Professional Documents
Culture Documents
ANKLE SYSTEM
KL-9 Ankle System
ABOUT
ABOUT US U
KAUL-Medizintechnik GmbH, founded in 2015, is a responsible
manufacturer of orthopedic implants and instruments based in
Germany. We use state-of-the-art manufacturing equipments and
have highly trained professionals. The company provides both
premium quality products and high-level services. Through our
international brand KAULMED, we are a reliable and competent
partner for surgeons all over the world.
KL-9 Ankle System
Contents
Introduction 2
Design Features 3
1
KL-9 Ankle System
Introduction
2.7mm KL-9 K-Lock Screw, Self-Tapping, (Star Head) Locking Screw SS & Ti Pink
2.7mm Cortical Screw, Self-Tapping, (Star Head) Non-Locking Screw SS & Ti Golden
3.5mm KL-9 K-Lock Screw, Self-Tapping, (Star Head) Locking Screw SS & Ti Pink
3.5mm Cortical Screw, Self-Tapping (Star head) Non-Locking Screw SS & Ti Green
2
KL-9 Ankle System
Design Features
Features for
Guide block Combi Hole
(Accept Locking & Non-locking Screws)
LC Undercut
━ Variable angle hole allows minimum screw prominence creating low profile construct when used at nominal
angle and can be angled within a 30 conical angle around the central axis of plate hole.
━ The shaft holes are combined holes of Non-locking and Locking (variable angle) type. The Non-locking
section
━ Provides axial compression and the variable angle locking section provides angular stability.
━ The distal holes are variable locking type to facilitate fixation of metaphyseal and epiphyseal segments.
━ The K-wire holes are provided for provisional reduction of fragments and to confirm the position of plate
relative to bone.
━ Limited contact shaft profile limits plate to bone contact that allows sufficient blood supply for faster healing.
━ Anatomical contoured profile reduces soft tissue irritation.
━ Thin cross-section and rounded edges
3
KL-9 Ankle System
Design Features
━ Head of plate has eleven 2.7mm Variable angle locking screw holes as well
as a compression screw hole that accepts a 3.5mm corticle screw to pull
distal portion of plate to bone.
2.7/3.5mm KL-9 K-Lock Anteromedial Distal Tibia Plate Guide Wire Hole
━ Head of plate has ten 2.7 mm Variable angle locking screw holes as well as
a compression screw hole that accepts a 3.5 mm cortexscrew to pull distal
portion of plate to bone.
━ Anterior arm aids in capturing small articular bone fragments and has three
2.7mm Variable angle locking screw holes.
4
KL-9 Ankle System
Design Features
2.7/3.5mm KL-9 K-Lock Anterolateral Distal Tibia Plate Guide Wire Hole
━ Head of plate has eight 2.7 mm Variable angle locking screw holes for
articular fixation.
━ All the holes of the Lateral Distal Fibula Plate features multiple variable
angle locking holes that accept 2.7mm Variable angle locking, and 2.7mm
corticle screws.
━ The plate can be used to secure syndesmotic fixation through elongated
holes in Variable angle hole.
5
KL-9 Ankle System
Design Features
2.7mm KL-10 K-Lock Lateral Distal Fibula Plate Screw orientation (nominal)
━ All the holes of the Lateral Distal Fibula Plate features multiple variable
angle locking holes that accept 2.7 mm Variable angle locking, and 2.7mm
corticle screws.
━ The plate can be used to secure syndesmotic fixation through elongated
holes in Variable angle hole.
2.7mm KL-9 K-Lock Distal Tibia L-Plate 2.7mm KL-9 K-Lock Distal Tibia T-Plate
6
KL-9 Ankle System
7
KL-9 Ankle System
8
KL-9 Ankle System
The KL-9 Ankle system is intended for fixation of the ankle in adults and adolescents in which the growth plates have
fused, and particularly in osteopenic bone.
