You are on page 1of 7

Lot Detail

Lot No. : 193590/APP-23/23-24


Lot Description : Supply, Installation, Testing & Commissioning of Outdoor type CCTV System for Azimpur Govt. Colony (Zone- B), Dhaka.

Section 6. Bill of Quantities

Bill of Quantities

Table
Bill of Quantities
Name :
Unit Total Total
Item
Item Code Measurement Unit Price (In figures: Price Price Price
Group Description of Item Quantity (In (In (In
no. (if Unit BDT)
words: figures: words:
any)
BDT) BDT) BDT)
1 N/A N/A Supply and fixing of 32 Channel NETWORK VIDEO Each 3
RECORDER (NVR) of following technical specification or
equivalent :
IP Camera Input:32 channels
Network Bandwidth:Incoming-256 Mbps or above , Outgoing -
128 Mbps or above
Resolution:12MP,8MP, 6MP, 5MP, 4MP, 3MP, 1080p, 1.3MP,
720p, etc.
Video Output:3840 � 2160; 1920 � 1080; 1280 � 1024; 1280
� 720
Video compression:H.265/H.264/MJPEG
Network Protocol:HTTP; HTTPS; TCP/IP; IPv4/IPv6; RTSP;
SMTP; NTP; DHCP; DNS; DDNS; FTP; etc.
Sync Playback:1/4/8/16
Playback Function:1. Play; pause; stop; fast forward; fast
backward; rewind; play by frame
Audio Input:1 channel, RCA connector
Audio Output:1-ch, RCA
HDD:4 SATA interfaces At least 6 TB capacity for each disk
Alarm Input:4 channels
Alarm Output:2 channels
Network:1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet
port
PoE:16 ports (IEEE802.3at/af)
Power Supply:Single, 100V?240V AC, 50 Hz
''Power Consumption:NVR: ≤ 20 W(without HDD) ≤ 185 W
Supported standard IEEE 802.3 af/at
''
''Operating Temperature:'+0�C to +40�C
''
Operating Humidity:10% to 90%
Certifications:CE, UL,FCC
country of origin : USA/Japan /UK/ EU countries or equivalent
accepted/ approved by the Engineer in Charge
2 N/A N/A ''Supply and fixing of 5 MP, Fixed-focal ,Face Detection Nos. 82
Capable IP Bullet CAMERA (including lens, bracket, housing)
of following technical specification or equivalent :
Image Sensor : 1/2.7'''' 5 Megapixel (minimum)progressive
Scan CMOS
Min. Illumination : Color: 0.005 Lux @ (F1.4/F1.6), B/W: 0 Lux
with IR
Shutter Speed : 1/3 s to 1/100,000 s
Wide Dynamic Range : 120 dB
Angle Adjustment : Pan: 0� to 360�, tilt: 0� to 90�, rotate:
0� to 360�
Lens Type and Focal Length : Fixed Focal, 2.8 mm, 3.6mm/4
mm, 6.0 mm
Lens Mount : M12/Board in
Focal Length & FOV : 2.8 mm, horizontal FOV 98�, vertical
FOV 71�,3.6mm~ 4 mm, horizontal FOV 80� vertical FOV
58�,
6 mm, horizontal FOV 51�, vertical FOV 37� or above
''
''Aperture : F1.6 maximum
DORI : 2.8 mm: D: 56m, O: 22 m, R: 11 m, I: 6 m
3.6mm~4 mm: D: 77 m, O: 30 m, R: 15 m, I: 7 m
6 mm: D: 120 m, O: 48 m, R: 24 m, I: 12 m or above
Supplement Light Type : IR
IR Range : minimum 40 m
Max. Resolution : 2592 � 1944
Main Stream : Main Stream: 2592 � 1944 (1 fps?20 fps)
Sub-Stream : 50 Hz: 25 fps (640 � 480, 640 � 360)
Third Stream : Third Stream: 1080P (1 fps?10 fps)
Video Compression : H.265/H.264/H.264+/H.265+/MJPEG
(only supported by sub stream)
Video Bit Rate : 32 Kbps to 8 Mbps
H.264+ : Main stream supports
H.265+ : Main stream supports
Bit Rate Control : CBR/VBR
Region of Interest (ROI) : Off/On (minimum 4 Zone)
''
''Environment Noise Filtering : Yes
Audio Sampling Rate : 8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz
Audio Compression :
G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3/AAC
Simultaneous Live View : Up to 3 channels
API : ONVIF (Profile S/Profile G/Profile T)
Protocols : TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS,
DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS,
IPv4, IPv6, UDP, PPPoE, ARP, SNMP etc.
User/Host : minimum 20 Users
Network Storage : NAS;FTP;SFTP;
Micro SD card 256 GB
Web Browser : IE (versions newer than IE8), Chrome,
Firefox
SNR : ≥ 52 dB
''
''Day/Night Switch : Day, Night, Auto, Schedule
Image Enhancement : BLC/HLC/WDR (120 dB)
Alarm : 1 input, 1 output
Audio : 1 input (line in), 1 output (line out)
On-Board Storage : Micro SD card up to 256 GB
Ethernet Interface : RJ-45 (10/100 Base-T)
Basic Event : Motion detection (human and vehicle targets
classification), video tampering alarm, exception
Smart Event : Face Detection ,Unattended baggage detection,
object removal detection, scene change detection, audio
exception detection ,Line crossing detection, intrusion detection,
region entrance detection, region exiting detection etc.
Face Capture : yes
Power Supply : DC 12V (�30%), PoE (802.3 at /af)
Power Consumption : maximum 12 Watt
Camera Material : Metal
Operating Temperature and humidity : -30 �C to 60 �C (-22
�F to 140 �F). Humidity 95% or less (non-condensing)
''
''Protection : IP 67, IK10
Certifications : CE,UL,FCC
Accepted/ Approved by the Engineer in Charge

