4z 7° coNosTay,
IN STAN ‘Adision of SCP SCIENCE
21800 Clark-Graham Avenve
Oil Analysis Standards Seca cciiaaes
January 1, 2008
Certificate of Analysis
Catalogue Number: 150-021-003 / 150-021-019
Description CONOSTAN Multi-Element Standard
S-21:100 ppm
Lot Number: 21398100
ELEMENTS ~ CONCENTRATION, ppm (ug/g)
Ag 1020.1 Al 1000.2 B 100802 Ba 0020.1
ca 1000.1 ca 1000.2 Cr 1000.2 cu 1020.3,
Fe 0020.2 Mg 1080.2 Mn 100802 Mo 100201
Na 10020.1 Ni 1020.2 P 100802 Po 1020.3
Si 10080.1 sn 1080.3 Ti 10080:1 v 1040.3
2n 1080.1
QUALITY ASSURANCE
‘This standard was prepared by weight measurements originating fom assayed element Concentrates. A precursor blend was
vei by alomic emission or absorption spectroscopy. Element concentrations for thie standard are based on the Concentrate
12980" vakes and were prepared fo win the unceainty values listed above al the 95% Confidence Interval. a8 determined by
‘weigh! measurements of blend components conducted on balances calxated and verified with NIST tracaabla weighs
“Each element Concentrate was assayed by classical wet chemical methods. Precision of assay measurement is 405 percenl
‘maxinum, bul ypcaly +03 percen. oF ss. Assay accuracy 1s wihin one percent of measured vawe, bul typically much les, 6s
etemmined by co-measurement of, and laceabily to, NIST Standards, of Ceriiad Anaiyical Reagent Grade Chemicals, no
‘sulable NIST standards exels.
a shot
information
Pras wes
i
Ryman Wassat
CONOSTAN
‘Telephone: 1-800-361-6820 (tollree) or +4 (514) 457-0701 wwrw.conostan.com
Fex: 1-800-259-5549 ((lliree) or +1 (514) 487-4499 onostan@scpscience.com4A ye ConosTaN
ONO. STAN Aduison of SCP SCIENCE
21800 CiarkGraham Avenue
Oil Analysis Standards
January 19, 2009
Certificate of Analysis
Reference: CONOSTAN Custom Blend Multi-Element Standard
$-21:25 ppm; Lot No. 080430-2
ati: 150-021-006 / 150-021-024
ag 5 AES 8 25 Ba 25
fo 5 5 cr cs
Fe 25 Mg 25 Mn 25 Mo 25
Na 2s No 25 P 25 Pho 25
si 25 su 25 Ti 25 v 25
mn 25
QUALITY ASSURANCE
This standard was prepared by weight measurements originating from assayed element Cancentrales, Element
Concentrations for this standard are based on the Concentrate assay” values and ware prepared to within #2.0
percent relative or better as determined by weight measurements of blend components conducted on balances
calibrated and verified with NIST traceable weights.
“Each element Concentrate was assayed by classical wel chemical methods, Precision of assay measurement is
20.5 percent maximum, but typically +0.3 percent, or less. Assay accuracy is within one percent of measured
value, but typically much less, as determined by co-measurement of, and traceability to, NIST Standards, or
Cerified Anaiylical Reagent Grade Chemicals, i no suitable NIST Standard exists,
‘See other side for shelf life and warranty information,
Ry mis wssef
Ayman Wassef
CONOSTAN
‘Telephone: 1-800-361-6620 (tall-ree) or +1 (514) 457-0701 ww.conostan.com
Fax: 1-800-253-5549 (tollfrea) or +1 (S14) 457-4499, conostan@sepscience.comre ® CONOSTAN,
CONOSTAN era
Oil Analysis Standards SRA eee
January 19, 2009
Certificate of Analysis
Reference: CONOSTAN Custom Blend Multi-Element Standard
$-21:25 ppm; Lot No. 080401-6
Cat: 150-021-006 / 150-021-024
Ag 25 AL 25 B 25 Ba 25
Ca 25 Cd 25 Cr 25 cu 25
Fe 5 Me 25 Nn 25 Mo 25
Na 25 Ni 25 Pp a Pb 25
Si 25 ‘sn 25 Tt a v 25
In 25
QUALITY ASSURANCE
‘This standard was prepared by weight measurements originating from assayed element Concentrates. Element
concentrations for this standard are based on the Concentrate assay" values and were prepared to within +2.0
percent relive or better as determined by weight measurements of blend components conducted on balances
Calibrated and verified with NIST traceable weights
“Each element Concentrate was assayed by classical wel chemical methods. Precision of assay measurement is
40.5 percent maximum, but typically +0.3 percent, or less. Assay accuracy is within one percent of measured
value, but typically much less, as determined by co- measurement of, and traceability to, NIST Standards, of
Certified Analytical Reagent Grade Chemicals, ifno suitable NIST Standard exis,
‘See other side for shelf fe and warranty information
Afroman wessif
‘Ayman Wassef
CONOSTAN
‘Telephone: 1-800-361-6820 (tolfee) or +1 (514) 457-0701 wwww.conostan.com
Fax: 1-800-253-6549 (toll-ree) or +1 (514) 457-4499 conosian@sepscience.com4a ye ‘CONOSTAN.
