Professional Documents
Culture Documents
Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with
manual override on all arrays
All Internal RET actuators are connected in “Cascaded SRET” configuration
OBSOLETE
This product was discontinued on: March 31, 2022
Replaced By:
RV3-65D-R4-V3 8-port sector antenna, 2x 694–960 and 6x 1695–2690 MHz, 65° HPBW, 4x IntRET. Antenna rear wind
loading 506N @ 150km/h
General Specifications
Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 8, 2022
CV3PX310R1
Power Consumption, normal conditions, maximum 13 W
Dimensions
Width 354 mm | 13.937 in
Array Layout
Port Configuration
Page 2 of 5
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 8, 2022
CV3PX310R1
Electrical Specifications
Impedance 50 ohm
Polarization ±45°
Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 16.6 17 16.4 17.1 17.7
Beamwidth, Horizontal, 65 64 61 60 63
degrees
Beamwidth, Vertical, degrees 8.9 8.1 8.3 7.4 5.9
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 19 16 16 15
Front-to-Back Ratio at 180°, 25 28 29 30 30
dB
CPR at Boresight, dB 17 14 17 15 13
CPR at Sector, dB 9 9 7 7 7
Isolation, Cross Polarization, 25 25 25 25 25
dB
Isolation, Inter-band, dB 30 30 30 30 30
1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 Page 3 of 5
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 8, 2022
CV3PX310R1
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
Mechanical Specifications
Wind Loading @ Velocity, frontal 1,237.0 N @ 150 km/h (278.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 478.0 N @ 150 km/h (107.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,271.0 N @ 150 km/h (285.7 lbf @ 150 km/h)
Regulatory Compliance/Certifications
Agency Classification
Page 4 of 5
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 8, 2022
CV3PX310R1
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
Included Products
T-029-GL-E – Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel
antennas. Includes 2 clamp sets.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
Page 5 of 5
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 8, 2022