''
3 N/A N/A ''Supply and fixing of 2 MP, Outdoor PTZ Camera (including Each 7
lens, bracket, housing) of following technical specification or
equivalent :
Image Sensor : 1/2.8'''' Progressive Scan CMOS , 2 Megapixel
(minimum)
Min. Illumination : At least Color: 0.0186 lux /F1.6), B/W: 0 Lux
with IR
Shutter Speed : 1/3 s to 1/30,000 s
Wide Dynamic Range : 120 dB or above
Focal Length : At least 4.8 to 135 mm
Optical Zoom : 30 x or above
Digital Zoom : 12x
Focal Length & FOV : horizontal FOV 58.3�?2.6�,
Aperture : At least F1.6 - F4.4
Supplement Light Type : IR
IR Range : minimum 180 m
Pan/Tilt range : 0�~360� ; -15�~90� or -90� to 20�( auto
flip)
Pan speed : preset speed :240�/s
Tilt speed : preset speed :160�/s
Presets : minimum 256
Max. Resolution : 1920x1080 or above
Main Stream : Main Stream: 1920x1080 (1 fps?25 fps) with at
least 1 sub-stream
''
''Video Compression : H.265/H.264/MJPEG
Audio Sampling Rate : 8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz
Audio Compression :
G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3/AAC
API : ONVIF (Profile S/Profile G/Profile T)
Protocols : TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS,
DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS,
IPv4, IPv6, UDP, PPPoE, ARP, SNMP etc.
SNR : ≥ 56 dB
Day/Night Switch : Day, Night, Auto, Schedule
Alarm : 1 input, 1 output
Audio : 1 input (line in), 1 output (line out)
On-Board Storage : Micro SD
Ethernet Interface : RJ-45 (10/100 Base-T)
Basic Event : Motion detection ,video tampering alarm
''
''Power Supply : DC 12V /24 V /AC 24 V (�30%), PoE (802.3
at /af)
Power Consumption : maximum 25 Watt
Camera Material : Metal
Operating Temperature and humidity : Temperature :-43 �C to
+50 �C for continuous operation Humidity: 5% to 90% RH non
condensing
Protection : IP 66 or above
Certifications : CE,UL,FCC
country of origin : USA/Japan /UK/ EU countries or equivalent
accepted/ approved by the Engineer in Charge
''
4 N/A N/A ''Supply and fixing of Network Keyboard for PTZ cameras of Nos. 3
following technical specification or equivalent :
Keyboard Key panel
: Electromechanical
Joystick : 3-axis(minimum), vector-solving, with twisting, return
to-center head
Keyboard Connector
: RJ-45, RS232, RS485, RS422 (reserved), USB
Keyboard Communication
: Direct Mode, Network Mode
Display
: LCD, 75.2mm�33.85mm (minimum)
Minimum Number of Users : 16
Maximum no. of Devices : 1000
Power supply : input 100V~240V 50Hz/60Hz, output
DC12V/2A
Power Consumption : ≤ 5 W
Working temperature : -10�C ~ +55�C (+14�F ~
+131�F),10 to 90 % (RH)
Certifications : CE
Accepted/ Approved by the Engineer in Charge
''
5 N/A N/A Supply and fixing of 43'' Full HD Monitor of following technical Nos. 6
specification or equivalent :
Screen Size:43''
Resolution:1920�1080 (FHD)
HDR (High Dynamic Range):HDR
HDR 10+:Support
Contrast Enhancer:Yes
Auto Motion Plus:Yes
Dolby Digital Plus:Yes
Sound Output (RMS):20W
Speaker Type:2CH
Active Noise Reduction: yes
Aspect ratio:'4:3 /16:9
Wide Screen:yes
Sound Mirroring:Yes
WiFi Direct:Yes
HDMI:2 (with minimum 3 meter HDMI Cable)
USB:1
Power Supply:AC220-240V 50/60Hz
Power Consumption (Max):115 W
Accepted/ Approved by the Engineer in Charge
6 N/A N/A ''Supply and fixing of 8 TB Surveillance Hard Disk Drive for Nos 10
NVR of following specification or equivalent: Storage 8TB ,
Form Factor (Inch) 3.5 Inch
Interface. SATA 6Gb/s
RPM 7200 RPM
Buffer 256MB
Data Transfer Rates : 235MB/s or higher
MTBF 1,000,000 hours or higher
Warranty 3 years ( to be attained from the supplier separately)
Accepted/ Approved by the Engineer in Charge''
7 N/A N/A ''Supply and Installation of 16 port PoE Managed Switch of the Nos 38
following specification or equivalent-
VLAN Support for up to 4,094 VLANs simultaneously
Relay of DHCP traffic to DHCP server in different VLAN;
works with DHCP
Layer 2 switching
Switching capacity and forwarding rate minimum 8.8 Gbps
Packet Forwarding Rate ; minimum 5.36 Mpps
PoE Standard -IEEE 802.3af, IEEE 802.3at
Max. Port Power 30 W
PoE Power Budget: minimum 190 W
Port Number16 � Gigabit PoE ports, and 2 � Gigabit fiber
optical ports
packet buffer 2.75 Mbit or above
Communication Standard IEEE802.3; IEEE802.3u;
IEEE802.3x; IEEE 802.3ab;IEEE 802.3z
