You are on page 1of 16

DALI x4

PSU
DALI Power Supply

Each DALI line requires a


dedicated power supply for
correct operation.

ZONE CONTROLLER EDID Optional


RAPIX Zone Controller Ethernet to DALI Interface
Device
SMPS
Supports four DALI lines,
Switched Mode Power Supply
scheduling, monitoring, The EDID provides an isolated
Powers up to 4 EDIDs: High efficiency
network expansion and communication path between
switch mode power supply units.
emergency device monitoring. Ethernet and DALI lines.

Ethernet
network RAPIX EMERGENCY
Emergency Monitoring Software

Complete monitoring and reporting software for your


DALI emergency lighting system using Ethernet
networks.
RAPIX Emergency hardware components simply connect to the DALI line.

2 DALI lines can be connected to each Ethernet interface, or 4 to each Zone Controller. This
solution expands and can accommodate up to 500 DALI lines.

RAPIX Emergency software and devices work with the RAPIX Lighting Control System or any
other DALI compliant lighting control system.

DALI devices
Luminaires, switches,
dimmers, sensors, buttons,
touch panels

Emergency
Fixtures and Devices
Ethernet Network

Ethernet SMPS DALI


Interface PSU

RAPIX Zone
Controller

RAPIX Hardware

Lighting Control
Building Management System
RAPIX Emergency Software
Installed on any PC connected by Ethernet

You might also like