Water Pump Catagloue and Technical Data

You might also like

You are on page 1of 23

XIAMEN STARFLO INDUSTRY AND TRADE CO.

LTD
Add:Room 811,JinZhu Creactive Industry Park ,No 13 Zhongwan Road,Jimen Strict,Xiamen,China
Contact Person : Carly Email: sales1@xmstarflo.com

FLO SERIES DIAPHRAGM PUMP, SPRAYER PUMP

Reciprocating Diaphragm made of thermoplastic :Santoprene


Duty cycle : working intermittent.
Housing: PA66
Check valve made : EPDM/VITON
Check valve spring Stainless steel
Port size:9.5mm(3/8”) Hose barb
Self-priming so pump can be located above supply tank
Flow rate:1.13GPM(4.3L/Min.)Nominal @ open flow
Liquid temperate:60 centigrade degree

Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)


FLO-2201 12 2 55 1.8
FLO-2202 12 3.8 35 3
FLO-2202-1 12 4.3 35 3.5
FLO-2203 12 2.6 70 2.1
FLO-2203-1 12 3.1 70 2.2
FLO-2202A 12 4 80 2.6
FLO-2401 24 2 55 0.9
FLO-2402 24 3.8 35 1.5
FLO-2403 24 2.6 70 1
FLO-2402A 24 4 80 1.3
Inlets size: 3/8''hose barb, thread
Outlets size: 3/8''hose barb, thread
dimension/pc: 18.5x11x6.5cm
Net weight/pc: 0.64kg
Gross weight/pc: 0.72kg
Carton dimension(50pcs): 56.5x38.5x36.5cm

www.starflopump.com
FL SERIES HIGH FLOW
Reciprocating Diaphragm made of thermoplastic :Santoprene
Duty cycle : working intermittent.
Housing:casted Iron
Check valve made : EPDM/VITON
Check valve spring Stainless steel
Port size:(12.5mm)1/2” Hose barb,3/4'' NPT thread
Built -in thermal protector at 120°C
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Motor voltage:12V,24V DC,115V,220V AC
Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)
FL-30 12 10 17 2.2
FL-31 24 10 17 1.5
FL-35 12 12.5 35 7
FL-34 24 12.5 35 4
FL-40 12 17 40 9.2
FL-44 24 17 40 5.6
TECHNICAL DATA OF AC VOLTAGE
Model Volt FLow(L/Min) Pressure(PSI) Amp Draw(A)
FL-33 115 12.5 35 0.5
FL-32 220 12.5 35 0.4
FL-41 115 17 40 0.5
FL-43 220 17 40 0.8
Inlets size: 1/2'' Hose barb with filter
Outlets size: 1/2” Hose barb,3/4'' NPT thread
dimension/pc FL-3: 33.5x12.5x10.5cm
Net weight/pc FL-3: 1.9kg
Gross weight/pc FL-3: 2.4kg
Carton dimension(10pcs FL-3
Series): 63x29x22.5cm
dimension/pc FL-4: 37x12.5x10.5cm
Net weight/pc Shape FL-4: 2.5kg
Gross weight/pc FL-4: 2.9kg
Carton dimension(10pcs FL-4
Series): 64x39x22cm

www.starflopump.com
DP SERIES PUMP-HIGH PRESSURE

Duty cycle : working intermittent.


Housing:casted Iron
Check valve made : EPDM/Viton
Check valve spring Stainless steel
Port size:9.5mm(3/8”) Hose barb,1/2''NPT thread
Built -in thermal protector at 120°C
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Motor voltage:12V,24V DC,115V,220V AC

Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)


