I have iDrive Controller like the one in the photo, is it
possible to change to the big one? if yes how can i do it because i cannot find anywhere how, i appreciate the help, thanks.
Attached:
QUOTE
88tuning.id 01:37 AM 04-01-2019
Quote:
Originally Posted by mschembri1996
I have iDrive Controller like the one in the photo, is it possible to change to the big one? if yes how can i do it because i cannot find anywhere how, i appreciate the help, thanks.
Hi, i'm doing this kind of retrofit on my friend's car, i
havent finish it, but here's the step im doing last week:
1. Check either your old controller is connected to
KCAN1 or KCAN2 From factory, to differentiate it K-CAN wires are green and orange and K-CAN2 wires are yellow-red and yellow-brown. If your car has KCAN1, it should need another module to plug the controller. since my friend's car has KCAN2 from factory, so i didnt look the module. 2.Minimum build date (Zeitkriterium) of your car to be 07/13 3. The NBT needs to be flashed to at least 50.4 psdzdata. 4. Some coding in HU NBT HU_NBT/3000_HMI/ZBE_TOUCH_INTERACTIVE_MAP set to aktiv HU_NBT/3000_HMI/ZBE_TOUCH_SPELLER set to aktiv HU_NBT/3000_HMI/ZBE_TOUCH_BROWSER set to aktiv HU_NBT/3004_SYSTEM/EINSTELLUNGEN/ZBE_TOUCH set to aktiv
Goodluck!
hope this helps.
QUOTE
mschembri1996 03:33 AM 04-02-2019
Thank you so much for your help!!
QUOTE
No one 03:57 AM 04-12-2019
Here's a simple solution, perhaps:
https://f20.1addicts.com/forums/show....php? t=1603250. It should remove the interface (connection) restriction/complicacy as well as coding. The same buttons (no dead ones added). FWIW
QUOTE
Reply Back
All times are GMT -5. The time now is 02:08 AM.
Contact Us - BIMMERPOST - BMW Forums - Archive - Top