You are on page 1of 1

ELEG 3124Assignment

EE 2000 Assignment # 10
# 10
(taken from Dr. Jingxian Wu, University of Arkansas, 2020.)

 
ω
1. Consider a system with transfer function H(ω) = rect 2ωf
. The
sin(ω1 t) sin(ω2 t)
input signal is x(t) = t
+ t
, where 0 < ω1 < ω2 .
(a) Find the impuse response h(t).
(b) Find X(ω).
(c) Find y(t) is 0 < ωf < ω1 .
(d) Find y(t) is ω1 < ωf < ω2 .
(e) Find y(t) is ω2 < ωf .
2. P
The Fourier transform of x(t) is X(ω). The pulse train is p(t) =

n=−∞ δ(t − nTs ). Define xs (t) = x(t)p(t) as the sampled signal of
x(t) with a sampling period of Ts .
(a) Find the Fourier transform of xs (t).
(b) Assume the highest frequency of x(t) is ω0 and it satisfies 2ω0 ≤
ωs = 2π
Ts
. Pass xs (t) through a low pass filter with transfer function
 
H(ω) = rect ωωs , what is the time domain signal at the output
of the filter?
3. The amplitude modulation can be represented as s(t) = m(t) cos(ωc t),
where m(t) is the message signal with the highest frequency ω0 and
cos(ωc t) is the carrier signal. The carrier frequency is ωc and ωc >> ω0 .
The Fourier transform of m(t) is M(ω).
(a) Find the Fourier transform of s(t).
(b) At the receiver, the coherent demodulator will perform r(t) =
s(t) cos(ωc t), then pass the signal
 through
 a low pass filter with
ω
transfer function H(ω) = rect 2ω0 . Find the Fourier transform
of r(t). Find the output of the low pass filter.

You might also like