Professional Documents
Culture Documents
707 105 gb
System luminaires 2015/2016
Sicherheitstechnik GmbH
Sicherheitstechnik GmbH Sicherheitstechnik GmbH Sicherheitstechnik GmbH
Technical data
Sicherheitstechnik GmbH
J/SV
For connection to INOTEC central- or low- power battery systems
acc. to VDE0108 and EN50171
EMC protection acc. to EN55015
230VAC ±10% / 220VDC ± 20%
Incl. addressable LED- supply unit for INOTEC individual lamp
monitoring and JOKER- technology LEDs dimmable in mains
operation
or
Incl. addressable high frequency ballast for INOTEC individual
lamp monitoring and Joker-technology
SKÜ
For connection to central- or low- power battery systems with
circuit monitoring acc. to VDE0108 and EN50171
EMC protection acc. to EN55015
230VAC ±10% / 220VDC ± 20%
Incl. LED supply unit
or
Incl. INOTEC high frequency ballast
NE/SV
For connection to generator NEA- systems acc. to VDE0108 and
EN50171
EMC protection acc. to EN55015
230VAC ±10%
Incl. addressable LED- supply unit for INOTEC individual lamp
monitoring, LEDs dimmable in mains operation.
or
Incl. addressable high frequency ballast for INOTEC individual
General information lamp monitoring
With the release of this catalogue all prior issued system-luminaire
catalogues lose their validity. All products included in this release may
vary, depending on technical or formal modifications we incorporate 24V
to improve the product performance or adapt the product to reflect For the connection to INOTEC 24V -systems, -24V BUS-substa-
changes on legal requirements. Updated data are available on request. tions and -24V circuits to VDE0108 and EN50171
We deliver all LED luminaires with LEDs. Fluorescent lamps 4W, 6W EMC protection acc. to EN55015
and 8W lamps are included in our respective luminaires too. Lamps for 24VDC ±20%
luminaires with other wattages are not included.
Incl. addressed (factory-set) LED- supply unit for INOTEC indivi-
dual lamp monitoring
Industrial and intellectual property righs are valid for most of our
products.
Up to date product information is available on Copyright: INOTEC Sicherheitstechnik GmbH, Ense Publica-
www.inotec-licht.de tions and copies, even partial, only with manufacturers
permission.
J/SV
For connection to INOTEC central- or low- power battery systems
acc. to VDE0108 and EN50171
EMC protection acc. to EN55015
230VAC ±10% / 220VDC ± 20%
Incl. addressable LED- supply unit for INOTEC individual lamp
monitoring and JOKER- technology LEDs dimmable in mains
operation
or
Incl. addressable high frequency ballast for INOTEC individual
lamp monitoring and Joker-technology
SKÜ
For connection to central- or low- power battery systems with
circuit monitoring acc. to VDE0108 and EN50171
EMC protection acc. to EN55015
230VAC ±10% / 220VDC ± 20%
Incl. LED supply unit
or
Incl. INOTEC high frequency ballast
NE/SV
For connection to generator NEA- systems acc. to VDE0108 and
EN50171
EMC protection acc. to EN55015
230VAC ±10%
Incl. addressable LED- supply unit for INOTEC individual lamp
monitoring, LEDs dimmable in mains operation.
or
Incl. addressable high frequency ballast for INOTEC individual
General information lamp monitoring
With the release of this catalogue all prior issued system-luminaire
catalogues lose their validity. All products included in this release may
vary, depending on technical or formal modifications we incorporate 24V
to improve the product performance or adapt the product to reflect For the connection to INOTEC 24V -systems, -24V BUS-substa-
changes on legal requirements. Updated data are available on request. tions and -24V circuits to VDE0108 and EN50171
We deliver all LED luminaires with LEDs. Fluorescent lamps 4W, 6W EMC protection acc. to EN55015
and 8W lamps are included in our respective luminaires too. Lamps for 24VDC ±20%
luminaires with other wattages are not included.
Incl. addressed (factory-set) LED- supply unit for INOTEC indivi-
dual lamp monitoring
Industrial and intellectual property righs are valid for most of our
products.
Up to date product information is available on Copyright: INOTEC Sicherheitstechnik GmbH, Ense Publica-
www.inotec-licht.de tions and copies, even partial, only with manufacturers
permission.
w w w. i n o t e c - l i c h t . d e 3
Contents
FS 804.1 SN 804.1
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Straight-Line
FL 1530 SNP 1530 SNP 1520 Meeting the highest demands
Edge lights
SNP 1016.2 SNP 1118 SNP 1116 SNP 1216 SNP 1214 Highlighting modern internal architecture
Aluminium luminaires
SNP 7183/7283 FL 7188/7288 SNP 7188/7288 SNP 7186/7286 SNP 7184/7284 The all-rounder
Downlights
SN 9107-11 SN 9127-11 SN 9124.1 SN 9104.1 SN 9100 Powerful and variable
Segmental luminaires
FL 5105 FL 5103 FL 5101 Versatile D.E.R. luminaires
EX luminaires
Explosion-proof emergency exit and
EX 7000 EX 7100 safety luminaires
Special colours
Contacts
Luminaire categories
Sicherheitstechnik GmbH
Lighting standards
EN 1838, prEN 1838 Lighting applications. Emergency lighting (07/99 + 05/11)
DIN 4844-1 / ISO3864 Graphical symbols - Safety colours and safety signs (06/12)
DIN 4844-2 Graphical symbols - Safety colours and safety signs (12/12)
DIN 4844-3 Graphical symbols - Safety colours and safety signs (09/03)
ASR A1.3 Health and safety signs (02/13)
ISO 7010 Graphical symbols – Safety colours and safety signs
Electrical standards
EN 60598-1 Luminaires – Part 1: General requirements and tests (09/09)
EN 60598-2-22 Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting (10/08)
DIN EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting
and similar equipment (11/09)
When the emergency lighting is in operation, the luminance of The planning of emergency light must be based on the worst
the safety colour must be at least 2 cd/m² at every point of the environmental conditions for the entire expected lifetime (e.g.
sign. highest glare, minimum luminous flux (self-contained lumi-
naires, light output reduced ballasts)).
The colours must meet the requirements of ISO 3864.
For direct illuminating luminaires only the direct light has to
A lamp‘s colour-rendering index, Ra, must be equal to at least be considered. Reflected light of surrounding walls must be
40. neglected.
The ratio of the luminance Lcontrast to the luminance Lsafety For indirect illuminating luminaires and ceiling floodlight,
colour must be no less than 5:1 and no more than 15:1. always working with a reflecting surface, only the first reflection
must be considered.
The ratio of the maximum luminance to the minimum lumi-
nance must not exceed 10:1 either within the white surface or If possible safety signs shouldn’t be mounted higher than 20°
within the safety colour. above the horizontal viewing line with respect to the maximum
viewing distance.
Safety and exit sign luminaires have to be illuminated or by an
internal or external illuminant. Fluorescent signs aren’t allowed.
Example: Viewing person 2m tall
EW 20m hmax = 9.2m
The light requirements of the standard are minimum values that EW 35m hmax = 14.7m
also have to be achieved at the end of life of every component.
6 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
z = constant
l = recognition distance
h = height of pictogram
Calculation formula: l = z · h
z = 100 - for illuminated signs, but only when the illuminance
on the surface of the sign is E ≥ 50lx.
z = 200 - for backlit signs (pictogram luminaires), but only when
the luminance is L ≥ 500cd/m² in mains operation.
Rule of thumb:
Pictogram signs need to be twice as large as pictogram lumi-
naires at the same recognition distance. Emergency signs according to ISO 7010
10/2012 and ASR A1.3 of 02/13
Examples
Note:
With the luminance L=500 cd/m² given above, the pictogram
should be sufficiently recognisable in bright surroundings. In order
to avoid glare effects, the luminance needs to be reduced in dark
surroundings, for instance by the use of INOTEC pictogram lumi-
The arrows may only be used in conjunction with an additional
naires with adjustable light output in monitored LED technology.
exit pictogram and vice-versa.
The arrows may be rotated in 45° increments.
In combination signs, the light edges between the pictograms
may be omitted.
Permitted pictograms:
w w w. i n o t e c - l i c h t . d e 7
Sicherheitstechnik GmbH
(*1) Interval between failure of the general lighting and achievement of required
illumination level by the emergency lighting
(*2) Measurement plane ≤ 2cm above the floor.
8 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Physiological glare
Physiological glare must be kept low by limiting the luminosity
of the luminaires within the field of vision.
For escape routes that run horizontally, the luminosity within an
area of 60° to 90° to the vertical must not exceed the values in
the table for all azimuth angles. For all other escape routes and
open areas, the limits must not be exceeded for any angle.
6 0°
6 0°
Mounting Maximum luminosity for escape Maximum luminosity for safety ligh-
height above route and open area emergency ting for hazardous areas Imax
the ground h lighting lmax
m cd cd
h < 2.5 500 1000
2.5 ≤ h < 3.0 900 1800
3.0 ≤ h < 3.5 1600 3200
3.5 ≤ h < 4.0 2500 5000
4.0 ≤ h < 4.5 3500 7000
h ≥ 4.5 5000 10000
w w w. i n o t e c - l i c h t . d e 9
Sicherheitstechnik GmbH
min. 2m
Electrical standards
The electrical standards are taken into account in INOTEC‘s own
construction and development and monitored by our quality
control. We guarantee that all INOTEC luminaires comply with
the current standards and regulations. You can find the corre-
sponding declarations of conformity on our homepage.
10 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Joker technology
Conventional
installation
requires
6 final circuits
Stromkreis 5
Stromkreis 6
Stromkreis 1 Stromkreis 2
w w w. i n o t e c - l i c h t . d e 11
Sicherheitstechnik GmbH
8W fluorescent lamp
No. of lights Type of light IBatt / mA IBatt / mA total
10 EE lights 32 320
16 Safety luminaire 32 512
Total current from battery / mA: 832
LED-Leuchtmittel
No. of lights Type of light IBatt / mA IBatt / mA total
10 EE lights 18 180
16 Safety luminaire 12 192
Total current from battery / mA: 372
700
600
500
8W LLP
400 372
LED- Leuchtmittel
300
200
100
0
12 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Operation- / Maintenance-costs
120,00 €
100,00 €
80,00 €
60,00 €
29,66 €
40,00 €
33,00 €
20,00 €
6,60 €
0,00 €
1 year 5 years
Power costs 8W LLP LED-illuminant 8W LLP LED-illuminant
9,1W 3,7W 9,1W 3,7W
Emergency exit luminaires are generally lit for 24 hours a Energy costs Illuminant costs Replacement costs
day, 365 days a year. By using INOTEC LED luminaires, you
can reduce your power costs by up to 60%.
Illuminant costs
A fluorescent lamp has an average service life of approx. 4,000
hours. At approx. 50,000 hours, the average service life of an
LED is more than 10 times higher.
Replacement costs
Changing the illuminant generates not just material costs but
also labour costs. These can vary considerably, depending
on the time and effort involved. Often a simple ladder is not
enough, and changing the illuminant can prove to be a very
time-consuming business.
w w w. i n o t e c - l i c h t . d e 13
Sicherheitstechnik
Sicherheitstechnik
GmbH
GmbH
6000
5600kg
5000
CO2-emission in kg
4000
3000
2310kg
2000
1000
0
1 year
costs 8W EVG costs LED
14 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Lighting technology
Illuminance E (lux)
Illuminance is a deciding factor in our visual performance.
Illuminance therefore has a major influence on how quickly and
safely people can leave a building in an emergency.
Illuminance indicates the relationship of the luminous flux fall-
ing perpendicularly on a surface to the illuminated surface.
Under DIN EN 1838, the minimum illuminance is 1 lux, meas- E=
Ф
A
ured on the central line of the escape route. The maintenance
factor must also be taken into consideration. For our spacing
xФ
s flu
=
ar
E = illumination
w w w. i n o t e c - l i c h t . d e 15
Sicherheitstechnik GmbH
Service life
The LEDs used by INOTEC have an average service life of approx.
50,000h. To achieve this service life, good thermal management
is required, as a LED’s service life essentially depends on the
temperature and the current flowing through it.
16 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 17
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Straight-Line
Meeting the highest demands
The “Straight-Line“ range of INOTEC emergency exit luminaires
is perfectly suited to modern architectural styles, as well as
offering high quality and ease of installation.
The luminaires have an eye-catchingly flat design and uniform
illumination. Thanks to their high luminance of > 500cd/m²,
they are ideal for use in bright environments, meeting the
requirements of DIN 4844-1.
Advantages
Cutting-edge lighting technology
High-quality materials
Attractive design
Easy to install
Easily interchangeable pictogram panels
Areas of application
Public buildings with attractive interior architecture
Offices
Commercial buildings
Theatres
Sales outlets
VIP areas
Hotels
Airports
SNP 1520 23
SNP 1530 28
FL 1530 32
w w w. i n o t e c - l i c h t . d e 19
SNP 1520 / SNP 1530
Sicherheitstechnik GmbH
High-quality materials
The INOTEC Straight-Line lluminaires made of high-quality
aluminium aluminium have an eye-catchingly flat design and
uniform illumination. Their high luminance of > 500cd/m²
makes them ideal for use in bright environments, meeting the
requirements of DIN 4844-1.
20 w w w. i n o t e c - l i c h t . d e
SNP 1520 / SNP 1530
Sicherheitstechnik GmbH
Maximum safety
In addition to using 3-chip LEDs, in Straight-Line luminaires the
LEDs are powered alternately. The LEDs are divided into three
phases and arranged alternately on the panel.
w w w. i n o t e c - l i c h t . d e 21
SNP 1520 / SNP 1530
Sicherheitstechnik
Sicherheitstechnik
GmbH
GmbH
Attractive design
With their slim design and six different mounting options,
Straight Line luminaires offer countless possibilities for integrat-
ing emergency lighting seamlessly into existing structures and
architecture.
Tool-free mounting
The luminaire have a clip-on, two-point mounting system, ena-
bling easy, tool-free installation. First install the installation unit
and connect the cable, and then just clip on the lighting unit.
22 w w w. i n o t e c - l i c h t . d e
SNP 1520 LED 230V
Straight-Line high quality emergency exit luminaires, SNP 1520 D LED 230V Ceiling mounting
made of powder coated aluminium profile of just Art-no. 801 281 - J/SV
14.5mm thickness without any visible screws. Slim Art-no. 801 291 - SKÜ
design and brilliant illumination by cutting-edge fibre Art-no. 801 296 - NE/SV
optics technology with a luminance of > 500cd/m².
236 54
Technical data
46,5
186
Viewing distance : 20 m
100
Material : Aluminum powder-coated
Illuminant : LEDs 200 14,5
Nominal voltage AC : 230V ± 10%, 50/60Hz 237
46,5
Protection category : IP40
Protection class : I
0,5m
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
200 14,5
237
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04 SNP 1520 S LED 230V Cable suspension mounting
Dark grey (RAL 7015) ... L16 Art-no. 801 282 - J/SV
Special colours ... L99 Art-no. 801 292 - SKÜ
Art-no. 801 297 - NE/SV
Attach the colour code to 236 54
part number e.g. 800 014 LXX
46,5
1,0m
137
100
200 14,5
237
50
275,5
65
137
100
200 14,5
237
w w w. i n o t e c - l i c h t . d e 23
SNP 1520 LED 230V
Straight-Line high quality emergency exit luminaires, SNP 1520 PM LED 230V Parallel to wall mounting
made of powder coated aluminium profile of just Art-no. 801 280 - J/SV
14.5mm thickness without any visible screws. Slim Art-no. 801 290 - SKÜ
design and brilliant illumination by cutting-edge fibre Art-no. 801 295 - NE/SV
optics technology with a luminance of >500cd/m².
