numbers.
Default is TAS_181_NONE
CcNdcLength LCP-CTS R6.0 0 or integer (3-10) default 0
MaxActiveCalls LCP-CTS R6.0 Integer (0-1024) default 0
The value should less than CallLimit
CallingPartyCategory LCP-CTS R6.1 String indicates the Party Type.
Valid Values:
CPC_ORDINARY
CPC_OPERATOR
CPC_PRIORITY
CPC_DATA
CPC_TEST
CPC_PAYPHONE
CPC_CELLULAR
CPC_PRISON
CPC_HOTEL
CPC_POLICE
CPC_UNKNOWN
CPC_HOSPITAL
CPC_SPARE14
CPC_SPARE15
CPC_SPARE16
CPC_SPARE17
CPC_SPARE18
CPC_SPARE19
CPC_SPARE20
CPC_SPARE21
CPC_SPARE22
CPC_SPARE23
CPC_SPARE24
CPC_SPARE25
CPC_SPARE26
CPC_SPARE27
CPC_SPARE28
CPC_SPARE29
CPC_SPARE30
CPC_SPARE31
Default CPC_ORDINARY
PublicUID1 Secondary Phone number of endpoint.
String (1-32)
[+0-9a-zA-Z:,\-_\.()]*
LCP-CTS R6.1 From CTS R6.1:
String(1-252)
[+0-9a-zA-Z:,-_.()&=?~/$'!*]*
PublicUID2 The same as PublicUID1
PublicUID3 The same as PublicUID1
PublicUID4 LCP-CTS R3.0 The same as PublicUID1
PublicUID5 LCP-CTS R3.0 The same as PublicUID1
PublicUID6 LCP-CTS R3.0 The same as PublicUID1
PublicUID7 LCP-CTS R3.0 The same as PublicUID1
String(3-64)
(+)?[0-9]*(!)[0-9-.*[]]+(!)
AllowCustomAnnouncement LCP-CTS R6.1 Boolean (true or false)
Indicates if the subscriber is allowed to use custom
announcements.
Default false
PtySpareLong1 LCP-CTS R6.1a (0-4294967295) default 0
The following party level spare fields are not stored in
CTS database now.
side.
2 AcctCodes
This feature is Per Party.
3 AnonymousCallRej
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party.
4 Attendant
This feature is Per Party. All the parameters are required.
[+0-9a-zA-Z:@&=!,\-_\.!~\*'()%$?/]*
LCP-CTS R5.0 From CTS R5.0:
[+0-9a-zA-Z(),':@&=\|\-_\.!~\*%#$?/]*
LCP-CTS R6.1 From CTS R6.1:
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
5 AttendantServer
This feature is Per Party. All the parameters are required.
6 AuthCodeService
This feature is Per Party.
Integer (1-65535)
AllowBilling Boolean (true or false)
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
7 AutomaticCallBack
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true, this
feature can be assigned per PUID, if false this feature is Per Party. Redial last initiated call, and automatically
retry (for a while) if destination is busy.
8 AutomaticRecall
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party. Last accepted incoming call is listed.
9 CallBarring
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party. Disallow certain types of outgoing calls,
e.g. International. Multiple variants.
CntrlUser13 LCP-CTS R7.0 User Control of call type "Service Provider Defined
13"
Value:0-9
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
10 CallBlocking
This feature is Per Party. Block (reject) certain types of incoming calls.
11 CallDeflection
This feature is Per PUID. Added for LCP-CTS R5.0 and later! Call forwarding invoked by user request while
a call is alerting.
12 CallForwardingBusy
This feature is Per PUID. This feature will forward all calls to a particular destination when the called party
is busy.
announcement.
Boolean(true or false)
Default: false
ReceiveNotify LCP-CTS R7.1.1 Boolean(true or false)
Default false
PinRequired LCP-CTS R5.0 Boolean(true or false)
Default false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
Activated Indicates if the subscriber has activated the feature.
13 CallForwardingLocal
This feature is Per Party. Added for LCP-CTS R2.0 and later! This feature allows the subscriber to use the call
forwarding feature of advanced endpoints.
14 CallForwardingNoAns
This feature is Per PUID. This feature will forward all calls to a particular destination when the called party
does not answer.
Boolean(true or false)
Default: false
ReceiveNotify LCP-CTS R7.1.1 Boolean(true or false)
Default false
15 CallForwardingUnreg
This feature is Per PUID. This feature will forward all calls to a particular destination when the called party is
not registered with the network yet.
Boolean(true or false)
Default: false
PinRequired LCP-CTS R5.0 Boolean(true or false)
Default false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
Activated LCP-CTS R3.0 Indicates if the subscriber has activated the feature.
16 CallForwardingVari
This feature is Per PUID. This feature will forward all calls to a particular destination.
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
Boolean(true or false)
Default: false
PinRequired LCP-CTS R5.0 Boolean(true or false)
Default false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
Default TAS_181_NONE
Activated Indicates if the subscriber has activated the feature.
17 CallingLineId
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party. This feature allows the subscriber to get
caller id services or setup calling id restriction.
PRIVATE
PERM_PRIVATE
PUBLIC
PERM_PUBLIC
18 OneNumber
This feature is Per Party. Added for LCP-CTS R7.1.1 and later! This feature allows the subscriber to assign
One Number Feature
PerPuid LCP-CTS R7.1.1 Indicates if the service data should NOT be derived
from the Primary PUID.
19 PriorityModeCalling
This feature is Per Party. Added for LCP-CTS R7.1.1 and later! This feature allows the subscriber to assign
PriorityMode Feature
20 CallPark
This feature is Per Party. All the parameters are required.
21 CallPickupOrig
This feature is Per Party. All the parameters are required.
22 CallPickupTerm
This feature is Per PUID. All the parameters are required.
23 CallTransfer
This feature is Per Party. Allows a subscriber a variety of options on how to transfer an incoming call to another
destination.
24 CallWaiting
This feature is Per Party. Notifies a customer of an incoming call while another call is already established.
25 CarrierSelection
This feature is Per Party. This feature allows a subscriber to set Carrier Selection.
26 ClosedUserGroup
This feature is Per Party.
CUGIncomingCallLimit LCP-CTS R5.0 Incoming CUG Call limit, must be 0 for CUG members
Integer (0-2000)
CUGOutgoingCallLimit LCP-CTS R5.0 Outgoing CUG Call limit, must be 0 for CUG members
Integer (0-2000)
27 ConferenceCalling
This feature is Per Party. This feature allows a subscriber to make a 3-way call.
28 CustomerOrigTrace
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party. This feature allows a subscriber to trace
the number of a calling party.
29 DialingPlan
This feature is Per Party. This feature allows a subscriber to set Dialing Plan .
String (0-16)
ESRN2 The Emergency Services Routing Number used in place of
a dialed emergency number (e.g. 311, 112, 911)
String (0-16)
ESRN3 The Emergency Services Routing Number used in place of
a dialed emergency number (e.g. 311, 112, 911)
String (0-16)
ESRN4 The Emergency Services Routing Number used in place of
a dialed emergency number (e.g. 311, 112, 911)
String (0-16)
ESRN5 The Emergency Services Routing Number used in place of
a dialed emergency number (e.g. 311, 112, 911)
String (0-16)
PrivateDialingPlan Digit table index.
Integer (0-4000)
PublicUID The PUID that this record is for.
30 DirectedGroup
This feature is Per Party. All the parameters are required.
31 DoNotDisturb
This feature is Per Party. This feature, when activated by a subscriber, will give the busy treatment to all incoming
calls.
GUI
32 ExtensionDevice
This feature is Per Party.
ExtensionType LCP-CTS R4.0 The term extension is used in several contexts in the
CTS. It generally means a separate device or directory
number that is associated with an CTS Party ID.
Valid value:
DEVICE_EXTENSION: is analogous to an
extension on an analog wire-line.
AllowDirectTermination LCP-CTS R4.0 It allows the extension device (DN or DMH) to get
direct calls. Devices can only get calls via the
Principal DN.
Boolean(true or false)
Only valid for DMH extension type
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
33 ExtensionServer
This feature is Per Party.
Boolean(true or false)
Default: false
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
34 FlashOrigServices
This feature is Per Party.
FLASH_ORIG_ALT_3WAY
LCP-CTS R5.0 Added for CTS R5.0 and later:
FLASH_ORIG_ PROG_RDIG
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
35 FlexCallingLineId
This feature is Per Party. All the parameters are required.
IdDisabledForEmergencyCalls LCP-CTS R7.1 When set to YES, the Flexible Line ID substitution
is not made if the call is determined to be an emergency
call
36 HSSPrivateId
This feature is Per Party. Added for LCP-CTS R6.0 and later! New format for OMC-P R13.0 and later:
Default 0
PridUser LCP-CTS R6.0 Private ID user name. Required for ent, optional for
ed.
String (1-32)
[0-9a-zA-Z+:@&=!,-_.!~*'()%]*
PrsetNumber LCP-CTS R6.0 Same as aid of HSS Permanent Registration Set
Integer (0-65535)
Default:0
ServerCapNumber LCP-CTS R6.0 Integer (0-65535)
Default:0
ProtectionGroupNumber LCP-CTS R6.1 The protection group number for this private id (used when
the private id is geo-redundant).
Default:0
ChargeInfoNum LCP-CTS R6.2.1 Integer (0-255)
Default:0
Zero implies the subscriber has no charge info.
