Professional Documents
Culture Documents
► Built to last
From mountaintops to off-shore platforms, on weather stations in
the bitter cold of Antarctica and on telephone signal repeaters in
the hot Australian outback, the technology has been proven in
the harshest environments.
Electrical characteristics
STC 1000W/m2
(1) (2)
NOCT 800W/m2
Maximum power (Pmax) 65W 46.8W 796 [31.3]
Including screw heads
Voltage at Pmax (Vmpp) 17.6V 15.7V 790 [31.1]
Without screw heads
Current at Pmax (Impp) 3.69A 2.95A front view
Short circuit current (Isc) 3.99A 3.23A
1234567
Open circuit voltage (Voc) 21.7V 19.7V
674 [26.5]
Module efficiency 12.1%
Tolerance (Pmax) ±10%
Nominal voltage 12V
Efficiency reduction at 200W/m2 <5% reduction (efficiency 11.5%)
Limiting reverse current 3.99A
Temperature coefficient of Isc 0.105%/°C
Temperature coefficient of Voc -0.360%/°C side view
50 [2.0]
Temperature coefficient of (Pmax) -0.45%/°C 20 [0.8]
(3)
NOCT 47±2°C Including screw heads
305 [12.0] 225 [8.9]
Maximum series fuse rating 10A back view
Application class (according to IEC 61730:2007) Class A
Junction Box dimensions:
Maximum system voltage 600V (US) / 1000V (IEC) 163.50 x 112.50 x 37.50
2
1: Values at Standard Test Conditions (STC): 1000W/m irradiance, AM1.5 solar spectrum and 25ºC module [6.4 x 4.4 x 1.5]
639 [25.2]
temperature
2: Values at 800W/m2 irradiance, Nominal Operation Cell Temperature (NOCT) and AM1.5 solar spectrum
3: Nominal Operation Cell Temperature: Module operation temperature at 800W/m2 irradiance, 20ºC air
temperature, 1m/s wind speed
Ground hole
2 places
Mechanical characteristics
Solar cells 36 crystalline silicon cells in series
152.5 [6.0] 245 [9.7]
Front cover High transmission 3.2mm (1/8th in) glass Dimensions in mm [in].
Encapsulant EVA
Back cover White polyester
Frame Silver anodized aluminum
Temperature - dependence of performance
Junction box IP65 with 4 terminal screw connection block; accepts
Current (A)
4.0
PG 13.5, M20 13mm (½“)conduit, or cable fittings
accepting 6-12mm diameter cable. Terminals accept
3.0
2.5-10mm2 (8-14 AWG) wire
Dimensions 796 x 674 x 50mm / 31.3 x 26.5 x 1.97in
2.0
Weight 6.4kg /14lbs
All dimensional tolerances within ±1% unless otherwise stated. t = 0ºC
1.0 t = 25ºC
t = 50ºC
t = 75ºC
Warranty* 0
► Free from defects in materials and workmanship for 2 years 0
0 10 20 30
Voltage (V)
► 90% min. power output over 12 years
► Optional 25 years available
* Refer to limited warranty certificate for terms and conditions. Irradiance - dependence of performance
Current (A)
4.0
Certification
Certified according to the extended version of the IEC 61215 (ed.2), 3.0 1000W/m2
Certified according to IEC 61730-1 and IEC 61730-2 (ed.1), 1.0 400W/m2