Technical data
137
100
Viewing distance : 20 m 200 37 14,5
Material : Aluminum powder-coated 237
137
Protection category : IP40
100
Protection class : I
200 14,5
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 237
For cavety-wall-box
DIN EN 1838 installation,
depth 75mm
(e.g. Kaiser 9062-94)
Pictograms exchangeable without tools
200 14,5
237
For cavety-wall-box
installation,
depth 75mm
(e.g. Kaiser 9062-94)
24 w w w. i n o t e c - l i c h t . d e
SNP 1520 LED 24V
Straight-Line high quality emergency exit luminaires, SNP 1520 D LED 24V Ceiling mounting
made of powder coated aluminium profile of just Art. no. 810 140
14.5mm thickness without any visible screws. Slim
design and brilliant illumination by cutting-edge fibre
optics technology with a luminance of > 500cd/m². 236 30
25
Technical data
164
100
Viewing distance : 20 m
Material : Aluminum powder-coated 200 14,5
237
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 130 mA
SNP 1520 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 142
feed-through wiring
Temperature ta : -15°C... +40°C 236 30
25
Protection category : IP40
Protection class : III 0,5m
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
137
100
Pictograms exchangeable without tools
200 14,5
237
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04 SNP 1520 S LED 24V Cable suspension mounting
Dark grey (RAL 7015) ... L16 Art. no. 810 141
Special colours ... L99
236 30
25
200 14,5
237
250
65
50
275,5
65
137
100
200 14,5
237
w w w. i n o t e c - l i c h t . d e 25
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 1520 LED 24V
Straight-Line high quality emergency exit luminaires, SNP 1520 PM LED 24V Parallel to wall mounting
made of powder coated aluminium profile of just Art. no. 810 139
14.5mm thickness without any visible screws. Slim
design and brilliant illumination by cutting-edge fibre
optics technology with a luminance of > 500cd/m².
137
100
Technical data
200 37 14,5
237
Viewing distance : 20 m
Material : Aluminum powder-coated 208
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 70 mA
SNP 1520 WE LED 24V Recessed wall mounting
Terminals : 2.5 mm² for
Art. no. 810 143
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
137
Protection class : III
100
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 200 14,5
237
For wall-box
Pictograms exchangeable without tools installation
200 14,5
237
For wall-box
installation
w w w. i n o t e c - l i c h t . d e 27
SNP 1530 LED 230V
Straight-Line high quality emergency exit luminaires, SNP 1530 PM LED 230V Parallel to wall mounting
made of powder coated aluminium profile of just Art-no. 801 285 - J/SV
14.5mm thickness without any visible screws. Slim Art-no. 801 310 - SKÜ
design and brilliant illumination by cutting-edge fibre Art-no. 801 315 - NE/SV
optics technology with a luminance of > 500cd/m².
Technical data
187
150
Viewing distance : 30 m
37 14,5
Material : Aluminum powder-coated 300
337
Illuminant : LEDs 308
187
Protection category : IP40
150
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 300 14,5
337
DIN EN 1838 For double wall-box
installation,
depth 75mm
(e.g. Kaiser 9062-94)
Pictograms exchangeable without tools
300 14,5
337
For double wall-box
installation,
depth 75mm
(e.g. Kaiser 9062-94)
28 w w w. i n o t e c - l i c h t . d e
SNP 1530 LED 230V
Straight-Line high quality emergency exit luminaires, SNP 1530 D LED 230V Ceiling mounting
made of powder coated aluminium profile of just Art-no. 801 286 - J/SV
14.5mm thickness without any visible screws. Slim Art-no. 801 311 - SKÜ
design and brilliant illumination by cutting-edge fibre Art-no. 801 316 - NE/SV
optics technology with a luminance of > 500cd/m².
336 54
Technical data
46,5
236
Viewing distance : 30 m
150
Material : Aluminum powder-coated
Illuminant : LEDs 300 14,5
337
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
SNP 1530 P LED 230V Pendulum mounting
Power consumption : 9.2 VA
Art-no. 801 288 - J/SV
Terminals : 2.5 mm² for Art-no. 801 313 - SKÜ
feed-through wiring Art-no. 801 318 - NE/SV
Temperature ta : -15°C... +40°C 336 54
46,5
Protection category : IP40
Protection class : I
0,5m
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
187
150
Pictograms exchangeable without tools
300 14,5
337
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04 SNP 1530 S LED 230V Cable suspension mounting
Dark grey (RAL 7015) ... L16 Art-no. 801 287 - J/SV
Special colours ... L99 Art-no. 801 312 - SKÜ
Art-no. 801 317 - NE/SV
Attach the colour code to 336 54
part number e.g. 800 014 LXX
46,5
1,0m
187
150
300 14,5
337
300
65
50
375,5
65
187
150
300 14,5
337
w w w. i n o t e c - l i c h t . d e 29
SNP 1530 LED 24V
Straight-Line high quality emergency exit luminaires, SNP 1530 PM LED 24V Parallel to wall mounting
made of powder coated aluminium profile of just Art. no. 810 144
14.5mm thickness without any visible screws. Slim
design and brilliant illumination by cutting-edge fibre
optics technology with a luminance of > 500cd/m².
187
Technical data
150
300 37 14,5
Viewing distance : 30 m 337
308
Material : Aluminum powder-coated
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 100 mA
SNP 1530 WE LED 24V Recessed wall mounting
Terminals : 2.5 mm² for
Art. no. 810 148
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
187
150
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
300 14,5
337
For wall-box
Pictograms exchangeable without tools installation
300 14,5
337
For wall-box
installation
30 w w w. i n o t e c - l i c h t . d e
SNP 1530 LED 24V
Straight-Line high quality emergency exit luminaires, SNP 1530 D LED 24V Ceiling mounting
made of powder coated aluminium profile of just Art. no. 810 145
14.5mm thickness without any visible screws. Slim
design and brilliant illumination by cutting-edge fibre
optics technology with a luminance of > 500cd/m². 336 30
25
Technical data
214
150
Viewing distance : 30 m
Material : Aluminum powder-coated 300 14,5
337
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 180 mA
SNP 1530 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 147
feed-through wiring
Temperature ta : -15°C... +40°C 336 30
25
Protection category : IP40
Protection class : III 0,5m
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
187
150
Pictograms exchangeable without tools
300 14,5
337
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04 SNP 1530 S LED 24V Cable suspension mounting
Dark grey (RAL 7015) ... L16 Art. no. 810 146
Special colours ... L99
336 30
25
300 14,5
337
300
65
50
375,5
65
187
150
300 14,5
337
w w w. i n o t e c - l i c h t . d e 31
FL 1530 LED 230V
Single-sided dynamic Straight-Line emergency exit FL 1530 PM LED 230V Parallel to wall mounting
luminaire made of high quality aluminium. Ideal to Art. no. 800 141V
display the safe escape route depending on the smoke
situation inside a building.
187
150
Technical data
66
Viewing distance : 30 m 337
313
Material : Aluminum powder-coated
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 250
163
80
Art. no. 800 143V
Power consumption : 14.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
187
162
150
Protection category : IP40
Protection class : I 48
337
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 313 50
30
15
DIN EN 1838
ø5
30
163
80
32 w w w. i n o t e c - l i c h t . d e
FL 1530 LED 230V
Double-sided dynamic Straight-Line emergency exit FL 1530 D LED 230V Ceiling mounting
luminaire made of high quality aluminium. Ideal to Art. no. 800 147V
display the safe escape route depending on the smoke
situation inside a building.
313 50
Technical data
187
222
150
Viewing distance : 30 m
300 80
Material : Aluminum powder-coated 337
25
Illuminant : LEDs
20
50
ø5
56
Terminals : 2.5 mm² for
0,5m
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
187
150
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 300 80
337
DIN EN 1838
80
337
300
w w w. i n o t e c - l i c h t . d e 33
FL 1530 LED 24V
Single-sided dynamic Straight-Line emergency exit FL 1530 PM LED 24V Parallel to wall mounting
luminaire made of high quality aluminium. Ideal to Art. no. 800 140V
display the safe escape route depending on the smoke
situation inside a building.
187
Technical data
150
66
Viewing distance : 30 m 337
Illuminant : LEDs
Nominal voltage DC : 24V ± 20% 250
163
Terminals :
80
2.5 mm² for
Art. no. 800 142V
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
187
162
150
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
337 48
313 50
30
Pictograms exchangeable without tools
15
ø5
30
White (RAL 9016) ... L04
163
80
34 w w w. i n o t e c - l i c h t . d e
FL 1530 LED 24V
Double-sided dynamic Straight-Line emergency exit FL 1530 D LED 24V Ceiling mounting
luminaire made of high quality aluminium. Ideal to Art. no. 800 146V
display the safe escape route depending on the smoke
situation inside a building.
313 50
Technical data
187
222
150
Viewing distance : 30 m
Material : Aluminum powder-coated 300 80
337
Illuminant : LEDs 25
20
50
Nominal voltage DC : 24V ± 20% ø5
280
Nominal current : 200 mA (single-sided)
400 mA (double-sided) FL 1530 P LED 24V Pendulum mounting
Art. no. 800 144V
Terminals : 2.5 mm² for
feed-through wiring 308 46
Temperature ta : -15°C... +40°C
56
Protection category : IP40
0,5m
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
187
150
Pictograms exchangeable without tools 300 80
337
80
337
300
w w w. i n o t e c - l i c h t . d e 35
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Edge lights
Highlighting modern internal architecture
INOTEC edge lights with free-hanging pictogram panels do not
just provide faultless safety technology but also add the
perfect finishing touch to your interiors.
With forward-looking technologies and high-quality materials
in an elegant design, these luminaires set new standards for
functionality, flexibility and standard-compliant illumination.
Advantages
Attractive design
Easily interchangeable pictogram panels
Tool-free opening
Areas of application
Public buildings with attractive interior architecture
Offices
Shopping areas
Congress centres
VIP areas
Hotels
Airports
SNP 1214
SNP 1216 39
SNP 1116
SNP 1118 45
SNP 1016
SNP 1018
SNP 1023 51
w w w. i n o t e c - l i c h t . d e 37
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Quality and efficiency
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 39
SNP 1214 LED 24V
Discrete LED edge lights composed of high-quality SNP 1214 D LED 24V Ceiling mounting
anodised aluminium profile without any visible screws. Art. no. 810 000
Homogeneous illumination of the free hanging fra-
meless 20 mm acrylic pictograph by state-of-the-art
LED technology. Discreet housing thanks to latest 24V 176 28
technology.
39
134
Technical data
95
Viewing distance : 16 m
168 20
Material : Aluminum
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
SNP 1214 PM LED 24V Parallel to wall mounting
Nominal current : 100 mA Art. no. 810 001
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C 176 39
Protection category :
28
IP40
Protection class : III
123
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
95
DIN EN 1838
168 20
Pictograms exchangeable without tools
216
53
6
95
232
40 w w w. i n o t e c - l i c h t . d e
SNP 1214 LED 24V
Discrete LED edge lights composed of high-quality SNP 1214 P LED 24V Pendulum mounting
anodised aluminium profile without any visible screws. Art. no. 810 080
Homogeneous illumination of the free hanging fra-
meless 20 mm acrylic pictograph by state-of-the-art 176 28
LED technology. Discreet housing thanks to latest 24V
technology.
0,5m
Technical data
39
134
Viewing distance : 16 m
95
Material : Aluminum
168 20
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
SNP 1214 S LED 24V Cable suspension mounting
Nominal current : 100 mA Art. no. 810 081
Terminals : 2.5 mm² for
feed-through wiring 176 28
39
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
134
95
Pictograms exchangeable without tools 168 20
w w w. i n o t e c - l i c h t . d e 41
SNP 1216 LED 24V
Discrete LED edge lights composed of high-quality SNP 1216 D LED 24V Ceiling mounting
anodised aluminium profile without any visible screws. Art. no. 810 002
Homogeneous illumination of the free hanging fra-
meless 20 mm acrylic pictograph by state-of-the-art
LED technology. Discreet housing thanks to latest 24V 256 28
technology.
39
180
141
Technical data
Viewing distance : 22 m
249 20
Material : Aluminum
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
SNP 1216 PM LED 24V Parallel to wall mounting
Nominal current : 125 mA Art. no. 810 003
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C 256 39
28
Protection category : IP40
169
Protection class : III
141
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
249 20
Pictograms exchangeable without tools
295
53
6
141
312
42 w w w. i n o t e c - l i c h t . d e
SNP 1216 LED 24V
Discrete LED edge lights composed of high-quality SNP 1216 P LED 24V Pendulum mounting
anodised aluminium profile without any visible screws. Art. no. 810 004
Homogeneous illumination of the free hanging fra-
meless 20 mm acrylic pictograph by state-of-the-art 256 28
LED technology. Discreet housing thanks to latest 24V
technology. 0,5m
39
Technical data
180
141
Viewing distance : 22 m
Material : Aluminum
249 20
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
SNP 1216 S LED 24V Cable suspension mounting
Nominal current : 125 mA Art. no. 810 005
Terminals : 2.5 mm² for
feed-through wiring 256 28
39
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
180
141
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 43
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 1116 / SNP 1118
Sicherheitstechnik GmbH
Finishing touches
The INOTEC edge lights SNP 1116 and SNP 1118 will win you
over with their operation, luminosity, service life and design. The
adjustable pictogram makes these high-quality stainless steel
luminaires particularly versatile and suitable for almost any type
of installation. Which means that you can find the ideal solution
for any wall and interior space.
w w w. i n o t e c - l i c h t . d e 45
SNP 1116 LED 230V
High quality, versatile LED edge lights made of brushed SNP 1116 D LED 230V Ceiling mounting
stainless steel. Art. no. 801 185 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 180 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 089 - NE/SV
technology.
40
Technical data
231
170
Viewing distance : 22 m
Material : Stainless steel brushed
250
Illuminant : LEDs 286 55
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 17 mA SNP 1116 P LED 230V Pendulum mounting
Art. no. 801 485 - J/SV
Power consumption : 4.5 VA
Art. no. 801 480 - SKÜ
Terminals : 2.5 mm² for Art. no. 801 489 - NE/SV
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40 40
500
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
170
250
286 55
250
286 55
64
293 111
55
147
250
308 86
46 w w w. i n o t e c - l i c h t . d e
SNP 1116 LED 24V
High quality, versatile LED edge lights made of brushed SNP 1116 D LED 24V Ceiling mounting
stainless steel. Art. no. 810 051
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
40
231
Technical data
170
Viewing distance : 22 m
250
Material : Stainless steel brushed 286 55
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 85 mA SNP 1116 P LED 24V Pendulum mounting
Art. no. 810 052
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta :
40
-15°C... +40°C
Protection category : IP40
500
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
170
250
286 55
250
286 55
298
64
293 111
55
147
250
308 86
w w w. i n o t e c - l i c h t . d e 47
SNP 1118 LED 230V
High quality, versatile LED edge lights made of brushed SNP 1118 D LED 230V Ceiling mounting
stainless steel. Art. no. 801 195 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 190 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 199 - NE/SV
technology.
40
Technical data
278
217
Viewing distance : 30 m
Material : Stainless steel brushed
Illuminant : LEDs 325
361 55
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 22 mA SNP 1118 P LED 230V Pendulum mounting
Art. no. 801 495 - J/SV
Power consumption : 5.3 VA
Art. no. 801 490 - SKÜ
Terminals : 2.5 mm² for Art. no. 801 499 - NE/SV
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40 40
500
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
217
325
361 55
325
361 55
64
368 111
55
192
325
383 86
48 w w w. i n o t e c - l i c h t . d e
SNP 1118 LED 24V
High quality, versatile LED edge lights made of brushed SNP 1118 D LED 24V Ceiling mounting
stainless steel. Art. no. 810 173
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
40
278
Technical data
217
Viewing distance : 30 m
Material : Stainless steel brushed 325
361 55
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 125 mA SNP 1118 P LED 24V Pendulum mounting
Art. no. 810 174
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
40
Protection category : IP40
500
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
217
325
361 55
325
361 55
373
64
368 111
55
192
325
383 86
w w w. i n o t e c - l i c h t . d e 49
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 1016 / SNP 1018
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 51
SNP 1016.2 LED 230V
Functional edge lights made of high quality aluminium SNP 1016.2 D LED 230V Ceiling mounting
profile. Art. no. 801 163.2 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 153.2 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 173.2 - NE/SV
technology.
