Professional Documents
Culture Documents
JBTRACKBD
Ergonomic contour design
1
SPECIFICATIONS
• Connection: 2.4GHz Radio Frequency Wireless Technology
• Wireless Working Range: up to 10 meters
• Battery Type: (2) AAA Batteries
• Keyboard Layout: 87-Key QWERTY
• Key Type: Membrane
• Multimedia Hotkeys: Play/Pause, Stop, Previous Track,
Next Track, Volume Up, Down, & Mute
• Indicators: Battery Low, Num Lock & Caps Lock
• Dimensions:350 x 199 x 38 mm
• Weight:800g
REQUIREMENTS
• Operating System: Windows® 7 or above
• Connectivity: USB for Wireless Receiver
CONTENTS
INSTRUCTION MANUAL
Fn JBTRACKBD
Ergonomic contour design
A B C D
Wireless Keyboard Wireless Receiver AAA Batteries (2) Instruction Manual
2
KEYBOARD DESCRIPTION
Multimedia Hotkeys
Scroll Lock, Pause/Break,Num Lock
Fn
Battery Compartment
& Receiver Holder
Power Connect
Switch Button
Trackball Hole 3
HOTKEY DEFINITIONS & OPERATION
Action Symbol Function Description
Fn+F2 Play/Pause Plays or pauses track in multimedia software
Fn+F3 Stop Stops track from playing in multimedia software
Fn+F4 Previous Track Takes you to previous track in multimedia software
Fn+F5 Next Track Takes you to next track in multimedia software
Fn+F6 Volume Up Increases computer volume
Fn+F7 Volume Dn Decreases computer volume
Fn+F8 Mute Mutes computer volume
Fn+F9 Prt Screen Captures the image or text found on screen display
Fn+F10 Scroll Lock Scrolls the spreadsheet with the arrow keys
Fn+F11 Pause Break Pauses computer programs and interrupts screen output by BIOS
Fn+F12 NumLock Locks the input of the below keys in red frame to be numbers
Press Fn+F12 again to disable numlock.
Fn
4
INSTALLATION
2. Plug the USB Wireless Receiver into the USB port of your computer
USB Port
USB Wireless
Receiver
5
3. Remove battery cover from keyboard battery compartment.
+ AAA Battery
-
AAA Battery
3. 4.
5.
6.
Switch to ON
7. Receiver will automatically connect with wireless keyboard and ready to use.
Windows will detect automatically. No driver required.
6
TROUBLESHOOTING
If wireless keyboard cannot be operated, try the following:
1. Ensure you have inserted two AAA batteries inside the battery compartment
correctly. Switch keyboard to ON.
2. Ensure you have connected the USB receiver correctly to the computer's
USB ports. Move the keyboard 1 foot away from the receiver in order to avoid
interference while pairing connection.
3. Press CONNECT once on the bottom of keyboard within 15 seconds after
plugging USB receiver to computer.
4.NumLock Switch: Press "Fn+F12" to enable "NumLock" if users no need to
type these letters "U, I, L, P ..." , press "Fn+F12" again to disable "NumLock"
and users can type these letters "U, I, L, P ..." freely.
5. If user find the trackball sensitivity is not satifisfactory, you can visit "Control
Panel" to set the Mouse Pointer "Slow" or "Fast".
Note: Wireless phone, routers and other devices that uses 2.4GHz frequency,
may cause interference with wireless keyboard. Relocate such
wireless applicances away from your keyboard.
7
TIPS:
• When the Battery Low LED is ON, it means that the device requires to change
the batteries.
• We suggest to turn “OFF” the keyboard when leaving your desk for more than
an hour to save battery life for longer lasting use.
•The trackball will enter Sleep Mode after 2 minutes of idle time to save power.
• The built in trackball can also be removed for occasional maintenance and cleaning.
To remove the trackball:
2. Locate the hole where the trackball is enclosed, and use a pen to apply pressure to “pop
out” the trackball.
8
OFFICEWORKS LTD
236-262 EAST BOUNDARY ROAD
EAST BENTLEIGH VIC 3165 AUSTRALIA