Professional Documents
Culture Documents
JAFARALI - E & I Engineer
JAFARALI - E & I Engineer
JAFARALI.A
Academic Records:
Permanent Address:
847.DTK Nagar, B.E in Electrical & Electronics Engineering, in Annamalai University, with
Chidambaram, an aggregate of 79%, 2009 Passout
HSC in Ramaswamy Chettiar Town Higher Secondary School,
Cuddalore District, Chidambaram (State Board) with 76%, 2005 Passout
SSLCin Ramaswamy Chettiar Town Higher Secondary School,
Tamil Nadu– 608102. Chidambaram (State Board) with 90%, 2003 Passout
Responsibilities:
Familiar with Saudi ARAMCO standards (SAES, SAMSS).
Preparation of project Scope of work by reviewing the client project
specifications.
Understanding the scope of Electrical, Instrumentation, Automation and
Communication.
Preparation of Preliminary RFQ documents for Instruments, Panels, JB’s.
Preparation of Material Take Off List (MTO) in ERP system and releasing
to Procurement.
Reviewing of Technical Offer for Instruments, Starter control Panel,
Electrical panel, RTU and ESD based on Project requirement.
Participation in Technical Meetings with sub Vendors and Clients/Consultants.
Review & Approval of Vendor's Drawings & Documents for Instruments, starter Control Panel, UPS, RTU and
ESD system.
Interaction with Project, Proposal, Procurement & Construction team.
Giving Technical Instructions to CAD Operators.
Preparation of Hook-ups Diagram & extracting Bill of Material (BOM).
Preparation of Cable Block Diagram, Cable schedule, Cable sizing & selection and Junction Box details.
Preparation of Wiring diagram and Instrument Loop diagram.
Preparation of Cable Tray routing diagram.
Preparing Non-Material Requisition (NMR 601, 602 & 603) documents for client approval.
Professional Experience 2:
Company : Prudent Saudi Arabia Limited, KSA
Duration : Nov 2012 – Aug 2015
Designation : Project Engineer - Automation
VFD System for Chemical Injection Skid for Onshore oil wells , Saudi Aramco , Manifa –KSA.
PLC and Scada System for MPT Chemical Plant for Basic Chemical Industries, Dammam –KSA.
PLC and Scada System for Sales Gas Pipeline in Independent Power plant for Saudi Aramco and Saudi
Electricity Board, Qyrayyah-KSA.
Leak Detection System for Qyrayyah Independent Power plant for Saudi Aramco and Saudi Electricity Board,
Qyrayyah-KSA.
Up-Gradation of PLC Annunciator System in Sharq – SABIC, Juabil –KSA.
PLC and Scada System for 2EG Annunciator System in Sharq – SABIC, Juabil –KSA.
Leak Detection System for Sadara Petrochemicals – Jubail-KSA.
Power Monitoring system for King Abdulla Sports City , Jeddah, Saudi Aramco – L&T
Responsibilities:
Project Planning, Design, development and execution of assigned projects as per the customer requirement.
Providing technical reports and documentation within guidelines and in compliance with internal and
customer procedures and regulations.
Deft in handling selection, Installation, of the Siemens & AB PLC as per the requirement and compliance
to Standards.
KICK of Meeting, Project Initiation & Handing over from Sales team.
BOM, Technical Data sheets documents Submission & getting approvals from client to start procuring
materials.
IO list, Functional Design Specification, & getting approvals from Clients to Start Engineering works.
Engineering Works involves- Hardware design of PLC system, Panel, Power calculation, Heat rise
calculation. Etc.,.
Coordinates with Panel team & Draftsman in the same time of Engineering works to get the Panel GA, IO
wiring, Cable scheduling documents and gets approval from client to start panel construction.
After Pre-FAT Testing FAT Procedure shall be submitting to client for approval & Schedule for FAT as
per the project planning/ clients availability.
After Successful FAT, system will be certified by client for dispatching the Panel to site. SAT will be
planned by Client.
Co-ordination with commissioning team to finish the project with in time.
Professional Experience 3:
Company :NISSI ENGINEERING SOLUTION, Tamil Nadu.
Duration :April 2011 – Sept 2012
Designation :Project Engineer – Substation Automation.
Responsibilities:
Preparation of I/O Lists and Cable Schedules.
Configuration of Siemens DATA CONCENTRATOR.
Integration of IEDs i.e. Relay (SIEMENS) through IEC 61850 protocol
Supervision for adaptation works.
Erection ,Testing and Commissioning of DC AK 1703
Supervision for adaptation works.
Programming of SCADA with Sicam 230
Integration of IEDs i.e. Relay (SIEMENS) through IEC 61850 protocol.
Conducting of FAT & SAT along with the client
Interfacing of DCS by MODBUS protocol
Testing and Commissioning of RTU and Scada.
Professional Experience 4:
Company : HUBERT ENVIRO CARE SYSTEMS (P) LTD, Tamil Nadu
Duration : JAN 2010 – MAR 2011
Designation : Electrical Engineer-Projects
Getting of quotations from vendors and order finalization for integration of the control panel.
Checking of plc programming and checking of inter panel wiring as per the approved drawings.
Testing of PLC logic Operation and Electrical Panel as per the requirement.
Erection of PLC Based Electrical panel Board and other electrical equipment.
Erection of Motors and Blowers ranges up to 125HP.
Cable laying and termination supervision.
Commissioning of Electrical Panel.
Technical Expertise:
Operating Systems : Windows XP & VISTA
Software’s Used : ACAD , TOOLBOX-II, DIGSI(SIEMENS),SICAM 230(HMI), RS-LOGIX 500
Selection Tools : Rockwell Integrated Architecture Builder, TIA portal.
Protocols : Modbus , IEC61850.
Strengths:
Declaration:
I hereby assure that the above-furnished details are true to the best of my knowledge and
belief. I also assure that I will be truthful and dutiful to the job assigned to me.
Yours Sincerely,
Jafar ali.a