MediaProfileId LCP-CTS R6.2.1 Integer (0-999)
Default:0
Zero implies the subscriber has no media profile
PuidUserList LCP-CTS R6.0 ArrayList for HSSPublicId
37 HSSPublicId
This feature is Per Party. Added for LCP-CTS R6.0 and later! New for OMC-P R13.0 and later:
String (1-32)
IsWildcardPuid LCP-CTS R6.0 Boolean (true or false)
Defaut:false
Barring LCP-CTS R6.0 Boolean (true or false)
Defaut:false
ImplRegSet LCP-CTS R6.0 Integer (1-32)
ServiceProfileNumber LCP-CTS R6.0 Index of Service Profile (see hss service profile
38 HSSPublicIdCustom
This feature is Per Party.
39 InterceptReferral
This feature is Per PUID.
40 MLHGNoHuntMember
This feature is Per PUID.
41 MsgWaitingInd
This feature is Per Party. This feature allows a subscriber to be notified when there is a voice mail message
waiting for them.
42 MultilineHuntGroup
This feature is Per Party.
or HUNT_UNIFORM
MemberNo Integer(0-2047)
SubGroupNo Integer(0-31)
MLHGTag Integer(1-99999)
StopAlwd Boolean (true or false)
GrpBusyAlwd Boolean (true or false)
GrpBusyAnnc LCP-CTS R7.1.1 Boolean (true of false)
MemberBusyAlwd Boolean (true or false)
QueueSize LCP-CTS R3.0 Integer(0-512)
DoQueue LCP-CTS R3.0 Indicates if queue will be used.
Boolean(true or false)
QueueMembers LCP-CTS R3.0 Indicates whether calls to MLHG group members will be
placed in the queue.
Boolean(true or false)
QueuedTreatment LCP-CTS R3.0 'SILENCE','RINGING','AUDIO'
InitialTreatmentId LCP-CTS R3.0 Initial treatment played to the caller
0, 2000-3999. 0 means not set
SubsequentTreatmentId LCP-CTS R3.0 Subsequent treatment played to the caller
0001)
Assigned Indicates if the feature is assigned.
Boolean (true or false)
PerPuid Indicates if the service data should NOT be derived
from the Primary PUID.
43 MultipleRingPattern
This feature is Per PUID. This feature allows a subscriber to choose a distinctive ring.
44 NuisanceCallTrace
This feature is Per Party. This feature is a public safety feature that allows a telephone company to identify the
unknown orginator of a call.
Group
45 OneDigitSpeedDial
This feature is Per Party.
[+0-9\*#]*
LCP-CTS R6.1 From CTS R6.1:
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$']*
LCP-CTS R6.2 From CTS R6.2:
If Support Big Address is true, the range of DN is
(0-252)
46 PSIServer
This feature is Per Party. All the parameters are required.
PSI_AS_ORIGINATOR
PromptUser Boolean (true or false)
PublicUID The PUID that this record is for.
Same format as parameter PrimaryPUID in SubParty
Group
47 RemoteAccessServer
This feature is Per Party. Provides a remote access service, querying a subscriber for number to access and PIN
and then allowing changes in the subscriber-alterable options for that number.
48 RemoteAccessServices
This feature is Per Party. This feature allows a subscriber, when away from their phone, to dial an access number
and then dial service codes as if they were calling from their own phone.
49 RemoteUser
This feature is Per Party. All the parameters are required.
50 RingbackWhenFree
This feature is Per Party. When a subscriber receives a busy signal after dialing a phone number, this service can
be invoked to monitor the called party and place a call once the called party becomes available.
51 SelectiveCallAcpt
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true,
this feature can be assigned per PUID, if false this feature is Per Party. Accept only calls that match the selection
criteria specified by the user; otherwise, the calls are routed to an announcement prompting for an override PIN
(think password). Calls failing the PIN check get forwarded to the specified number or to voice mail. Selective
DNs (1-32) are the DNs to compare with.
FORWARD_TO_DN
FORWARD_TO_VM
FORWARD_TO_ATTND
Boolean(true or false)
Default: false (In this case, the call will be handled as
specified by the Forwarding controls.)
_\.!~\*%\?\*]*
At least one of the SelectiveDNs is required when
Activated is true.
52 SelectiveCallFwd
This feature is Per PUID. Forward the incoming call only if it matches selection criteria. This feature allows a
subscriber to forward an incoming call if the calling party is on the subscriber's selective call forwarding list
(i.e., the 32 DNs).
Boolean(true or false)
Default: false
PinRequired LCP-CTS R5.0 Boolean(true or false)
Default false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
NoAnswerTimeout LCP-CTS R6.0 Integer range 2 to 60
Default 10
ScfType LCP-CTS R6.0 Valid values:
UNCONDITIONAL,
BUSY ,
NORESPONSE ,
UNREACHABLE
Default UNCONDITIONAL
SelectiveDN1 List of Directory Numbers that can forward.
_\.!~\*%\?\*]*
53 SelectiveCallRejct
This feature is Per PUID. This feature is affected by MSN Capability in Subparty. If MSN Capability is true, this
feature can be assigned per PUID, if false this feature is Per Party. Reject calls that match the selection criteria
specified by the user; otherwise, the calls are accepted.
String(1-4000)
Format as:
SelectiveDN1^ privateInd^ timestamp^` SelectiveDN2^
privateInd^ timestamp^` SelectiveDN3^ privateInd^
timestamp^`......
54 SeqRinging
This feature is Per PUID.
Boolean(true or false)
Default: false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
Activated Indicates if the subscriber has activated the feature.
55 SimultaneousRinging
This feature is Per PUID. This feature allows a subscriber to supply a set of numbers that are all called
simultaneously when a
String (0-32)
[+0-9a-zA-Z(),':@&=\|\-_\.!~\*%#]*
LCP-CTS R5.0 From CTS R5.0:
[+0-9a-zA-Z:@&=!,\-_\.!~\*'()%]*
LCP-CTS R6.1 From CTS R6.1:
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
56 TransferToUsersVM
This feature is Per Party. All the parameters are required.
57 TwoDigitSpeedDial
This feature is Per Party.
[+0-9\*#]*
LCP-CTS R6.1 From CTS R6.1:
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$']*
LCP-CTS R6.2 From CTS R6.2:
If Support Big Address is true, the range of DN is
(0-252)
58 VoiceMail
This feature is Per Party. This feature allows a subscriber Voice Mail.
String (0-32)
[+0-9a-zA-Z(),':@&=\|\-_\.!~\*%#]*
LCP-CTS R5.0 From CTS R5.0:
[+0-9a-zA-Z:@&=!,\-_\.!~\*'()%]*
LCP-CTS R6.1 From CTS R6.1:
String (0-252)
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
59 WebPortal
This feature is Per Party. This feature allows a subscriber to use the web portal services.
60 AdjunctTerminating
This feature is Per PUID. Added for LCP-CTS R5.0 and later!
61 SelectiveAlert
This feature is Per Party.
DN characters:
[+0-9a-zA-Z:@&=!,\-_\.!~\*'()%]*
LCP-CTS R3.0 From CTS R3.0:
[+0-9a-zA-Z:@&=!,\-_\.!~\*\?'()%]*
LCP-CTS R5.0 From CTS R5.0:
[+0-9a-zA-Z(),':@&=\|\-_\.!~\*%\?\*]*
LCP-CTS R6.1 From CTS R6.1:
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
62 ShortCodeTranslate
This feature is Per Party.
63 InhibitIncomingFwd
This feature is Per PUID.
64 BearerBasedCallFwd
This feature is Per Party.
65 TimeOriginatedRC
This feature is Per Party.
66 ReminderCall
This feature is Per Party.
Integer ( 6-120)
Default: 0
PerPuid Indicates if the service data should NOT be derived
from the Primary PUID.
67 SetTZPath
This feature is Per Party.
Africa/Cairo
Africa/Casablanca
Africa/Johannesburg
Africa/Lagos
Africa/Timbuktu
Africa/Tripoli
Africa/Windhoek
America/Adak
America/Anchorage
America/Buenos_Aires
America/Caracas
America/Chicago
America/Costa_Rica
America/Cuiaba
America/Denver
America/Godthab
America/Grand_Turk
America/Halifax
America/Havana
America/Indianapolis
America/Los_Angeles
America/Miquelon
America/New_York
America/Phoenix
America/Port-au-Prince
America/Santiago
America/Sao_Paulo
America/St_Johns
Asia/Anadyr
Asia/Aqtau
Asia/Aqtobe
Asia/Baku
Asia/Bangkok
Asia/Beirut
Asia/Bishkek
Asia/Calcutta
Asia/Dacca
Asia/Irkutsk
Asia/Jerusalem
Asia/Kabul
Asia/Kamchatka
Asia/Karachi
Asia/Katmandu
Asia/Krasnoyarsk
Asia/Magadan
Asia/Novosibirsk
Asia/Rangoon
Asia/Riyadh
Asia/Shanghai
Asia/Taipei
Asia/Tehran
Asia/Tokyo
Asia/Ulan_Bator
Asia/Vladivostok
Asia/Yakutsk
Asia/Yekaterinburg
Asia/Yerevan
Atlantic/Azores
Atlantic/Cape_Verde
Atlantic/South_Georgia
Atlantic/Stanley
Australia/Adelaide
Australia/Brisbane
Australia/Darwin
Australia/Hobart
Australia/Lord_Howe
Australia/Sydney
Europe/Bucharest
Europe/Istanbul
Europe/London
Europe/Minsk
Europe/Moscow
Europe/Paris
Europe/Riga
Europe/Samara
Europe/Simferopol
Europe/Warsaw
Pacific/Apia
Pacific/Auckland
Pacific/Chatham
Pacific/Easter
Pacific/Fiji
Pacific/Gambier
Pacific/Guadalcanal
Pacific/Honolulu
Pacific/Kiritimati
Pacific/Marquesas
Pacific/Norfolk
Pacific/Noumea
Pacific/Pitcairn
Pacific/Rarotonga
Pacific/Tongatapu
68 MobileDMS
This feature is Per Party.