Technical data
203
Viewing distance : 22 m
Material : Aluminum
250
Illuminant : LEDs 275 54
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 17 mA
SNP 1016.2 PM LED 230V Parallel to wall mounting
Power consumption : 4.5 VA
Art. no. 801 363.2 - J/SV
Terminals : 2.5 mm² for Art. no. 801 353.2 - SKÜ
feed-through wiring Art. no. 801 373.2 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 203
DIN EN 1838
250
Pictograms exchangeable without tools 275 58
64
293 111
55
147
250
308 86
78
18,5
25 25
85,5
32
25
69
72,6
32
25
297
52 w w w. i n o t e c - l i c h t . d e
SNP 1016.2 LED 230V
Functional edge lights made of high quality aluminium SNP 1016.2 P LED 230V Pendulum mounting
profile. Art. no. 801 463.2 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 453.2 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 473.2 - NE/SV
technology.
Viewing distance : 22 m
Material : Aluminum 203
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 250
275 54
Nominal voltage DC : 220V ± 20%
Nominal current : 17 mA
SNP 1016.2 WA LED 230V Wall bracket mounting
Power consumption : 4.5 VA
Art. no. 801 263.2 - J/SV
Terminals : 2.5 mm² for Art. no. 801 253.2 - SKÜ
feed-through wiring Art. no. 801 273.2 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
223
DIN EN 1838
3,0m
243
203
250
275 54
w w w. i n o t e c - l i c h t . d e 53
SNP 1016.2 LED 24V
Functional edge lights made of high quality aluminium SNP 1016.2 D LED 24V Ceiling mounting
profile. Art. no. 810 096.2
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
Technical data
203
Viewing distance : 22 m
250
Material : Aluminum 275 54
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 85 mA
SNP 1016.2 PM LED 24V Parallel to wall mounting
Terminals : 2.5 mm² for
Art. no. 810 098.2
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 203
DIN EN 1838
250
Pictograms exchangeable without tools 275 58
64
293 111
55
147
250
308 86
78
18,5
25 25
85,5
32
25
69
72,6
32
25
297
54 w w w. i n o t e c - l i c h t . d e
SNP 1016.2 LED 24V
Functional edge lights made of high quality aluminium SNP 1016.2 P LED 24V Pendulum mounting
profile. Art. no. 810 097.2
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
500
Technical data
250
Pictograms exchangeable without tools 304 54
203
250
275 54
w w w. i n o t e c - l i c h t . d e 55
SNP 1018.2 LED 230V
Functional edge lights made of high quality aluminium SNP 1018.2 D LED 230V Ceiling mounting
profile. Art. no. 801 169.2 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 159.2 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 179.2 - NE/SV
technology.
Technical data
249
Viewing distance : 30 m
Material : Aluminum
Illuminant : LEDs 325
350 54
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 22 mA
SNP 1018.2 PM LED 230V Parallel to wall mounting
Power consumption : 5.3 VA
Art. no. 801 369.2 - J/SV
Terminals : 2.5 mm² for Art. no. 801 359.2 - SKÜ
feed-through wiring Art. no. 801 379.2 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 249
DIN EN 1838
64
368 111
55
192
325
383 86
78
18,5
25 25
85,5
32
25
69
72,6
32
25
370
56 w w w. i n o t e c - l i c h t . d e
SNP 1018.2 LED 230V
Functional edge lights made of high quality aluminium SNP 1018.2 P LED 230V Pendulum mounting
profile. Art. no. 801 469.2 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 459.2 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 479.2 - NE/SV
technology.
Viewing distance : 30 m
Material : Aluminum 249
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 325
350 54
Nominal voltage DC : 220V ± 20%
Nominal current : 22 mA
SNP 1018.2 WA LED 230V Wall bracket mounting
Power consumption : 5.3 VA
Art. no. 801 269.2 - J/SV
Terminals : 2.5 mm² for Art. no. 801 259.2 - SKÜ
feed-through wiring Art. no. 801 279.2 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 270
DIN EN 1838
3,0m
246
249
325
350 54
w w w. i n o t e c - l i c h t . d e 57
SNP 1018.2 LED 24V
Functional edge lights made of high quality aluminium SNP 1018.2 D LED 24V Ceiling mounting
profile. Art. no. 810 101.2
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
Technical data
249
Viewing distance : 30 m
Material : Aluminum 325
350 54
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 125 mA
SNP 1018.2 PM LED 24V Parallel to wall mounting
Terminals : 2.5 mm² for
Art. no. 810 103.2
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 249
DIN EN 1838
64
368 111
55
192
325
383 86
78
18,5
25 25
85,5
32
25
69
72,6
32
25
370
58 w w w. i n o t e c - l i c h t . d e
SNP 1018.2 LED 24V
Functional edge lights made of high quality aluminium SNP 1018.2 P LED 24V Pendulum mounting
profile. Art. no. 810 102.2
Homogeneous illumination of the frameless, free han-
ging 20 mm acrylic pictograph by state-of-the-art LED
technology.
500
220
Technical data
Material : Aluminum
Illuminant : LEDs 325
350 54
Nominal voltage DC : 24V ± 20%
Nominal current : 125 mA
SNP 1018.2 WA LED 24V Wall bracket mounting
Terminals : 2.5 mm² for
Art. no. 810 104.2
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 270
DIN EN 1838
249
325
350 54
w w w. i n o t e c - l i c h t . d e 59
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 1023.1 LED 230V
Functional edge lights made of high quality aluminium SNP 1023.1 D LED 230V Ceiling mounting
profile. Art. no. 801 760 - J/SV
Homogeneous illumination of the frameless, free han- Art. no. 801 750 - SKÜ
ging 20 mm acrylic pictograph by state-of-the-art LED Art. no. 801 770 - NE/SV
technology.
Technical data
Viewing distance : 50 m
365
Material : Aluminum
Illuminant : LEDs 580 54
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 85 mA
SNP 1023.1 PM LED 230V Parallel to wall mounting
Power consumption : 21.6 VA
Art. no. 801 766 - J/SV
Terminals : 2.5 mm² for Art. no. 801 756 - SKÜ
feed-through wiring Art. no. 801 776 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
365
220
365
580 54
602
64
597 120
55
310
608 86
w w w. i n o t e c - l i c h t . d e 61
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Aluminium luminaires
The all-rounder
The standout feature of INOTEC aluminium luminaires is the enor-
mous number of application possibilities. Due to their range of
housing sizes and the option of different colours, these aluminium
luminaires can be configured to suit any building‘s interior design.
Advantages
Attractive design
Easily interchangeable pictogram panels
Tool-free opening
Areas of application
Public buildings with attractive interior architecture
Offices SNP 7184/7284 64
Shopping areas
SNP 7186/7286 68
SNP 7188/7288 73
FL 7188/7288 78
SNP 7183/7283 82
SNP 7166.1 UP 87
SNP 7168.1 UP 90
w w w. i n o t e c - l i c h t . d e 63
SNP 7184 LED 230V
Single sided aluminium profile emergency exit lumin- SNP 7184 LED 230V Wall mounting
aires with light output bottom side. Art. no. 807 534 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 533 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 537 - NE/SV
Technical data
80
Viewing distance : 12 m
Material : Aluminum 225 80
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 12 mA
Power consumption : 5.0 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
64 w w w. i n o t e c - l i c h t . d e
SNP 7284 LED 230V
Double sided aluminium profile emergency exit lumin- SNP 7284 LED 230V Ceiling mounting
aires with light output bottom side. Art. no. 807 544 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 543 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 548 - NE/SV
Technical data
6
Viewing distance : 12 m
80
Material : Aluminum
Illuminant : LEDs 225 80
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 18 mA
Power consumption : 6.1 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 65
SNP 7184 LED 24V
Single sided aluminium profile emergency exit lumin- SNP 7184 LED 24V Wall mounting
aires with light output bottom side. Art. no. 810 058
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
Technical data
80
Viewing distance : 12 m 225 80
Material : Aluminum
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
66 w w w. i n o t e c - l i c h t . d e
SNP 7284 LED 24V
Double sided aluminium profile emergency exit lumin- SNP 7284 LED 24V Ceiling mounting
aires with light output bottom side. Art. no. 810 042
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
Technical data
6
80
Viewing distance : 12 m
Material : Aluminum 225 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 67
SNP 7186 LED 230V
Single sided aluminium profile emergency exit lumin- SNP 7186 LED 230V Wall mounting
aires with light output bottom side. Art. no. 807 342 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 332 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 352 - NE/SV
Technical data
122
Viewing distance : 20 m
Material : Aluminum
253 80
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 12 mA
Power consumption : 5.0 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
68 w w w. i n o t e c - l i c h t . d e
SNP 7286 LED 230V
Double sided aluminium profile emergency exit lumin- SNP 7286 D LED 230V Ceiling mounting
aires with light output bottom side. Art. no. 807 576 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 571 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 596 - NE/SV
25
Viewing distance : 20 m
122
Material : Aluminum
Illuminant : LEDs
253 80
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 18 mA
SNP 7286 P LED 230V Pendulum mounting
Power consumption : 6.1 VA
Art. no. 807 578 - J/SV
Terminals : 2.5 mm² for Art. no. 807 574 - SKÜ
feed-through wiring Art. no. 807 598 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
500
253 80
Housing-colours Part.no. Colour code
Special colours ... L99 SNP 7286 WA LED 230V Wall bracket mounting
Art. no. 807 579 - J/SV
Attach the colour code to Art. no. 807 575 - SKÜ
part number e.g. 800 014 LXX Art. no. 807 599 - NE/SV
260
25
122
253 80
140
122
253 80
w w w. i n o t e c - l i c h t . d e 69
SNP 7186 LED 24V
Single sided aluminium profile emergency exit lumin- SNP 7186 LED 24V Wall mounting
aires with light output bottom side. Art. no. 810 021
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
Technical data
122
Viewing distance : 20 m
253 80
Material : Aluminum
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
70 w w w. i n o t e c - l i c h t . d e
SNP 7286 LED 24V
Double sided aluminium profile emergency exit lumin- SNP 7286 D LED 24V Ceiling mounting
aires with light output bottom side. Art. no. 810 022
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
235
25
Technical data
122
Viewing distance : 20 m
Material : Aluminum
253 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
SNP 7286 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 023
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 500
DIN EN 1838
122
260
25
122
253 80
140
122
253 80
w w w. i n o t e c - l i c h t . d e 71
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 7188 LED 230V
Single sided aluminium profile emergency exit lumin- SNP 7188 LED 230V Wall mounting
aires with light output bottom side. Art. no. 807 372 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 362 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 382 - NE/SV
Technical data
192
Viewing distance : 35 m
Material : Aluminum
Illuminant : LEDs 342 80
w w w. i n o t e c - l i c h t . d e 73
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 7288 LED 230V
Double sided aluminium profile emergency exit lumin- SNP 7288 D LED 230V Ceiling mounting
aires with light output bottom side. Art. no. 807 607 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 606 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 608 - NE/SV
25
Viewing distance : 35 m
192
Material : Aluminum
Illuminant : LEDs
342 80
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
SNP 7288 P LED 230V Pendulum mounting
Power consumption : 8.3 VA
Art. no. 807 617 - J/SV
Terminals : 2.5 mm² for Art. no. 807 614 - SKÜ
feed-through wiring Art. no. 807 637 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40 500
20
20
192
342 80
246
192
342 80
w w w. i n o t e c - l i c h t . d e 75
SNP 7188 LED 24V
Single sided aluminium profile emergency exit lumin- SNP 7188 LED 24V Wall mounting
aires with light output bottom side. Art. no. 810 046
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
Technical data
192
Viewing distance : 35 m
Material : Aluminum 342 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
76 w w w. i n o t e c - l i c h t . d e
SNP 7288 LED 24V
Double sided aluminium profile emergency exit lumin- SNP 7288 D LED 24V Ceiling mounting
aires with light output bottom side. Art. no. 810 047
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
260
25
Technical data
192
Viewing distance : 35 m
Material : Aluminum
342 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
SNP 7288 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 048
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
500
Protection class : III 220
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
192
342 80
246
192
342 80
w w w. i n o t e c - l i c h t . d e 77
FL 7188 LED 230V
Dynamic single-sided emergency exit luminaire made FL 7188 LED 230V Wall mounting
of high quality aluminium profile. Ideal to display the Art. no. 800 101V
safe escape route depending on the smoke situation
inside a building.
Technical data
192
Viewing distance : 35 m
Material : Aluminum 342 80
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 33 mA
Power consumption : 14.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
78 w w w. i n o t e c - l i c h t . d e
FL 7288 LED 230V
Dynamic double-sided emergency exit luminaire made FL 7288 D LED 230V Ceiling mounting
of high quality aluminium profile. Ideal to display the Art. no. 800 103V
safe escape route depending on the smoke situation
inside a building.
260
25
Technical data
192
Viewing distance : 35 m
Material : Aluminum
342 80
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
FL 7288 P LED 230V Pendulum mounting
Nominal current : 33 mA (single-sided)
Art. no. 800 107V
66 mA (double-sided)
Power consumption : 14.3 VA (single-sided)
28.6 VA (double-sided)
500
Terminals : 2.5 mm² for 220
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
192
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 342 80
DIN EN 1838
342 80
246
192
342 80
w w w. i n o t e c - l i c h t . d e 79
FL 7188 LED 24V
Dynamic single-sided emergency exit luminaire made FL 7188 LED 24V Wall mounting
of high quality aluminium profile. Ideal to display the Art. no. 800 100V
safe escape route depending on the smoke situation
inside a building.
Technical data
192
Viewing distance : 35 m
Material : Aluminum 342 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
80 w w w. i n o t e c - l i c h t . d e
FL 7288 LED 24V
Dynamic double-sided emergency exit luminaire made FL 7288 D LED 24V Ceiling mounting
of high quality aluminium profile. Ideal to display the Art. no. 800 102V
safe escape route depending on the smoke situation
inside a building.
260
25
Technical data
192
Viewing distance : 35 m
Material : Aluminum
342 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA (single-sided)
400 mA (double-sided) FL 7288 P LED 24V Pendulum mounting
Art. no. 800 106V
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
500
Protection category : IP40 220
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
192
20
20
192
342 80
246
192
342 80
w w w. i n o t e c - l i c h t . d e 81
SNP 7183 LED 230V
Single sided aluminium profile emergency exit lumin- SNP 7183 LED 230V Wall mounting
aires with light output bottom side. Art. no. 807 327 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 326 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 328 - NE/SV
Technical data
300
Viewing distance : 60 m
Material : Aluminum
Illuminant : LEDs 600 80
82 w w w. i n o t e c - l i c h t . d e
SNP 7283 LED 230V
Double sided aluminium profile emergency exit lumin- SNP 7283 D LED 230V Ceiling mounting
aires with light output bottom side. Art. no. 807 640 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 639 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 641 - NE/SV
Viewing distance : 60 m
300
Material : Aluminum
Illuminant : LEDs 600 80
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 41 mA
SNP 7283 P LED 230V Pendulum mounting
Power consumption : 18.7 VA
Art. no. 807 646 - J/SV
Terminals : 2.5 mm² for Art. no. 807 645 - SKÜ
feed-through wiring Art. no. 807 647 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40 500
Protection class : I
220
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
300
600 80
255
300
600 80
w w w. i n o t e c - l i c h t . d e 83
SNP 7183 LED 24V
Single sided aluminium profile emergency exit lumin- SNP 7183 LED 24V Wall mounting
aires with light output bottom side. Art. no. 810 159
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
Technical data
300
Viewing distance : 60 m
Material : Aluminum 600 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
84 w w w. i n o t e c - l i c h t . d e
SNP 7283 LED 24V
Double sided aluminium profile emergency exit lumin- SNP 7283 D LED 24V Ceiling mounting
aires with light output bottom side. Art. no. 810 153
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m².