Accepted/ Approved by the Engineer in Charge''
8 N/A N/A ''Providing and fixing of media converter of the following Nos 45
specification or equivalent - Standards and Protocols IEEE
802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Basic Function Extends fiber distance up to 9.3 miles (15km)
Ports 1 x 1000M dual SC/UPC port 1 x 10/100/1000M RJ45
port (Auto MDI/MDIX)
Wave Length 1310nm
Network Media 1000BASE-LX Single-mode Fiber ''
''Network Media 1000BASE-T UTP category 5, 5e cable
(maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
LED Indicators PWR, Link/Act
Power Supply External Power Adapter
Max Power Consumption 1.8W
Safety & Emission FCC, CE, RoHS Environment
Operating Temperature: 0 ~40 (32 ~104 )
Operating Humidity: 10%~90% non-condensing
Accepted/ Approved by the Engineer in Charge''
9 N/A N/A ''Providing and fixing of Ethernet Surge Protector of the Nos 89
following specification or equivalent -
Protects up to 10 kV surge
Supports data rates of up to 1 Gbps
Robust and waterproof,IP66 rated
Can be wall or pole mounted
including necessary earthing up to 10 ft
Accepted/ Approved by The Engineer in charge.''
10 N/A N/A ''Supply, installation of Network Rack of size 32U with following Nos 1
features or equivalent as per direction of the Engineer in
charge.
''
''Dimension: 1000 mm x 600 mm x 32U (D X W X H)
Front Door: Tempered Glass side with Advanced Swivel Lock
Rear Door: Hex-vented hole perforated rear door to improve
cooling efficiency with Lockable and removable options.
Side Panels: Solid side panels with security key locks and quick
release slide latches
Bottom Plate: Heavy duty bottom plate with strengthen RIB
with 150 Kgs loading capacity
Anti-Dust Cable Entry: Convenient cable brush panel on top and
bottom for both cable entry and anti-dust.
Cooling Fan: Pre-installed 4pcs FAN with UK Power Cord on
Top
''
11 N/A N/A Supply of following uninterruptible power supply (UPS) Nos 3
complete with central processing unit suitable for input supply
160 - 275 volt AC single phase 50 Hz for output voltage 220 volt
� 1%, 50 Hz single phase having protection for lightning &
surge, blackout, over & under voltage, overload, battery low
and over-charge etc. complete as required as per sample
approved by the Engineer.
Back-up time : 120 minutes at full load
2 KVA
12 N/A N/A IDF with fiber & GE patch panel Nos 3
Supply, installation, testing & commissioning of IDF with fiber &
GE patch panel with following specification as per direction of
the Engineer in charge.
Specification:
Industry-made brand floor mount IDF (Intermediate Distribution
Facility) of minimum 18U size with fiber patch panel (6 port rack
mount loaded with SC adapters) and GE Patch Panel (24Port
category-6 standard) of appropriate type & size
(accommodating access switch, UPS, patch cord of
appropriate type & size etc..) including power strip, wire
manager, necessary cable ties etc.. complete with all required
accessories.
13 N/A N/A FACE PLATE (Cat-6 UTP) Nos 38
''Supply, installation, testing & commissioning face plate (Cat-6
UTP) with following specification as per direction of the
Engineer in charge.
Specification : Face plate with MK box (plastic type), dual
module with cover and all required accessories.''
14 N/A N/A ''Supply, installation of patch cord (Cat-6 UTP) with following Nos 134
specification as per direction of the Engineer in charge.
Specification : Industry-made brand 3 meters patch cord of
Cat-6 UTP cable with RJ-45 connectors at both ends and all
required accessories.''
15 N/A N/A Supply, installation, testing & commissioning of UTP (unshielded Mtrs 1800
twisted pair) Cat-6 cable with following specification or
equivalent as per direction of the Engineer in charge.
''Physical specifications :
Weight : 25.6 lbs. /1,000 ft. (38.2 kg/km)
Jacket thickness : 0.022 in (0.56 mm)
Outside diameter : 0.232 in (5.89 mm)
Maximum pulling tension : 25 lbs. (11.34 kg)
Operating temperature : - 4�F to 1 40�F (-20�C to 60�C)
Gauge : 23 AWG
''
''Electrical specifications :
NVP (fastest pair @ 10 MHz) : 69%
Maximum DC resistance : 7.61 ohms / 100 m
Maximum DC resistance unbalance : 3%
Mutual capacitance at 1 kHz : 5.6 nF/100 m
ANSI/TIA-568-C.2 category 6.
