Professional Documents
Culture Documents
Ejectproductline
Ejectproductline
E - J E C T SYS T E M S P RO D U C T L I N E
DD030707
Page 2
T H E C U T T I N G E D G E
Page 3
T H E C U T T I N G E D G E
8. Top of the ejector angled back 12 degrees offering a larger target for top loading.
9. Unique center lift bowl design reduces overall scraper width for easier transport.
10. High density molecular material is used for high wear surfaces on the ejector
guides inside the ejector slide mechanism for long life.
11.Radial tires are an option on all models.
12.Larger tires an option on some models.
13.Brakes are an option on all scrapers and standard on the E-45 ejector trailer.
14.The high density molecular material is also used on the top of the ejector face to
reduce material sticking to it during top loading applications.
15.The walking beam four tire E-22 XW and E-17 XW provides a smoother ride, less
haul road pumping, reduced side to side sway and easier finish grading. Also
enables the operator to grade the haul road fast with better results.
Page 4
E - J E C T S C R A P E R T R I P L E T H R E AT
SELF LOADING
TOP LOADING
PUSH LOADING
Page 5
P I C K YO U R P RO D U C T
E-17
E-22XW
E-45
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 6
E - 1 2 P U L L T YP E S C R A P E R
• Designed by contractor for the heavy construc- • Unique center lift bowl design reduces overall
tion market. scraper width for easier transport.
• Sold exclusively through Caterpillar Dealers • Large 6.5” pin and tapered roller bearings are
Worldwide. used inside of the tongue/hitch to provide long
• Over 60 Caterpillar parts are used in the de- life. Competitive brands use a 2 to 2-1/2” dry
sign and construction of the E-12. pin for the same function.
• Head end of hydraulic cylinders are used for • The E-12 pull scraper is designed to be pulled
bowl lift and apron lift for maximum perform- by CAT D6R or D6H crawler tractors or 4WD
ance and cylinder life. Caterpillar XT-3 hose agricultural tractors with 200-250 HP.
used on all hydraulic cylinders. • If you’re looking for the most durable and de-
• Hardox steel option is available for use inside pendable pull scraper that will outlast and out-
the bowl bottom, sides, apron, and ejector perform the others, E-Ject Systems has what
face for maximum strength and wear life. E- you are looking for.
Ject is the only scraper manufacturer offering
Hardox in all of these areas as an option.
Page 7
E - 1 2 P U L L T Y P E S C R A P E R
Bowl:
Floor Length 1m 3’ 3”
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 8
E - 17 P U L L T YP E S C R A P E R
• Designed by contractor for the heavy construc- • Unique center lift bowl design reduces over-
tion market. all scraper width for easier transport.
• Sold exclusively through Caterpillar Dealers • Large 6.5” pin and tapered roller bearings
Worldwide. are used inside of the tongue/hitch to pro-
vide long life. Competitive brands use a 2 to
• Over 60 Caterpillar parts are used in the design
2-1/2” dry pin for the same function.
and construction of the E-17.
• The E-17 pull scraper is designed to be
• Head end of hydraulic cylinders are used for
pulled by MT800 Series Challenger Tractors,
bowl lift and apron lift for maximum perform-
CAT D7R or D8T crawler tractors and agricul-
ance and cylinder life. Caterpillar XT-3 hose
tural tractors with 300-500 HP.
used on all hydraulic cylinders.
• Cushion hitch available as an option for im-
• Hardox steel option is available for use inside
proved haul road ride and faster cycle times.
the bowl bottom, sides, apron, and ejector face
for maximum strength and wear life. E-Ject is the • If you’re looking for the most durable and
only scraper manufacturer offering Hardox in all dependable pull scraper that will outlast and
of these areas as an option. outperform the others, E-Ject Systems has
what you are looking for.
Page 9
E - 17 P U L L T Y P E S C R A P E R
SPECIFICATIONS
SHIPPING DIMENSIONS
Rated Load: 19958 Kg 44,000#
Total Length 8.92 m 29’ 3”
Heaped, SAE rating: 13 m3 17LCY
Maximum Width: 3.29m 11’ 1”
Struck, SAE rating: 9 m3 12 LCY
Total Height: 2.3 m 7’ 9”
Empty Weight:
CUTTING EDGE DIMENSIONS
Front Pan No Brakes: 11295 Kg 24,900#
Center Section 22mm x 406mm x 1524 mm
Front Pan With Brakes: 11749 Kg 25,900#
.88” x 16” x 60”
Rear Pan No Brakes: 10886 Kg 24,000#
Caterpillar 623 Scraper (4T2887) Replacement Part
Rear Pan With Brakes: 11340 Kg 25,000#
Each End Section 22mm x 330 mm x 749 mm
Load on Tongue: 3162 Kg 6,972#
.88” x 13” x 29.5”
Bowl:
Ejector Height off floor: 1.93 m 6’ 4” Optional track pack shown on lead scraper
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 10
E - 17 X W P U L L T Y P E S C R A P E R
• The walking beam four tire E-17XW provides a • An exclusive feature only found on E-Ject
smoother ride, less haul road pumping, reduced 17XW is 29” of ground clearance.