i ii iii iv v vi
9
KL-9 Ankle System
Length
Thickness 1.6mm
Titanium
Stainless Steel
10
KL-9 Ankle System
Length
Thickness 1.6mm
Titanium
Stainless Steel
11
KL-9 Ankle System
Length
Thickness 1.6mm
Titanium
Stainless Steel
12
KL-9 Ankle System
Length
Thickness 1.6mm
Titanium
Stainless Steel
13
KL-9 Ankle System
Length
Holes
38.8mm
Star Holes
Thickness 2.8mm
Titanium
Stainless Steel
14
KL-9 Ankle System
Length
Star Holes
Holes
38.8mm
Thickness 2.8mm
Titanium
Stainless Steel
15
KL-9 Ankle System
Length
Star Holes Holes
16.2mm
Thickness 3.7mm
Titanium
Stainless Steel
16
KL-9 Ankle System
Length
Thickness 3.7mm
Titanium
Stainless Steel
17
KL-9 Ankle System
Length
Thickness 8mm
Titanium
Stainless Steel
18
KL-9 Ankle System
Length
Thickness 8mm
Titanium
Stainless Steel
19
KL-9 Ankle System
Length
Thickness 8mm
Titanium
Stainless Steel
20
KL-9 Ankle System
21
KL-9 Ankle System
22
KL-9 Ankle System
3 Self Cut
38mm L9093538T L9093538S
40mm L9093540T L9093540S
42mm L9093542T L9093542S
44mm L9093544T L9093544S
46mm L9093546T L9093546S
48mm L9093548T L9093548S
50mm L9093550T L9093550S
52mm L9093552T L9093552S
54mm L9093554T L9093554S
56mm L9093556T L9093556S
58mm L9093558T L9093558S
60mm L9093560T L9093560S
65mm L9093565T L9093565S
70mm L9093570T L9093570S
75mm L9093575T L9093575S
80mm L9093580T L9093580S
85mm L9093585T L9093585S
90mm L9093590T L9093590S
95mm L9093595T L9093595S
23
KL-9 Ankle System
24
KL-9 Ankle System
Instruments
25
KL-9 Ankle System
L10I001
Qty. 1
Conical Extraction Screw, Ø3.5mm, for Variable Angle System
L10I002 Qty. 2
Drill Bit with Quick Coupling with Stopper, Ø2.8mm x Length 165mm, for Variable Angle System
L10I003 Qty. 2
Star Screwdriver Shaft, T8, for Variable Angle System
L10I004 Qty. 1
Depth Gauge measuring upto 60mm for Variable Angle System
L10I005 Qty. 2
Drill Bit with Quick Coupling, Ø2.0mm x Length 140mm, for Variable Angle System
L10I006 Qty. 1
Bone Tap Quick Coupling for Cortical Screws, Ø3.5mm, for Variable Angle System
26
KL-9 Ankle System
L10I007
Qty. 2
Screwdriver Shaft, T15, for Variable Angle System
L10I008 Qty. 3
Threaded Drill Sleeve for Ø2.8mm Drill Bit - Variable Angle System
L10I009 Qty. 1
Self-Centering Double Drill Guide, Ø2.5/3.5mm, for Variable Angle System
L10I010 Qty. 1
Torque Limiting Attachment, 1.2Nm, for Variable Angle System
L10I011 Qty. 1
Torque Limiting Attachment, 1.5Nm, for Variable Angle System
L10I012 Qty. 2
Drill Bit with Quick Coupling End, Ø2.5mm x Length 180mm - Variable Angle System
27
KL-9 Ankle System
L10I013
Qty. 1
Drill Bit with Quick Coupling End, Ø3.5mm x Length 110mm - Variable Angle System
L10I014 Qty. 1
2.0mm Variable Angle Guide for Variable Angle System
L10I015 Qty. 1
Self-Centering Double Drill Guide, Ø2.0/2.7mm, for Variable Angle System
L10I016 Qty. 1
2.8mm Variable Angle Double Drill Guide for Variable Angle System
L10I017 Qty. 1
Handle with Quick Coupling for Variable Angle System
L10I018 Qty. 1
Handle for Torque Limiting Attachment, for Variable Angle System
28
KL-9 Ankle System
L10I019
Qty. 1
2.5Nm Torque Limiting Handle for Variable Angle System
L10I020 Qty. 1
Depth Gauge measuring upto 110mm, for Variable Angle System
L10I021 Qty. 1
Percutaneous Depth Gauge Adaptor for 3.5mm Screws - Variable Angle System
L10I022 Qty. 5
Kirschner Wire with One Sided Trocar Tip Ø1.6mm x Length 150mm