69 MLPP
This feature is Per Party.
70 MusicOnHold
This feature is Per PUID. Either the cfgIndex or the TreatmentId should be provided.
Primary PUID).
71 SelNomadicBlocking
This feature is Per Party.
72 MiRingback
This feature is Per PUID.
73 AutoDial
This feature is Per Party. Added for LCP-CTS R4.0 and later!
String (0-32)
[+0-9a-zA-Z(),':@&=\|\-_\.!~\*%#]*
LCP-CTS R5.0 From CTS R5.0:
[+0-9a-zA-Z:@&=!,-_.!~*'()%]*
LCP-CTS R6.1 From CTS R6.1:
String (0-252)
[+0-9a-zA-Z:@&=,|-_.!~*'()%#?/$][]*
AcceptDigits LCP-CTS R4.0 If Hotline, indicates if accept dialed digits.
74 CallForwardDefault
This feature is Per PUID. Added for LCP-CTS R4.0 and later! Call Forwarding Default (Subscriber Feature)
[+0-9a-zA-Z:@&=,\|\-_\.!~\*'()%#?/$\]\[]*
Boolean(true or false)
PinRequired LCP-CTS R5.0 Boolean(true or false)
Default false
Send181Mode LCP-CTS R5.0 Valid value:
TAS_181_NONE
TAS_181_NO_FWINFO
TAS_181_WITH_FWINFO
NoAnswerTimeout LCP-CTS R4.0 Timeout for answer in seconds.
Integer (2-32)
LCP-CTS R6.1 From CTS R6.1
Integer (2-60)
Default 10
Activated LCP-CTS R4.0 Indicates if the subscriber has activated the feature.
75 CCBS
This feature is Per Party. Added for LCP-CTS R4.0 and later!
76 BlockCCBS
This feature is Per PUID. Added for LCP-CTS R4.0 and later!
77 AINFeatcodeTrigger
This feature is Per PUID. Added for LCP-CTS R4.0 and later!
78 AINOHDTrigger
This feature is Per PUID. Added for LCP-CTS R4.0 and later!
79 AINPDPcodeTrigger
This feature is Per PUID. Added for LCP-CTS R4.0 and later!
80 AINTATTrigger
This feature is Per PUID. Added for LCP-CTS R4.0 and later!
81 GLSAccess
This feature is Per Party. Added for LCP-CTS R4.1 and later!
82 Metering
This feature is Per Party. Added for LCP-CTS R6.1 and later!
83 SharedNumber
This feature is Per Party. Added for LCP-CTS R4.1 and later!
Activated LCP-CTS R4.1 Indicates if the subscriber has activated the feature.
84 AutoAttendant
This feature is Per Party. Added for LCP-CTS R5.0 and later!
85 OutgoingCallBarring
This feature is Per PUID. Added for LCP-CTS R5.0 and later! This feature is affected by MSN Capability in
Subparty. If MSN Capability is true, this feature can be assigned per PUID, if false this feature is Per Party.
86 RDigitParms
This feature is Per Party. Added for LCP-CTS R5.0 and later!
87 TransitRouting
This feature is Per Party. Added for LCP-CTS R6.0 and later!
String (0-63)
[0-9a-zA-Z:\-_\.]*
Assigned LCP-CTS R6.0 Indicates if the feature is assigned.
88 PinService
This feature is Per PUID. Added for LCP-CTS R6.1 and later!
PerPuid LCP-CTS R6.1 Indicates if the service data should NOT be derived
from the Primary PUID(Always set to false for
Primary PUID).
89 LocationNumber
This feature is Per Party. Added for LCP-CTS R6.0 and later!
90 FemtoBSR
This feature is Per Party. Added for LCP-CTS R6.0 and later!
91 GeneralReset
This feature is Per Party. Added for LCP-CTS R6.0 and later!
92 UseHoldAnnouncement
This feature is Per Party. Added for LCP-CTS R7.0 and later!
93 WholeSale
This feature is Per Party. Added for LCP-CTS R6.1 and later!
94 SpareService
This feature is Per Party. Added for LCP-CTS R6.1.1 and later! Note: This service is not a real service. The fields
in this service will be used in other existing service in the future. And the data are not stored in FS5K database.
95 VPNDialingAndDisplay
This feature is Per Party. Added for LCP-CTS R7.1.1 and later! VPN Dialing and Display
Range:
0 - 65535
Default: 0
UseVpnNumber LCP-CTS R7.1.1 Controls whether or not the CTS will query the GLS
on a call termination to map the received full calling
party identity to an abbreviated form to display to the
called party. If set to "No", there will not be a query
and the calling party identity as received in the
INVITE is displayed. Note that this parameter is only
significant when the "Use VPN Numbers for Caller
ID" in the CTS Profile table is set to "Per
-Subscriber".
Range:
true
false
Default: false
PdpEscape LCP-CTS R7.1.1 Used to signal that VPN dialing translations are not to
be attempted and GLS query is skipped. When a call is
originated from an inter-group member or PSTN, the dial
code is pre-pended to the calling party ID string. If
this parameter is not blank, it can not be equal to Escape
to VPN Dial Code.
Range:
Length: string of 1 to 5 characters.
Valid characters: digits 0-9, *, # or blank
Default: [blank]
VpnDialCode LCP-CTS R7.1.1 Used to distinguish intra-group dialing from intra-VPN
(but inter-group) dial patterns. This is needed only for
CPEs which can not support complicated digit map to support
both VPN and intra local dialing. If this parameter is
not blank, it can not be equal to PDP Escape to
POTS Dial Code.
Range:
Length: string of 1 to 5 characters.
Valid characters: digits 0-9, *, # or blank
Default: blank
QueryOnNoE164 LCP-CTS R7.1.1 Allows a GLS query to be invoked without provisioning
the PDP or Prefix table. A GLS query is
automatically triggered after E.164 if there was no match
in the E.164 table.
Range:
true
false
Default: true
IncludePdpEsc LCP-CTS R7.1.1 Determines whether or not to include the PDP Escape to
POTS Dial Code to the caller ID. If set to "true", the
terminating CTS will check the provisioned PDP
Escape to POTS Dial Code. If it is not blank, the
value will be pre-pended to the full number in the
P-Asserted-ID or From header accordingly.
Range:
true false
Default: false
VpnNumsForConnNum LCP-CTS R7.1.1 Determines whether the P-Asserted-ID in 200OK is
replaced with a VPN number for calls connected to an
intra VPN member.
Range:
true
false
Default: false
TermQueryIntraGroup LCP-CTS R7.1.1 Whether to perform terminating query when:
"Yes".
Range:
true
false
Default: false
VpnLcr LCP-CTS R7.1.1 Perform a VPN query to check for a Least Cost
Routing path. The query result will alter the target
domain to change the call routing.
Range:
true
false
Default: false
VpnIcr LCP-CTS R7.1.1 Perform a VPN query to check for a Least Cost
Routing path. The query result will alter the target
domain to change the call routing.
Range:
true
false
Default: false
E.1 lcm-apbsyncservice(rtrv,ent,ed,dlt)
This sets up the Phone Book Sync service.
CharSet: No Limit
Length: 255
SecondaryHostPort The SSL port number of the secondary server.
(opt for ent,opt for ed)
Integer(0-65535)
XcapRoot Root directory of XCAP resources on the Active Phone
(req for ent,opt for ed) Book server.
CharSet: No Limit
Length: 255
SyncPollInterval Sync polling interval.
(opt for ent,opt for ed) (0-14400) seconds
E.2 lcm-authenticationservice(rtrv,ent,ed,dlt)
This sets up the Authentication service.
CharSet: No Limit
Length: 255
LdapPort The port the LDAP server uses for communication.
(opt for ent,opt for ed)
Integer(1-65535)
389 is the default port number
SearchBase The base object in the LDAP server for searches.
(req for ent,opt for ed)
String(1-128)
E.3 lcm-loggingservice(rtrv,ent,ed,dlt)
This sets up the Logging service.
String(1-255)
Password Password to access the call logs.
(req for ent,opt for ed,na for rtrv) String(1-255)
Enabled Check mark box to define if the logging service is
(opt for ent,opt for ed) enabled.
Boolean(true of false)
AggregateStatus The aggregate of the status for the call log service
(na for ent,na for ed) across all application servers.
E.4 lcm-messagingservice(rtrv,ent,ed,dlt)
This sets up the Messaging service.
String(0-36)
VmsRetrieveFromNum The telephone number used to retrieve messages from the
(opt for ent,opt for ed) voice mail system.
String(0-36)
Vendor The vendor of the messaging system that provides the
(opt for ent,opt for ed) message service.
SsoUrl The URL to provide single sign on to the voice mail web
(opt for ent,opt for ed) interface. (only valid for the AnyPath).
E.5 lcm-searchservice(rtrv,ent,ed,dlt)
This sets up the Search service.
String(1-128)
ServerName The FQDN of the LDAP server that is used to
(req for ent,opt for ed) retrieve the authentication information.
String(1-255)
Port The port of the LDAP server used for communication.
(opt for ent,opt for ed)
Integer(1-65535)
389 is the default port number
SearchBase The base object used in the LDAP server for searches.
(req for ent,opt for ed)
String(1-128)
BindName The account password to access the LDAP server.
(opt for ent,opt for ed)
String(0-128)
Password The account password to access the LDAP server.
(opt for ent,opt for ed,na for rtrv)
String(0-128)
DnFormat The format used to store phone numbers in this LDAP.
(opt for ent,opt for ed) The format is expressed as a string where 'x' is
substituted for any digit.
E.6 lcm-skinservice(rtrv,ent,ed,dlt)
This sets up the Skin service.
SkinURL The URL for the skin definition jar file used on the
(req for ent,opt for ed) Lucent CM user client.
