Professional Documents
Culture Documents
BASIC INFORMATION
INPUT PORT
OUTPUT PORT
ENVIRONMENT TEMPERATURE
1
SAFETY INSTRUCTIONS
1. USAGE
(1) Do not use this product near a heat source such as a fire or a
furnace.
(2) Avoid contact with any liquid. Do not immerse the product in
water or get it wet. don't use this product in rain or humid
environment.
(3) Do not use this product in an environment with strong static
electricity/magnetic field.
(4) Do not disassemble the product in any way or pierce the product
with sharp objects.
(5) Avoid using wires or other metal objects that may cause a short
circuit.
(6) Do not use unofficial components or accessories. If you need to
replace any component or accessory, please visit the official channel
for related information.
(7) When using the product, please strictly abide by the operating
temperature specified by this product. If the temperature is too high,
it may cause fire or explosion; if the temperature is too low, the
product performance may be severely impacted, or the product may
cease to function.
(8) Do not pile any heavy objects on the product.
(9) Do not lock the fan forcibly or place the product in an airless or
2
dusty place during use.
(10) Please avoid impact, drop or violent vibration when using the
product. In case of violent impact, immediately turn off the product
and stop using it. Make sure the product is secured during
transportation to avoid impact and strike.
(11) If the product is accidentally dropped into water during use,
please place it in a safe open place and keep away from it until it is
completely dry. The dried product must not be reused and should be
properly disposed of in accordance with Section 2 below. If the
product catches fire, it is recommended that you use a fire
extinguisher in the following order: water or fine mist of water, sand,
fire blanket, dry powder and, finally, a carbon dioxide fire
extinguisher.
(12) Use a dry cloth to remove dirt from the product ports.
(13) Place the product on a flat surface to avoid damage caused by
tipping over. If the product is seriously damaged by tipping, turn it off
immediately, place the battery in an open area, away from
combustibles and people, and deal with it in accordance with local
laws and regulations.
(14) Make sure to keep the product out of the reach of children and
pets.
3
2. DISPOSAL GUIDELINES
4
INTRODUCTION
3. PRODUCT COMPONENTS
AC socket
Ventilation Hole
5
4.OPERATING INSTRUCTIONS
USB SWITCH
Press the USB switch shortly, the indicator lights up , and the output
port can be used at this time. Press the switch again to turn it off and
the indicator turns off. USB-C1 is not limited by this.
It will be automatically turned off if no operation in 30min.
AC SWITCH
Press the AC switch , the indicator lights up, and the AC output port
can be used at this time. Press the switch again to turn it off and the
indicator light goes off. It will be automatically turned off if no
operation in 30min.
*When not in use, press and hold the power switch to turn it off to
reduce power consumption.
USB-C CHARGING
6
FREQUENTLY ASKED Q&A
TROUBLESHOOTING
If an alarm prompt appears on the product display during use,
please unplug the external device and observe whether the alert
disappears. If it doesn't disappear, restart the product. If it does not
disappear after restarting, please stop using it and contact customer
service.
7
PACKAGING LIST