316
Technical data
300
Viewing distance : 60 m
Material : Aluminum 600 80
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 400 mA
SNP 7283 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 155
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
500
Protection class : III
220
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
300
600 80
255
300
600 80
w w w. i n o t e c - l i c h t . d e 85
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 7166.1 LED UP 230V
Single sided aluminium profile emergency exit lumin- SNP 7166.1 LED UP w. wall-anchor Recessed wall mounting
aires for recessed wall mounting. Invisible frame with an Art. no. 807 295 - J/SV
installation depth of 60mm. Homogeneous illumination Art. no. 807 294 - SKÜ
by state-of-the-art LED technology with a luminance of Art. no. 807 296 - NE/SV
>500cd/m².
Technical data
27,5
Illuminant : LEDs
100
Ø20
72,5
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 18 mA
SNP 7166.1 LED UP w/o wallanchor Recessed wall mounting
Power consumption : 6.1 VA
Art. no. 807 292 - J/SV
Terminals : 2.5 mm² for Art. no. 807 291 - SKÜ
feed-through wiring Art. no. 807 293 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
100
DIN EN 1838
200 60
w w w. i n o t e c - l i c h t . d e 87
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 7166.1 LED UP 24V
Single sided aluminium profile emergency exit lumin- SNP 7166.1 LED UP w. wall-anchor Recessed wall mounting
aires for recessed wall mounting. Invisible frame with an Art. no. 810 152
installation depth of 60mm. Homogeneous illumination
by state-of-the-art LED technology with a luminance of
>500cd/m².
Technical data
200
142
Ø 4,5 25
Viewing distance : 20 m
27,5
Material : Aluminum
100
Ø20
72,5
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
SNP 7166.1 LED UP w/o wallanchor Recessed wall mounting
Terminals : 2.5 mm² for
Art. no. 810 150
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 100
DIN EN 1838
200 60
w w w. i n o t e c - l i c h t . d e 89
SNP 7168.1 LED UP 230V
Single sided aluminium profile emergency exit lumin- SNP 7168.1 LED UP w. wallanchor Recessed wall mounting
aires for recessed wall mounting. Invisible frame with an Art. no. 807 282 - J/SV
installation depth of 60mm. Homogeneous illumination Art. no. 807 281 - SKÜ
by state-of-the-art LED technology with a luminance of Art. no. 807 283 - NE/SV
>500cd/m².
Technical data
320
211
Viewing distance : 32 m 4,5 30
Ø 4,5
Material :
52
Aluminum
160
Illuminant : LEDs Ø 20
79
108
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 18 mA
SNP 7168.1 LED UP w/o wallanchor Recessed wall mounting
Power consumption : 8.3 VA
Art. no. 807 272 - J/SV
Terminals : 2.5 mm² for Art. no. 807 271 - SKÜ
feed-through wiring Art. no. 807 273 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
160
DIN EN 1838
320 60
90 w w w. i n o t e c - l i c h t . d e
SNP 7168.1 LED UP 24V
Single sided aluminium profile emergency exit lumin- SNP 7168.1 LED UP w. wallanchor Recessed wall mounting
aires for recessed wall mounting. Invisible frame with an Art. no. 810 151
installation depth of 60mm. Homogeneous illumination
by state-of-the-art LED technology with a luminance of
>500cd/m².
Ø 4,5
52
Viewing distance : 32 m
160
Material : Aluminum Ø 20
79
108
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
SNP 7168.1 LED UP w/o wallanchor Recessed wall mounting
Terminals : 2.5 mm² for
Art. no. 810 149
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 160
DIN EN 1838
320 60
w w w. i n o t e c - l i c h t . d e 91
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Advantages
Reduces number of exit signs
Easy to install
Areas of application
Warehouses
Workplaces
Sales outlets
SNP 7460 94
SNP 7463 96
w w w. i n o t e c - l i c h t . d e 93
SNP 7460 LED 230V
Cubic emergency exit luminaires made of aluminium SNP 7460 D LED 230V Ceiling mounting
profile. Art. no. 807 924 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 904 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 929 - NE/SV
195 x 195
Technical data
230
Viewing distance : 35 m
170
Material : Aluminum
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
170 x 170
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
SNP 7460 P LED 230V Pendulum mounting
Power consumption : 8.3 VA
Art. no. 807 926 - J/SV
Terminals : 2.5 mm² for Art. no. 807 906 - SKÜ
feed-through wiring Art. no. 807 931 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
500
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
230
170
150x150
230
170
170 x 170
94 w w w. i n o t e c - l i c h t . d e
SNP 7460 LED 24V
Cubic emergency exit luminaires made of aluminium SNP 7460 D LED 24V Ceiling mounting
profile. Art. no. 810 071
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m². 195 x 195
Technical data
230
170
Viewing distance : 35 m
Material : Aluminum
Illuminant : LEDs
170 x 170
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
SNP 7460 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 089
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
500
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
230
170
Housing-colours Part.no. Colour code
Special colours ... L99 170 x 170
150x150
230
170
170 x 170
w w w. i n o t e c - l i c h t . d e 95
SNP 7463 LED 230V
Cubic emergency exit luminaires made of aluminium SNP 7463 D LED 230V Ceiling mounting
profile. Art. no. 807 955 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 807 953 - SKÜ
technology with a luminance of >500cd/m². Art. no. 807 957 - NE/SV
330 x 330
Technical data
367
Viewing distance : 60 m
307
Material : Aluminum
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
307 x 307
Nominal voltage DC : 220V ± 20%
Nominal current : 85 mA
SNP 7463 P LED 230V Pendulum mounting
Power consumption : 21.6 VA
Art. no. 807 964 - J/SV
Terminals : 2.5 mm² for Art. no. 807 963 - SKÜ
feed-through wiring Art. no. 807 965 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
226x226
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
367
307
307 x 307
96 w w w. i n o t e c - l i c h t . d e
SNP 7463 LED 24V
Cubic emergency exit luminaires made of aluminium SNP 7463 D LED 24V Ceiling mounting
profile. Art. no. 810 092
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m². 330 x 330
Technical data
367
307
Viewing distance : 60 m
Material : Aluminum
Illuminant : LEDs
307 x 307
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
SNP 7463 P LED 24V Pendulum mounting
Terminals : 2.5 mm² for
Art. no. 810 167
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
226x226
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
367
DIN EN 1838
307
Housing-colours Part.no. Colour code
Special colours ... L99 307 x 307
226x226
367
307
307 x 307
w w w. i n o t e c - l i c h t . d e 97
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
SN 6205 120
SN 6206-11 123
SN 6307 125
FS 1100 129
FL 3100 130
w w w. i n o t e c - l i c h t . d e 99
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6109 24V
Rectangular LED safety luminaires to illuminate steps or SN 6109 LED Recessed wall or
escape routes. Recessed wall and stair mounting. Design Art. no. 806 050 stair mounting
with brushed stainless steel cover.
160
Technical data
65
Material : Stainless steel brushed
180
Illuminant : LEDs
Nominal voltage DC : 24V ± 20% 120
35
Terminals : 1.5mm²
4
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
Projekt 1
24.03.2012
DIN EN 1838
INOTEC Sicherheitstechnik GmbH
Am Buschgarten 17
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 22
w w w. i n o t e c - l i c h t . d e 101
SN 6110 LED 230V
Rectangular LED safety luminaires to illuminate steps SN 6110 G LED 230V Recessed wall or
or escape routes. Recessed wall and stair mounting. Art. no. 806 014 - J/SV stair mounting
Design with powder-coated metal cover. For installation Art. no. 806 013 - SKÜ
in double-cavity-wall-box (Kaiser 9062-94). Art. no. 806 015 - NE/SV
Technical data
8 4
21
Material : powder-coated steel-sheet
Illuminant : LEDs 155 74, 2 5
30
100
K a i s e r 9062-94
White (RAL 9016) ... L04
White aluminium (RAL 9006) ... L10
Special colours ... L99
Am Buschgarten 17
59469 Ense
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
800 014 LXX
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
Projekt 1
24.03.2012
INOTEC Sicherheitstechnik GmbH
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Am
Buschgarten 17 Fax 02938 / 97 30 6 -η =
130
59469 Ense e-Mail sven.nienhaus@gmx.de
Seite 20
η =
SN 6110 O LED
102 w w w. i n o t e c - l i c h t . d e
Seite 21
SN 6110 LED 24V
Rectangular LED safety luminaires to illuminate steps SN 6110 G LED 24V Recessed wall or
or escape routes. Recessed wall and stair mounting. Art. no. 810 165 stair mounting
Design with powder-coated metal cover. For installation
in double-cavity-wall-box (Kaiser 9062-94).
Technical data
8 4
21
Material : powder-coated steel-sheet 155 74, 2 5
8 4
DIN EN 1838
30
100
155 74, 2 5
Housing-colours Part.no. Colour code
K a i s e r 9062-94
White (RAL 9016) ... L04
White aluminium (RAL 9006) ... L10
Special colours ... L99
Am Buschgarten 17
59469 Ense
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
800 014 LXX
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
Projekt 1
24.03.2012
INOTEC Sicherheitstechnik GmbH
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Am
Buschgarten 17 Fax 02938 / 97 30 6 -η =
130
59469 Ense e-Mail sven.nienhaus@gmx.de
Seite 20
η =
SN 6110 O LED
Seite 21
w w w. i n o t e c - l i c h t . d e 103
SN 6114 LED 230V
Robust LED safety luminaires to illuminate steps or SN 6114 G LED 230V Recessed wall or
escape routes. Recessed wall and stair mounting. Made Art. no. 806 025 - J/SV stair mounting
of high-quality die-cast aluminium with high protection Art. no. 806 005 - SKÜ
category. Art. no. 806 031 - NE/SV
Technical data
70
260 70
Material : die-cast aluminum
70
Illuminant : LEDs
260 70
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
60
Nominal current : 25 mA 245
Power consumption : 7.1 VA
Terminals : 2.5 mm² for
SN 6114 O LED 230V Recessed wall or
feed-through wiring
Art. no. 806 024 - J/SV stair mounting
Temperature ta : -15°C... +40°C Art. no. 806 004 - SKÜ
Protection category : IP54
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
70
245
24.03.2012
66
245 55
Projekt 1
24.03.2012
INOTEC Sicherheitstechnik GmbH
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Am
Buschgarten 17 130=
Fax 02938 / 97 30 6 - η
59469 Ense e-Mail sven.nienhaus@gmx.de
Seite 18
η =
SN 6114 O LED
Seite 19
104 w w w. i n o t e c - l i c h t . d e
SN 6114 LED 24V
Robust LED safety luminaires to illuminate steps or SN 6114 G LED 24V Recessed wall or
escape routes. Recessed wall and stair mounting. Made Art. no. 810 070 stair mounting
of high-quality die-cast aluminium with high protection
category.
70
Technical data 260 70
70
Material : die-cast aluminum
260 70
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
60
Nominal current : 150 mA 245
Terminals : 2.5 mm² for
feed-through wiring
SN 6114 O LED 24V Recessed wall or
Protection category : IP54
Art. no. 810 072 stair mounting
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
70
260 70
24.03.2012
Concrete installation box SN 1614 Optional accessory
Art. no. 040 598
309
144 90
81
60
66
245 55
Projekt 1
24.03.2012
INOTEC Sicherheitstechnik GmbH
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Am
Buschgarten 17 130=
Fax 02938 / 97 30 6 - η
59469 Ense e-Mail sven.nienhaus@gmx.de
Seite 18
η =
SN 6114 O LED
Seite 19
w w w. i n o t e c - l i c h t . d e 105
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6124 LED 24V
Round LED safety luminaires to illuminate steps or SN 6124 LED 24V Recessed wall or
escape routes. Recessed wall and stair mounting in a Art. no. 806 300 stair mounting
68mm switch-box. Design with brushed stainless steel
cover.
ø81
Material : Stainless steel brushed
61
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
6
Nominal current : 125 mA
Terminals : 1.5mm²
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
Projekt 1
24.03.2012
DIN EN 1838
INOTEC Sicherheitstechnik GmbH
Am Buschgarten 17
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 17
w w w. i n o t e c - l i c h t . d e 107
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6203.1 LED 24V
Slim LED safety luminaire to illuminate steps or escape SN 6203.1 G LED 24V Wall or stair mounting
routes for wall or stair mounting. Housing made of Art. no. 806 230
aluminium with brushed stainless steel cover.
Technical data
30
Material : Aluminum / Stainless steel A4
200 28
brushed
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 100 mA
Terminals : 1.5mm²
SN 6203.1 O LED 24V Wall or stair mounting
Temperature ta : -15°C... +40°C
Art. no. 806 228
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
Projekt 1
24.03.2012
DIN EN 1838
INOTEC Sicherheitstechnik GmbH
Am Buschgarten 17
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
Projekt 1
18.03.2013
Seite 16
η =
SN 6203.1 G LED
Seite 1
w w w. i n o t e c - l i c h t . d e 109
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6204.2 LED 230V
Trapezoidal LED safety luminaire for illumination of SN 6204.2 LED 230V Wall mounting
escape routes and exit doors. Luminaire for wall moun- Art. no. 806 408 - J/SV
ting with high protection category and elegant housing Art. no. 806 407 - SKÜ
made of powder coated stainless steel without visible Art. no. 806 409 - NE/SV
screws. 152
Technical data
145,3
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
210 4 63
Nominal current : 25 mA
Power consumption : 7.1 VA
Mounting adapter Optional accessory
Terminals : 2.5 mm² for
Art. no. 890 723
feed-through wiring
Temperature ta : -15°C... +40°C
36
Protection category : IP65
52
Protection class : I
131
149
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
134
170
27
White (RAL 9016) ... L04 229
Dark grey (RAL 7015) ... L16
Special colours ... L99 Poller console Optional accessory
Art. no. 890 609
Attach the colour code to
part number e.g. 800 014 LXX
219
146
213 52
Wall mounting
Mounting height [m] [m] [m] [m]
Distance to middle of escape route
1036
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 / O135
398
77
O133 O61
η =
w w w. i n o t e c - l i c h t . d e 111
Seite 15
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6204.2 LED 24V
Trapezoidal LED safety luminaire for illumination of SN 6204.2 LED 24V Wall mounting
escape routes and exit doors. Luminaire for wall moun- Art. no. 810 187
ting with high protection category and elegant housing
made of powder coated stainless steel without visible 152
screws.