String(1-255)
Begin with http:// or https:// or file://
SplashURL The URL for the splash screen definition jar file used
(req for ent,opt for ed) on the Lucent CM user client.
String(1-255)
Begin with http:// or https:// or file://
Boolean(true or false)
LogoURL The URL for the logo that displays on the Lucent CM
(req for ent,opt for ed) user client main window.
String(1-255)
Begin with http:// or https:// or file://
String(1-255)
Begin with http:// or https:// or file://
ProxyHost Host name of the proxy server that is used to access the
(opt for ent,opt for ed) skin related URLs.
String(0-255)
ProxyPort Port number of the proxy server that is used to access the
(opt for ent,opt for ed) skin related URLs.
Integer(0-65535)
E.7 lcm-partition(rtrv,ent,ed,dlt)
This sets up a user Partitions.
Integer(0,1)
CreationDate The partition creation time stamp.
(na for ent,na for ed) Only for rtrv.
SessionDuration The maximum amount of time a user client can be idle
(req for ent,opt for ed) before a new session must be established for communication.
Integer(1-20160) minutes
PropertiesURL A URL that replaces the Lucent CM Explorer text
(opt for ent,opt for ed) strings with a different set of text strings.
Admin.properties
Error.properties
Web.properties
The default value is the Properties URL parameter of
the Lucent CM system.
String(0-255)
Begin with http:// or https:// or file://
String(0-255)
Begin with http:// or https:// or file://
PluginLogoURL String(0-255)
(opt for ent,opt for ed) Begin with http:// or https:// or file://
PluginProductName String(0-36)
(opt for ent,opt for ed)
DnFormat The format in which directory numbers are displayed in the
(opt for ent,opt for ed) Lucent CM user client.
String(0-36)
TimeDateLocaleExt The format in which the time and date is displayed in the
(opt for ent,opt for ed) Lucent CM user client.
Valid value:
en AU(Australia), de AT(Austria), fr BE(Belgium),
pt BR (Brazil), en CA (Canada), fr CA (Canada
French), zh CN (Chinese Simplified), zh TW (Chinese
Traditional), da DK (Denmark), fi FI (Finland), fr
FR (France), de DE (Germany), id ID (Indonesia), it
IT (Italy), ja JP (Japan), ml MY (Malaysia), es MX
(Mexico), nl NL (Netherlands), pl PL (Poland), ko
KR(Republic of Korea), ru RU (RussiaFederation), es
ES (Spain), sv SE (Sweden), ar AE (United Arab
Emirates), en GB (United Kingdom), en US (United
States), es US (United States-Spanish).
Integer(0-2147483647)
E.8 lcm-lpscalllogpackage(rtrv,ent,ed,dlt)
This sets up a Call Log package.
Integer(1-1000) default 1
E.9 lcm-lpsauthpackage(rtrv,ent,ed,dlt)
This sets up an LCM Authorization package.
Integer(-1, 1)
CannotBeReverse Prevents a user's password using the reverse order of
(opt for ent,opt for ed) characters used in the most recent password.
Integer(-1, 1)
MustContainAtLeastNum The minimum number of digits that must be include in the
(opt for ent,opt for ed) password.
Once the login attempts are disabled, the user must wait
for the specified time period before trying to login again.
Integer(-1, 1)
E.10 lcm-callservice(rtrv,ent,ed,dlt)
This sets up a FS5000 Call Service.
String(1-36) [0-9a-zA-Z_\.\-@]
AccountPassword Password for the system administrator account.
(req for ent,req for ed)
String(1-80)
HostPort Host port of the CTS call server.
(req for ent,req for ed) Integer(1-65535)
Quarantined LCM R6.3.1 Indicated if this call server is quarantined.
(opt for ent,na for ed)
Boolean(true or false)
AggregateStatus LCM R6.3.1 The connection status of CTS call server.
(opt for ent,opt for ed)
Valid value: ALL CONNECTED, SOME
CONNECTIONS DOWN, ALL DISCONNECTED.
PsiProtectionCs LCM R6.3.1 The PSI Protection Call Server of this call server.
(opt for ent,opt for ed)
String 1-36, all characters except for ^(caret), `(back
tick?), '(single quote), "(double quote), <(lt), >(gt)
String(1-36)
PlexViewPassword LCM R6.3.1 Password for the system administrator account
(opt for ent,opt for ed)
String(1-64)
PlexViewEnabled LCM R6.3.1 This enables communications to the OMC-P, needed for
(opt for ent,opt for ed) Partition Administration capabilities. Boolean(true or
false)
E.11 lcm-dialingrulespackage(rtrv,ent,ed,dlt)
This sets up a Dialing Rules package.
String(0-6) [0-9\*]
NanpEnabled Defines if North American Number Plan is used.
(opt for ent,opt for ed)
Boolean(true or false) default true
OutsideAccessCode The digit or digits to dial out of this location to the
(opt for ent,opt for ed) public network.
String(0-6) [0-9\*]
TrunkPrefix The dialing digits to dial outside the home/local area
(opt for ent,opt for ed) code in the same country.
String(0-4) default 1
InternationalPrefix The dialing digits to access the automatic outgoing
(opt for ent,opt for ed) international equipment in the originating country.
String(0-128) [0-9,\-xX\r\n]
DigitsDialedInPartition The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within partition.
Integer(2-10) default 4
DigitsDialedInNPA The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within the home/local area code.
Integer(4-11) default 7
DigitsDialedInCountry The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within the country.
Integer(6-15) default 10
InRule1 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 1
String(0-36) [0-9xXnN\-()\[\]?\*#+ ,]
InRule2 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 2
InRule3 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 3
InRule4 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 4
InRule5 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 5
InRule6 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 6
InRule7 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 7
InRule8 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 8
InRule9 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 9
InRule10 For LCM R6.3.3 and before
(opt for ent,opt for ed) Incoming phone number translation rule 10
OutRule1 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 1
String(0-36) [0-9xXnN\-()\[\]?\*#+ ]
OutRule2 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 2
OutRule3 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 3
OutRule4 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 4
OutRule5 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 5
OutRule6 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 6
OutRule7 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 7
OutRule8 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 8
OutRule9 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 9
OutRule10 For LCM R6.3.3 and before
(opt for ent,opt for ed) Outgoing phone number translation rule 10
InRule LCM R6.3.4 Incoming phone number translation rule
(opt for ent,opt for ed) String(0-4000) [0-9xXnN\-()\[\]?\*#+ ]
Format as InRule1|InRule2|InRule3|...
The max length of InRule(x) is 36.
OutRule LCM R6.3.4 Outgoing phone number translation rule
(opt for ent,opt for ed) String(0-4000) [0-9xXnN\-()\[\]?\*#+ ]
Format as OutRule1|OutRule2|OutRule3|...
E.12 lcm-feature(rtrv,ent,ed,dlt)
This sets up a feature code.
E.13 lcm-featurepackage(rtrv,ent,dlt)
This sets up a Feature package.
E.14 lcm-group(rtrv,ent,ed,dlt)
This sets up a user Group.
Boolean(true or false)
PresenceService The Presence Service Id
(req for ent,req for ed)
PartitionSearch Whether or not group members can search the partition
(req for ent,req for ed) information
Boolean(true or false)
NotifySubjectPhrase String(0-32)
(opt for ent,opt for ed)
NotifyBodyPhrase String(0-32)
(opt for ent,opt for ed)
APBSyncService The APB Sync Service Id or PS Contact service id
(req for ent,req for ed)
AuthenticationService The Authentication Service Id
(req for ent,req for ed)
LpsAuthPackage The LPS Auth Package Id
(req for ent,req for ed)
LoggingService The Logging Service Id
E.15 lcm-displaygroup(rtrv,ent,ed,dlt)
This sets up an LCM Display Group.
String(1-36)
[0-9a-zA-Z+_]
DisplayQueueSize only for that the display group is MLHG
(opt for ent,opt for ed) Boolean(true or false)
E.16 lcm-user(rtrv,ent,ed,dlt)
This sets up an LCM User.
Role Integer(1-3)
(opt for ent,opt for ed) Integer, 1 is for Partition Administrators with Full
Administration, 2 is for standard Users, and 3 is for
Partition Administrators with Password Reset only
privileges.
String(6-80)
Boolean(true or false)
AccountActive LCM R6.3.1 When clear, this prevents user from logging in and the
(opt for ent,opt for ed) user is suspended at the CTS
String(1,36)
ApbListName The name of the master list on the Active Phone Book
(opt for ent,opt for ed) server that is used to synchronize the personal address
book for the user. Same as PS Contact List Id
String(1,36)
ApbServiceId The name of the APB service.
(opt for ent,opt for ed) Same value as APBSyncService in LCM Group
AssociatedUserData Any associated users that can be accessed by, or access
(opt for ent,opt for ed) this user.
Auth_serviceType Integer(1,2)
(req for ent,opt for ed) The authentication service type LCM (1) or LDAP
(2).
Auth_serviceID The lps auth service id.
(opt for ent,opt for ed) String 1-36, all characters except for ^(caret), -(dash),
`(back tick?), '(single quote), "(double quote), <(lt),
>(gt)
String(1-255)
LoggingPackageId The Logging package name.
(opt for ent,opt for ed) String(1,36)
Cs_privilegeLevel Allow users that are not the primary public ID to update
(opt for ent,opt for ed) common features.
1 or 0 (true or false)
Cs_servicePointID The users CTS Party ID.
