BS-270, |. TOUGH FLOOR GRINDER
electric ional .
( for jofess ...and adhesive remover!
Removing coatings, glue, adhesives
Cleaning dirty surfaces, build-ups
concrete, asphalt or even
wood panels
Abrading latex, mastics, sealers, adhesives
Smoothing rough concrete surfaces,
rain marks
Levelling high spots on concrete
Working wth 270 mm 10°
Weight S7K9 {10 bs » Unique floating system
Power: 230.V, 2.2 KW, 50 Hz, 1 phase itficult j
400 V, 2.2 KW, 50 Hz, 3 phases for difficult jobs
Speed 1500 RPM » Compact and light-
Option: eT weight
a » Easy transport
» Heavy gauge steel!
construction
» Vacuum cleaner port for
dustfree operation
» elevating handle
» Detachable dust shroud
for easy grinding wall
edges or vertical surfaces
For each application the perfect tool!
AIRTEC-EASY-CLICK-Design
For instant change of segments on job site!
AIRTEC AG 1 Inustrestasse 01 CH-455 Zuagen I Steand
Tel 416197695 25 I Favs} 619769526 Linfotairtecch 1warwarcecch CRED]
AIRTECE 04-12
BRD AIRTEC SERVICE 1 0-79713 Bad Sackingen
el. +49(0) 7761 553 4888 | Fax +49(0) 7761 553 5786BS-2 nals a high productivity removal system
fore
AB, AB, Ao
Toolholder with Diamond- Toolholder with Diamond- Toolholder with tungsten
Grinding Segments Grinding and PCD segments abrasive coated segments
(Grit 6- Grit 220 available) For dificaltremovals
For dry grinding in diferent (Masti adhesives, etc) Forwood, panels, thin paint,
hardness varnish
Toolholder for segments, Emergency ON-OFF switch with Dust shroud opens for grinding to
vibration dampening ring lanyard the exact edge of the wall
pe-200
Electric version 230 V, for inhouse application, smaller jobs len solver
Electric version 400 V, powerful for large areas the po 1 als
1on
‘or grinding, milling and polishing segment and tools see separate leaflet for?
AIRTEC® 04-12