Technical data
145,3
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
210 4 63
Nominal current : 150 mA
Terminals : 2.5 mm² for
feed-through wiring Mounting adapter Optional accessory
Art. no. 890 723
Temperature ta : -15°C... +40°C
Protection category : IP65
36
52
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
131
149
DIN EN 1838
134
Housing-colours Part.no. Colour code 170
173
White (RAL 9016) ... L04
27
Dark grey (RAL 7015) ... L16 229
Special colours ... L99
Poller console Optional accessory
Attach the colour code to
part number e.g. 800 014 LXX Art. no. 890 609
219
146
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 /
O135
Measuring plane 2cm above floor level
Leuchte: INOTEC Sicherheitstechnik GmbH INOTEC SN 6204
Lampen: 1 x Inotec LED Modul SL09-01
94
398
77
O133 O61
η =
w w w. i n o t e c - l i c h t . d e Seite 15
113
Sicherheitstechnik GmbH
w w
www .wi n. i on t oe tce- cl -i cl ihc t h. td . ed e
SNP 2004.1
Sicherheitstechnik GmbH
Fire fighting- and first aid facilities have to be specially marked Compared to an illuminated sign, back-lit emergency signs are
and illuminated by 5 lux according to DIN EN 1838 of October having the benefit of a very good visibility in bright surround-
2013. The direct surrounding (distance of min. 2 meter) has to ings due to their luminance of > 500cd/m². Fire fighting equip-
be illuminated as well. ment and first aid facilities can be located very quickly in emer-
gency situations. The integrated safety light will be switched
The new combined safety- and safety sign luminaire SNP
on in case of a mains failure and illuminates the respective area
2004.1 is the ideale luminaire to indicate and illuminate areas
according to the standards.
with fire fighting equipment, first aid stations and other impor-
tant areas.
w w w. i n o t e c - l i c h t . d e 115
SNP 2004.1 LED 230V
Versatile LED safety luminaire ideal for illumination of SNP 2004.1 LED 230V Wall mounting
areas to be highlighted especially according to DIN Art. no. 802 145.1V - J/SV
EN 1838. Luminaire with separately switchable, backlit
pictograph. UV resistant, heat filament tested polycar-
bonate housing for wall mounting with optional side
cable entry.
Technical data
125
Viewing distance : 18 m
Material : Polycarbonate white
Illuminant : LEDs 115,5
Nominal voltage AC : 230V ± 10%, 50/60Hz q 185 80,5
Wall mounting
Mounting height [m] [m] [m] [m]
Distance to middle of escape route
1.0m 2.0m 3.0m
1.0 2.2 5.4 2.3 5.7 1.8 5.2
2.0 2.8 7.0 2.8 7.2 2.3 6.8
2.5 3.0 7.4 3.0 7.8 2.6 7.4
3.0 3.1 8.0 3.1 8.4 2.7 8.1
3.5 3.2 8.5 3.2 8.7 2.8 8.5
4.0 3.1 8.7 3.1 9.1 2.8 8.8
4.5 3.0 9.0 3.0 9.3 2.7 9.0
5.0 2.8 9.0 2.8 9.3 2.5 9.1
Projekt 1
5.5 2.6 9.0 2.6 9.3 2.0 9.1
24.03.2012
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 /
η =
116 w w w. i n o t e c - l i c h t . d e
Seite 15
SN 2004.1 LED 230V
Versatile LED safety luminaire ideal for escape route or SN 2004.1 LED 230V Wall mounting
staircase illumination. UV resistant, heat filament tested Art. no. 802 137.1 - J/SV
polycarbonate housing for wall mounting with optional Art. no. 802 136.1 - SKÜ
side cable entry. Art. no. 802 138.1 - NE/SV
Technical data
125
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 25 mA 115,5
Power consumption : 7.1 VA q 185 80,5
Wall mounting
Mounting height [m] [m] [m] [m]
Distance to middle of escape route
1.0m 2.0m 3.0m
1.0 2.2 5.4 2.3 5.7 1.8 5.2
2.0 2.8 7.0 2.8 7.2 2.3 6.8
2.5 3.0 7.4 3.0 7.8 2.6 7.4
3.0 3.1 8.0 3.1 8.4 2.7 8.1
3.5 3.2 8.5 3.2 8.7 2.8 8.5
4.0 3.1 8.7 3.1 9.1 2.8 8.8
4.5 3.0 9.0 3.0 9.3 2.7 9.0
5.0 2.8 9.0 2.8 9.3 2.5 9.1
Projekt 1
5.5 2.6 9.0 2.6 9.3 2.0 9.1
24.03.2012
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 /
η =
w w w. i n o t e c - l i c h t . d e Seite 15
117
SNP 2004.1 LED 24V
Versatile LED safety luminaire ideal for illumination of SNP 2004.1 LED 24V Wall mounting
areas to be highlighted especially according to DIN Art. no. 810 218.1V
EN 1838. Luminaire with separately switchable, backlit
pictograph. UV resistant, heat filament tested polycar-
bonate housing for wall mounting with optional side
cable entry.
125
Technical data
Viewing distance : 18 m
Material : Polycarbonate white 115,5
Illuminant : LEDs q 185 80,5
Luminaire with two separate addresses for individual Eye douche Defibrillator First Aid
monitoring of the safety luminaire and the backlit
pictograph!
Wall mounting
Mounting height [m] [m] [m] [m]
Distance to middle of escape route
1.0m 2.0m 3.0m
1.0 2.2 5.4 2.3 5.7 1.8 5.2
2.0 2.8 7.0 2.8 7.2 2.3 6.8
2.5 3.0 7.4 3.0 7.8 2.6 7.4
3.0 3.1 8.0 3.1 8.4 2.7 8.1
3.5 3.2 8.5 3.2 8.7 2.8 8.5
4.0 3.1 8.7 3.1 9.1 2.8 8.8
4.5 3.0 9.0 3.0 9.3 2.7 9.0
5.0 2.8 9.0 2.8 9.3 2.5 9.1
Projekt 1
5.5 2.6 9.0 2.6 9.3 2.0 9.1
24.03.2012
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 /
η =
118 w w w. i n o t e c - l i c h t . d e
Seite 15
SN 2004.1 LED 24V
Versatile LED safety luminaire ideal for escape route or SN 2004.1 LED 24V Wall mounting
staircase illumination. UV resistant, heat filament tested Art. no. 810 208.1
polycarbonate housing for wall mounting with optional
side cable entry.
Technical data
125
Material : Polycarbonate white
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
115,5
Nominal current : 150 mA q 185 80,5
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Wall mounting
Mounting height [m] [m] [m] [m]
Distance to middle of escape route
1.0m 2.0m 3.0m
1.0 2.2 5.4 2.3 5.7 1.8 5.2
2.0 2.8 7.0 2.8 7.2 2.3 6.8
2.5 3.0 7.4 3.0 7.8 2.6 7.4
3.0 3.1 8.0 3.1 8.4 2.7 8.1
3.5 3.2 8.5 3.2 8.7 2.8 8.5
4.0 3.1 8.7 3.1 9.1 2.8 8.8
4.5 3.0 9.0 3.0 9.3 2.7 9.0
5.0 2.8 9.0 2.8 9.3 2.5 9.1
Projekt 1
5.5 2.6 9.0 2.6 9.3 2.0 9.1
24.03.2012
Am Buschgarten 17
59469 Ense
6.0 2.2 8.8 2.1
Bearbeiter(in) Sven Nienhaus
9.2
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
1.5 8.9
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
INOTEC Sicherheitstechnik GmbH INOTEC SN 6204 /
η =
Seite 15
w w w. i n o t e c - l i c h t . d e 119
SN 6205 LED
Sicherheitstechnik GmbH
The lettering, and housing and LED colour can all be configured to
your personal specifications.
Examples
Project Lettering LED colour Application
Clinic Röntgen red Lights up when x-ray machine in use
(x-rays on)
Depart- Rohrpost amber Lights up when tube mail comes in
ment store (tube mail)
Hotel 116 white Illuminated room number and corridor
lighting
120 w w w. i n o t e c - l i c h t . d e
SN 6205 LED 24V
Elegant LED safety and orientation luminaire wit- SN 6205 LED 24V Wall mounting
hout any visible screws. Luminaire for wall mounting Art. no. 810 125
allowing individual, creative, project based safety- and
signing concepts.
230
Technical data 183
30
Material : Aluminum / powder-coated
steel-sheet
Illuminant : LEDs
50
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
Terminals : 2.5 mm² without
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
η =
Seite 14
w w w. i n o t e c - l i c h t . d e 121
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6206-11 LED 24V
Trapezoidal LED safety luminaire for illumination of SN 6206-11 LED 24V Wall mounting
escape routes and exit doors. Luminaire for wall moun- Art. no. 810 209
ting with high protection category and elegant housing
made of powder coated stainless steel without visible ø80
screws.
Technical data
88
44
52
Illuminant : LEDs
76
8
Nominal voltage DC : 24V ± 20%
50
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Wall mounting
Mounting height [m] [m]
2.0 2.2 5.4
2.5 2.4 6.2
3.0 2.5 6.8
3.5 2.5 7.2
4.0 2.3 7.4
4.5 2.0 7.4
5.0 1.6 7.2
Projekt 1 5.5 0.7 7.0 24.03.2012
η =
Seite 34
w w w. i n o t e c - l i c h t . d e 123
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 6307
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 125
SN 6307 LED 230V
Bollard luminaire
for connection to group-, central battery- or NEA - systems J/SV SKÜ NE/SV
Elegant LED bollard luminaire ideal for outdoor escape SN 6307 LED 230V Floor installation
route illumination made of powder-coated aluminium Art. no. 806 308 - J/SV
with high protection category. Art. no. 806 307 - SKÜ
Art. no. 806 309- NE/SV
Technical data
150 125
94
Material : Aluminum powder-coated
Illuminant : LEDs
870
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
28
60
Power consumption : 8.3 VA
146
144
Terminals : 2.5 mm² for 219
feed-through wiring
Temperature ta : -15°C... +40°C Erdstück Pollerkonsole Optional accessory
Protection category : IP54 Art. no. 040 821
Protection class : II
O100
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
O135
94
Housing-colours Part.no. Colour code
398
O133 O61
Attach the colour code to
part number e.g. 800 014 LXX
Wall mounting
Mounting height [m] [m]
Projekt 1
0.85 4.0 10.4 12.03.2014
Bearbeiter(in)
Telefon
Seite 1
126 w w w. i n o t e c - l i c h t . d e
SN 6307 LED 24V
Bollard luminaire
for connection to CLS 24, CPUSB 220/64/24 or CP 24V
Elegant LED bollard luminaire ideal for outdoor escape SN 6307 LED 24V Floor installation
route illumination made of powder-coated aluminium Art. no. 810 317
with high protection category.
150 125
Technical data
94
Material : Aluminum powder-coated
870
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
28
Nominal current : 200 mA 60
146
144
Terminals : 2.5 mm² for
219
feed-through wiring
Temperature ta : -15°C... +40°C
Erdstück Pollerkonsole Optional accessory
Protection category : IP54 Art. no. 040 821
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and O100
DIN EN 1838
O135
94
Dark grey (RAL 7015) ... L16 398
Wall mounting
Mounting height [m] [m]
Projekt 1
0.85 4.0 10.4 12.03.2014
Bearbeiter(in)
Telefon
Seite 1
w w w. i n o t e c - l i c h t . d e 127
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
FS 1100 BE/TE LED 48V
Dynamic Escape Route luminaire for floor installation, FS 1100 BE LED 48V Flush floor installation
including run light functionality. Ideal to display the Art. no. 800 161
safe escape route depending on the smoke situation
inside a building. Power supply by a PSU 48.
44,3 10,2
Technical data
ø120
50,3
Material : Stainless steel A4 brushed
(panel)
Plastic (case)
73,5
Illuminant : LEDs
Nominal voltage DC : 48V ± 10%
Nominal current : 35 mA FS 1100 TE LED 48V Flush carpet installation
Terminals : 1.5 mm² for Art. no. 800 160
feed-through wiring
Temperature ta : -15°C... +40°C
51,5 3
Protection category : IP65
Protection class : III O136
50,3
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Color... 73,5
w w w. i n o t e c - l i c h t . d e 129
FL 3100 WE LED 230V
Dynamic emergency exit luminaire for recessed wall FL 3100 WE LED 230V Recessed wall mounting
installation and modular design with customisable Art. no. 800 152V
assembly. Ideal to display the safe escape route depen-
ding on the smoke situation inside a building. With
integrated LED safety luminaire. 313,5 59
Technical data
213,5
184
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : Per module 9 mA
(white+green LEDs) FL 3100 WE_S LED 230V Recessed wall mounting
Art. no. 800 152V
Power consumption : Per module 2.0 VA
(white+green LEDs)
Terminals : 2.5 mm² for
313,5 55
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
213,5
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
130 w w w. i n o t e c - l i c h t . d e
FL 3100 WE LED 24V
Dynamic emergency exit luminaire for recessed wall FL 3100 WE LED 24V Recessed wall mounting
installation and modular design with customisable Art. no. 800 151V
assembly. Ideal to display the safe escape route depen-
ding on the smoke situation inside a building. With
integrated LED safety luminaire. 313,5 59
Technical data
213,5
184
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : Per module 63 mA
(white+green LEDs)
Terminals : 2.5 mm² for FL 3100 WE_S LED 24V Recessed wall mounting
feed-through wiring Art. no. 800 151V
Temperature ta : -15°C... +40°C
Protection category : IP40
313,5 55
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
213,5
w w w. i n o t e c - l i c h t . d e 131
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Advantages
Robust housing in A4 brushed stainless steel
Protection categories IP54 / IP65
Areas of application
Food industry
High-risk task areas
Outdoor areas
Car parks
Corrosive environments
FL 808/828 142
SN 804.1 147
FS 804.1 149
SN 804.1 WT 151
w w w. i n o t e c - l i c h t . d e 133
SNP 818 LED 230V
Single sided emergency exit luminaires made of robust, SNP 818 LED 230V Wall mounting
brushed stainless steel with high protection category. Art. no. 808 818 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 808 808 - SKÜ
technology with a luminance of >500cd/m². Suitable for Art. no. 808 819 - NE/SV
use in food industry or food processing plants with high
demands on product hygiene.
110
Technical data
72
Viewing distance : 17 m
Material : Stainless steel brushed
340
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 18 mA
Power consumption : 6.1 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP54
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
134 w w w. i n o t e c - l i c h t . d e
SNP 818 LED 24V
Single sided emergency exit luminaires made of robust, SNP 818 LED 24V Wall mounting
brushed stainless steel with high protection category. Art. no. 810 157
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m². Suitable for
use in food industry or food processing plants with high
demands on product hygiene.
110
Technical data 72
Viewing distance : 17 m
340
Material : Stainless steel brushed
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP54
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 135
SNP 808 LED 230V
Single sided emergency exit luminaires made of robust, SNP 808 LED 230V Wall mounting
brushed stainless steel with high protection category. Art. no. 808 817 - J/SV
Homogeneous illumination by state-of-the-art LED Art. no. 808 807 - SKÜ
technology with a luminance of >500cd/m². Suitable for Art. no. 808 813 - NE/SV
use in food industry or food processing plants with high
demands on product hygiene.
198
Technical data
Viewing distance : 30 m 75
Material : Stainless steel brushed
Illuminant : LEDs 348
136 w w w. i n o t e c - l i c h t . d e
SNP 828 LED 230V
Double sided emergency exit luminaires made of SNP 828 K LED 230V Chain mounting
robust, brushed stainless steel with high protection Art. no. 808 863 - J/SV
category. Homogeneous illumination by state-of-the-art Art. no. 808 853 - SKÜ
LED technology with a luminance of >500cd/m². Sui- Art. no. 808 866 - NE/SV
table for use in food industry or food processing plants
with high demands on product hygiene.
Technical data
198
Viewing distance : 30 m 78
Material : Stainless steel brushed
Illuminant : LEDs 348
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
SNP 828 WA LED 230V Wall bracket mounting
Nominal current : 32 mA Art. no. 808 868 - J/SV
Power consumption : 8.3 VA Art. no. 808 867 - SKÜ
Terminals : 2.5 mm² for Art. no. 808 869 - NE/SV
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
198
160
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 82
DIN EN 1838
348
398
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
Dark grey (RAL 7015) ... L16
Special colours ... L99
w w w. i n o t e c - l i c h t . d e 137
SNP 808 LED 24V
Single sided emergency exit luminaires made of robust, SNP 808 LED 24V Wall mounting
brushed stainless steel with high protection category. Art. no. 810 018
Homogeneous illumination by state-of-the-art LED
technology with a luminance of >500cd/m². Suitable for
use in food industry or food processing plants with high
demands on product hygiene.
