Professional Documents
Culture Documents
Antminer models
Publicada el 27 de septiembre de 2022
Leviatan CryptoLab
20 seguidores
For some it has been a bit frustrating to program an Eeprom, there are many editors but
most of them you must take off the integrated one to read it, program it and then install it, I
think it is overwhelming and kind of boring. For this we will create an Eeprom Editor
which connects from the IO port of the Hashboard, read and program without having to
take off and place the integrated one again.
You can find this Item in any virtual store, Amazon, Ebay, Aliexpress, ETC. The cost is
around 10$ - 20$ and it is an easy controller to use. In general, you do not need to install
drivers, but if your PC requires it, you just have to search on Internet for the CH341A
driver, download and install it.
Once finished, you should have a result similar to this. Important! make sure to isolate the
cables of the IO port that we do not use to avoid any short cut.
Step 3: Configure CH341a Programmer
Connect the USB CH341 to your PC, so that it installs the necessary drivers so that it can
work correctly, if it does not work, you will have to download the drivers manually.
Download the software, I will leave the download link at the end of the article.
Then make sure to configure the CH341a programmer editor well since it has to program
many types of integrated and it is not capable of doing it automatically, if you get to read,
or edit with the wrong model you will corrupt all the memory, you will not damage the
Eeprom (yeah , I screwed it up once) but you will have to find another Eeprom that works
well and read the content to edit the one you messed up.
Type : 24 Eeprom
Manu : ATMEL
Name : AT24CO2
Size : 256B
In the lower left corner, you will notice if USB CH341 is connected. Do a test without the
PCB-IO cable to make sure CH341 Programmer to check that the status of the device is
connected.
All done!.
I hope you liked this article and it will be very useful for you.
we will leave for later, how to know if the memory is corrupt?, if you need help do not
hesitate to contact me.