Professional Documents
Culture Documents
Keyboard Weigher OP Instruction EN
Keyboard Weigher OP Instruction EN
1. Program menu
(How to enter: Press "1", "E" or "OK" on the main interface)
Function: Select the program preset by the user.
《1》 Program selection (How to enter: Press "1", "E" or "OK" under the menu
of program selection, editing, copying and deletion )
After inputting the program number, press "E" or "OK" (for example: "3", "E" or "OK"),
and the program "3" is currently being selected.
( 1)
《2》 Copy of program (How to enter: Press "2", "E" or "OK" under the menu
of program selection, editing, copying and deletion)
Copy the current program to the specified program number "X" (for example: "3", "E"
or "OK"), that is, copy the current program to the program number "3 ".
《3》 Program editing (How to enter: Press "3", "E" or "OK" under the
program selection, editing, copying and deleting menus)
( 3)
20. MULTI DUMP COUNT
"Number of times of multiple packaging" (When the product packaging exceeds
500 grams, it needs to be set twice or more, the unit is "time")
( 4)
4. Calibration menu
(How to enter: Press "4", "E" or "OK" on the main interface)
(1) INITIAL ZERO SETTING
"Initial zero setting" (select the bucket to be zeroed, and then press run. For
example:
to set the initial zero for No. 2 weighing bucket: press "2 ", " " or "OK", and then press "I")
(2) SPAN CALIBRATION
it and press run. For example, if I want to calibrate the scale of No. 2 weighing bucket
: press " 2 ", " E " or "OK", and then "Put weight" and then press " I " or "Run")
5. Calibration menu
(How to enter: Press "5", "E" or "OK" on the main interface)
( 5)
6. Setting options menu
(How to enter: Press "6", "E" or "OK" on the main interface, then press "1", "E" or "OK")
0 0 0 0 0 0 0 1 0 0
0 1 1 0 1 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
(1 is on, 0 is off)
1 COLLECTION BUCKET
Collection bucket switch
2 STAHHER DUMP Discharges sequentially
3 MULTLE DUMP Multiple packs
4 AVERAGE SYSTEM Average system
5 AFC DNON Automatic Tracking Control
6 ENGLISH Language selection
7 COUNTING Counting mode
8 MAIN FEEDER
Main vibration machine switch
9 CROSS HEAD FEEDER
Cross bucket feeder
10 CB OPEN EVERY DUMP Collects every time you open the package
11 CLEAN OUT DUMP SIGNAL Packing signal when clearing
12 DISCHARGE OVRE TW Discharges overweight material
13 CLLEAN OUT WHITHOUT READY Cleared when there is no ready signal
14 CHANGE OVER DECIMAL POINT
Decimal point printing
15 TEST SWTICH Test switch
16 W&M European weighing mode
17 EVERY DUMP SIGNAL OR MULITLI
Multiple unloading signal
18 CALIBRATION MINIMUM DISPLAY
Weight display (1 is 0.01, 0 is 0.1)
19 DATA WIGHSLAVE Combined weight follow the packaging machine
20 M. ERRORWB INHIBIT Weighing bucket is inhibited when the actuator is in error
21 DUMP SIGNAL RISE UP DITECT Prepare signal edge detection
22 RISE UP SIGNAL MEMORY Edge signal memory
23 INSERT THROW IN Unloading insertion signal
24 PRIORITY HEAD PRIORITY HEAD
25 CUSTOMER EYE Material detection electric eye
26 OPTION GATE Selection gate
27 ALARM SIGNAL Warning signal
28 DETECT SIGNAL Printer detector
29 RCU-700CONNECTION CHECK RCU-700 connection check
( 6)