DP-60 12 4.6 60 7
DP-60B 24 4.5 60 4
DP-80 12 5.5 80 8
DP-100 12 5.5 100 9
DP-120 12 5.5 120 9.5
DP-120B 24 5.3 120 4.5
DP-160 12 5.5 160 10.5
DP-160B 24 5.5 160 4.2
DP-100M 230 5.5 100 0.6
DP-160S 120 5.5 160 1
DP-120M 220 5.5 120 0.5
DP-160M 220 5.5 160 0.55
Inlets size: 3/8''hose barb, 1/2''NPT thread
Outlets size: 3/8''hose barb, 1/2''NPT thread
dimension/pc: 26.5x12x10.5cm
DC gross weight/pc: 2.7kg
AC gross weight/pc: 3.3kg
Carton dimension(10pcs AC
Voltage): 64x39x22cm
Carton dimension(10pcs DC
Voltage): 63x29x22.5cm

www.starflopump.com
FL-55 SERIES DIAPHRAGM PUMP

Reciprocating Diaphragm made of thermoplastic :Santoprene


Duty cycle : working intermittent.
Housing:casted Iron
Check valve made : EPDM
Check valve spring Stainless steel
Port size:(12.5mm)1/2” Hose barb,3/4'' NPT thread
Built -in thermal protector at 120°C
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Motor voltage:12V,24v (Other volatage consultant us)
Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)
FL-55 12 20 55 16
FL-200 12 10 200 15
Inlets size: 1/2'' Hose barb with filter
Outlets size: 1/2” Hose barb,3/4'' NPT thread
dimension/pc FL-55: 240*135*138mm
Net weight/pc FL-55: 3.4kg
Gross weight/pc FL-55: 3.5kg

FL-30 SERIES SMALL PUMP HIGH PRESSURE


Reciprocating Diaphragm made of thermoplastic :Santoprene
Duty cycle : working intermittent.
Housing:stainless iron
Check valve made : EPDM
Check valve spring Stainless steel
Port size:9.5mm(3/8”) Hose barb
Snap-in port * 1/2'' NPT thread elbow
Add pressure release valve & switch pressure
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Motor voltage:12V,24V,36V,48V DC.
Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)
FL-3202 12 5.1 80 4.5
FL-3402 24 5.1 80 2.8
FL-3203 12 5.1 100 5
FL-3403 24 5.1 100 3
FL-3206 12 6 65 6
Inlets size: 3/8''hose barb, thread
Outlets size: 3/8''hose barb, thread
Dimension/pc: 20x12x8cm
Net weight/pc: 1.13kg
Gross weight/pc: 1.22kg
Carton dimension(30pcs): 55x40x28cm

www.starflopump.com
SF33-45-12 SERIES WATER PUMP

Reciprocating Diaphragm made of thermoplastic :Santoprene


Duty cycle : working intermittent
Housing:casted Iron
Check valve made : EPDM
Check valve spring Stainless steel
Port size: 1/2" -14MNPT
Add pressure release valve & switch pressure
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Diaphragm:Santoprene
Leads:16AWG,13" (33cm) long with 2-pin connector /Leads
Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)
SF33-45-12 12 11.6 45 8
SF33-45-24 24 11.6 45 4
Inlets size: 1/2" -14MNPT
Outlets size: 1/2" -14MNPT
dimension/pc : 26x14x12.5cm
dimension/carton(8pcs per carton) : 53.5x31.5x28.5cm
Net weight/pc : 1.9kg
Gross weight/pc: 2.31kg

SF42-55-12 SERIES WATER PUMP


Reciprocating Diaphragm made of thermoplastic :Santoprene
Duty cycle : working intermittent
Housing:casted Iron
Check valve made : EPDM
Check valve spring Stainless steel
Port size: 1/2" -14MNPT
Add pressure release valve & switch pressure
Self-priming so pump can be located above supply tank
Liquid temperate: 60°C
Diaphragm:Santoprene
Leads:16AWG,13" (33cm) long with 2-pin connector /Leads
Model Volt Flow(L/Min) Pressure(PSI) Amp Draw(A)
SF42-55-12 12 11.3 55 7.5
SF42-55-24 24 11.3 55 4
Inlets size: 1/2" -14MNPT
Outlets size: 1/2" -14MNPT

www.starflopump.com
dimension/pc : 26x14x12.5cm
dimension/carton(8pcs per carton) : 53.5x31.5x28.5cm
Net weight/pc : 1.9kg
Gross weight/pc: 2.31kg

www.starflopump.com
12V FAUCET / TAP & PUMP KIT Technical Data

Description

Economical 12 volt galley pump system supplied complete with chrome plated 12 volt electric faucet &
pump - so pump can be automatically activated by the toggle switch on the faucet. The pump is 'SELF-
PRIMING' so it can be mounted virtually anywhere in your Boat/Caravan/RV etc... up to 1.5m above the
water supply. Delivers up to 4.3 litres per minute at 5 metre head. Suits 10mm hose.

