Professional Documents
Culture Documents
Pvi-Aec-evo Bcd.00389 en Revb
Pvi-Aec-evo Bcd.00389 en Revb
PVI-AEC-EVO is the low cost solution Moreover, the presence of digital Highlights
for remote monitoring of PV plants outputs allows PVI-AEC-EVO to satisfy − − An expansion bus enables easy
with all ABB devices. the need of generating impulse signals, connection of options for battery
status signals or relay outputs. backup pack or GSM/GPRS module
The modular and expandable for remote connectivity when a wired
architecture combined with the din-rail The built-in 2 x 16 characters display LAN Ethernet is missing
mounting system makes the PVI-AEC- along with the integrated Web − − Connects up to 128 ABB inverters
EVO suitable for any kind of installation User Interface, accessible via LAN using Aurora Protocol over RS485 for
in PV plants where ABB inverters and connection, makes the system to be low frequency data sampling
Stringcomb have been installed. easy configured − − A quick review of the main key
Operating as gateway the PVI-AEC- performance parameter of the plant
The communication between the PVI- EVO sends all data collected securely locally provided by WUI
AEC-EVO and all other ABB devices is and reliably to the Aurora Vision® Plant − − Removable 2GB capacity SD Card
based on the proprietary Aurora Management Platform for performance flash memory for backup data storing
Protocol while environmental data can monitoring, condition monitoring and − − Remote configuration and
be obtained by connecting analog data reporting. management capabilities, including
sensors directly to the three available firmware upgrades over the Internet
analog inputs. using Plant Portfolio Manager
Compliance
Marking CE
Safety and EMC standards EN60950-1, EN 55022, EN 55024
1)
Check compatibility list before to order
2)
Check for availability
3)
All ABB inverters supported except for PRO-33, ULTRA and PVS-xxx
4)
Maximum 5 x ABB string inverters supported (TRIO-20.0/27.6 and PRO-33 excluded)
Remark. Features not specifically listed in the present data sheet are not included in the product
Analog inputs
2x(0...10Vdc)/(4...20Vdc)
1x PT100/PT1000
RS-485#2 RS-485#1
Irradiance sensor
Internet
Plant Porfolio Manager
Plant Viewer Plant Viewer for Mobile
PVI-AEC-EVO - Accessories
Irradiance reference
cell 0 - 10 V & back
PVI-AEC-IRR-T
of reference cell
temperature
PVI-AEC-WIND-
Irradiance reference Wind speed sensor
COMPACT
cell 0 - 10 V & back
PVI-AEC-IRR-T(30) of reference cell
temperature with 30 m
cable
PT-100 Self-Adhesive
PVI-AEC-T100-ADH back of panel PVI-GSM/GPRS GPRS cellular module
temperature sensor
Ambient temperature
PVI-AEC-T1000-BOX sensor with IP65 PVI-GSM/GPRS Backup battery pack
enlosure
Supply BUS
18 - 36 Vdc Internal + 5 V / 0.5A
power supply RS232
TX
RX
RTN
Keyboard Display
RS485_1
+ T/R Relay
output
Devices - T/R optoisolated 250V / 3A
RTN
Relay 1
RS485_2
+ T/R Relay 2
3
Devices
- T/R
/ MOD BUS Relay 3
RTN
PT 100 / PT 1000
sensor 3
A/D
Configurable Configurable
analog input digital input
Support and service For more information please contact © Copyright 2015 ABB. All rights reserved.
ABB supports its customers with your local ABB representative or visit: Specifications subject to change without notice.