This document provides a template for conducting a visual road condition assessment of an asphalt pavement. It includes a table to record the type of surface distress observed, the area and length affected, and the severity of each distress. The document instructs the assessor to draw the road segment, fill out the table with observation data, and use a provided formula to calculate an overall visual condition index and determine the road condition.
This document provides a template for conducting a visual road condition assessment of an asphalt pavement. It includes a table to record the type of surface distress observed, the area and length affected, and the severity of each distress. The document instructs the assessor to draw the road segment, fill out the table with observation data, and use a provided formula to calculate an overall visual condition index and determine the road condition.
This document provides a template for conducting a visual road condition assessment of an asphalt pavement. It includes a table to record the type of surface distress observed, the area and length affected, and the severity of each distress. The document instructs the assessor to draw the road segment, fill out the table with observation data, and use a provided formula to calculate an overall visual condition index and determine the road condition.
CARRIAGEWAY WIDTH = 6.70m LANE WIDTH = 3.35m Visual RoCond Assessment Form - Asphalt Pavement AREA OF SURFACE DISTRESS LENGTH OF METHOD OF MEASUREMENT DEFECT (if SEVERITY OF DEFECT TYPE TYPE DEFECT applicable) Measured over the 50m gauging Rutting length (representative) Patches Measured over the whole segment Edge Break Measured over the whole segment FLEXIBLE Surface Failure Measured over the whole segment PAVEMENT Pothole/Base Failure Measured over the whole segment (ASPHALT) Wearing Surface Measured over the whole segment Defects Pavement Crackings 1. Longitudinal Measured over the whole segment 2. Transverse 3. Crocodile Cracks Plate # 3: Visual RoCond Assessment - Asphalt Pavement
• Draw the given figure and apply a road condition assessment.
• Given the provided table, fill out the Area of Defect, Length (in one- lane width), and determine the severity of defect. • Using the Asphalt Visual Condition Index (VCI) Formula and distress weight factors, determine the Road Condition of the assessed pavement. Show your solution