Thickness « 2 em
i
a
mine the minimum amount of cu
m from the pole faces of an clec
lt an effective radius of 20 cm is 2 ssume that
and the magnetomotive force (m1 f trom
with the
distance of
by the
e face is 3 em
net and the magnetic
1000
turns
20cm
Springobtained on a 2.5 A/V", 50 —
Hz, 19.1 — 4"
ted at 50 H.
3.81 — MV" single-phase
Voltage, Current, Power.
kW
EW Winding with HV terminals open-circuited 4
. HV Winding with LV terminals short-circuited 103
HV Winding with LV terminals short-circu
Me) Calculate the parameters of the approximate equivalent cir
high-voltage winding.
Seeee) Calculate the parameters of the approximate equivalent circui t sforme
o low-voltage winding.
{@) With the transformer carrying rated
the power dissipated in the trans!
Sey 120—1 60 —#-= potential transforn hi hk
"high-voltage (primary) winding
(a) Miseumine that the secondary is open-circuited and t
D source, calculate the magnitude anc angle (with
the voltage at the secondary terminals
) Caleulate the magnitude and phase an
Ponnected to the secondary terminals
oad is
Stet 2400: 240 — 1. 60 H- transformer has the { alent circuit parameters:
4 = 7.09
252
See epiyane a 10 — ATK", 0.8 PF — lagging load at rated voltage, calculate: