Professional Documents
Culture Documents
1C22M570200
1C22M570200
Initially designed as a self-mounting flexible piping system The combination of all above mentioned characteristics
for the HVAC (Heating, Ventilation & Airconditioning) it makes ANAFLEX® in particully applicable in the subway-,
appears that the ANAFLEX® system from Anamet Europe train- and bus-building industry, in closed areas, airports,
BV offers also an ideal solution for various electrical tunnels and (subway) stations, in the chemical and petro-
installations. The ANAFLEX® consists completely of high chemical industry, but also in the military sector, marine
quality stainless steel AISI-316L and stays even at high and air-trafiic control.
temperatures (till +250 ºC) completely liquidtight. In com-
bination with the unique ANAFLEX®-CLICK fittings an IP Material & Construction:
69K sealing will be reached. Construction : Flexible parallel corrugated hose, stainless
Due to the fact that the ANAFLEX® system has no plastic steel AISI-316L.
cover, it is highly resistant against oils, greases and sol- Temperature : -70 ºC to +250 ºC.
vents, and in case of fire there will be no development of Colour : Metal.
toxic gases and smoke. Because ANAFLEX® consists of
a continous profiled tube, an optimum EMI/EMP shielding Classification according NEN-EN-IEC 61386: Tubing
will be obtained. Compression resistance: Class 3, Medium (750 N)
EMP SHIELDING (MEOB.96_049 ELM) Impact resistance: Class 3, Medium (2 J) type ANAFLEX®
Shielding Effectiveness (dB)
Anaflex® Diameter (mm) Bending radius (mm) Standard carton Small carton Reels Weight
Size Inside Outside Static Dynamic Meter Article Nr. Meter Article Nr. Meter Article Nr. (Kg/m)
Size Anaflex® DN - - 12 16 20 - - - - - -
PG - - - - - - - - - - -
For the stainless steel ANAFLEX® hose, a special and 6 parts (body, counternut, retaining ring and filler ring are
unique fitting has been designed. The major advantage of nickel plated brass, internal sealing sleeve is from PTFE
these nickel plated brass ANAFLEX®-CLICK fittings is the and the internal flat seal is from silicone rubber).
easy click-on system (no need to dis-assemble the fitting Special approvals: Tested and approved by the “Institut
first). After tightening the backnut (2 till 3 full turns) a strong für Solartechnik SPF” (Switzerland).
and fully liquidtight connection is made (IP 69K). Temperature: -70 ºC till +250 ºC.
Colour: metal.
Material & Construction:
Construction : Nickel plated brass fitting, consisting of
E (SLW)
E (SLW)
Step 1. : Cut the hose to the desired length with a simple pipe-cutter or iron-saw.
Step 2. : Turn back the nut with 1/2 a turn, to release the retaining ring, and push the fitting on the hose till the
hose-end blocks on the flat seal inside the fitting.
Step 3. : Tighten the nut 2 till 3 full turns with a wrench to get a complete leaktight connection.