DC Pumps details:
ELECTRIC

TECHNICAL DATA ✧ 2 Chamber Diaphragm


✧ (3/8”) 10mm Hose barb
✧ Model: FLO-2202 ✧ Liquid: 60°C Max
✧ Volts: 12 ✧ Self-priming: Vertical within 1.5M
✧ Flow (L/Min): 4.3 ✧ Pressure PSI: 35 PSI
✧ Pressure (PSI): 35 ✧ Run Dry: Yes
✧ Amp Draw (A): 3.5 ✧ Leads: 16 AWG Red + Black
✧ Protection: Thermal Overload, Automatic Restart
SPECIAL FUNCTIONS ✧ Motor: 12V Permanent Magnet, Intermittent Duty
• Durable rubber feet for reduced
vibration
• Quiet Performance with long life
• Runs dry without damage
• Self Priming
• Built-in Check Valve
• Easy Installation

Electric Faucet details

✧ Full 360 degree rotation


Suits 10mm ID hose
Chrome mirror finish
Marine pump set complete with
mounting screws & faucet.
Compact 12v electric pump
operates quietly and easy to
install
Zinc-alloy metal faucet base and
stainless steel swing spout
Built-in 12v toggle switch in on the
faucet base-To automatically
activate pump
Built in 15amp max on/off switch

Pump Dimension

www.starflopump.com
www.starflopump.com
Washdown Pump Kit Technical Data

Self priming 12 volt deck washdown pump delivering up to 20 litres per minute and pressure of up to
70psi.Incorporates a self contained shut off switch,so by connecting the outlet hose to a garden hose fitted
with the pistol grip nozzle supplied,you can have high pressure water on demand by activating the nozzle.

Features:

✧ Complete washdown pump kit with spray nozzle and coiled hose
✧ Powerful 5-chamber positive displacement diaphragm pump, for smooth and quiet flow
✧ Self-priming 12V pump with automatic pressure switch control - automatically turns on and off as you
turn nozzle on and off
✧ 18.9 Litres per minute (5 GPM) capacity flow, and high 70 PSI pressure
✧ Professional grade pump - Ideal for cleaning boats, fish boxes, anchor wells, dinghies and caravans
✧ Multi-step corrosion protection and seamless motor body for enhanced protection
✧ Rubber mounting feet for corrosion protection and noise reduction
✧ Santorprene diaphragm - Can run dry without damage
✧ Thermal overload and ignition protection
✧ Easy connecting system
✧ Suits liquid with weak acid/alkaline,weed sprayers & salt water
Technical Data:

Model Volt Flow rateMax Pressure Max Amps(A) Package N.W/G.W(kgs)


FL-35S 12Vdc 20LPM 70PSI 20.0A 30*26*25.5cm 3.9/4.35

Full system Including:

Full system Including


*1pc 12v pump
*1pc Coli hose—Suits 12mm (1/2") diam. hose
*1pc Quick connect adapter
*1pc Inlet filter/strainer
*1pc Trigger nozzle—Open pressure 55 PSI
(3.8 bar)
*1pc Instruction manual
*2pcs Straight barbed fittings
*2pcs Brass fittings

PUMP SIZE:

www.starflopump.com
Macerator Pump technical data

STARFLO Macerator pump is designed specifically for sanitation waste and fish box evacuations.
This high-powered pump incorporates our high quality motor with a new seamless shell and splash proof
design.
The Macerator features a premium impeller design and includes o-ring sealed end bells with a sealed
manual turn key to withstand the harsh marine environment.

