Professional Documents
Culture Documents
Quick Installation and Startup for Optivity NMS 10.3 for Windows*
Optivity NMS is a client/server network management system for Nortel Networks enterprise data networks. You
install the server software on one machine, and install the client software on one or more other machines.
This card provides brief instructions for installing and getting started with Optivity NMS 10.3 for the following
Windows platforms:
• Windows NT* SP6
• Windows 2000
• Windows 2003
It is assumed that you are familiar with installing applications on a Windows system. See Installing and
Administering Optivity NMS 10.3 for more detailed information. Nortel Networks recommends that you
thoroughly read Release Notes for Optivity NMS 10.3 before proceeding to the installation.
System requirements
For best performance, make sure that your Windows system meets the following criteria:
• Pentium 4, 2.6 Ghz processor
• 2 Gb RAM
• 20 Gb hard drive
If you are upgrading from Optivity NMS 10.2 to Optivity NMS 10.3
If you are upgrading from Optivity NMS 10.2 to Optivity NMS 10.3, you can use the brief instructions in this
guide if you do not want to save your customizations or topology database. If you do want to save your
database or customizations, see Installing and Administering Optivity NMS 10.3 for detailed upgrade
procedures.
(Server only) Run the Optivity NMS 10.3 database installer for Windows*
If you are installing a new Optivity NMS 10.3 server, you must install the Oracle 9i database software as
described below before installing the Optivity NMS 10.3 software.
If you are installing just the Optivity NMS 10.3 client software, or if you are upgrading an Optivity NMS server
from version 10.2 to version 10.3 and have already installed the Oracle 9i database software, skip ahead to the
section “Run the Optivity NMS 10.3 installation program” on page 2.
1 Log in to Windows with Administrator privileges, and verify that all programs are closed.
2 Insert the Optivity NMS 10.3 Database Installer for Windows* (1 of 3) CD into your system’s CD-ROM
drive.
1
217232A.fm Page 2 Tuesday, November 2, 2004 11:13 AM
(Server only) Ensure that all Optivity NMS services are running
For an Optivity NMS Server/Client installation, open a Windows command prompt and use the optstatus -fe
command to make sure that all of the required services are running:
optstatus -fe
Refer to Installing and Administering Optivity NMS 10.3, Chapter 6 and Appendix C for further instructions
about services.
2
217232A.fm Page 3 Tuesday, November 2, 2004 11:13 AM
After editing the text file, stop and restart the Optivity NMS services using the following commands:
optivity_apps stop
optivity_apps start
Refer to Installing and Administering Optivity NMS 10.3, Chapter 2, for full instructions.
Start InfoCenter
InfoCenter is the command center for Optivity NMS. To start InfoCenter:
1 From the Windows Start menu, choose Programs > Optivity > InfoCenter. The Connect to Optivity Server
dialog box opens.
2 Type a valid user name, password, and the server hostname or IP address to which you want to connect.
The Optivity NMS InfoCenter window opens.
3
217232A.fm Page 4 Tuesday, November 2, 2004 11:13 AM
*217232-A*
Copyright © November 2004 Nortel Networks. All rights reserved. Printed in the USA.
The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document
are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any
products specified in this document. The information in this document is proprietary to Nortel Networks, Inc.