ISO/IEC 11 801 : 2002 (edition 2) class E
CENELEC EN50173 : 2002 (edition 2) category 6
ETL : CMR
''
16 N/A N/A ''Supply, installation, testing & commissioning of 6 core Mtrs 9000
Multimode fiber optic cable (outdoor) with following specification
or equivalent as per direction of the Engineer in charge.
''
Specification: General 6 core single mode (OS2), Single
Jacket, Corrugated steel tape armor, Gel-free, Stranded Loose
tube Fiber cable. Qualification Standards ANSI/ICEA S-87-
640, EN 187105, Telcordia GR-20. Compliance ITU-T
G.652.D, ITU-T G.657.A1 (bend insensitive) and TIA-
492CAAB (OS2)
492CAAB (OS2)
''Construction Materials:
a) Jacket Material: PE / MDPE
b) Environmental space: Aerial, lashed and buried applications.
c) Strength member, central: Di-electric Rod
d) Strength member, peripheral: Water swellable tape
e) Number of fibers per tube: 6
f) Jacket UV Resistance: UV Stabilized
g) Subunit Type: 2.5mm Gel-free buffer tubes
h) No. of Rip cords: 2''
''Mechanical Specifications:
a) Cable Diameter: Not more than 12.00 mm
b) Cable Weight: 100 ? 120 kg/km
c) Minimum Bend Radius, loaded: 17.5 cm
d) Minimum Bend Radius, unloaded: 11.7 cm
e) Tensile Load, long term, Max: 800 N or better
f) Tensile Load, short term, Max: 2700 N or better
g) Vertical Rise: upto 700 mtr
h) Operating Temperature: -40 degree Celsius to +70
degreeCelsius''
''Mechanical Test Specifications:
a) Compression: 44 N/mm (as per IEC 60794-1 E3)
b) Flex: 35 Cycles (as per IEC 60794-1 E6)
c) Impact: 4.41 N-m (as per IEC 60794-1 E4)
d) Water Penetration Test Method: 24 h (IEC 60794-1 F5)''
''Optical Specifications:
Attenuation, Maximum
a) 0.22 dB/km @ 1550 nm
b) 0.25 dB/km @ 1490 nm
c) 0.31 dB/km @ 1385 nm
d) 0.34 dB/km @ 1310 nm''
Factory Test report Shall be available publicly against unique
tracking ID on cable, at OEM website.
17 N/A N/A ''Supply, installation, testing & commissioning of fiber optic SC Nos 528
(subscriber connector) connector with following specification.
''
''Specification :
Industry-made brand 1000 base - SX fiber optic connector to
be used for 50 / 125mm (6-core) multimode fiber optic cable.''
18 N/A N/A ''Supply, installation of patch cord (multimode FO) with following Nos 60
specification as per direction of the Engineer in charge.
''
''Specification :
Industry-made brand SC-LC duplex 3 (three) meters patch
cord of multimode fiber optic cable with appropriate FO
connectors at both ends and all required accessories.''
19 N/A N/A Supply, installation, testing & commissioning patch panel (fiber) Nos 34
with following specification as per direction of the Engineer in
charge.
''Specification :
24 port fiber patch panel, rack mount loaded with SC adapters
etc.. complete and all required accessories. (This item shall be
installed within the existing IDF containing a 24 port UTP patch
panel).''
20 N/A N/A Providing & laying of the following PVC insulated & sheathed Mtrs 6000
cable (NYY) / (XLPE) insulated & PVC sheathed cable (2XY)
with PVC insulated Green / Yellow bi-colour ECC wire (BYA)
connecting at both ends, through PVC pipe & accessories in the
following manner. All electrical contacts shall be of brass /
copper connected through connector or soldering (no twisting
shall be allowed) and cables shall be manufactured and tested
according to IEC / BS / VDE standards along with relevant
BDS standard as per detailed specification mentioned in
Annexure-1. The work shall be carried out as per direction &
approval of the Engineer In Charge.
In kutcha ground by cutting 45.70 cm width x 91.40 cm depth
trench with necessary brick or tile protection and mending the
damages good by refilling trench with proper compaction;
In pucca floor through PVC pipe by cutting trench of necessary
size and mending the damages good by brick soling, 75 mm
(1:2:4) CC work with neat cement finishing etc.
Cable manufacturer(s) must have valid type test certificate
(within last seven years) from internationally accredited
laboratory (like CPRI, KEMA etc.) accepted / approved by the
Engineer In Charge.
IC-2x2.5 sqmm (NYY / 2XY) with 2.5 sqmm (BYA) ECC wire
through the PVC pipe of minimum inner dia 20 mm & wall
thickness 1.5 mm
In kutcha ground
21 N/A N/A In pucca floor Mtrs 800