L10I023 Qty. 1
Periarticular Reduction Forcep, Small, for Variable Angle System
L10I024 Qty. 1
Periarticular Reduction Forcep, Medium, for Variable Angle System
29
KL-9 Ankle System
L10I025
Qty. 1
Large Compression Forcep with Speed Lock for Variable Angle System
L10I026 Qty. 1
Large Distraction Forcep with Speed Lock for Variable Angle System
L10I027 Qty. 2
3.5mm Post for Variable Angle Locking Hole
L10I028 Qty. 2
2.8mm Compression Wire 10mm Thread for Variable Angle System
L10I029 Qty. 2
2.8mm Compression Wire 15mm Thread for Variable Angle System
L10I030 Qty. 2
2.8mm Compression Wire 20mm Thread for Variable Angle System
30
KL-9 Ankle System
L10I031
Qty. 2
2.8mm Compression Wire 25mm Thread for Variable Angle System
L10I032 Qty. 2
2.8mm Compression Wire 30mm Thread for Variable Angle System
L10I033 Qty. 2
2.8mm Compression Wire 35mm Thread for Variable Angle System
L10I034 Qty. 2
2.8mm Compression Wire 40mm Thread for Variable Angle System
L10I035 Qty. 2
2.8mm Compression Wire 45mm Thread for Variable Angle System
L10I036 Qty. 2
2.8mm Compression Wire 50mm Thread for Variable Angle System
31
KL-9 Ankle System
L10I037
Qty. 2
2.8mm Compression Wire 55mm Thread for Variable Angle System
L10I038 Qty. 2
2.8mm Compression Wire 60mm Thread for Variable Angle System
L10I039 Qty. 2
Guide Wire, Ø2.0mm x Length 150mm
L10I040 Qty. 2
Guide Wire with Threaded Tip, Ø2.0mm x Thread Length 10mm x Length 150mm
L10I041 Qty. 3
Threaded Drill Sleeve for Ø2.0mm Drill Bit - Variable Angle System
L10I042 Qty. 1
Tap, HA 2.7mm for Variable Angle System
32
KL-9 Ankle System
L10I043
Qty. 1
Screwdriver Star Head, T8, for Variable Angle System
L10I044 Qty. 1
T-Handle with Quick Coupling for Variable Angle System
L10I045 Qty. 2
Self-Centering Bone Holding Forcep, Speed Lock, 190mm for Variable Angle System
L10I046 Qty. 1
Reduction Forcep, Serrated Jaws, Speed Lock, 160mm for Variable Angle System
L10I047 Qty. 1
Reduction Forcep, Pointed, Ratchet Lock, 180mm for Variable Angle System
L10I048 Qty. 1
Bending Iron 1 for Variable Angle System
33
KL-9 Ankle System
L10I049
Qty. 1
Bending Iron 2 for Variable Angle System
L10I050 Qty. 3
Ø1.2mm Kirschner Wire for Variable Angle System
L10I051 Qty. 1
Hohmann Retractor, 6.5mm for Variable Angle System
L10I052 Qty. 1
Hohmann Retractor, 8.5mm for Variable Angle System
L10I053 Qty. 2
Hohmann Retractor, 15.5mm for Variable Angle System
L10I054 Qty. 1
Periosteal Elevator with Silicon Handle, Curved, 6mm for Variable Angle System
34
KL-9 Ankle System
L10I055
Qty. 1
Screw Holding Forcep for Variable Angle System
L10I056 Qty. 1
Countersink for Variable Angle System
L10I057 Qty. 1
Screw Holding Sleeve for 2.7mm Cortical Screw
L10I058 Qty. 1
Screw Holding Sleeve for 2.7mm Locking Screw
L10I059 Qty. 1
Screw Holding Sleeve for 3.5mm Cortical Screw
L10I060 Qty. 1
Screw Holding Sleeve for 3.5mm Locking Screw
35
KL-9 Ankle System
L10I061
Qty. 3
Instrument Trays for 2.7/3.5mm Variable Angle System Instrument Set
L10I062 Qty. 1
Container for 2.7/3.5mm Variable Angle System Instrument Set
36
NOTE :
KAUL-Medizintechnik GmbH
Königsberger Straße 40, 56269 Dierdorf | Germany
Phone: +49 2689 928299-0 | Fax: +49 2689 928299-9 | Web: www.kaulmed.com
HRB 27578 AG Montabaur | USt-IdNr.: DE299657301
Bankers: Sparkasse Koblenz | IBAN: DE61 5705 0120 0000 3043 45 | BIC: MALADE51KOB