198
Technical data
75
Viewing distance : 30 m
Material : Stainless steel brushed 348
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
138 w w w. i n o t e c - l i c h t . d e
SNP 828 LED 24V
Double sided emergency exit luminaires made of SNP 828 K LED 24V Chain mounting
robust, brushed stainless steel with high protection Art. no. 810 011
category. Homogeneous illumination by state-of-the-art
LED technology with a luminance of >500cd/m². Sui-
table for use in food industry or food processing plants
with high demands on product hygiene.
198
Technical data
78
Viewing distance : 30 m
Material : Stainless steel brushed 348
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
SNP 828 WA LED 24V Wall bracket mounting
Nominal current : 200 mA Art. no. 810 130
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
198
Protection class : III 160
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 82
DIN EN 1838
348
398
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
Dark grey (RAL 7015) ... L16
Special colours ... L99
w w w. i n o t e c - l i c h t . d e 139
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
FL 808 LED 230V
Dynamic single-sided emergency exit luminaire made FL 808 LED 230V Wall mounting
of robust stainless steel with high protection category. Art. no. 800 181V
Ideal to display the safe escape route depending on the
smoke situation inside a building.
198
Technical data
Viewing distance : 30 m 75
Material : Stainless steel A4 brushed
Illuminant : LEDs 348
142 w w w. i n o t e c - l i c h t . d e
FL 808 LED 24V
Dynamic single-sided emergency exit luminaire made FL 808 LED 24V Wall mounting
of robust stainless steel with high protection category. Art. no. 800 180V
Ideal to display the safe escape route depending on the
smoke situation inside a building.
198
Technical data
Viewing distance : 30 m 75
Material : Stainless steel A4 brushed
Illuminant : LEDs 348
w w w. i n o t e c - l i c h t . d e 143
FL 828 LED 230V
Dynamic double-sided emergency exit luminaire made FL 828 K LED 230V Chain mounting
of robust stainless steel with high protection category. Art. no. 800 183V
Ideal to display the safe escape route depending on the
smoke situation inside a building.
Technical data
198
Viewing distance : 30 m
78
Material : Stainless steel A4 brushed
Illuminant : LEDs 348
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
FL 828 WA LED 230V Wall bracket mounting
Nominal current : 33 mA (single-sided)
Art. no. 800 185V
66 mA (double-sided)
Power consumption : 14.3 VA (single-sided)
28.6 VA (double-sided)
Terminals : 2.5 mm² for
198
160
feed-through wiring
Temperature ta : -15°C... +40°C
82
Protection category : IP65
Protection class : I 348
398
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
144 w w w. i n o t e c - l i c h t . d e
FL 828 LED 24V
Dynamic double-sided emergency exit luminaire made FL 828 K LED 24V Chain mounting
of robust stainless steel with high protection category. Art. no. 800 182V
Ideal to display the safe escape route depending on the
smoke situation inside a building.
Technical data
198
Viewing distance : 30 m
78
Material : Stainless steel A4 brushed
Illuminant : LEDs 348
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA (single-sided)
400 mA (double-sided) FL 828 WA LED 24V Wall bracket mounting
Art. no. 800 184V
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
198
160
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 82
DIN EN 1838
348
Housing-colours Part.no. Colour code 398
w w w. i n o t e c - l i c h t . d e 145
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 804 LED 230V
Robust stainless steel luminaires with high protection SN 804 D LED 230V Ceiling mounting
category and latest LED-technology for area or escape Art. no. 808 411 - J/SV
route illumination. Suitable for use in food industry or Art. no. 808 410 - SKÜ
food processing plants with high demands on product Art. no. 808 412 - NE/SV
hygiene.
Technical data 60
120
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
SN 804 D AP LED 230V Wall or ceiling mounting
Terminals : 2.5 mm² for
30
Art. no. 808 431 - J/SV
feed-through wiring
Art. no. 808 430 - SKÜ
Temperature ta : -15°C... +40°C Art. no. 808 40
432 - NE/SV
70
Protection category : IP65
Protection class : I
25
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 50 60
DIN EN 1838
62
q 85
137
124
η =
w w w. i n o t e c - l i c h t . d e Seite 30
147
SN 804 LED 24V
Robust stainless steel luminaires with high protection SN 804 D LED 24V Ceiling mounting
category and latest LED-technology for area or escape Art. no. 810 126
route illumination. Suitable for use in food industry or
food processing plants with high demands on product
hygiene. 60
Technical data
120
Material : Stainless steel brushed
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring SN 804 D AP LED 24V Wall or ceiling mounting
30
Art. no. 810 128
Temperature ta : -15°C... +40°C
Protection category : IP65 40
70
Protection class : III 25
50 60
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
60
Ceiling mounting
Mounting height [m] [m] [m]
q 120
Am Buschgarten 17
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
Art. no. 810 127
59469 Ense e-Mail sven.nienhaus@gmx.de
q 160
q 85
137
124
η =
Seite 30
148 w w w. i n o t e c - l i c h t . d e
FS 804.1 LED 48V
Dynamic Escape Route luminaire for segmental use, FS 804.1 W LED 48V Wall mounting
including run light functionality, for indication of the Art. no. 800 028
safe escape route, depending on the location of detec-
ted smoke or fire. Made of stainless steel with a high
protection category. 60
Technical data
120
Material : Stainless steel A4 brushed
Illuminant : LEDs
Nominal voltage DC : 48V ± 10%
Nominal current : 35 mA
Terminals : 2.5 mm² for
feed-through wiring FS 804.1 W AP LED 48V Wall mounting
30
Art. no. 800 029
Temperature ta : -15°C... +40°C
Protection category : IP65 40
70
Protection class : III 25
50 60
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and DIN EN
1838
60
q 120
62
q 160
q 85
137
124
w w w. i n o t e c - l i c h t . d e 149
Sicherheitstechnik GmbH
150 w w
www .wi n
. i on toe t ce- cl -i lc ihc th. td . ed e
SN 804.1 WT
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 151
SN 804.1 LED 230V
Robust LED safety luminaire, ideal for area or escape SN 804.1 W T LED 230V Wall or ceiling mounting
route illumination. Lockable mounting bracket to align Art. no. 808 181 - J/SV
to the area to be illuminated. Housing made of brushed Art. no. 808 180 - SKÜ
stainless steel with high protection category. Suitable Art. no. 808 182 - NE/SV
for use in food industry or food processing plants with
60
high demands on product hygiene.
Technical data
q 120
Material : Stainless steel brushed
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
η =
152 w w w. i n o t e c - l i c h t . d e
Seite 27
SN 804.1 LED 24V
Robust LED safety luminaire, ideal for area or escape SN 804.1 W T LED 24V Wall or ceiling mounting
route illumination. Lockable mounting bracket to align Art. no. 810 215
to the area to be illuminated. Housing made of brushed
stainless steel with high protection category. Suitable 60
for use in food industry or food processing plants with
high demands on product hygiene.
q 120
Technical data
Ceiling mounting
Mounting height [m] [m] [m]
11.0 4.6 11.1
12.0 4.7 11.5
14.0 4.9 12.5
16.0 5.0 13.2
18.0 5.0 13.7
20.0 5.0 14.0
22.0 4.9 14.2
24.0 4.6 14.3
26.0 4.2 14.3
28.0 3.7 14.1
Projekt 1
30.0 2.9 14.1
32.0 0.9 13.6
24.03.2012
η =
w w w. i n o t e c - l i c h t . d e 153
Seite 27
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
SN 9127-11
SN 9107-11 166
Advantages
Low power consumption
Easy to install
Cutting-edge lighting technology SN 9024 169
Areas of application
Public buildings
Workplaces
High-bay warehouses SN 8141.1 170
Congress centres
Hotels
Office buildings
Sales outlets
Airports SN 8124.1 172
SN 8127-11 175
SN 8040 176
SN 8106-11 181
SN 2040 183
SN 8001 189
w w w. i n o t e c - l i c h t . d e 155
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 9100
Sicherheitstechnik GmbH
35
00
43
w w w. i n o t e c - l i c h t . d e 157
SN 9100 TES 230V
High-quality LED downlight, ideal for area or escape SN 9100 TES round Recessed ceiling mounting
route illumination. Perfect for combined usage of safety Art. no. 809 001 - 2700K
and general lighting. Possible adaption to the light Art. no. 809 002 - 3500K
colour of the general lighting by Translucent-Emitting- Art. no. 809 003 - 4300K
Surface (TES) technology. Powder-coated aluminium
housing without any visible screws designed for tool-
less recessed ceiling installation in a ceiling cut-out Ø
ø85
ø59
68mm.
Technical data
ø 68
Material : Aluminum powder-coated
32
Illuminant : LEDs / TES
2
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Supply unit Accessory
Nominal current : 32 mA Art. no. 890 490 - J/SV
Power consumption : 8.3 VA Art. no. 890 491 - SKÜ
Terminals : 2.5 mm² for Art. no. 890 492 - NE/SV
feed-through wiring
Temperature ta : -15°C... +40°C 184 52
Protection category : IP20
38
63
Protection class : II
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 49
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5m 3.7 9.4
3.0m 3.8 10.1
4.0m 4.1 11.0
Projekt 1 5.0m 4.1 11.6
6.0m 3.8 11.7
13.06.2013
η =
Seite 1
158 w w w. i n o t e c - l i c h t . d e
SN 9100 TES 24V
High-quality LED downlight, ideal for area or escape SN 9100 TES round Recessed ceiling mounting
route illumination. Perfect for combined usage of safety Art. no. 809 001 - 2700K
and general lighting. Possible adaption to the light Art. no. 809 002 - 3500K
colour of the general lighting by Translucent-Emitting- Art. no. 809 003 - 4300K
Surface (TES) technology. Powder-coated aluminium
housing without any visible screws designed for tool-
less recessed ceiling installation in a ceiling cut-out Ø
ø85
ø59
68mm.
Technical data
ø 68
Material : Aluminum powder-coated
32
Illuminant : LEDs / TES
2
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Supply unit Accessory
Terminals : 2.5 mm² for Art. no. 890 613
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP20 184 52
Protection class : III
38
63
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 49
Ceiling mounting
Mounting height [m] [m] [m]
2.5m 3.7 9.4
3.0m 3.8 10.1
4.0m 4.1 11.0
Projekt 1 5.0m 4.1 11.6
6.0m 3.8 11.7
13.06.2013
η =
Seite 1
w w w. i n o t e c - l i c h t . d e 159
SN 9104.1-11 LED 230V
Elegant LED downlights with powder-coated metal SN 9104.1-11 LED round Recessed ceiling mounting
cover without any visible screws, ideal for area or Art. no. 809 400
escape route illumination. Tool-less recessed ceiling
installation in a ceiling cut-out Ø 68mm.
Technical data
ø85
Material : Stainless steel A4 brushed /
ø 68
powder-coated steel-sheet
2 28
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 12 mA
SN 9104.1-11 LED squared Recessed ceiling mounting
Power consumption : 5.0 VA
Art. no. 809 401
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
ø 68
Protection category : IP20
2 28
Protection class : II
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
q85
DIN EN 1838
184 52
38
Ceiling mounting
63
5.5
Am Buschgarten 17
1.1 7.2
INOTEC Sicherheitstechnik GmbH Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 34
160 w w w. i n o t e c - l i c h t . d e
SN 9104.1-11 LED 24V
Elegant LED downlights with powder-coated metal SN 9104.1-11 LED round Recessed ceiling mounting
cover without any visible screws, ideal for area or Art. no. 809 400
escape route illumination. Tool-less recessed ceiling
installation in a ceiling cut-out Ø 68mm.
Technical data
ø85
Material : Stainless steel A4 brushed /
ø 68
powder-coated steel-sheet
2 28
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring SN 9104.1-11 LED squared Recessed ceiling mounting
Art. no. 809 401
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
ø 68
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
2 28
DIN EN 1838 q85
184 52
Ceiling mounting
Mounting height [m] [m] [m]
38
63
5.5
Am Buschgarten 17
1.1 7.2
INOTEC Sicherheitstechnik GmbH Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 34
w w w. i n o t e c - l i c h t . d e 161
SN 9104.1-41 LED 230V
Elegant LED downlights with powder-coated metal SN 9104.1-41 LED round Recessed ceiling mounting
cover without any visible screws, ideal for area or Art. no. 809 407
escape route illumination. Tool-less recessed ceiling
installation in a ceiling cut-out Ø 68mm.
Technical data
ø85
Material : Stainless steel A4 brushed /
ø 68
powder-coated steel-sheet
2 28
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
SN 9104.1-41 LED squared Recessed ceiling mounting
Power consumption : 8.3 VA
Art. no. 809 408
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
ø 68
Protection category : IP20
2 28
Protection class : II
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
q85
DIN EN 1838
184 52
38
Ceiling mounting
63
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130 13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
162 w w w. i n o t e c - l i c h t . d e
Seite 28
SN 9104.1-41 LED 24V
Elegant LED downlights with powder-coated metal SN 9104.1-41 LED round Recessed ceiling mounting
cover without any visible screws, ideal for area or Art. no. 809 407
escape route illumination. Tool-less recessed ceiling
installation in a ceiling cut-out Ø 68mm.
Technical data
ø85
Material : Stainless steel A4 brushed /
ø 68
powder-coated steel-sheet
2 28
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring SN 9104.1-41 LED squared Recessed ceiling mounting
Art. no. 809 408
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
ø 68
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
2 28
DIN EN 1838 q85
184 52
Ceiling mounting
Mounting height [m] [m] [m]
38
63
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130 13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 28
w w w. i n o t e c - l i c h t . d e 163
SN 9124.1-11 LED 24V
Elegant LED downlight for area or escape route illumi- SN 9124.1-11 LED round Recessed ceiling mounting
nation with powder-coated metal cover, without any Art. no. 810 116
visible screws. Tool-less installation in a 68mm switch-
box incl. LED driver / monitoring.
61
ø85
powder-coated steel-sheet
Illuminant : LEDs
5
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring SN 9124.1-11 LED squared Recessed ceiling mounting
Art. no. 810 118
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and ø68
DIN EN 1838 q 85
61
Housing-colours Part.no. Colour code
5
White (RAL 9016) ... L04
Stainless steel ... L30
Special colours ... L99
Supply unit Accessory
Attach the colour code to
part number e.g. 800 014 LXX Art. no. 890 450
Ceiling mounting
Mounting height [m] [m] [m]
2.5 2.6 6.6
3.0 2.7 7.2
3.5 2.6 7.5
4.0 2.5 7.7
4.5 2.2 7.6 ø 60 46
ø 70
Projekt 1
5.0 1.8 7.4 24.03.2012
Am Buschgarten 17
5.5 1.1
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
7.2
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 3
164 w w w. i n o t e c - l i c h t . d e
SN 9124.1-41 LED 24V
Elegant LED downlight for area or escape route illumi- SN 9124.1-41 LED round Recessed ceiling mounting
nation with powder-coated metal cover, without any Art. no. 810 117
visible screws. Tool-less installation in a 68mm switch-
box incl. LED driver / monitoring.
ø85
61
powder-coated steel-sheet
Illuminant : LEDs
5
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring SN 9124.1-41 LED squared Recessed ceiling mounting
Art. no. 810 119
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and ø68
DIN EN 1838 q 85
61
Housing-colours Part.no. Colour code
5
White (RAL 9016) ... L04
Stainless steel ... L30
Special colours ... L99
Supply unit Accessory
Attach the colour code to
part number e.g. 800 014 LXX Art. no. 890 450
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9 ø 60 46
ø 70
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1 9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130 13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 5
w w w. i n o t e c - l i c h t . d e 165
SN 9127-11 LED 24V
Elegant LED downlight ideal for area or escape route SN 9127-11 LED round Recessed ceiling mounting
illumination, with powder-coated metal cover, without Art. no. 810 312
any visible screws and asymmetric light distribution.
