Professional Documents
Culture Documents
Abdur Rahman - CUET
Abdur Rahman - CUET
. Renowned Engineer.
EXPERIENCES
Toshiba Plant Systems & Services Corporation
Location : Matarbari 2*600MW Ultra Super critical coal Fired Power Project
Post : Control & Instrument Support Engineer.
Time : October 15,2022- Present.
Duty Location :
1.STG(Steam turbine Generator) All system.
Responsibilities:
C&I Construction Engineer
2. BOP portion, Supervision & Monitoring as an Erection(construction) Engineer to install instrument ( Like Level
,Temperature,Pressure,Flow,Valve-Gauge,Snesor,Transmitter,Switch etc )according to hook up & P&Id drawing.
3. Field instrumentation and instrumentation (I&C) equipment Packing List and all mechanical packages/systems I&C
components for projects supporting of Erection
C&I QC Engineer
1. Implement, maintain and verify quality system at job site as per company quality procedure and project quality
plan.
2. Incoming material inspection, review of certification documents and prepare inspection reports.
Duty Location :
STG(Steam Turbine Generator) Control Room; Engine Control Room; Engine Hall;
WTP(Water Treatment Plant);FTP(Fuel Treatment Plant);OFB(Oil Fired Boiler).
Responsibilities:
1. Shifting duty perform with Startup, running and shutdown of engine.
2. Monitor and control all running equipment parameters following prudent operating practice.
3. Maintain and update of all kind operational record and report.
4. As a schedule task perform with all kind of operation work & Test.
5. Operational report making as MIS, load dispatch, Outage file and all kind of operation
report.
6. All kind of Log sheet Maintain of Engine and auxiliaries.
7. All kind of fault finding to Engine and auxiliaries following the normal & alarm & tripping
value.
8. Special perform on WHRB Boiler & STG Commissioning
9. All kind of safety maintain to maintenance Hot work Cold work, Lock out/Tag out and
isolation of any equipment and system for maintenance.
10. Firefighting system operation and monitoring.
11. SCADA for Engine & DCS for WHRB-STG operator.
12. Understanding Electrical Drawing , SLD,P&ID, Installation & Operations Manual,
Instrument Manual.
13. Advanced Engineering Skills ,Techniques & abilities by attending regular workshops,
training & researching, also arranging training program as a trainer in ZPCL
After Boiler & Turbine Commissioning now I am working as a (WHRB Boiler & STG) Shift-Incharge at ZPCL.
CONTACT EDUCATION
2015-2019, Chittagong University Of Engineering &
(+880) 1968-021360 Technology
u1402032@student.cuet.ac.bd B.Sc in Electrical And Electronic Engineering with CGPA
3.12 out of 4.00
July 05,1996 2012-1014, Chittagong Model School And College
Notun Bazar Higher Secondary Certificate(HSC) with GPA 5.00
Matarbari,Moheskhali,Cox’s Bazar
2006-2012, Ragoi High School ,Chandpur
Secondary school Certificate(SSC) with GPA 5.00
SKILLS EXPERIENCES
MS OFFICE AUTOCAD
CADENCE
ACCOMPLISHMENTS
PLC
Industrial Attachment,2018
MATLAB ANDROID Training Institute for Chemical Industries(TICI).
PROTEUS HTML,CSS Narshingdi, Bangladesh. Completed Training Course On Industrial
Technology
INTERESTS Safety protection, Control system, Power related To Electrical
Engineering
SCADA BIOMEDICAL
Industrial visit ,2017
PLC ANDROID General Engineering & Manufacture Plant, Chittagong ,Bangladesh
Completed Industrial visit on Transformer Manufacturing Process.
AUTOMATION MACHINE LEARNING
Joint Financial Secretary of Andromeda Space & Robotics Research.
COMMUNICATION SKILL Organization,CUET.(2016-2019)
Member of IEEE, Student PROJECT
Branch, CUET. (2017-2019)
BANGLA Participant in Student to Startup Chapter 02(2019) & 8th national
ENGLISH scout jamboree, Bangladesh(2010).
I hereby declare that above mentioned information are true to the best of my knowledge and I bear
the responsibility for the correctness of the above mentioned particulars.
Abdur Rahman