Specification

✧ Pump Headm:2 chambers


✧ pen Flow:49.2L/min
✧ Inlet/ Outlet size:2”(50mm)/1”(25mm)
✧ Motor Configuration lead wires 2-pin connector
✧ 12GPM(45.00LPM)
✧ Self Priming
✧ Seamless Motor Shell
✧ O-Ring Shaft Seal
✧ Heavy Duty Shaft Seal
✧ Manual Turn Key With Rear O-Ring Seal
✧ Innovative Internal Housing Design
✧ Dual Blade Design
✧ Premium Impeller
✧ Ignition Protection
✧ Thermally Protected
✧ Available in 12, 24, 115 and 230 Volts

Open Flow Amps


Model Volts (dc) Packing Size(mm) N.W/G.W(kg)
gpm(lpm) Max

FL-65A 12 Vdc 12.0(45.0) 9 320×135×110 2.10 / 2.40

FL-65B 24 Vdc 12.0(45.0) 6 320×135×110 2.10 / 2.40

www.starflopump.com
Solar Submersible Pump for Deep Well Technical Data
Features:
✧ Long-life 24VDC operation
✧ For 4'' wells or larger
✧ Runs dry without damage
✧ 50 mesh stainless steel inlet screen
✧ State of the art solid diaphragm
✧ Quick disconnect with "Watertight-Gland" Design Pat Pend
✧ Corrosion-proof housing with stainless-steel fasteners
Description:
Pump Design: Positive Displacement 3 Chamber
Diaphragm Pump
Motor: Permanent Magnet, Thermally Protected
Voltage:24VDC Nominal
Amps:4.0A Maximum
Internal Bypass: 105-110PSI Max.(7.2-7.5 Bars)
Maximum Lift : 230 feet Maximum (70 Meters)
Maximum Submersion:100 Feet Maximum (30 meters)
Outlet Port:1/2'' (12.7mm) Barbed Fitting
Inlet:50Mesh Stainless Seel Screen
Materials:High Strength Engineered Plastics,
Stainless Steel Fasteners
Typical Applications:Potable Water Well Pump
Max.
Volt( Submersibl
Model V) Flow Rate Max.Lift e Amps N.W/G.W
(LPM) (M) (M) (A) (kgs)
SF1240-30 12 6 70 30 8 2.9/3.0
SF2440-30 24 6 70 30 4 2.9/3.0

THE WHOLE SOLAR WATER PUMP SYSTEM


(SOALR PUMP+CONTROLLER+SOLAR PANEL)

New Design Solar Submersible Pump Technical Data

www.starflopump.com
A high-efficiency positive-displacement diaphragm submersible solar water
pump. The system is designed for off-grid households as a near zero recurring
cost replacement for diesel.This pump max flow rate can be
720LPH(189GPH), the Max head can be 100M.
Its unique water-tight power connector stops water wicking and prevents
potential condensation problems.
Great for livestock watering.irrigation,pondaeration,remote homes and cabins.

Features:
Stainless steel submersible pump
Built thermal protector
Low power,high effect
Small volume,widely used
Large flow,high lift
For 4" wells or larger
Quick disconnect with "Watertight-Gland" Design Pat Pend
Corrosion-proof housing with stainless-steel fastener
Run dry without damage
State of the art solid diaphragm
Stainless Steel Pump case
Pump Design: Positive Displacement 3 Chamber Diaphragm Pump
Motor: Permanent Magnet Thermally Protected
Wire Length:3M

Advantage

Submersible pump with 100 meter (328 feet) maximum pumping head
60% peak efficiency
Suitable for sprinkler or drip irrigation systems
Up to 720 liters per hour or 7,200 liters per day with recommended battery
bank
24V DC motor compatible with most commercially-available solar panels,
charge controllers and lead acid batteries

TECHNICAL DATA

Pump Design Positive Displacement 3 Chamber Diaphragm Pump


Motor Permanent Magnet, Thermally Protected
Voltage 24V / 12V DC Nominal
Amps: 9.2A Max./11.3AMax.
Internal Bypass 105-110PSI Max.(7.2-7.5 BARS)
Maximum Lift 328 Feet Maximum (100m)
Maximum Submerion 100 Feet Maximum (30m)
Outlet Port 1/2''(12.7mm) Barbed Fitting for 1/2'' (12.7mm) I.D.Tubing
Inlet 50 Mesh Stainless Steel screen
Materials High Strength Engineered Plastics, Stainless Steel Fasteners
Potable Water Well Pump