22 N/A N/A IC-2x10 sqmm (NYY / 2XY) with 10 sqmm (BYA) ECC wire Mtrs 700
through the PVC pipe of minimum inner dia 30 mm & wall
thickness 1.9 mm
In kutcha ground
23 N/A N/A In pucca floor Mtrs 300

24 N/A N/A 1C-4x10 sqmm (NYY / 2XY) with 10 sqmm (BYA) ECC wire Mtrs 100
through PVC pipe of minimum inner dia 40 mm having wall
thickness of 2.2 mm
In kutcha ground
25 N/A N/A In pucca floor Mtrs 20

26 N/A N/A Providing & laying of following PVC pipe (best quality PVC pipe Mtrs 9000
of reputed manufacturer) embedded in wall / column / ceiling /
floor etc. with all accessories, 18 SWG GP sheet pull box with
3 mm thick ebonite sheet cover, fixing materials etc. as required
including mending the damages good.
Minimum inner dia 30 mm & minimum wall thickness 1.9 mm.
27 N/A N/A Providing following seamless tubular pole fabricated with 4.76 Nos 38
mm (3/16'') thick MS sheet having different sections with
152.40 mm long MS reducing collar joint complete with MS
base plate, top cover & duly painted with two coats of superior
quality paint over two prime coats of red oxide etc. as required.
Total length-30', Inner dia-6'', Length-20', Thickness-4mm, Inner
dia-4'', Length-10', Base plate 2x2x6mm.
28 N/A N/A Erection of following tubular pole up to 1524 mm (5') depth by Nos 38
placing the pole base on one layer of 1st. class brick flat soling
over 76.2 mm (3?) sand bedding and making 1:2:4 (1.5' x 1.5' x
6' ) CC work around the pole up to 5' below GL and 1' above
GL,12.5 mm (1/2'') thick cement plaster with neat cement
finishing over concrete surface above GL including proper
curing, excavation & refilling and ramming the loose soil etc. as
required.
9144 mm (30') long MS / GI / RCC / spun PC pole
29 N/A N/A Providing and fixing single phase distribution board (SPDB) Nos 2
[concealed / surface] having the following components and
specifications: [Fig : 4.2]
''1. Steel board : Approximate size: 20''''x15''''x4''''
MS sheet : 18SWG with hinged type door and locking
arrangement duly painted with powder coating with epoxy
polyester resin on all surfaces of board (gray / off-white) etc. In
front side there will be tempered thick fiber glass of minimum 8
mm thickness with rubber gaskets to observe the inside
arrangement.''
''2. Copper bar: Approximate size: 10''''x 1''''x 3mm(2 nos) and
6''''x 1''''x 3mm, (1 no) mounted on insulator at both ends,
capacity: 60-100A .
''
''3. 1 No. DPMCB(main control) and following nos.SPMCB,
DPMCB and SPMCB Manufactured / Assembled and tested in
accordance with relevant BDS IEC 60898-1:2016 and IEC /
VDE / NEMA / BS / JIS standard.
Minimum breaking capacity 6/10 KA with thermal overcurrent
and instantaneous electromagnetic short circuit release.''
''4. Loop Cable [from phase bar to SPMCB(circuit & power)]
Size: 1C-1x2.5 sq mm (BYM) with DPMCB and SPMCBs
accepted / approved by the Engineer-in-charge. ''
''10-way SPDB
Incoming : 1x60A/63A DPMCB (10 KA)
Outgoing : 10x5-10A SPMCB (10 KA)''
30 N/A N/A Providing & fixing on a prepared board 250 volt grade following Nos 24
single pole miniature circuit breaker (SPMCBs) having minimum
breaking capacity 6-KA / 10 KA with thermal over-current and
instantaneous electromagnetic short circuit release provision as
per BDS IEC and IEC / VDE / NEMA / BS / JIS standard.
SPMCBs accepted / approved by the Engineer-in-charge.
a) 6 Amps (minimum 6 KA) MCB
31 N/A N/A b) 60/63 Amps (minimum 10 KA) MCB Nos 2