Tool-less installation in a 68mm switch-box incl. LED
driver / monitoring.
ø68
Technical data
ø85
61
Material : Stainless steel A4 brushed /
powder-coated steel-sheet
5
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for SN 9127-11 LED squared Recessed ceiling mounting
feed-through wiring Art. no. 810 313
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III ø68
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
q85
61
Housing-colours Part.no. Colour code
5
White (RAL 9016) ... L04
Stainless steel ... L30
Special colours ... L99 Supply unit Accessory
Art. no. 890 450
Attach the colour code to
part number e.g. 800 014 LXX
Ceiling mounting
Mounting height [m] [m] [m] [m] [m]
2.5 4.2 10.9 2.7 1.0
Projekt 1
3.0 4.5 11.6 2.8 0.9
4.0 Bearbeiter(in)
Telefon
0.8 12.5
30.08.2013
2.8 0.2
Fax
e-Mail ø 60 46
ø 70
Minimum illumination 1.25 LuxLVK(middle
(Polar) of escape route)
Inotec Sicherheitstechnik GmbH - Inotec SN 9127-11 /
166 w w w. i n o t e c - l i c h t . d e
SN 9107-11 LED 24V
Elegant LED downlight ideal for area or escape route SN 9107-11 LED round Recessed ceiling mounting
illumination, with powder-coated metal cover, without Art. no. 809 702
any visible screws and asymmetric light distribution.
Tool-less installation in a 68mm switch-box incl. LED
driver / monitoring.
Technical data
ø85
Material : powder-coated steel-sheet ø 68
2 28
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring SN 9107-11 LED squared Recessed ceiling mounting
Art. no. 809 703
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
ø 68
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
2 28
DIN EN 1838 q85
Ceiling mounting
184 52
Mounting height [m] [m] [m] [m] [m]
38
63
2.8 0.2
Fax
e-Mail
w w w. i n o t e c - l i c h t . d e 167
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 9024 LED 24V
Elegant LED downlight for recessed ceiling mounting or SN 9024 L LED 24V Recessed luminaire mounting
luminaire integration with anodised aluminium cover Art. no. 810 095
without any visible screws. Ideal for area or escape
route illumination.
Technical data
ø33
Material : Aluminum / Stainless steel A4
brushed
46
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
8
ø36
Nominal current : 80 mA
Terminals : 2.5 mm² without
feed-through wiring SN 9024 E round LED 24V Recessed ceiling mounting
Art. no. 890 546
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
ø38
30
Ceiling mounting
8
ø38
37,4
6,6
q 40
110
30
Seite 1
16
w w w. i n o t e c - l i c h t . d e 169
SN 8141.1 LED 230V
Elegant LED downlights ideal for area or escape route SN 8141.1 LED round Ceiling mounting
illumination. Powder-coated metal housing without any Art. no. 808 143
visible screws, for tool-less ceiling installation.
Technical data
ø 125
steel-sheet
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 52
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA Supply unit Accessory
Terminals : 2.5 mm² for Art. no. 890 454 - J/SV
feed-through wiring Art. no. 890 455 - SKÜ
Art. no. 890 456 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40
44
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
q 52
115
81
4,5
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04 7,5
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1 9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
170 w w w. i n o t e c - l i c h t . d e
Seite 3
SN 8141.1 LED 230V
Elegant LED downlights ideal for area or escape route SN 8141.1 LED squared Ceiling mounting
illumination. Powder-coated metal housing without any Art. no. 808 144
visible screws, for tool-less ceiling installation.
Technical data
q 125
Material : Aluminum / powder-coated
steel-sheet
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 52
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA Supply unit Accessory
Terminals : 2.5 mm² for Art. no. 890 457 - J/SV
feed-through wiring Art. no. 890 458 - SKÜ
Art. no. 890 459 - NE/SV
Temperature ta : -15°C... +40°C
Protection category : IP40 44
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
q 70
113
81
Ceiling mounting
120
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
w w w. i n o t e c - l i c h t . d e 171
Seite 3
SN 8124.1-11 LED 24V
Elegant LED downlights ideal for area or escape route SN 8124.1-11 LED round Ceiling mounting
illumination. Powder-coated metal housing without any Art. no. 810 120
visible screws, for tool-less ceiling installation.
Technical data
ø76
Material : Aluminum / powder-coated
ø85
41
steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring SN 8124.1-11 LED squared Ceiling mounting
Temperature ta : -15°C... +40°C Art. no. 810 122
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 q 80
q 85
41
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
White aluminium (RAL 9006) ... L10
Stainless steel ... L30
Special colours ... L99
Supply unit Accessory
Attach the colour code to Art. no. 890 451 round
part number e.g. 800 014 LXX Art. no. 890 452 squared
4,5
20 35
Ceiling mounting
Mounting height [m] [m] [m] 7,5
Am Buschgarten 17
5.5 1.1
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
7.2
59469 Ense e-Mail sven.nienhaus@gmx.de
80
25
28
80 80
η =
Seite 3
172 w w w. i n o t e c - l i c h t . d e
SN 8124.1-41 LED 24V
Elegant LED downlights ideal for area or escape route SN 8124.1-41 LED round Ceiling mounting
illumination. Powder-coated metal housing without any Art. no. 810 121
visible screws, for tool-less ceiling installation.
Technical data
ø76
Material : Aluminum / powder-coated
ø85
41
steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring SN 8124.1-41 LED squared Ceiling mounting
Temperature ta : -15°C... +40°C Art. no. 810 123
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 q 80
q 85
41
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
White aluminium (RAL 9006) ... L10
Stainless steel ... L30
Special colours ... L99
Supply unit Accessory
Attach the colour code to Art. no. 890 451 round
part number e.g. 800 014 LXX Art. no. 890 452 squared
4,5
20 35
Ceiling mounting
Mounting height [m] [m] [m] 7,5
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
13.8 Art. no. 890 701
59469 Ense e-Mail sven.nienhaus@gmx.de
80
25
28
80 80
η =
Seite 7
w w w. i n o t e c - l i c h t . d e 173
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 8127-11 LED 24V
Elegant LED downlight with powder-coated metal SN 8127-11 LED round Ceiling mounting
cover without any visible screws and asymmetric light Art. no. 810 314
distribution. Ideal for area or escape route illumination.
Tool-less ceiling installation.
Technical data
ø76
Material :
ø85
Aluminum / powder-coated
40
steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring SN 8127-11 LED squared Ceiling mounting
Art. no. 810 315
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
q 80
DIN EN 1838 q 85
40
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
White aluminium (RAL 9006) ... L10
Stainless steel ... L30
Special colours ... L99 Supply unit Accessory
Attach the colour code to Art. no. 890 451 round
part number e.g. 800 014 LXX Art. no. 890 452 squared
4,5
20 35
Ceiling mounting 7,5
Mounting height [m] [m] [m] [m] [m]
2.5 4.2 10.9 2.7 1.0
q 72
55
20
Projekt 1
3.0 4.5 11.6 2.8 0.9
4.0 Bearbeiter(in)
Telefon
0.8 12.5
30.08.2013
2.8 0.2
Fax
e-Mail
25
28
80 80
w w w. i n o t e c - l i c h t . d e 175
Qualität und Effizienz
Sicherheitstechnik GmbH
176 w w w. i n o t e c - l i c h t . d e
SN 8040 TES 230V
Elegant high-quality LED downlight ideal for area or SN 8040 TES 230V Ceiling mounting
escape route illumination. Perfect for combined usage Art. no. 808 162 - J/SV - 2700K
of safety and general lighting. Possible adaption to Art. no. 808 165 - J/SV - 3500K
the light colour of the general lighting by Translucent- Art. no. 808 168 - J/SV - 4300K
Emitting-Surface (TES) technology. Powder-coated Art. no. 808 163 - SKÜ - 2700K
aluminium housing for ceiling mounting with high Art. no. 808 166 - SKÜ - 3500K
protection category and without any visible screws. Art. no. 808 169 - SKÜ - 4300K
Art. no. 808 164 - NE/SV - 2700K
Art. no. 808 167 - NE/SV -3500K
Technical data
Art. no. 808 170 - NE/SV - 4300K
106,5
Illuminant : LEDs / TES
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
ø130
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5m 3.7 9.4
3.0m 3.8 10.1
4.0m 4.1 11.0
Projekt 1 5.0m 4.1 11.6
6.0m 3.8 11.7
13.06.2013
η =
Seite 1
w w w. i n o t e c - l i c h t . d e 177
SN 8040 TES 24V
Elegant high-quality LED downlight ideal for area or SN 8040 TES 24V Ceiling mounting
escape route illumination. Perfect for combined usage Art. no. 810 307 - 2700K
of safety and general lighting. Possible adaption to Art. no. 810 308 - 3500K
the light colour of the general lighting by Translucent- Art. no. 810 309 - 4300K
Emitting-Surface (TES) technology. Powder-coated
aluminium housing for ceiling mounting with high
106,5
protection category and without any visible screws.
Technical data
ø130
Illuminant : LEDs / TES
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5m 3.7 9.4
3.0m 3.8 10.1
4.0m 4.1 11.0
Projekt 1 5.0m 4.1 11.6
6.0m 3.8 11.7
13.06.2013
η =
Seite 1
178 w w w. i n o t e c - l i c h t . d e
SN 8040-41 LED 230V
Elegant high-quality LED downlight ideal for area or SN 8040-41 LED 230V Ceiling mounting
escape route illumination. Powder-coated aluminium Art. no. 808 159 - J/SV
housing for ceiling mounting with high protection Art. no. 808 160 - SKÜ
category and without any visible screws. Art. no. 808 161 - NE/SV
Technical data
106,5
Material : Aluminum powder-coated
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
ø130
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1 9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
w w w. i n o t e c - l i c h t . d e
Seite 3
179
SN 8040-41 LED 24V
Elegant high-quality LED downlight ideal for area or SN 8040-41 LED 24V Ceiling mounting
escape route illumination. Powder-coated aluminium Art. no. 810 306
housing for ceiling mounting with high protection
category and without any visible screws.
106,5
Technical data
ø130
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1 9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 3
180 w w w. i n o t e c - l i c h t . d e
SN 8106-11 LED 24V
High quality LED downlight for ceiling mounting, ideal SN 8106-11 Ceiling mounting
for area or escape route illumination. Art. no. 810 214
Unobtrusive housing thanks to 24V technology made
of powder-coated aluminium with high protection cate-
ø80 56
gory and without any visible screws. ø4,5
22 8
Technical data
24
Material : Aluminum powder-coated
58,5
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 80 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m]
2.5 2.6 6.6
3.0 2.7 7.2
3.5 2.6 7.5
4.0 2.5 7.7
4.5 2.2 7.6
Projekt 1
5.0 1.8 7.4 24.03.2012
Am Buschgarten 17
5.5 1.1
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
7.2
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 3
w w w. i n o t e c - l i c h t . d e 181
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 2040
Sicherheitstechnik GmbH
With its rear cable entries, and optional knock-out side entries,
this luminaire’s construction also takes into account the trends
and changes in electrical installation. Because of the great
flexibility, people often resort to an exposed tube installation,
even in the case of architecturally sophisticated buildings. The
new SN 2040 offers all the advantages of surface mounting,
while its flat design blends unobtrusively with the architecture.
w w w. i n o t e c - l i c h t . d e 183
SN 2040.1-41 LED 230V
Functional LED downlight with a flat design ideal for SN 2040.1-41 LED 230V Ceiling mounting
area or escape route illumination. UV resistant, heat Art. no. 802 119.1 - J/SV
filament tested polycarbonate housing for ceiling Art. no. 802 118.1 - SKÜ
mounting with optional side cable entry. Art. no. 802 120.1- NE/SV
Technical data
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1
9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130 13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 28
184 w w w. i n o t e c - l i c h t . d e
SN 2040.1-41 LED 24V
Functional LED downlight with a flat design ideal for SN 2040.1-41 LED 24V Ceiling mounting
area or escape route illumination. UV resistant, heat Art. no. 810 196.1
filament tested polycarbonate housing for ceiling
mounting with optional side cable entry.
Technical data
Ceiling mounting
Mounting height [m] [m] [m]
2.5 3.7 8.5
3.0 4.1 9.7
4.0 4.7 11.5
5.0 5.0 12.9
6.0 5.1 13.9
7.0 4.9 14.3
8.0 4.5 14.4
Projekt 1
9.0 3.7 14.3 24.03.2012
Am Buschgarten 17
10.0 2.5
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130 13.8
Fax 02938 / 97 30 6 - 130
59469 Ense e-Mail sven.nienhaus@gmx.de
η =
Seite 28
w w w. i n o t e c - l i c h t . d e 185
SN 2040.1-T LED 230V
Functional LED downlight with a flat design for moun- SN 2040.1-T LED 230V Ceiling mounting
ting height up to 32m, ideal for escape route illumina- Art. no. 802 125.1 - J/SV
tion. UV resistant, heat filament tested polycarbonate Art. no. 802 124.1 - SKÜ
housing for ceiling mounting with optional side cable Art. no. 802 126.1- NE/SV
entry.
Technical data
Ceiling mounting
Mounting height [m] [m] [m]
11.0 4.6 11.1
12.0 4.7 11.5
14.0 4.9 12.5
16.0 5.0 13.2
18.0 5.0 13.7
20.0 5.0 14.0
22.0 4.9 14.2
24.0 4.6 14.3
26.0 4.2 14.3
28.0 3.7 14.1
Projekt 1
30.0 2.9 14.1
32.0 0.9 13.6
24.03.2012
η =
186 w w w. i n o t e c - l i c h t . d e
Seite 27
SN 2040.1-T LED 24V
Functional LED downlight with a flat design for moun- SN 2040.1-T LED 24V Ceiling mounting
ting height up to 32m, ideal for escape route illumina- Art. no. 810 198.1
tion. UV resistant, heat filament tested polycarbonate
housing for ceiling mounting with optional side cable
entry.
Technical data
Ceiling mounting
Mounting height [m] [m] [m]
11.0 4.6 11.1
12.0 4.7 11.5
14.0 4.9 12.5
16.0 5.0 13.2
18.0 5.0 13.7
20.0 5.0 14.0
22.0 4.9 14.2
24.0 4.6 14.3
26.0 4.2 14.3
28.0 3.7 14.1
Projekt 1
30.0 2.9 14.1
32.0 0.9 13.6
24.03.2012
η =
w w w. i n o t e c - l i c h t . d e Seite 27
187
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SN 8001
Sicherheitstechnik GmbH
90° 90°
75° 75°
1000
60° 60°
1500
2500
3000
30° 15° fl
0° 15° 30°
cd/klm η = 99%
Reduced battery capacity C90 - C270
w w w. i n o t e c - l i c h t . d e 189
SN 8001 LED 230V
Universal LED downlight for area or escape route illumi- SN 8001 D LED 230V Ceiling mounting
nation with powder-coated metal housing for surface Art. no. 808 148 - J/SV
installation. Installation height up to 32m. Art. no. 808 147 - SKÜ
Art. no. 808 149 - NE/SV
Technical data
55
Material : powder-coated steel-sheet
25
Illuminant : LEDs
25
q 120
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring SN 8001 WA LED 230V Wall bracket mounting
Temperature ta : -15°C... +40°C Art. no. 808 151 - J/SV
Protection category : IP40 Art. no. 808 150 - SKÜ
Art. no. 808 152 - NE/SV
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 55
DIN EN 1838
q 120
Ceiling mounting
Mounting height [m] [m] [m]
11.0 4.6 11.1
12.0 4.7 11.5
14.0 4.9 12.5
16.0 5.0 13.2
18.0 5.0 13.7
20.0 5.0 14.0
22.0 4.9 14.2
24.0 4.6 14.3
26.0 4.2 14.3
28.0 3.7 14.1
Projekt 1
30.0 2.9 14.1
32.0 0.9 13.6
24.03.2012
η =
190 w w w. i n o t e c - l i c h t . d e
Seite 27
SN 8001 LED 24V
Universal LED downlight for area or escape route illumi- SN 8001 D LED 24V Ceiling mounting
nation with powder-coated metal housing for surface Art. no. 810 168
installation. Installation height up to 32m.