4 | A division of SCP SCIENCE
21800 Clark-Graham Avenue
; ‘ Bueou og nex aes
Oil Analysis Standards Gavan
January 19, 2009
Certificate of Analysis
Reference: CONOSTAN Custom Blend Multi-Element Standard
$-21:25 ppm; Lot No. 081202-1
Catt: 150-021-006 / 150-021-024
Ag 5 Al 5 B 25 Ba 25
ca 25 ca 25 cr 25 cu 25
Fe 25 Mg 25 Mn 25 Mo 25
Na 25 Ni 25 P 25 Pb 25
si 25 sn 25 Ti 25 v 25
Zn 25
QUALITY ASSURANCE
‘This standard was prepared by weight measurements originating from assayed element Concentrates: Element
‘concentrations for this standard are based on the Concentrate assay" values and were prepared to within #2 0
Percent relative or better as determined by weight measurements of blend components conducted an balances
calibrated and verified with NIST traceable weights.
“Each oloment Concentrate was assayed by classical wet chemical methods. Precision of assay measurement is
20.5 percent maximum, but typically £0.3 percent, or ess, Assay accuracy is wilhin one percent of measured
Value, but typically much less, as determined by co-measurement of, and traceabilly to, NIST Standards, of
Cortified Anaiytical Reagent Grade Chemicals, ifna suitable NIST Standard exists
See other side for shelf life and warranty information.
Pri roan whee
‘Ayman Wassef
CONOSTAN
‘Telephone: 1-800-961-6820 (tolfee) or +1 (614) 457-0701 yrww.canastan.com
Fax: 1-800-258-5549 (tol-ree) or +1 (Sid) 487-4499 conostan@scpscience.comSHELF LIFE OF CONOSTAN STANDARDS
‘Sholf life: Standards should not be used beyond 12 months* from the date of receipt (see date of shipment
on botte). Stabiity varies withthe element or element combination and the concentration. Higher
Concentrations contioute to longer shelf life. Contamination introduced wien transfers are mace with
‘droppers and pinetes is a common problem. For unopened product containers, Conostan warrants stably
Up to 12 months" from the date of shipment
‘Moisture: Moisture sensitivity varies with tne element but all -based standards should be protected from
exposure to moisture. Keep container caps tchtened during storage, If high humidity is a normal operating
Coneition, minimize exposure and consider replacing standards more frequently.
‘Storage: Store standards in thei original Conostan containers at ambient laboratory temperatures, keep
Containers tightly sealed, and avoid drect exposure to sunlight. Do not refrigerate,
Dilutions: Dilutions to lower concentrations contribute to shorer stable if. Use care, As stated above,
Contarnination introduced when transfers are made with droppers and pipettes is a common problem. She
life in solvents may range from one day to several weeks. Solvent qualty (moisture content and purity) can
have @ significant effect on stabilty. We recommend:
1. using a high-quality, analtical-grade solvent
2. determining shel ife of your clutions by preparing a batch of solvent-dluted standard. Run tests
over time comparing your aged diution against a freshly prepared dilution to learn how long your
dilution may remain stable,
Remember, when you change to another lot number (or even another botte) of solvent, shelf life may be
affected, For mut-slement standards, be aware that shel Ife may vary among individual elements,
DUREE DE VIE DES ETALONS CONOSTAN
Durée de vie : Les éiaions ne doivent pas étre utlisés aprés 12 mois” de la date de réception (voir a cate
expedition sur la boutetle). La stabillé varie selon |'slemant ou la combinaison éléments ainsi que leur
concentration. Les concentrations plus élevées contriouent a une durée de vie pls longue. La
Contemination introdute los de transfers fits avec des tubes comptes-gouttes ou pipettes est un probléme
‘courant. Conostan garantie les contenants non-ouvers pendant une période de 12 mois" de la data
expedition
Humidité : La sensipite due a rhumisité varle selon Iélément, par contra, les étalons & base d'huile ne
\devraient pas eire gardés dans des enaroits hummides. Garder les contenants bien fermés pendant
"entreposege. Si humidité est un probleme courant, minimisar le eontact et prévoir le emplacement plus
frequent des étalons,
Stockage ; Stocker les alons dans leur contenant dorigine et conserver dans des concitions normales de
‘aboratoie, gerder les contenanis bien fermes et éviter le contact crect avec les rayons de sole, Ne pas
resrigerer.
Dilutions : Les dilutions a des concentrations infériaures contribuent& une durée de vie plus court,
Uiliser de la arécaution. Tel que mentionné ci-dessus, la contamination inttoduite los de transfers avec
des tubss comptes-gouttes ou pipettes est un probleme courant, La durée de vie dans des solvants peut
varier dune journée jusqu'a plusieurs semaines. La qualité du solvant (contenu d*humicite st pursta)
Peuvent avoir un effet significa sur la stabilte. Nous recommandons
1. Tuttisation d'un solvant anaiytique de haute qualité
2 determiner la durée de vie selon en preparant un lot dételon diué par solvant. Effectuer des analyses
Sur une periede de temps en comparant un étalon fais ain de déterminer la durée de vie de [a
lution
Noubliez pas que lorsque le ot de solvant change ou une autre boulelle de solvant est utlisée, la durée de.
ie Peut ere aectee, Pour des éiaions mut-eiements, veuilez noter que a durée de vie peut vaner dun
element 3 rau,