You are on page 1of 4

Jan.

27, 2022

MA-2L4M-65F8-A12P-HG - 12port, 65 Degree Multi-band Base Station Antenna

Multi-band Base Station Antenna


698-806 824-894 1695-1880 1850-1990 1920-2200 2300-2360
• Supports MIMO: 698-894 MHz 4T4R, 1695-2360 MHz 8T8R
4 ports 8 ports
• Improved gain performance with side-by-side configuration
• Independent tilt on each Low and Middle Band ±45º ±45º

• Fully internal replaceable RET 68º 62º 62º 59º 56º 55º
• Near Field PIM improvement
0-10º 0-7º

ELECTRICAL SPECIFICATIONS
R1,R2 Y1,Y2,Y3,Y4
Frequency Range [MHz]
698-806 824-894 1695-1880 1850-1990 1920-2200 2300-2360
Gain [dBi] 16.4 17.0 19.4 19.8 20.0 20.1
Gain [dBi], over all Tilts 16.0±0.6 16.6±0.5 18.8±0.6 19.5±0.7 19.6±0.7 19.7±0.6
Azimuth Beamwidth [º] 68±7 62±5 62±8 59±8 56±6 55±5
Elevation Beamwidth [º] 9.3±0.9 8.1±0.6 4.4±0.4 4.1±0.4 3.9±0.3 3.4±0.3
0-10 0-7
Electrical Downtilt [º]
Support AISG 2.0
First Upper sidelobe suppression [dB] 15
Front to Back Ratio, Co-Polar ±30° [dB] 25 25 27 27 27 26
Cross Polar Discrimination Over Boresight [dB] 18 18 15 16 17 15
Intra array Isolation ports [dB] > 25 > 25
Inter band Isolation [dB] > 27
Polarization [º] ±45
Impedance [Ω] 50
VSWR < 1.5 : 1
Passive Intermodulation (2x43 dBm Carrier) [dBc] < -153 < -153
Maximum input Power Per Port [W] 300 250

The specification follows NGMN recommendations on Base Station Antenna Standards. (BASTA)

MECHANICAL SPECIFICATIONS
Antenna Dimensions: H x W x D [inches] 96.0 x 25.1 x 8.7
Net Weight (antenna) [lbs] 117.9
Connector Type 4.3-10(F)
Connector Quantity [EA] 12
Connector Position Bottom
Windload, Calculation [km/h] 150
Windload, Frontal [N] 1406
Windload, Lateral [N] 271
Survival Wind Speed [km/h] 241
Mechanical Downtilt [º] 0-7
Radome Material FRP, UV resistance
Radome Color Light gray
Lightning Protection DC ground

E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 1/4
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
Jan. 27, 2022

MA-2L4M-65F8-A12P-HG - 12port, 65 Degree Multi-band Base Station Antenna

ANTENNA LAYOUT
LAYOUT OF INTERFACE

CORRELATION TABLE

RET
Array ID Frequency [MHz] RF Port No. AISG RET UID
[Sub Unit]

R1 698 - 894 1, 2 1 DxxxxxxxxxxxxxxR1

R2 698 - 894 3, 4 2 DxxxxxxxxxxxxxxR2

Y1 1695 - 2360 5, 6 5 DxxxxxxxxxxxxxxY1

Y2 1695 - 2360 7, 8 6 DxxxxxxxxxxxxxxY2

Y3 1695 - 2360 9, 10 3 DxxxxxxxxxxxxxxY3

Y4 1695 - 2360 11, 12 4 DxxxxxxxxxxxxxxY4

RET CONTROL MECHANISM

E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 2/4
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
Jan. 27, 2022

Mechanical Mounting Configuration

Mounting Clamp [ Type No. AS-MC-MAIN ]


(Bundle)

Scope of supply 1 x lower clamp


1 x upper clamp
Material Hot-dip galvanized steel

Mounting Tilt Clamp [ Type No. AS-MC-TILT ]


(Option)

Scope of supply 1 x upper tilt clamp


Material Hot-dip galvanized steel

E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 3/4
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
Jan. 27, 2022

Model DuraRET-AISG
Protocols Compliant to AISG 2.0 / 3GPP
Input voltage range 10 ~ 30VDC (pin 6)
Power consumption < 1.5W (stand by); < 13W (motor activated)
2 x 8 pin connector according to IEC 60130-9
Connectors According to AISG Daisy chain in: male;
Daisy chain out: female
RS 485A/B (pin 5 / pin 3)
Power supply (pin 6)
Hardware interface
DC return (pin 7)
According to AISG
Adjustment time(full range) < 120 sec
Temperature range -40~ +70℃
Protection class IP55 (Installed)
Body: Aluminum
Housing material
Cover: Aluminum
Weight < 400g
Main dimensions (W 1 x D1 x H) 75.0 × 105.0 × 40.0 mm
(Max. dimensions (W 2 x D2 x H) (105.0× 143.5 × 40.0 mm)

E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 4/4
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.

You might also like