(req for ent,opt for ed) String(1-36)
Cs_serviceId Call Server ID (name of the CTS)
(opt for ent,opt for ed)
CallServerPublicIds The telephone number(s) for the user, in the form
(req for ent,opt for ed) "number^number^"
DisplayGroupList The list of display groups that this user is assigned, the
(opt for ent,opt for ed) list is made up of group data which is separated by a '|'
and the group data is in the form of
partionid^
displayGroupId^
displayGroupType (1-4)^
monitor(Boolean)^
member(Boolean)
EmailId The E-mail identifier that is used to identify the user
(opt for ent,opt for ed) at the message server.
String(1-255)
AuthenticationId The authentication id used to access the IMAP store -
(opt for ent,opt for ed) can be different from email
String(1-255)
Msg_serviceId The message service id
(opt for ent,opt for ed) String(1-36)
DNExtPSIPkgId LCM R6.2.1 The PSI DN Extension Server package
(opt for ent,opt for ed) PSI package name, String(0,36)
RASPSIPkgId LCM R6.2.1 The PSI Remote User Server package
(opt for ent,opt for ed) PSI package name, String(0,36)
Cs_protServiceId If Cs_protServiceId is not specified, then the
(opt for ent,opt for ed) protection call server is determined by looking up the
AlternateFsdbFqdn of the subparty that corresponds to the
lcm user (see Cs_servicePointID).
This lookup guarantees that the lcm user and ngfs subparty
have consistent protection call server information.
E.17 lcm-userfeature(rtrv,ent,dlt)
This sets up User features.
E.18 lcm-userfeaturepackage(rtrv,ent,ed,dlt)
This sets up User feature package.
E.19 lcm-psipackage(rtrv,ent,ed,dlt)
This sets up an LCM PSI package.
>(gt)
E.20 lcm-presenceservice(rtrv,ent,ed,dlt)
This sets up an LCM Presence Service.
PrimarySIPURI String(1-255)
(req for ent,req for ed)
PrimaryHost String(1-255)
(req for ent,req for ed)
PrimaryPort Integer(1-65535)
(req for ent,req for ed)
SecondarySIPURI String(0-255), optional
(opt for ent,opt for ed)
SecondaryHost String(0-255), optional
(opt for ent,opt for ed)
SecondaryPort Integer(0-65535), optional
(opt for ent,opt for ed)
SubscribeInterval Integer(0-999999999) default 3600
(req for ent,req for ed)
LcmSIPHostName String(0-255)
LCM R6.3.3 Deprecated in LCM R6.3.3
LcmSIPPort Integer(1-65535) default 5060
E.21 lcm-notificationservice(rtrv,ent,ed,dlt)
This sets up an LCM Notification Service.
F.1 pcm-messagingservice(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up the Messaging service.
now.
SsoUrl PCM R7.0 The URL to provide single sign on to the voice mail web
(opt for ent,opt for ed) interface. (only valid for the AnyPath).
F.2 pcm-omcpservice(rtrv,ent,ed,dlt)
Added for PCM R7.1.1 and later! New OMC-P Service in PCM
F.3 pcm-glsservice(rtrv,ent,dlt)
Added for PCM R7.1.1 and later!
F.4 pcm-lpsauthpackage(rtrv,ed)
Added for PCM R7.1.1 and later!
F.5 pcm-callservice(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a FS5000 Call Service.
String(1-36) [0-9a-zA-Z_.-@]
AccountPassword PCM R7.0 Password for the system administrator account.
(req for ent,req for ed,na for rtrv)
String(1-80)
HostPort PCM R7.0 Host port of the CTS call server.
(req for ent,req for ed) Integer(1-65535)
ICscfHost PCM R7.0 I-CSCF URI for Call Server. String(1-64)
(req for ent,opt for ed)
Quarantined PCM R7.0 Indicated if this call server is quarantined.
(opt for ent,na for ed)
Boolean(true or false)
AggregateStatus PCM R7.0 The connection status of CTS call server.
(opt for ent,opt for ed)
Valid value: ALL CONNECTED, SOME
CONNECTIONS DOWN, ALL DISCONNECTED.
PsiProtectionCs PCM R7.0 The PSI Protection Call Server of this call server.
(opt for ent,opt for ed)
String(1-36)
PlexViewPassword PCM R7.0 Password for the system administrator account
(opt for ent,opt for ed,na for rtrv)
String(1-64)
PlexViewEnabled PCM R7.0 This enables communications to the OMC-P, needed for
(opt for ent,opt for ed) Partition Administration capabilities. Boolean(true or
false)
F.6 pcm-displaygroup(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM Display Group.
String(1-36)
[0-9a-zA-Z+_]
DisplayQueueSize PCM R7.0 Boolean(true or false)
(opt for ent,opt for ed)
AdminAccountId PCM R7.0 This id is the enterprise admin# login id, designed for
(opt for ent,opt for ed) log purpose only for PCM. OMC-P just forwards this
id to PCM to log it. The northbound boss can just
ignore this field.
F.7 pcm-psipackage(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up an PCM PSI package.
F.8 pcm-presenceservice(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM Presence Service.Will support in next release as PCM does
not support currently
F.9 pcm-pabservice(rtrv,ent,ed,dlt)
Added for PCM R7.1.1 and later!
F.10 pcm-notificationservice(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM Notification Service
F.11 pcm-enttopology(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM Topology
MsgServiceId PCM R7.0 The Messaging Service Id, can not be modified.
(req for ent,req for ed)
PrimaryCtsId PCM R7.0 The Primary Call Service Id
(req for ent,req for ed)
ProtectionCtsId PCM R7.0 The Protection Call Service Id
(opt for ent,opt for ed)
PsServiceId PCM R7.0 The Presence Service Id
(opt for ent,opt for ed)
PabServiceId PCM R7.1.1 Pab Service Id
(opt for ent,opt for ed)
NotificationServiceId PCM R7.0 The Notification Service Id
(req for ent,req for ed)
DNExtPSIPkgId PCM R7.0 The PSI DN Extension Server package
(req for ent,req for ed)
F.12 pcm-entpartition(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a user Partitions
PartitionName+"-"+PartitionIntId, PartitionIntId is
a five leng digit number returned by PCM..
String(0-36)
TimeDateLocaleExt PCM R7.0 The format in which the time and date is displayed in the
(req for ent,req for ed) Personal CM user client.
Valid value:
en AU(Australia), de AT(Austria), fr BE(Belgium),
pt BR (Brazil), en CA (Canada), fr CA (Canada
French), zh CN (Chinese Simplified), zh TW (Chinese
Traditional), da DK (Denmark), fi FI (Finland), fr
FR (France), de DE (Germany), id ID (Indonesia), it
IT (Italy), ja JP (Japan), ml MY (Malaysia), es MX
(Mexico), nl NL (Netherlands), pl PL (Poland), ko
KR(Republic of Korea), ru RU (RussiaFederation), es
ES (Spain), sv SE (Sweden), ar AE (United Arab
Emirates), en GB (United Kingdom), en US (United
States), es US (United States-Spanish).
EnterpriseId PCM R7.0 The enterprise int id, 5 digit leng, returned by PCM.
(opt for ent,opt for ed)
BillingId PCM R7.0 Five digit leng billing ID, can be given by OMC-P or
(opt for ent,opt for ed) else will be returned by PCM.
TemplateId PCM R7.0 The Feature Template Id .
(opt for ent,opt for ed) Only take effect when IsEnterprise is true.
SlaId PCM R7.0 Service Level Agreement ID. Only take effect when
(opt for ent,opt for ed) IsEnterprise is true.
BillingRequried PCM R7.0 Boolean value. True to enable billing for uses in this
(req for ent,req for ed) partition, else disable.
PartitionEnabled PCM R7.0 Boolean value. Ture to enable this partition, else
(req for ent,req for ed) disable.
HasFeaturePool PCM R7.0 Boolean value. Always true when this is an enterprise
(req for ent,req for ed) partition.
HasUserPool PCM R7.0 Boolean value. Always true when this is an enterprise
(req for ent,req for ed) partition.
LicenseLeft PCM R7.0 Left license numbers in this partition.
(na for ent,na for ed)
Formate as 2^Value|16^Value|32^Value
Value: integer. Autoattendant feature related, 2 means
Consucer, 16 means Deluxe, 32 means Enterprise.
F.13 pcm-entsubpartition(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a user sub Partition. May be called by northbound boss or PCM
Enterprise admin client.
PartitionName+"-"+PartitionIntId, PartitionIntId is
a five leng digit number returned by PCM.
ParentPartitionId PCM R7.0 When adding a sub partition, this field determines where
(req for ent,opt for ed,na for rtrv) this parititon is located at. It is an interger id of
parent partition.
PartitionName PCM R7.0 String 1-36, all characters except for ^(caret), -(dash),
(req for ent,opt for ed) `(back tick?), '(single quote), "(double quote), <(lt),
>(gt)
PartitionType PCM R7.0 Alpha number, length 0~36.
(req for ent,req for ed)
PartitionLevel PCM R7.0 Alpha number, only available for rtrv.
(na for ent,na for ed) Returned by PCM.
CurrentUsers PCM R7.0 Alpha number, only available for rtrv.
(na for ent,na for ed) Returned by PCM.
CurrentPartitions PCM R7.0 Alpha number, only available for rtrv.
(na for ent,na for ed) Returned by PCM.
String(0-36)
TimeDateLocaleExt PCM R7.0 The format in which the time and date is displayed in the
(req for ent,req for ed) Personal CM user client.
Valid value:
en AU(Australia), de AT(Austria), fr BE(Belgium),
pt BR (Brazil), en CA (Canada), fr CA (Canada
French), zh CN (Chinese Simplified), zh TW (Chinese
Traditional), da DK (Denmark), fi FI (Finland), fr
FR (France), de DE (Germany), id ID (Indonesia), it
IT (Italy), ja JP (Japan), ml MY (Malaysia), es MX
(Mexico), nl NL (Netherlands), pl PL (Poland), ko
KR(Republic of Korea), ru RU (RussiaFederation), es
ES (Spain), sv SE (Sweden), ar AE (United Arab
Emirates), en GB (United Kingdom), en US (United
States), es US (United States-Spanish).