side to side sway and easier finish grading. Also • Hardox steel option is available for use in-
enables the operator to grade the haul road fast side the bowl bottom, sides, apron, and ejec-
with better results. The rear bowl and tongue lift tor face for maximum strength and wear life.
provide an adjustable cutting edge angle to im- E-Ject is the only scraper manufacturer offer-
prove loadability in various ground conditions. ing Hardox in all of these areas as an option.
• Designed by contractor for the heavy construc- • Large 6.5” pin and tapered roller bearings
tion market. are used inside of the tongue/hitch to pro-
• Sold exclusively through Caterpillar Dealers vide long life. Competitive brands use a 2
Worldwide. to 2-1/2” dry pin for the same function.
• Over 60 Caterpillar parts are used in the design • The E-17XW pull scraper is designed to be
and construction of the E-17. pulled by MT800 Series Challenger Tractors,
CAT D7R or D8T crawler tractors and agricul-
• Head end of hydraulic cylinders are used for
tural tractors with 300-500 HP.
bowl lift and apron lift for maximum perform-
ance and cylinder life. Caterpillar XT-3 hose • If you’re looking for the most durable and
used on all hydraulic cylinders. dependable pull scraper that will outlast and
outperform the others, E-Ject Systems has
what you are looking for.
Page 11
E - 17 X W P U L L T Y P E S C R A P E R
E-17XW Scraper Specifications
Bowl:
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 12
E - 2 2 P U L L T YP E S C R A P E R
Page 13
E - 2 2 P U L L T Y P E S C R A P E R
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 14
E - 2 2 X W P U L L T Y P E S C R A P E R
• The walking beam four tire E-22XW provides a • Designed by contractor for the heavy con-
smoother ride, less haul road pumping, re- struction market.
duced side to side sway and easier finish grad- • Hardox steel option is available for use in-
ing. Also enables the operator to grade the side the bowl bottom, sides, apron, and ejec-
haul road fast with better results. The rear tor face for maximum strength and wear life.
bowl and tongue lift provide an adjustable cut- E-Ject is the only scraper manufacturer offer-
ting edge angle to improve loadability in vari- ing Hardox in all of these areas as an option.
ous ground conditions.
• Large 6.5” pin and tapered roller bearings
• An exclusive feature only found on E-Ject are used inside of the tongue/hitch to pro-
22XW is 29” of ground clearance. vide long life. Competitive brands use a 2
• Sold exclusively through Caterpillar Dealers to 2-1/2” dry pin for the same function.
Worldwide. • The E-22XW pull scraper is designed to be
• Over 60 Caterpillar parts are used in the de- pulled by MT800 Series Challenger Tractors,
sign and construction of the E-22XW. CAT D8T or D9T crawler tractors and agricul-
tural tractors with 400-500 HP.
• Head end of hydraulic cylinders are used for
bowl lift and apron lift for maximum perform- • If you’re looking for the most durable and
ance and cylinder life. Caterpillar XT-3 hose dependable pull scraper that will outlast and
used on all hydraulic cylinders. outperform the others, E-Ject Systems has
what you are looking for.
Page 15
E - 2 2 X W P U L L T Y P E S C R A P E R
Center Section
Weight Distribution: PN 4T-6568 Replacement Part
Empty: Tongue 28% Each End Section
Rear Axle 72% PN 4T-6611 Replacement Part
Loaded: Tongue 29% Router Bits
Rear Axle 71% PN 4J-8665 Replacement Part
TIRES
Width of Cut (outside router bits) 3.78m 12’ 5” Standard 26.5 x 25 Bias
Maximum Depth of Cut 3.12m 10.25” Optional 26.5 R 25 Radial
Maximum Depth of Spread 8.84m 29”
Bowl:
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 16
E - 4 5 E J E C T O R T R A I L E R
TIRES:
EMPTY WEGHTS:
LOADED WEIGHTS:
Page 17
E - 4 5 E J E C T O R T R A I L E R
• Designed by contractor for the heavy con- • Maneuverability is enhanced by a 110 degree
struction market. turning radius between the tractor and the
trailer.
