Professional Documents
Culture Documents
Iadc Bits PDF
Iadc Bits PDF
BEARINGS1 OTHER
GAGE DULL
REASON
INNER SEALS CHAR. PULLED
0 -0 0 0 0 @
@ INNER C U ~ I N GSTRUCTURE (AII inner MS.) @ LOCATION FIXED CUTTER
@ OUTER CUTTING STRUCTURE (Gage row only.)
N -
ROLLER CONE
Nose Row
C - Cone
In columns 1and 2 a linear scale from 0 to 8 Is used to CONE # N - Nose
describe the condklon of the cuttlng structure according M - Middle Row 1 T - Taper
to the followlng: G - Gage Row 2 S - Shoulder
STEEL TOOTH BlTS
A - All Rows 3 G - Gage
A measure of lost tooth height due to abrasion andlor damage. A - All Areas
0
8
-- TOTAL
NO LOSS OF TOOTH HEIGHT.
LOSS OF TOOTH HEIGHT.
@ BEARINGS ISEALS
NON-SEALED BEARINGS SEALED BEARINGS
INSERT BlTS A linear scale estimating bearing life E - seals effective
A measure of total cutting structure reduction due to lost, worn used. (0 - No life used, 8 - All life F - seals failed
andlor broken inserts. used, ie. no bearing life remaining.) N - not able to grade
0
8 -- ALL
NO LOST, WORN AND/OR BROKEN INSERTS.
INSERTS LOST, WORN ANWOR BROKEN.
@ Measure in fractions of an inch.
X - fixed cutter bi
(bearingless)
FIXED CUlTER BlTS I - in gage
A measure of lost, worn and/or broken cutting structure. I l l 6 - Ills.out of gage
-
-- ALL
118 l/Woutofgage
0 NO LOST, WORN ANWOR BROKEN CUTnNG STRUCTURE.
8 OF CUTTING STRUCTURE LOST, WORN AND/OR BROKEN.
114 - 114'outofgage
DULL CHARACTERISTICS
(Use only cutting structure related codes.)
a OTHER DULL CHARACTERISTIC
BC -- Broken Cone --
LN Lost N o n k
Refer to column 3 codes.
BF
BT -- Bond Failure
Broken TaothICuttcn.
LT
--
Lost Taeth'Cuiters
OC OffConterWear @ REASON PULLED OR RUN TERMINATED
BU
CC
CD -
- Balled Up Bit
Cracked Cone
Cone Dragged
PB
---
Plnch.d Bit
PN Pluggad Notzle/Flow P s u o p
RG R0und.d Gaw
BHA
DMF
DTF
--- Change Bottom Hok Assembly
Downhok Motor Failure
HR
LOG --- Pump
Houn On Bit
Run Logs
CI
CR
-
-
Cone interference
Cored
RO Ring Out
--
SD Shimail Damage
DSF
DST
-- Downhole Tool Failure
Drill String Failure
Drill Stem Test
PP
PR
RIG
-- Rig Pressure
Penetration Rate
Repair
CT
ER -- - Chippd TWWCutWs
Erosion
SS
TR --Sdf S h m i g Wear
Tradclng
DP
CU
-- Condition
MIPlug
Mud
TD
TW
-- Total DepthlCasing Depth
TwlstOff
FC
HC -
JD -
Flat Crested Wear
Heat Checking
Junk Damage
WO W a M Out Bit
--
WT Worn TeetWCuttars
NO No Dull Charactt~istic
CP
FM
HP
- Core Point
-- Formation
Hde Problems
Change
TO
WC -- Torque
Weather Conditions
FOR ADDITIONAL INFORMATION CONTACT Y W R LOCI1
' LC - Lostcone *Show cone # or #s w l e r location @. UH - Left in Hole SECUAlTY DBS REPRESENTATIVEOR SECURTT Des
DIVlSlONIN DALLAS, TEXAS (214) 333-3211
Security DBS
I n s e r t Bits
SVH
FDGH, MFDGH
1
Mediumto mediumhard
MSVH
formations with high
compressivestrength
Hard semi-abrasive or
abrasive formations
The co& to the right are used in the fourth position of the IM I Mntnr annlirntinn I -
fourth-character IADC bit classijication system.
HALLIBURTON