Model Volt Flow Rate Lift(M) Amps(A) Body Cover

SF1280-30 12V 12LPM 100M 11.3A Stainless Steel


Body

SF2480-30 24V 12LPM 100M 9.2A Stainless Steel


Body

www.starflopump.com
High Flow Rate 5 Chamber Diaphragm Pumps Technical data
Specially for Adblue liquid

The HV series 5 chamber diaphragm pumps with the Permanent magnet motor and continuous duty cycle,
self-priming ability can be more than 3 meters. The pumps can be applied for fresh water, weak
acid&basicity liquid, and specially for Adblue liquid.

Features:
✧ Permanent magnet and continuous duty.
✧ Built-in pressure switch automatically starts and stops.
✧ Pump when faucets is opened.
✧ Self-priming 3m so pump can be located above water tank.
✧ Runs dry for extended periods of time without damage.
✧ Hold excellent motor keep stable temperature of pump body.

Open Flow
Voltage Pressure Amps Speed N.W/G.W
Items No rate
(v) PSI (A) (rpm) (kg)
(L/min)
HV-25A 12Vdc 20-25 60-80 10.0 2700 4/4.5
HV-25B 24Vdc 20-25 60-80 6.0 2700 4/4.5
HV-25M 230Vac 20-25 60-80 1.0 2700 4/4.5
HV-25S 115Vac 20-25 60-80 1.5 2900 4/4.5
HV-30A 12Vdc 30-35 40 15.0 2800 5/5.5
HV-30B 24Vdc 30-35 40 7.5 2800 5/5.5
HV-30S 115Vac 30-35 40 4.0 3400 6/6.5
HV-30M 230Vac 30-35 40 1.5 2900 6/6.5
HV-40S 115Vac 40 25 4.2 3400 6/6.5
HV-40M 230Vac 40 25 1.8 2900 6/6.5
HV-50S 115Vac 50 25 4.5 3400 6/6.5
HV-50M 230Vac 50 25 2.0 2900 6/6.5

AUS32/Adblue Sytem/Urea Solution

www.starflopump.com
Item No Description Images

Automatic Trigger nozzle with safety cut out


Adblue automatic valve
nozzles Materials of construction stainless steel,
viton
Fitting:3/4'' BSPP
Flow range:0~60L/min
Max.pressure:5 bar

Filling Nozzle manual Trigger Nozzle


Adblue Manual
Fittings:19mm barb
Nozzles
Flow range:0~80L/min
Max.pressure:3.5Bar
Type:Inline turbine meter polyamide body
Flow range:10~120L/min
Adblue meter(K24) Accuracy:+-1%
Pressure:10bar
Connections:BSPT 1'' or NPT1''
Size:19mm ID transfer hose supplied
complete with 1''BSPT
Type:EPDM
Adblue EPDM hose
Internal diameter:19mm
Wall Thickness:4mm
Flow range:0~60L/min
Type: Female coupling
Fitting:3/4'' BSPP
Sec Suction Coupling Flow(max): 40L/min (0.6bar max.pressure
drop)
Pressure(max.2bar)

Volt: 12v 24v DC/115v 230v AC ,


Adblue pump Flow: 30L/m,40L/m,50L/min
Self priming: More than 3 meters
Port size: Hose tail connection 3/4'' 1''

Design specially for this system


Bracket Set Bracket set material: Iron
Nozzle holder

www.starflopump.com
BW SERIES BOTTLED WATER SYSTEM TECHNICAL DATA
FOR HOME AND COMMERCIAL APPLIANCES
Voltage: 115V & 230V AC; 12V DC
Cycle: 50/60 HZ, for AC models

Duty cycle :Working intermittent


Maximum Flow: 1.0 GPM(3.8L/min)
Maximum Pressure:40PSI(2.8bar)
Weight:6.4 Net Lbs.(2.9kg),Shipping 7.8 Lbs(3.5kg)
✧ Float switch for automatic shut-off when bottle is empty.
✧ Built-in check value to prevent back flow.
✧ Universal seal cap fits most water containers.
✧ Compact size for easy mounting.
✧ 20’ discharge hose included.
✧ Easy installed.