• Over 60 Caterpillar parts are used in the de-
sign and construction of the E-45. • Hauling speeds of 34 mph for fast cycle times
and increased productivity.
• Head end of hydraulic cylinders used for
apron lift for maximum performance and • Lights are optional for double/triple shift op-
cylinder life. Caterpillar XT-3 hose used on all erations.
hydraulic cylinders. • Fenders are optional to reduce mud build up
• Hardox steel standard for use inside the bowl on tractor and trailer components.
bottom, sides, apron, and ejector face for • Apron opens 88 inches for unrestricted faster
maximum strength and wear life. E-Ject is the ejection of payload which reduces the total
only manufacturer offering Hardox. . cycle time.
• The walking beam four tire suspension pro- • If you’re looking for the most durable and de-
vides a smoother ride, greater operator com- pendable ejector trailer that will outlast and
fort, less haul road pumping, and reduced outperform the others, E-Ject Systems has
stress to the tractor and trailer. what you are looking for.
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 18
10 ’ X 28 ” D I SK HA R ROW
If you’re looking for the most durable and dependable disk harrow that will outlast and outperform the
others, E-Ject Systems has what you are looking for.
Page 19
10 ’ X 2 8 ” D I S K H A R ROW
Hydraulic Lift Assembly: Tube in tube with Heavy Duty Gang Supports are
Nylon slide bars & gusseted steel rollers. 4” x 6’ Tubing
Travel position is pin locked Simple Blade Scraper Easy to Adjust
Tires 425 65R 22.5 Large tires provide more flotation. Stan-
dard Industry Hubs, 10,000 lbs.
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 20
11 ’ X 30 ” D I SK HA R ROW
SPECIFICATIONS:
If you’re looking for the most durable and dependable disk harrow that will outlast and outperform the
others, E-Ject Systems has what you are looking for.
Page 21
11 ’ X 3 0 ” D I S K H A R ROW
Hydraulic Lift Assembly: Tube in tube with Heavy Duty Gang Supports are
Nylon slide bars & gusseted steel rollers. 4” x 6’ Tubing
Travel position is pin locked Simple Blade Scraper Easy to Adjust
Tires 425 65R 22.5 Large tires provide more flotation. Stan-
dard Industry Hubs, 10,000 lbs.
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 22
1 3 ’ X 3 6 ” D I SK HA R ROW
Overall Length: 25’ -6” Gang Axle: 36 degrees (18 front, 18 rear)
SPECIFICATIONS:
If you’re looking for the most durable and dependable disk harrow that will outlast and outperform the
others, E-Ject Systems has what you are looking for.
Page 23
1 3 ’ X 3 6 ” D I S K H A R ROW
Hydraulic Lift Assembly: Tube in tube with Heavy Duty Gang Supports are
Nylon slide bars & gusseted steel rollers. 4” x 6’ Tubing
Travel position is pin locked Simple Blade Scraper Easy to Adjust
Tires 425 65R 22.5 Large tires provide more flotation. Stan-
dard Industry Hubs, 10,000 lbs.
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM
Page 24
S H E E P S FO O T RO L L E R S
DESIGN FEATURES
Replaceable high wear resistant tips Hollow center tips fills with dirt wear surface
SPECIFICATIONS
If you’re looking for the most durable and dependable sheepsfoot rollers that will outlast and
outperform the others, E-Ject Systems has what you are looking for.
Page 25
S H E E P S FO O T RO L L E R S
Solid Cone Towers. Heat treated hard surfaced replace- Tip surface is 7 square inches for
able tips are easily replaced. maximum surface pressure
No jack required.
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 26
R U B B E R B E LT E D T R AC K PAC K
DESIGN FEATURES
• Increased floatation means faster hauls, increased productivity, and can work in extreme conditions
that tires cannot.
• Track packs are optional and can be replaced with wheels when not in use.
• Faster cycle times in soft conditions will improve performance and increase your bottom line.
• Increased flotation reduces time and money spent pulling / pushing scrapers when stuck.
Page 27
R U B B E R B E LT E D T R AC K PAC K
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 28
M T 8 0 0 S E R I E S AT TAC HE M E N T S
Page 29
M T 8 0 0 S E R I E S AT TAC H M E N T S
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 30
T R AC T O R H I T C H E S
Page 31
T R AC T O R H I T CH E S
E-JECT SYSTEMS, L.C. 1003 MILLER STREET PH: 888-272-8661 FAX: 563-245-1440
WWW.EJECTSYSTEMS.COM Page 32