Professional Documents
Culture Documents
1 (revision 1)
Installation Requirements
Plumbing
• ¼” flexible water supply line
• Minimum pressure 40 psi (max 100 psi)
• Minimum flow rate of 2.5 liters per minute (0.66 gpm)
Electrical
• 115 VAC, 60 Hz, 12A max current
• Grounded, 3-prong outlet
Internet Connection
• A 2.4GHz wireless or Ethernet connection
Physical Unit
• Unit weighs approximately 250 lbs empty and 350 lbs fully stocked
See additional pages for details of unit dimensions and space requirements
1
Basic Components
Exterior Rev. 1 (revision 1)
Screen
Nozzle
Drip Tray
Casters
2
Basic Components
Interior Rev. 1 (revision 1)
Restock Flavors
Instructions
Water Filter
• 5, 10 & 20 Lb
3
Overall Dimensions
Rev. 1 (revision 1)
66.25”
16.5” 22”
4
Door Dimensions
Rev. 1 (revision 1)
49.5”
Floor to
Nozzle
12”
Dispense
Height
31.75” 37.75”
Floor to Center
of Accessible Dispense
Controls Area
1” 4.3”
Caster Clearance 5
Minimum Clearance
Rev. 1 (revision 1)
3”
1” 1” 2” min.
6
Minimum Clearance
Rev. 1 (revision 1)
ADA Compliance
In order for the a Bevi Standup 2.0 to be considered ADA compliant in regards to physical
requirements, it must be installed such that:
The floor space in front of the machine must be clear by at least 30” by 48” to allow for a
forward or parallel approach. See Figure below:
Top of
Machine
48”
30”
7
Screen Dimensions
Rev. 1 (revision 1)
15.6”
15.6” Display
8
Door Open Dimensions
Rev. 1 (revision 1)
TOP VIEW
36.25”
Door Open
Depth
17.2”
Door Open
Width
9
Back of Unit Features & Dimensions
Rev. 1 (revision 1)
5” 5.25”
Serial Number
Power Switch
Ethernet
Power Switch
Floor to
Power Switch Power Cable
*9.85 FT
2.125”
Water Inlet
27.375”
Floor to
Water Inlet
6.5”
Chiller Exhaust
4.5”
10