32 N/A N/A Providing and fixing 500 V 3-phase busbar system assembled Nos 1
in prelaid board with porcelain insulators. There will be equal
size holes on every bar at 0.5'' interval and bar to bar gap shall
be 2'' - 3''.
60 - 100 Amps.
''Copper flat bar (5 nos) : 4 nos 9'''' x1''''x3mm and 1 no
4''''x1''''x4mm for earthing mounted on insulator at both ends
individually.
''
33 N/A N/A Providing & fixing on a prepared board 500 volt grade following Nos 2
triple-pole molded case circuit breaker (TPMCCB) with thermal
over-current and instantaneous electromagnetic short circuit
release provision, Manufactured / Assembled and tested in
accordance with IEC / VDE / NEMA / BS / JIS along with
relevant BDS IEC standard.
TPMCCBs accepted / approved by the Engineer-in-charge.
60/63 Amps. (Minimum 10-KA)
34 N/A N/A Supplying and fixing of almirah type 18 SWG metal board of Sqm 5.99
depth 228mm (6?) duly painted with powder coating with epoxy
polyester resin on all surfaces of board (gray / off-white) having
built in push type / suitable locking arrangement including metal
bridges of suitable size for fixing of all electrical control devices
complete with suitable anchoring arrangement in wall / column
and keeping provision
''for cable inlets and exits as required (only front surface of the
board will be considered for measurement) accepted/approved
by the Engineer-in-charge.
''
a) (3'-0''x 2'-6'')x1 =7.50 Sft(For MDB)
b) (1'-6''x 1'-0'')x38 =57.00 Sft(For MC, PoE Switch, ESP, TJ
Box, Optical Fiber etc.)
= 64.50 = 5.99 Sqm
Normal board (without water tight)
35 N/A N/A Installation, testing, commissioning of entire CCTV up to 32 Nos 3
Channel
Grand
Total :
* Note: All applicable taxes, custom duties, VAT and other levies payable by the Contractor under the Contract shall be included in the unit prices
submitted by the Tenderer.

* Note: All applicable taxes, custom duties, VAT and other levies payable by the Contractor under the Contract shall be included in the unit prices
submitted by the Tenderer.

You might also like