SlaId PCM R7.0 Service Level Agreement ID. Only take effect when
(opt for ent,opt for ed) IsEnterprise is true.
BillingRequried PCM R7.0 Boolean value. True to enable billing for uses in this
(req for ent,req for ed) partition, else disable.
PartitionEnabled PCM R7.0 Boolean value. Ture to enable this partition, else
(req for ent,req for ed) disable.
HasFeaturePool PCM R7.0 Boolean value. Always true when this is an enterprise
(req for ent,req for ed) partition. Else false.
HasUserPool PCM R7.0 Boolean value. Always true when this is an enterprise
(req for ent,req for ed) partition. Else false.
LicenseLeft PCM R7.0 Left license numbers in this partition.
(na for ent,na for ed)
Formate as 2^Value|16^Value|32^Value
Value: integer. Autoattendant feature related, 2 means
Consucer, 16 means Deluxe, 32 means Enterprise.
AdminAccountId PCM R7.0 This id is the enterprise admin's login id, designed for
(opt for ent,opt for ed) log purpose only for PCM. OMC-P just forwards this
id to PCM to log it. The northbound boss can just
ignore this field.
CurrentVDDId PCM R7.1.1 VDD ID
(opt for ent,opt for ed)
FapId PCM R7.1.1 FAP ID
(opt for ent,opt for ed)
F.14 pcm-entfeaturepool(rtrv,ed)
Added for PCM R7.0 and later! This sets up a feature pool that the users in this partition can be assigned. There
is only one feature pool for everay partition, it is returned by PCM, OMC-P can only modify this default feature
pool
F.15 pcm-entfeaturetemplate(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM feature template for a partition.
DisplayName PCM R7.0 The descriptive name that displays in the Lucent CM
(req for ent,req for ed) Explorer tree view.
String(1-128)
ServerName PCM R7.0 The FQDN of the LDAP server that is used to
(req for ent,req for ed) retrieve the authentication information.
String(1-255)
DnFormat PCM R7.0 The format used to store phone numbers in this LDAP.
(req for ent,req for ed) The format is expressed as a string where 'x' is
substituted for any digit.
String(0-6) [0-9*]
String(0-6) [0-9*]
TrunkPrefix PCM R7.0 The dialing digits to dial outside the home/local area
(opt for ent,opt for ed) code in the same country.
String(0-4) default 1
InternationalPrefix PCM R7.0 The dialing digits to access the automatic outgoing
(opt for ent,opt for ed) international equipment in the originating country.
String90-128) [0-9,-xX\r\n]
DigitsDialedInPartition PCM R7.0 The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within partition.
Integer(2-10) default 4
DigitsDialedInNPA PCM R7.0 The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within the home/local area code.
Integer(4-11) default 7
DigitsDialedInCountry PCM R7.0 The number of digits that need to be dialed to make a
(opt for ent,opt for ed) call, either from within the country.
Integer(6-15) default 10
InRule PCM R7.0 Incoming phone number translation rule
(opt for ent,opt for ed) String(0-4000) [0-9xXnN-()[]?*#+ ]
Format as InRule1|InRule2|InRule3|......
Integer(-1, 1)
CannotBeReverse PCM R7.0 Prevents a user's password using the reverse order of
(req for ent,req for ed) characters used in the most recent password.
Integer(-1, 1)
MustContainAtLeastNum PCM R7.0 The minimum number of digits that must be include in the
(req for ent,req for ed) password.
CannotContainMoreThan PCM R7.0 The maximum number of characters allowed in the password.
(req for ent,req for ed)
Integer(-1, 1-100), default 20, but must more than the
value of MustContainAtLeastChars.
ExpiresIn PCM R7.0 The number of seconds the password remains valid.
(req for ent,req for ed)
Integer(-1, 0-31536000) default 2592000
WarnOfExpiration PCM R7.0 The number of seconds to warn the user that the user's
(req for ent,req for ed) password is about to expire. Once the specified number of
seconds before expiration is reached, the warning message
is sent each time the user logs in.
Once the login attempts are disabled, the user must wait
for the specified time period before trying to login again.
FailureAttemptDuration PCM R7.0 The number of seconds in which successive failures are
(req for ent,req for ed) counted. If the user fails to login and attempts to login
after this time period, if this second attempt fails, it is
considered the first failed attempt for the time period.
This will avoid locking out a user if failed attempts occur
over a series of days.
Integer(-1, 1)
SslEnabled PCM R7.0 Boolean value.
(req for ent,req for ed) True to enable SSL in Search service of this template,
else disable it.
F.16 pcm-entgroup(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up an PCM enterprise group.
F.17 pcm-entvddid(rtrv,ent,ed,dlt)
Added for PCM R7.1.1 and later! ent/ed/rtrv/dlt PCM VDDID Operation
F.18 pcm-entfap(rtrv,ent,ed,dlt)
Added for PCM R7.1.1 and later! Feature Assigned Template
F.19 pcm-entvddtuple(rtrv,ent,ed,dlt)
Added for PCM R7.1.1 and later! ent/ed/rtrv/dlt PCM VDDID Tuple
F.20 pcm-entsla(rtrv,ed)
Added for PCM R7.0 and later! This sets up the Service Level Agreement for an enterprise partition
Integer(1-20160) minutes
MaxUsers PCM R7.0 The maximum number of users that can be provisioned on
(req for ent,req for ed) this partition.
Integer(0-2147483647)
MaxEntGroup PCM R7.0 Maximum Enterprise Goup allowed to be created in this
(req for ent,req for ed) partition.
Integer(0-2147483647)
MaxPredefinedSettings PCM R7.0 Integer(0-100)
(req for ent,req for ed) Default 10
LicenseAllocated PCM R7.0 Allowed license users in this partition.
(req for ent,req for ed)
Formate as 2^Value|16^Value|32^Value
Value: integer. Autoattendant feature related, 2 means
Consucer, 16 means Deluxe, 32 means Enterprise.
MaxSubPartition PCM R7.0 The max sub partitions this partition can have.
(req for ent,req for ed)
Integer(0-2147483647)
MaxSubpartitionLevel PCM R7.0 The maximum sub partition level this partition can have.
(req for ent,req for ed)
Integer(0~20)
MaxVPNGroupTuples PCM R7.1.1 Integer (0-999999999)
(opt for ent,req for ed)
AdminAccountId PCM R7.0 This id is the enterprise admin's login id, designed for
(opt for ent,opt for ed) log purpose only for PCM. OMC-P just forwards this
id to PCM to log it. The northbound boss can just
ignore this field.
F.21 pcm-entadmin(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up a PCM Presence Service
F.22 pcm-entuser(rtrv,ent,ed,dlt)
Added for PCM R7.0 and later! This sets up an PCM User.
GroupId PCM R7.0 The enterprise group to which the user belongs.
(req for ent,opt for ed)
Optional for ed.
AlphaNumber(1-36),the pattern is
[0-9a-zA-Z_]
Password PCM R7.0 Portal login password. String (6-80). When user
(req for ent,opt for ed,na for rtrv) Auth_Package has User Authentication Enabled, password
length should not be 0. When user Auth_Package has User
Authentication Disabled, password length should be empty
(null).
Msg_EmailId PCM R7.0 The E-mail identifier that is used to identify the user
(opt for ent,opt for ed) at the message server.
String(1-255)
UserTag PCM R7.0 Pull down menu to define the type of user:
(opt for ent,opt for ed)
Family
Personal
Travel
Vacation
Work
Telework
Coworker
Superior
Assistant
Attendant
System Administrator
Partition Administrator
Tag01
Tag02
Tag03
Tag04
Tag05
Tag06
Tag07
Tag08
Tag09
Tag10
Boolean(true or false)
AccountActive PCM R7.0 When clear, this prevents user from logging in and the
(opt for ent,opt for ed) user is suspended at the CTS.
AccountDisabled PCM R7.0 This indicates if the account has been automatically
(opt for ent,opt for ed) locked based on the number of invalid login attempts. This
is cleared automatically when the account password is
reset.
PrimaryPublicId PCM R7.0 The telephone number(s) for the user. Only one
(req for ent,opt for ed) PrimaryPublicId for a PCM user.
String (1-32)
[+0-9a-zA-Z:,\-_\.()]*
IsAssigned PCM R7.0 Specify if Auto Attendant Assigned
(req for ent,opt for ed) Boolean(true or false)
CallServerPublicIds PCM R7.0 The telephone number(s) for the user, in the form
(req for ent,opt for ed)
"number^number^"
DisplayGroupList PCM R7.0 The list of display groups that this user is assigned, the
(opt for ent,opt for ed) list is made up of group data which is separated by a '|'
or ',' and the group data is in the form of
partionid^
displayGroupId^
displayGroupType (1-4)^
monitor(Boolean)^
member(Boolean)
AdminAccountId PCM R7.0 This id is the enterprise admin's login id, designed for
(opt for ent,opt for ed) log purpose only for PCM. OMC-P just forwards this
id to PCM to log it. The northbound boss can just
ignore this field.
The HTTP interface uses port 8080 and the HTTPS interface uses 8443. For example, the clear text OMC-P
URL would be:
http://135.185.52.30:8080/plxwebapi/api
https://135.185.52.30:8443/plxwebapi/api
Note: For more information beyond these instructions, see the Tomcat 5.0 documentation site on configuring
SSL:
http://tomcat.apache.org/tomcat-5.0-doc/ssl-howto.html
G.2 Instructions
1. Login to the OMC-P as root.
4. Choose a password and create the security certificate file by running the following command on the OMC-
P (replace <password> with your chosen password):
(This will prompt for the password again and additional descriptive information for the creation of the security
certificate.)