Max Out Tubi Amp Dimensions(H x W x


Model GPM PSI Let ng Volts s Cycle Cord D) Weight(kgs)
BW1000A 1.0 40 1/4” 20’ 115V AC 0.5 50/60 6’ 3.0" x 5.5" x 7.5" 3.5
BW2000A 1.0 40 1/4” 20’ 220V AC 0.25 50/60 6’ 3.0" x 5.5" x 7.5" 3.5
BW3000A 1.0 40 1/4” 20’ 12V DC 5.0 50/60 6’ 3.0" x 5.5" x 7.5" 3.5
115V-
BW4003A 1.0 40 1/4” 20’ 240AC 0.5 50/60 6’ 3.0" x 5.5" x 7.5" 2.8
115V
BW2020A 1.0 40 1/4” 20’ /220V AC 0.55 50/60 6’ 3.0" x 5.5" x 7.5" 4.0

Application

Features and Benefits:


●Long Life Motor: Ensures years of reliable operation
●Sailflo Diaphragm Pump: Provides dependable run dry capabilities, extending the life of the pump
●Quiet Operation: Equipped with noise dampening rubber feet to minimize noise pollution
●Bulit-in Check Valve

Including:
•Suction wand and hose assembly.
•Pump module with On/Off switch.
•6 foot cord with plug.
•20 feet of 1/4" discharge tube
•Universal seal cap: Fits any 3, 5,
and 6 gallon plastic water bottle.
•Installation and maintenance instructions.

www.starflopump.com
Gear Oil Pump Technical Data

Application:
Diesel, Lubricant, Viscous Liquids
Be able to use for water and machinery fuel except gasoline.

BENEFITS
● Reversible self-priming
● Compact size with exceptional flow rate(3.7GPM/14.0LPM)
● Powerful reversible pumps specially designed to be used with oils

Technical Specification
Ports: 3/8” Male JIC
Amps: 3.8A@12v - 2.0A@24v
Flow Rate: 3.7 GPM / 14.0 LPM
Self priming: 5 feet (wet gears)
Lift: 15 feet
Pump body: Brass
Gears: Bronze
Shaft: Stainless Steel
Seal: Fluoroelastomer lip seal
Motor: DC 12v or 24v

Model Volt Flow rate Max Lift Amps(A)Max Draw(A)Packing size(mm) N.W/G.W(kgs)
SFGP-12 12Vdc 14LPM 3M 7A 10A 215*135*110 2.48/2.68
SFGP-24 24Vdc 14PLM 3M 4A 6A 215*135*110 2.45/2.68

www.starflopump.com
Impeller Pumps Technical Data
Engine cooling pump/ bilge pump/ Deck washdown pump

Mainly Application:
Used in marine to drain water on deck and wash deck
Fratures:
Good flow rate, continuously rated pump
8.5 gpm (32 lpm) at 10ft (3m) total head
Self -priming up to 4ft (1.2m) allows
Mounting above wet bilges
Shower debris presents no problem to this bronze bodied, flexible impeller design
Simple design means fewer wearing parts-all user serviceable

Complies with USCG 183.410 and ISO 8846


MARINE (ignition Protection)
ISO 8849 MARINE (Bilge Pump Standard)
Remind
Should be installed in a dry and ventilated position
Must not run dry, it is better to work with a bilge control panel to avoid running dry
Specifications:

Model Volt Flow rate Max Lift Amps(A)Max Draw(A)Packing size(mm) N.W/G.W(kgs)
SF-32-12 12Vdc 30LPM 3M 8.0A 10.0A 215*135*110 2.38/2.58
SF-32-24 24Vdc 30PLM 3M 5.0A 7.0A 215*135*110 2.35/2.58

www.starflopump.com
350GPH-550GPH BILGE PUMP TECHNICAL DATA

Features & Benefits Typical Applications MOTOR

Pump and switch are stand alone Marine Type


products RV & Campers Compact, efficient, long life motor
Compact, efficient, long life motors Industrial
New mercury free float switches

