Professional Documents
Culture Documents
Milwaukee-Tools 4094 51414094 Cut
Milwaukee-Tools 4094 51414094 Cut
4094 4096
4099 4005
SPECIFICATIONS ACCESSORIES
juggested diameters listed on specific models are for maximum coring efficiency in medium aggregate. HARDENED SHEAR PIN
Speeds must be adjusted for material conditions. 44-60-0032
Standard Equipment
15 AMP MODELS
Cost effective, heavy-duty power. Lower current draw of 15 amp motor provides STEEL SHEAR PIN
core drilling power where 20 amp service is unavailable. 44-60-0065
SUGG. DIA.
CATALOG MOTOR IN MEDIUM NET WGT. SHIP. WGT.
NUMBER VOLTS AC AMPS SPINDLE PROTECTION RPM AGGREGATE LBS. LBS. TYPE "J" GREASE FOR ALL
4090 120 15* 1-1/4"-7 SHEAR PIN 375 5"- 8" 26 30 TWO SPEED MODELS
49-08-4220
750
1 Ib. can
4092-20 120 15* 1-1/4"-7 CLUTCH 375 5"- 8" 26 30
750
1-3/8" OPEN END WRENCH
4095 120 15* 1-1/4"-7 SHEAR PIN 500 3"- 5" 26 30
49-96-4700
1000
4097-20 120 15* 1-1/4"-7 CLUTCH 500 3"- 5" 26 30
3/16" SOCKET WRENCH
1000 1-1/4"-3"
49-96-0085
For mounting DYMODRILLS to cradle of
20 AMP MODELS VAC-U-RIG.
Improved, high performance motor design provides a maximum 4.8 horsepower. Increased power maintains
higher coring speed and produces higher torque for maximum core drilling production. SPACER WITH KEY______________
SUGG. DIA. 49-67-0050
CATALOG MOTOR IN MEDIUM NETWGT. SHIP. WGT. For rigs Nos. 4 1 1 4 , 4 1 1 9 and 4104 only.
NUMBER VOLTS AC AMPS SPINDLE PROTECTION RPM AGGREGATE LBS. LBS. Allows use of bits through 10" diameter.
4079 120 20* 1-1/4"-7 SHEAR PIN 300 24 31 Spacer 1" thick, fits between cradle of Rig and
600 4" -7" Drill. Four mounting screws are included.
4004 120 20* 1-1/4"-7 CLUTCH 300 24 31
600 4"-7" MOUNTING ASSEMBLY
4094 120 20* 1-1/4"-7 SHEAR PIN 450 24 31 49-67-0140
900 2"-6"
4096 120 20* 1-1/4"-7 CLUTCH 450 24 31
900 2"-6"
4099 120 20* 1-1/4"-7 SHEAR PIN 600 4"-7" 24 31
1200 3/4" -4"
4005 120 20* 1-1/4"-7 CLUTCH 600 4"-7" 24 31
1200 3/4" -4"
STANDARD EQUIPMENT: All Models: Includes built-in water swivel, adapter to receive standard water hose, water control valve and an open end
wench for holding output spindle while removing bits. Shear Pin Models: Same as above, plus six extra No. 44-60-0032 Hardened Shear pins.
"Cord equipped with 20 amp Twist Lock plug; NEMA plug type L5-20P. \i V
55