5. Edit the file $CATALINA_HOME/conf/server.xml to uncomment the SSL Connector. The following shows
the default setting:
Uncomment the <Connector/> by removing the <!-and --> surrounding the entry. Also, add the keystorePass
and keystoreFile attributes within the <Connector/> entry. The resulting entry should look as follows. (Use the
chosen password in place of <password>.)
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" debug="0" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" keystorePass="<password>"
keystoreFile="/opt/PlexView/PlexWebApi/.keystore" />
Note: At this point, both the clear text HTTP (port 8080) and the secure HTTPS (port 8443) are configured to
be allowed. If you want to disable the clear text HTTP, continue with step 6, otherwise, skip to step 7.
b. Next add the following entry just before the "Default Welcome File List" section
<security-constraint>
<web-resource-collection>
<web-resource-name>Automatic SSL Forwarding</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>
CONFIDENTIAL
</transport-guarantee>
</user-data-constraint>
</security-constraint>
7. For the configuration changes to take effect, it is necessary to stop then start the Web API.
The user dials a PSI to access the Remote User Service. The call is subsequently routed to a PSI Server. Based
on provisioned data for that PSI, the PSI Server collects the PUID and PIN and routes the call on to the STAS
associated with that PUID (to the associated Remote User Service)
The user calls are routed through a PSI Server, so a PSI Server must first be established. The PSI Server does
not need to be on the same FS as the Remote Users. All Remote Users can share this PSI Server. The PSI Server
must be provisioned to use a special PSI Service Profile.
Note: For each remote user, a PSI User must be provisioned. From the GUI, this step is automatically done. But
from SOAP, PSI User must be provisioned via SOAP command manually.
XML data session for assigning PSI Server feature( In this example, the PartyID is 886156000 with primary
puid 886156):
<PSIServer>
<CountryCode>2</CountryCode>
<PsiType>PSI_REMOTE_ACCESS</PsiType>
<PromptUser>true</PromptUser>
<PublicUID>886156</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</PSIServer>
2. The Remote User must be assigned the Remote User feature. Use ed-ngfs-subscriber-v2 command to assign
Remote User feature to the Remote User.
XML data session for assigning Remote User feature( In this example, the Remote User PartyID is 7777000
with primary puid 7777 and secondary puid 7778):
<RemoteUser>
<CallsAlwd>true</CallsAlwd>
<SubsequentAlwd>true</SubsequentAlwd>
<PublicUID>7777</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</RemoteUser>
3. For each remote user, a PSI User must be provisioned on the PSI Server. Use ent-ngfs-psiuser-v2 command
to provision PSI Users for each Remote User.
XML data session for provisioning PSI Users( In this example, two Remote Users 7777 and 7778 should be
provisioned for PartyID 7777):
<ngfs-psiuser-v2>
<aid>7777</aid>
<PrincipalDN>7777</PrincipalDN>
<Pin10 />
<PrimaryPuid>7777</PrimaryPuid>
</ngfs-psiuser-v2>
<ngfs-psiuser-v2>
<aid>7778</aid>
<PrincipalDN>7778</PrincipalDN>
<Pin10 />
<PrimaryPuid>7777</PrimaryPuid>
</ngfs-psiuser-v2>
The user dials a PSI to access the DN Extension feature. The call is subsequently routed to a PSI Server. Based
on provisioned data for that PSI, the PSI Server routes the call on to the STAS associated with that PUID with
DN Extension Server assigned.
The user calls are routed through a PSI Server, so a PSI Server must first be established. The PSI Server does
not need to be on the same FS as the Users. All DN Extension users can share this PSI Server. The PSI Server
must be provisioned to use a special PSI Service Profile.
Note: For each user a PSI Extension must be provisioned. From the GUI, this step is automatically done. But
from SOAP interface, PSI Extension must be provisioned via SOAP command manually. And besides the PSI
Extensions corresponding to each user, one dummy PSI Extension must be provisioned for the subscriber with
DN Extension Server feature.
the PSI Server feature with a PSI_EXTENSION type. Use ed-ngfs-subscriber-v2 command to assign a PartyID
with PSI Server feature, PsiType has value of PSI_EXTENSION.
XML data session for assigning PSI Server feature( In this example, the PartyID is 9999000 with primary puid
9999):
<PSIServer>
<CountryCode>132</CountryCode>
<PsiType>PSI_EXTENSION</PsiType>
<PromptUser>true</PromptUser>
<PublicUID>9999</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</PSIServer>
2. The DN Extension Server feature is assigned to the subscriber using Extension Server feature. Extension
Server feature is shared by DN Extension Server feature and Device Extension Server feature. DN Extensions
are provisioned in the ExtensionDataList. Use ed-ngfs-subscriber-v2 command to assign this feature.
XML data session for assigning DN Extension Server feature( In this example, the subscriber has primary puid
88615214. And DN extension User 113 is provisioned in the ExtensionDataList. ):
<ExtensionServer>
<ExtensionDataList>113^DN_EXTENSION^false^false^false</ExtensionDataList>
<DialVM>false</DialVM>
<PublicUID>88615214</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</ExtensionServer>
3. Each DN Extension User requires a PSI Extension to be provisioned on the PSI Server. Besides this, one
dummy PSI Extension must be provisioned for the subscriber with DN Extension Server feature. Use ent-ngfs-
psiextension-v2 command to provision PSI Extensions.
XML data session for provisioning PSI Extensions (In this example, one PSI Extension for DN Extension User
113 and one dummy PSI Extension dummy88615214 are required to be provisioned.):
<ngfs-psiextension-v2>
<aid>9999`113</aid>
<Pin10 />
<PrincipalDN>88615214</PrincipalDN>
<PsiPuid>9999</PsiPuid>
<ExtensionDN>113</ExtensionDN>
<PinReqd>false</PinReqd>
</ngfs-psiextension-v2>
<ngfs-psiextension-v2>
<aid>9999`dummy88615214</aid>
<Pin10 />
<PrincipalDN>88615214</PrincipalDN>
<PsiPuid>9999</PsiPuid>
<ExtensionDN>dummy88615214</ExtensionDN>
<PinReqd>false</PinReqd>
</ngfs-psiextension-v2>
If you want to change the secondary puid from "Use Individual Data" to "Use Data from Primary Public Id", you
need set the parameters both "Assigned" and "PerPuid" to "false" in the feature tag of secondary puid, then apply.
If you want to unassign this feature to this subscriber, you need set the parameter "Assigned" to "false" in the
feature tag of primary puid, and set the parameters both "Assigned" and "PerPuid" to "false" in the feature tag
of secondary puid, then apply.
Below is an example:
Step1, If you want to assign feature MultipleRingPattern to one subscriber, and set the secondary puid "Use Data
from Primary Public Id", you need run command ed-ngfs-subscriber-v2, the xml file should be:
<SubParty>
<DisplayName>1111</DisplayName>
<Category>SERVICEBUNDLE2</Category>
<PartyId>1111</PartyId>
<PrimaryPUID>1111</PrimaryPUID>
<PrimaryPUIDCPEProfileNumber>0</PrimaryPUIDCPEProfileNumber>
<PrimaryPUIDFlashable>false</PrimaryPUIDFlashable>
<AssocOtasRealm>stas-stdn.fs5000group0-000.fs5k4.ims.fs5000lab.com</AssocOtasRealm>
<CallLimit>2</CallLimit>
<ServiceSuspension>false</ServiceSuspension>
<AssocWpifRealm></AssocWpifRealm>
<IddPrefix></IddPrefix>
<AlternateFsdbFqdn></AlternateFsdbFqdn>
<SharedHssData>false</SharedHssData>
<PublicUID1>2222</PublicUID1>
<PublicUID2></PublicUID2>
<PublicUID3></PublicUID3>
<PublicUID4></PublicUID4>
<PublicUID5></PublicUID5>
<PublicUID6></PublicUID6>
<PublicUID7></PublicUID7>
</SubParty>
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>1111</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
Step 2, if you want edit this subscriber to the secondary puid "Use Individual Data", you need change the xml
file to (I omited the SubParty part):
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>1111</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>2222</PublicUID>
<Assigned>true</Assigned>
<PerPuid>true</PerPuid>
</MultipleRingPattern>
Step 3, now if you want to change the secondary puid back to "Use Data from Primary Public Id", the xml file
should be changed to:
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>1111</PublicUID>
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>2222</PublicUID>
<Assigned>false</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
Step 4, if you want to unassign this feature, and now the secondary puid is set to "Use Individual Data", the
xml file should be changed to:
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>1111</PublicUID>
<Assigned>false</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
<MultipleRingPattern>
<RingPattern>STANDARD</RingPattern>
<PublicUID>2222</PublicUID>
<Assigned>false</Assigned>
<PerPuid>false</PerPuid>
</MultipleRingPattern>
All the subscriber and services data will be provisioned both on the primary and the protection switch. Subscriber
Geo-redundancy was restricted to SubParty and Services data only (i.e., HSS data was excluded from being Geo-
Redundant). This is true for OMC-P Release 13.0 and before.
Starting with OMC-P 13.1, OMC-P support of Subscriber Geo-Redundancy was extended to include iHSS data
(HSS Private ID etc.). So, if HSSPrivateId and other HSS data is provided in the request, then that data gets
provisioned on the iHSS of both Primary and Protection switches. However unlike the SubParty and Services
data, HSS Data has to be specified two times. Primary HSS information is specified as before but Protection
HSS data should be specified under a new XML Element called <GeoRedundancyData>, as shown below.
<SubParty>
<DisplayName>John Doe</DisplayName>
<Category>SERVICEBUNDLE2</Category>
...
