To change a computer's IP address to connect via Ethernet cable to a DE-4000 device, open the control panel and network settings, select the Ethernet adapter properties, double click TCP/IPv4 settings and enter the DE-4000's default IP of 98.102.65.174.
To change a computer's IP address to connect via Ethernet cable to a DE-4000 device, open the control panel and network settings, select the Ethernet adapter properties, double click TCP/IPv4 settings and enter the DE-4000's default IP of 98.102.65.174.
To change a computer's IP address to connect via Ethernet cable to a DE-4000 device, open the control panel and network settings, select the Ethernet adapter properties, double click TCP/IPv4 settings and enter the DE-4000's default IP of 98.102.65.174.
1. Open the computers “control panel” 6. Use the following settings
2. Open “network and sharing center”
3. Click on “change adapter settings
4. Right click on “Ethernet”, select “properties”
7. After updating the settings, click “OK”
5. Double click “internet protocol version 4 (TCP/IPv4) This will change the IP address so that you can connect to a DE-4000 via Ethernet cable. The default IP address for the DE-4000 is 98.102.65.174