Volt: 12 and 24 volt versions PUMP Leads


Easy clean snap-lock strainer bases Liquid Temperature

Anti-Airlock protection 110°F (43°C) Max. 18 AWG, 1 m long Leads


Exclusive moisture tight seals Priming Capabilities Temperature Limits
Completely submersible Not needed flooded suction 110°F (43°C) Max.
Marine grade blocked wiring Power Duty Cycle
Silent and vibrationless operation 3.0 amps max current draw Intermittent

Max.Pressure Voltage
Not needed 12v/24v

Flow
Model Volts Current Head Wire lead Outlet Dia N.W/G.W
rate
SFBP350-12 350 12V 1.0A 3m 1m 19 mm/3/4" 0.33/0.40 kg
SFBP500-12 GPH
500 12V 1.6A 3m 1m 19 mm/3/4" 0.33/0.40 kg
SFBP500-24 GPH
500 24V 1.2A 3m 1m 19 mm/3/4" 0.33/0.40 kg
SFBP750-12 GPH
750 12V 2.5A 3m 1m 19 mm/3/4" 0.33/0.40 kg
SFBP750-24 GPH
750 24V 1.2A 3m 1m 19 mm/3/4" 0.33/0.40 kg
GPH

www.starflopump.com
1100 GPH BILGE PUMP TECHNICAL DATA

Features & Benefits Typical Applications MOTOR

Pump and switch are stand alone products Marine Type


Compact, efficient, long life motors RV & Campers Compact, efficient, long life
New mercury free float switches Industrial motor

Volt: 12 and 24 volt versions PUMP Leads


Easy clean snap-lock strainer bases Liquid Temperature
Anti-Airlock protection 110°F (43°C) Max. 18 AWG, 1 m long Leads
Exclusive moisture tight seals Priming Capabilities Temperature Limits

Completely submersible Not needed flooded suction 110°F (43°C) Max.


Marine grade blocked wiring Power Duty Cycle
Silent and vibrationless operation 3.0 amps max current draw Intermittent
Max.Pressure Voltage
Not needed 12v/24v

Model Flow rate Volts Current Head Wire lead Outlet Dia N.W/G.W
29 mm/1-
SFBP1100-12 1100 GPH 12V 3.0A 4m 1m 0.38/0.44 kg
1/8"
29 mm/1-
SFBP1100-24 1100 GPH 24V 1.8A 4m 1m 0.38/0.44 kg
1/8"

www.starflopump.com
1500GPH & 2000GPH BILGE PUMP TECHNICAL DATA

Features & Benefits Typical Applications MOTOR


Pump and switch are stand alone products Marine Type
Compact, efficient, long life motors RV & Campers Compact, efficient, long life
New mercury free float switches Industrial motor
Volt:12 and 24 volt versions PUMP Leads
Easy clean snap-lock strainer bases Liquid Temperature

Anti-Airlock protection 110°F (43°C) Max. 18 AWG, 1 m long Leads


Exclusive moisture tight seals Priming Capabilities Temperature Limits
Completely submersible Not needed 110°F (43°C) Max.
flooded suction
Marine grade blocked wiring Power Duty Cycle
Silent and vibrationless operation 16.0 amps max current draw Intermittent

Max.Pressure Voltage
Not needed 12v/24v

Curren
Model Flow rate Volts Head Wire lead Outlet Dia N.W/G.W
t
SFBP1500-12 1500 GPH 12V 8.0A 5m 1m 29 mm/1- 1.13/1.21 kg
SFBP1500-24 1500 GPH 24V 4.0A 5m 1m 29 1/8"
mm/1- 1.13/1.21 kg
SFBP2000-12 2000 GPH 12V 8.5A 6m 1m 29 1/8"
mm/1- 1.13/1.21 kg
SFBP2000-24 2000 GPH 24V 5.0A 6m 1m 29 1/8"
mm/1- 1.13/1.21 kg
1/8"

www.starflopump.com
1500GPH & 2000GPH BILGE PUMP TECHNICAL DATA

Features & Benefits Typical Applications MOTOR


Pump and switch are stand alone products Marine Type
Compact, efficient, long life motors RV & Campers Compact, efficient, long life
New mercury free float switches Industrial motor
Volt: 12 and 24 volt versions PUMP Leads
Easy clean snap-lock strainer bases Liquid Temperature

