Professional Documents
Culture Documents
Revdrillbrochure Lowres
Revdrillbrochure Lowres
Infrastructure
REV Drill
Excavator mounted leader
mast system
2
thyssenkrupp
and REV Drill
As of 2017, thyssenkrupp Infrastructure
(tkIF) are the sole distributors for REV Drill
in Australia and New Zealand.
tkIF sell, and hire REV Drill equipment in
Australia and New Zealand. Our distribution
is backed up by our onsite service and an
extensive stock of spare parts.
tkIF are able to offer compete versatility with the REV Drill leader
mast system, being able to add in house capabilities to offer a
complete solution.
tkIF can fit Müller vibrators and rotary drives along with KRUPP
drilling technologies to offer customers a technically sound, high
quality solution, to whatever a project requires.
Whether it’s drilling, driving, extracting, hire or sale, tkIF and REV
Drill have got you covered.
With the addition of REV Drill to our already existing products and
servicing, tkIF are now well and truly your one integrated supplier
for civil and Infrastructure groundwork projects.
3
thyssenkrupp Infrastructure
since 1983
• Hire
• Operator Training
• Sales
• Service
• Tooling
REV Drill is a revolutionary approach to drilling, uniquely designed to be attached to and easily
removed from any excavator, using the existing excavator hydraulics. REV Drill comes in a variety of
drill lengths and configurations to match up to any excavator.
The ability to remove the drill and allow your excavator to go back to digging in minutes makes REV
Drill truly unique.
The cost of a multipurpose REV Drill is a fraction of the cost of a single function specialty drill rig.
The REV Drill system is self-erecting and easy to mobilise to your job site in one load, which results
in substantially reduced freight costs. In addition, there is no assembly required and the drill arrives
on the job site ready to go. When you have a REV Drill mast on the job, you have the use of two
pieces of equipment at your disposal - a multifunction drill and an excavator.
REV Drill masts can be utilised for many vertical and horizontal drilling applications, including
foundation piers, sound barrier piers, beam retaining walls, auger cast piles, tie-backs, soil nails,
rock drilling, blast hole drilling, helical anchor installation, de-watering, and many more. There is no
limit to REV Drill’s versatile capabilities.
Specification
REV Drill HD Series
Excavator weight class (min) 13 ton
Short Auger
The short auger is bolted onto the end of
the drill’s kelly bar to drill dirt and rock for
jobs where the drilled shafts will stay open
and not collapse.
Typical Jobs:
• Sound wall foundations
• Drilled shafts for foundation piers
• Caissons
• Temporary shoring walls
Anchoring
By removing the drill’s kelly bar and
utilising specialty tooling described
below, many types of anchors can
be installed in both the vertical and
horizontal positions.
Typical Jobs:
• Tie backs & soil nails – utilising
continuous flight augers,
tri-cone/drag bits, down hole
hammers, helical anchors, or
grouted hollow bars
• Grouted hollow bar anchors,
titan bars, william’s bars, etc.
• Helical anchors
• Micropiles
8
Typical Jobs:
• Sound wall foundations
• Drilled shafts for foundation piers
• Caissons
• Temporary shoring walls
Continuous
A continuous flight auger (CFA) can be
utilised to pre drill for pile driving by
drilling through the hard layers in the
upper strata. Pre-drilling is performed
to insure easier, faster pile driving, and
to improve location accuracy when
driving steel, concrete, wood piles, or
sheet piling.
Vibratory Piling
A hydraulic, vibratory hammer can be
utilised on the REV Drill mast to drive a
variety of piles for many different
applications by removing the rotary
motor and sled from the REV Drill and
installing a vibratory hammer and sled.
Typical Jobs:
• Solar installations – driving tubular
pile, h-pile, steel channel, and all
types of solar foundations
• Sheet pile installation
Custom Applications
tkIF and REV Drill’s custom fabrication
team can design and modify drills to
meet your unique job requirements.
Working together with the consulting
and fabrication team, we can review
your job plans and requirements and
work with you to produce the most
economic solution for your job.
Typical Jobs:
• Drill’s mounted on long reach
excavators for difficult to reach
drilling locations
• Multiple drilling heads for line drilling
to speed up rock drilling production
• Small drill’s mounted on mini
excavators or skid steers with slew
drive mounts to access small jobsites
• Custom tooling fabrication
10
Service
Onsite
• Servicing
• Repairs
• Training
• Maintenance
In-house
• Repair and maintenance
• Machinery servicing
• Fabrication
• Full scale spare parts
• Cut to lengths orders
• Maintenance
11
Consumables
• Augers
• Cold rolled sheet piles
• Corner clutches
• Hollow bar anchors
• Hot rolled sheet piles
• Steel tubular piles
• UC column
thyssenkrupp Infrastructure
TKIF.REV.1.0.10.8.2017