<AlternateFsdbFqdn>135.2.117.7</AlternateFsdbFqdn>
</SubParty>
<DialingPlan>
<PrefixandFeatureCode>0</PrefixandFeatureCode>
...
<Assigned>true</Assigned>
<PerPuid>false</PerPuid>
</DialingPlan>
<HSSPrivateId>
<PrivPassword>JohnDoePassword</PrivPassword>
<PridUser>JohnDoePRIVATEID</PridUser>
<PrsetNumber>0</PrsetNumber>
<ServerCapNumber>1</ServerCapNumber>
<ProtectionGroupNumber>1</ProtectionGroupNumber>
<PuidUserList>
<HSSPublicId>
<Puid>JohnDoePUID</Puid>
<PrivateId>JohnDoePRIVATEID</PrivateId>
<ServiceProfileNumber>1</ServiceProfileNumber>
...
<IsWildcardPuid>false</IsWildcardPuid>
<SendTelURI>false</SendTelURI>
</HSSPublicId>
</PuidUserList>
</HSSPrivateId>
<GeoRedundancyData>
<HSSPrivateId>
<PrivPassword>JohnDoePassword</PrivPassword>
<PridUser>JohnDoePRIVATEID</PridUser>
<PrsetNumber>0</PrsetNumber>
<ServerCapNumber>2</ServerCapNumber>
<ProtectionGroupNumber>3</ProtectionGroupNumber>
<PuidUserList>
<HSSPublicId>
<Puid>JohnDoePUID</Puid>
<PrivateId>JohnDoePRIVATEID</PrivateId>
<ServiceProfileNumber>3</ServiceProfileNumber>
...
<IsWildcardPuid>false</IsWildcardPuid>
<SendTelURI>false</SendTelURI>
</HSSPublicId>
</PuidUserList>
</HSSPrivateId>
</GeoRedundancyData>
In the above example, the HSS Private ID specified under <GeoRedundancyData> is for the Protection Switch.
• <ServerCapNumber> under Private Id can be different between the Primary and Protection switches. In the
example, <ServerCapNumber> is 1 for Primary and 2 for Protection.
• <ProtectionGroupNumber> under Private Id specifies the id of the counterpart switch as listed under
ProtectionSites. However, it has to be set to 1 for the Primary. And for the Protection, this value has to be the
id of the Primary switch as seen under ProtectionSite list of the Protection Switch.
• <ServiceProfileNumber> under Public Id specifies the Service Profile number to associate the PUID with
and this can be set to different values between the two switches.
<AgcfGatewayRecord>
<TableId>2</TableId>
<GwId>2826</GwId>
...
<MateSite>3</MateSite>
<MateExternalIPAddr>135.2.117.8</MateExternalIPAddr>
<IsPrimary>true</IsPrimary>
</AgcfGatewayRecord>
<HSSPrivateId>
<PridDomainId>0</PridDomainId>
<PridUser>2826</PridUser>
...
<PrsetNumber>2826</PrsetNumber>
<ServerCapNumber>0</ServerCapNumber>
<ProtectionGroupNumber>1</ProtectionGroupNumber>
<PuidUserList>
<HSSPublicId>
<Puid>sip:2826</Puid>
<PrivateId>2826</PrivateId>
...
</HSSPublicId>
</PuidUserList>
</HSSPrivateId>
<HSSPrset>
<PrsetNum>2826</PrsetNum>
<PridUser>2826</PridUser>
<PrsetName>2826</PrsetName>
<ServerCapNum>1</ServerCapNum>
</HSSPrset>
<GeoRedundancyData>
<AgcfGatewayRecord>
<TableId>2</TableId>
<GwId>2826</GwId>
...
<MateSite>3</MateSite>
<MateExternalIPAddr>135.2.117.123</MateExternalIPAddr>
<IsPrimary>false</IsPrimary>
</AgcfGatewayRecord>
<HSSPrivateId>
<PridUser>2826</PridUser>
...
<PrsetNumber>2826</PrsetNumber>
<ServerCapNumber>0</ServerCapNumber>
<ProtectionGroupNumber>3</ProtectionGroupNumber>
<PuidUserList>
<HSSPublicId>
<Puid>sip:2826</Puid>
<PrivateId>2826</PrivateId>
...
</HSSPublicId>
</PuidUserList>
</HSSPrivateId>
<HSSPrset>
<PrsetNum>2826</PrsetNum>
<PridUser>2826</PridUser>
<PrsetName>2826</PrsetName>
<ServerCapNum>1</ServerCapNum>
</HSSPrset>
</GeoRedundancyData>
This is done automatically when modifying a subscriber with the OMC-P GUI. However, doing so with SOAP
does not modify the <AdditionalDn>-s. In order to achieve the correct result then, the user needs to do the
following:
After doing a subscriber modify (ed-ngfs-subscriber-v2), the SOAP user should follow it with a modify of that
subscriber's associated AGCF Endpoint (ed-ngfs-agcfendpoint-v2). This request needs only contain the key field
for AGCF Endpoint request, for example:
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
2 Edit the index.html file to look like this and replace the URL with the OMC-P server's name:
<html>
<head>
<meta http-equiv="refresh" content="0;URL=http://pebble/">
</head>
<body>
</body>
</html>
Note: The customer can also use their own home page.
END OF STEPS
------------------------------------------------------------------------------------------------
<ngfs-subscriber-v2>
<AlternateOtasRealm></AlternateOtasRealm>
<SubParty>
fields of SubParty.. (see SubParty in Appendix D)
</SubParty>
Features info, such as <CallForwardingBusy>
... fileds of features (see details in Appendix D)
</CallForwardingBusy>
<HSSPrivateId>
fileds of HssPrivateId (see HSSPrivateId in Appendix D)
</HSSPrivateId>
</ngfs-subscriber-v2>
If feature is per PUID, then this feature info can be more than one in ngfs-subscriber-v2. For example, one
subscriber has 2 PUID, puidA and puidB, and both of them assigned CallForwardingBusy. In SOAP, it will
be like
<CallForwardingBusy>
<PublicUID>puidA</PublicUID>
.......
</CallForwardingBusy>
<CallForwardingBusy>
<PublicUID>puidB</PublicUID>
......
</CallForwardingBusy>
Specially, field "PuidUserList" of HssPrivateId will include one or more HSSPublicId info, the number of
HSSPublicId depends on PUID number. HssPrivateId format is
<HSSPrivateId>
......
<PuidUserList>
<HSSPublicId>
......
</HSSPublicId>
<HSSPublicId>
......
</HSSPublicId>
</PuidUserList>
</HSSPrivateId>
All fields’ info of SubParty, Features and Hss will be found under ngfs-subscriber-v2 in this document.
Create a new Group Profile. When created, an appropriate Feature Template is formed and pushed to all the
FSDBs in the network. The Group Profile is also stored in the OMC-P database.
<ProfileName>ATS_SERVICE_PROFILE</ProfileName>
<ProfileVersion>1</ProfileVersion>
</ServiceGroupProfile>
</GroupProfile>
</PlexViewRequest>
Delete Profile
Modify Group Profile. There are two mutually exclusive options in the apply request. Restart and Stop.
• Discard eligibility
• Congestion control
Example
Here is an example request with the DEI indicator set explicitly to false:
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
<soap-env:Body>
<SubParty>
...
</SubParty>
<WebPortal>
...
</WebPortal>
<HSSPrivateId>
...
</HSSPrivateId>
</PlexViewRequest>
</soap-env:Body>
</soap-env:Envelope>
When a CI of “true” is returned to the API client, it should not send more requests to 1310 OMC-P until the
congestion has been relieved. The API client can query the state of anv1310 OMC-P southbound queue by
issuing the RTRV-QUEUE-INFO command.
The Congestion Indicator (CI will be included in all responses to client requests.
Example
Here is an example response containing the Congestion Indicator (CI):
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
<soap-env:Body>
<PlexViewResponse Command="ent-ngfs-subscriber-v2" Swit
</soap-env:Body>
</soap-env:Envelope>
M.1 ne7510(rtrv)
Added for 7510.R331.S0.01 and later!
M.2 mg7510circuitprofile(rtrv,ent,ed,dlt)
Added for A7510_R322_B01 and later!
M.3 mg7510h248profile(rtrv,ent,ed,dlt)
Added for A7510_R31 and later! All the parameters are required for ed. aid is required for rtrv/dlt
Valid value:
MEDIA_TYPE_AND_TRANSPORT_PROTOCOL,
TRANSPORT_PROTOCOL
MgwH248ProfileBwDefault A7510_R322_B01 "Default Bandwidth (B-line Absence) (kbit/s)"
(na for ent,opt for ed)
Valid value: integer (1-65535)
M.4 mg7510vmg(rtrv,ent,ed,dlt)
Added for A7510_R31 and later! All the parameters are required for ed. aid is required for rtrv/dlt
M.5 mg7510temperaturemanage(rtrv,ed)
Added for 7510.R331.S0.01 and later! All the parameters are required for ed. aid is required for rtrv/ed
M.6 mg7510fan(rtrv,ed)
Added for A7510_R31 and later!
Valid value:UP,DOWN
MgwShelfGen2FanInfospeed 7510.R331.S0.01 "Speed"
(na for ent,na for ed) Valid value:RAPID,SLOW,NO
M.7 mg7510card(rtrv,ed)
Added for 7510.R331.S0.01 and later! All the parameters are required for ed. aid is required for rtrv/ed
M.8 mg7510sfwipconfig(rtrv,ed)
Added for 7510.R331.S0.01 and later! All parameters should be provided in one edit request otherwise the
operation will be failed.
M.9 mg7510voipdefaults(rtrv,ed)
Added for A7510_R31 and later! All the parameters are required for ed. aid is required for rtrv. not supported
ent and dlt