Anti-Airlock protection 110°F (43°C) Max. 18 AWG, 1 m long Leads


Exclusive moisture tight seals Priming Capabilities Temperature Limits
Completely submersible Not needed 110°F (43°C) Max.
flooded suction
Marine grade blocked wiring Power Duty Cycle
Silent and vibrationless operation 25.0 amps max current draw Intermittent
Max.Pressure Voltage
Not needed 12v/24v

Curren
Model Flow rate Volts Head Wire lead Outlet Dia N.W/G.W
t
SFBP3000-12 3000 GPH 12V 14.0A 8m 1m 40 mm/1- 2.10/2.37 kg
SFBP3000-24 3000 GPH 24V 7.0A 8m 1m 40 1/2"
mm/1- 2.10/2.37 kg
SFBP3500-12 3500 GPH 12V 16.0A 8m 1m 40 1/2"
mm/1- 2.10/2.37 kg
SFBP3500-24 3500 GPH 24V 8.0A 8m 1m 40 1/2"
mm/1- 2.10/2.37 kg
SFBP3700-12 3700 GPH 12V 16.0A 8m 1m 40 1/2"
mm/1- 2.10/2.37 kg
SFBP3700-24 3700 GPH 24V 10.0A 8m 1m 40 1/2"
mm/1- 2.10/2.37 kg
1/2"

www.starflopump.com
FLOAT SWITCH TECHNICAL DATA

Features & Benefits Typical Applications


Turn pump on when water level reaches 2" (51mm)-SFBS-20- Marine
01
Turn pump off when water level reaches 3/4" (19mm)-SFBS- RV & Campers
20-01
Ideal flow sensor for bilge pumps Industrial
Heavy duty flow switch is designed for the toughest New mercury free float switch.
applications Suitable for use with 12v DC or 24v DC
bilge pumps.

Model SFBS-20-01
Max Amps 12volts 20A
Max Amps 24volts 10A
Wire Length 1M
Wire Gauge Size 18
N.W./G.W. (kg) 0.16/0.18

22 www.starflopump.com
AUTOMATIC BILGE PUMP 600GPH & 750GPH TECHNICAL DATA

Features & Benefits PUMP MOTOR


All-in-one pump & switch-No float switch Liquid Temperature Type
required Pump turns on when water level rises
& shuts off when water is removed
Will not pump oil - straight motor oil that 110°F (43°C) Max. Compact, efficient, long life
enters the bilge will not turn the pump on motor

Snap-off strainer for easy cleaning Priming Capabilities Leads


Anti-fouling impeller Not needed flooded suction 18 AWG, 1 m long Leads
Available in 600 & 750 GPH (2271 & 2838 Power Temperature Limits
LPH) models in 12 and 24 volt versions
Typical Applications 3.0 amps max current draw 110°F (43°C) Max.
Marine Max Pressure Duty Cycle
RV & Campers Not needed Intermittent
Industrial Outlet Ports
3/4" (19 mm) Hose Barb
Weight
1.03 lbs (0.47 kg)
Voltag
e
12v/24v

Curren
Model Flow rate Volts Head Wire lead Outlet Dia N.W/G.W
t
SF-G600-12 600 GPH 12V 2.5A 2.5 m 1m 19 mm/3/4" 0.47/0.52 kg
SF-G600-24 600 GPH 24V 1.5A 2.5 m 1m 19 mm/3/4" 0.47/0.52 kg
SF-G750-12 750 GPH 12V 3.0A 3.0 m 1m 19 mm/3/4" 0.47/0.52 kg
SF-G750-24 750 GPH 24V 1.6A 3.0 m 1m 19 mm/3/4" 0.47/0.52 kg
SF-G1100-12 1100 GPH 12V 3.8A 5.0 m 1m 29mm/1-1/8'' 0.47/0.52 kg
SF-G1100-24 1100 GPH 24V 2.0A 5.0 m 1m 29mm/1-1/8'' 0.47/0.52 kg

23 www.starflopump.com

You might also like