Technical data 55
25
Material : powder-coated steel-sheet
25
q 120
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C SN 8001 WA LED 24V Wall bracket mounting
Protection category : IP40 Art. no. 810 169
Protection class : III
55
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
q 120
Housing-colours Part.no. Colour code
White (RAL 9016) ... L04
Dark grey (RAL 7015) ... L16
Special colours ... L99
76
Attach the colour code to
part number e.g. 800 014 LXX
Ceiling mounting
Mounting height [m] [m] [m]
11.0 4.6 11.1
12.0 4.7 11.5
14.0 4.9 12.5
16.0 5.0 13.2
18.0 5.0 13.7
20.0 5.0 14.0
22.0 4.9 14.2
24.0 4.6 14.3
26.0 4.2 14.3
28.0 3.7 14.1
Projekt 1
30.0 2.9 14.1
32.0 0.9 13.6
24.03.2012
η =
w w w. i n o t e c - l i c h t . d e Seite 27
191
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Advantages
Easy installation
Ball-impact resistant acc. to DIN VDE 0710-13
Impact resistance class IK10 acc. to EN 50102
Slim design
Areas of application
Gyms and sports complexes
Schools
Workplaces with high mechanical requirements
Impact-resistant luminaires
as per DIN VDE 0710-13
IK10
SN 8030 198
w w w. i n o t e c - l i c h t . d e 193
SNP 8030 LED 230V
Single sided ball-impact and shock resistant exit- SNP 8030 LED 230V Wall mounting
luminaire. Powder-coated aluminium housing with slim Art. no. 808 702 - J/SV
design and brilliant pictograph illumination > 500cd/
m2. Perfect for use in environments with high mechani-
cal stresses and in sports facilities.
Technical data
170
Viewing distance : 30 m
Material : powder-coated steel-sheet 320 46,5
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
SNP 8030 WE LED 230V Recessed wall mounting
Nominal current : 18 mA
Art. no. 808 703 - J/SV
Power consumption : 10.4 VA
Terminals : 2.5 mm² for
feed-through wiring 332
Temperature ta : -15°C... +40°C
Protection category : IP40 212
176
Protection class : I
Impact resistance : IK10
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 364 52
DIN EN 1838
194 w w w. i n o t e c - l i c h t . d e
SNP 8030 LED 230V
Double sided ball-impact and shock resistant exit- SNP 8030 D LED 230V Ceiling mounting
luminaire. Powder-coated aluminium housing with slim Art. no. 808 704 - J/SV
design and brilliant pictograph illumination > 500cd/
m2. Perfect for use in environments with high mechani-
cal stresses and in sports facilities.
Technical data
200
Viewing distance : 30 m
Material : powder-coated steel-sheet 320 80,5
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20% Impact-resistant luminaires
Nominal current : 32 mA as per DIN VDE 0710-13
Power consumption : 13.5 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40 IK10
Protection class : I
Impact resistance : IK10
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 195
SNP 8030 LED 24V
Single sided ball-impact and shock resistant exit- SNP 8030 LED 24V Wall mounting
luminaire. Powder-coated aluminium housing with slim Art. no. 810 179
design and brilliant pictograph illumination > 500cd/
m2. Perfect for use in environments with high mechani-
cal stresses and in sports facilities.
Technical data
170
Viewing distance : 30 m
Material : powder-coated steel-sheet 320 46,5
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 115 mA
SNP 8030 WE LED 24V Recessed wall mounting
Terminals : 2.5 mm² for
Art. no. 810 180
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40 332
Protection class : III
Impact resistance : IK10 212
176
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
364 52
Ball-impact and shock resistant luminaires built to
DIN VDE 0710-13 and DIN EN 50102.
196 w w w. i n o t e c - l i c h t . d e
SNP 8030 LED 24V
Double sided ball-impact and shock resistant exit- SNP 8030 D LED 24V Ceiling mounting
luminaire. Powder-coated aluminium housing with slim Art. no. 810 181
design and brilliant pictograph illumination > 500cd/
m2. Perfect for use in environments with high mechani-
cal stresses and in sports facilities.
Technical data
200
Viewing distance : 30 m
Material : powder-coated steel-sheet 320 80,5
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Impact-resistant luminaires
Terminals : 2.5 mm² for as per DIN VDE 0710-13
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : III
Impact resistance : IK10 IK10
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 197
SN 8030 D LED 230V
Ball-impact and shock resistant safety luminaires with SN 8030 D LED 230V Ceiling mounting
state-of-the-art LED-technology for area or escape Art. no. 808 706 - J/SV
route illumination.Powder-coated aluminium housing Art. no. 808 705 - SKÜ
with slim design, perfect for use in environments with Art. no. 808 707 - NE/SV
high mechanical stresses and in sports facilities.
Technical data
25
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
η =
198 w w w. i n o t e c - l i c h t . d e
Seite 30
SN 8030 E LED 230V
Ball-impact and shock resistant safety luminaires with SN 8030 E LED 230V Recessed ceiling mounting
state-of-the-art LED-technology for area or escape Art. no. 808 711
route illumination.Powder-coated aluminium housing
with slim design, perfect for use in environments with 175 25
150 23
high mechanical stresses and in sports facilities.
125
Technical data
38
63
Impact resistance : IK10
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 49
DIN EN 1838
η =
w w w. i n o t e c - l i c h t . d e 199
Seite 30
SN 8030 D LED 24V
Ball-impact and shock resistant safety luminaires with SN 8030 D LED 24V Ceiling mounting
state-of-the-art LED-technology for area or escape Art. no. 810 310
route illumination.Powder-coated aluminium housing
with slim design, perfect for use in environments with
high mechanical stresses and in sports facilities.
Technical data
25
Impact resistance : IK10
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
120 57
40
Ball-impact and shock resistant luminaires built to
25
DIN VDE 0710-13 and DIN EN 50102.
η =
200 w w w. i n o t e c - l i c h t . d e
Seite 30
SN 8030 E LED 24V
Ball-impact and shock resistant safety luminaires with SN 8030 E LED 24V Recessed ceiling mounting
state-of-the-art LED-technology for area or escape Art. no. 808 711
route illumination.Powder-coated aluminium housing
with slim design, perfect for use in environments with 175 25
150 23
high mechanical stresses and in sports facilities.
125
Technical data
38
63
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 49
η =
w w w. i n o t e c - l i c h t . d e 201
Seite 30
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Advantages
Different housing sizes
Protection ratings up to IP65
Areas of application
Workplaces
Car parks
Outdoor areas
SN 2100 214
SNP1006 220
w w w. i n o t e c - l i c h t . d e 203
SN 2100 / SN(P) 2130 / SNP 2230
Sicherheitstechnik GmbH
204 w w w. i n o t e c - l i c h t . d e
SN 2100 / SN(P) 2130 / SNP 2230
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e 205
SN 2100 / SN(P) 2130 / SNP 2230
Sicherheitstechnik GmbH
D
PC II IP 65 UV resistant
The high protection rating and the housing‘s
protective insulation allow use in difficult
ambient conditions
The luminaires, available in IP40 and IP65, are made of high-
quality UV- and glow-wire- resistant polycarbonate. Protection
class II and protection category IP65 is ensured by the encapsu-
lated terminal compartment, even with side cable entry.
206 w w w. i n o t e c - l i c h t . d e
SN 2100 / SN(P) 2130 / SNP 2230
Sicherheitstechnik GmbH
Quick to install in
five easy steps
1. Install luminaire housing
2. Connect power cable
3. Fit illuminant
4. Click reflector into place
5. Close cover
w w w. i n o t e c - l i c h t . d e 207
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 2130 LED 230V
Single sided LED exit luminaire made of UV resistant, SNP 2130 LED 230V Wall mounting
heat filament tested polycarbonate housing with optio- Art. no. 802 610 - J/SV IP65
nal side cable entry and comfortable installation space. Art. no. 802 609 - SKÜ IP65
Homogeneous pictograph illumination by state-of-the- Art. no. 802 611 - NE/SV IP65
art LED technology. Art. no. 802 607 - J/SV IP40
Art. no. 802 606 - SKÜ IP40
Art. no. 802 608 - NE/SV IP40
Technical data
182
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for Mounting frame Recessed wall mounting
feed-through wiring Art. no. 890 050
Temperature ta : -15°C... +40°C
Protection category : IP40/65 378,5
355
316,5
Protection class : II
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
223,5
DIN EN 1838
190
161 76
w w w. i n o t e c - l i c h t . d e 209
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
SNP 2230 LED 230V
Double sided LED exit luminaire made of UV resistant, SNP 2230 LED 230V Ceiling mounting
heat filament tested polycarbonate housing with optio- Art. no. 802 616 - J/SV IP65
nal side cable entry and comfortable installation space. Art. no. 802 615 - SKÜ IP65
Homogeneous pictograph illumination by state-of-the- Art. no. 802 617 - NE/SV IP65
art LED technology. Art. no. 802 613 - J/SV IP40
Art. no. 802 612 - SKÜ IP40
Art. no. 802 614 - NE/SV IP40
Technical data
182
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for Mounting adapter Pendulum mounting
feed-through wiring Art. no. 890 052 - IP40
Temperature ta : -15°C... +40°C
Protection category : IP40/65
338
Protection class : II 250
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
183
338
240
183
150
w w w. i n o t e c - l i c h t . d e 211
SNP 2130 LED 24V
Single sided LED exit luminaire made of UV resistant, SNP 2130 LED 24V Wall mounting
heat filament tested polycarbonate housing with optio- Art. no. 810 303 - IP65
nal side cable entry and comfortable installation space. Art. no. 810 302 - IP40
Homogeneous pictograph illumination by state-of-the-
art LED technology.
337 75
Technical data
182
Viewing distance : 30 m
Material : Polycarbonate white
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA Mounting frame Recessed wall mounting
Terminals : 2.5 mm² for Art. no. 890 050
feed-through wiring
Temperature ta : -15°C... +40°C 378,5
355
316,5
Protection category : IP40/65
Protection class : III 223,5
212 w w w. i n o t e c - l i c h t . d e
SNP 2230 LED 24V
Double sided LED exit luminaire made of UV resistant, SNP 2230 LED 24V Ceiling mounting
heat filament tested polycarbonate housing with optio- Art. no. 810 305 - IP65
nal side cable entry and comfortable installation space. Art. no. 810 304 - IP40
Homogeneous pictograph illumination by state-of-the-
art LED technology.
337 218
60
Technical data
182
Viewing distance : 30 m
Material : Polycarbonate white
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA Mounting adapter Pendulum mounting
Terminals : 2.5 mm² for Art. no. 890 052 - IP40
feed-through wiring
Temperature ta : -15°C... +40°C
338
Protection category : IP40/65 250
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
183
DIN EN 1838
338
240
183
150
w w w. i n o t e c - l i c h t . d e 213
SN 2100 LED 230V
Versatile LED downlight ideal for area or escape route SN 2100 LED 230V Ceiling mounting
illumination. UV resistant, heat filament tested poly- Art. no. 802 104 - J/SV IP65
carbonate housing with optional side cable entry and Art. no. 802 103 - SKÜ IP65
comfortable installation space. Art. no. 802 105 - NE/SV IP65
Art. no. 802 101 - J/SV IP40
Technical data Art. no. 802 100 - SKÜ IP40
Art. no. 802 102 - NE/SV IP40
140
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40/65 Mounting adapter Chain mounting
Protection class : II Art. no. 890 724
Ceiling mounting
141
120
η =
Seite 1
214 w w w. i n o t e c - l i c h t . d e
SN 2100 LED 24V
Versatile LED downlight ideal for area or escape route SN 2100 LED 24V Ceiling mounting
illumination. UV resistant, heat filament tested poly- Art. no. 810 201 - IP65
carbonate housing with optional side cable entry and Art. no. 810 200 - IP40
comfortable installation space.
Technical data
200 65
140
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Mounting adapter Chain mounting
Protection category : IP40/65
Art. no. 890 724
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 201
150
Ceiling mounting
141
120
η =
Seite 1
w w w. i n o t e c - l i c h t . d e 215
SN 2100 T LED 230V
Versatile LED downlight for mounting height up to 20m, SN 2100 T LED 230V Ceiling mounting
ideal for area or escape route illumination. UV resistant, Art. no. 802 116 - J/SV IP65
heat filament tested polycarbonate housing with optio- Art. no. 802 115 - SKÜ IP65
nal side cable entry and comfortable installation space. Art. no. 802 117 - NE/SV IP65
Art. no. 802 113 - J/SV IP40
Technical data Art. no. 802 112 - SKÜ IP40
Art. no. 802 114 - NE/SV IP40
140
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40/65 Mounting adapter Chain mounting
Protection class : II Art. no. 890 724
Ceiling mounting
141
120
Am Buschgarten 17
59469 Ense
20.0 2.9
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130 13.2
e-Mail sven.nienhaus@inotec-licht.de
13.3 3.1
Minimum illumination 1.25 Lux (middle
LVK
of escape route)
Inotec Sicherheitstechnik GmbH Eulumdat - SN 2100 T LED-W Optik FP11076 /
(Polar)
η =
Seite 1
216 w w w. i n o t e c - l i c h t . d e
SN 2100 T LED 24V
Versatile LED downlight for mounting height up to 20m, SN 2100 T LED 24V Ceiling mounting
ideal for area or escape route illumination. UV resistant, Art. no. 810 205 - IP65
heat filament tested polycarbonate housing with optio- Art. no. 810 204 - IP40
nal side cable entry and comfortable installation space.
Technical data
200 65
140
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Mounting adapter Chain mounting
Protection category : IP40/65
Art. no. 890 724
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838 201
150
Ceiling mounting
141
120
Am Buschgarten 17
59469 Ense
20.0 2.9
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130 13.2
e-Mail sven.nienhaus@inotec-licht.de
13.3 3.1
Minimum illumination 1.25 Lux (middle
LVK
of escape route)
Inotec Sicherheitstechnik GmbH Eulumdat - SN 2100 T LED-W Optik FP11076 /
(Polar)
η =
Seite 1
w w w. i n o t e c - l i c h t . d e 217
SN 2100 TB LED 230V
Versatile LED downlight for mounting height up to 20m, SN 2100 TB LED 230V Ceiling mounting
ideal for illumination of 3m - 4m wide escape routes. UV Art. no. 802 139 - J/SV IP65
resistant, heat filament tested polycarbonate housing Art. no. 802 140 - SKÜ IP65
with optional side cable entry and comfortable installa- Art. no. 802 141 - NE/SV IP65
tion space. Art. no. 802 142 - J/SV IP40
Art. no. 802 143 - SKÜ IP40
Technical data Art. no. 802 144 - NE/SV IP40
140
Nominal voltage DC : 220V ± 20%
Nominal current : 32 mA
Power consumption : 8.3 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C Mounting adapter Chain mounting
Protection category : IP40/65 Art. no. 890 724
Protection class : II
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 201
DIN EN 1838 150
141
120
Bearbeiter(in)
Telefon
Seite 1
218 w w w. i n o t e c - l i c h t . d e
SN 2100 TB LED 24V
Versatile LED downlight for mounting height up to 20m, SN 2100 TB LED 24V Ceiling mounting
ideal for illumination of 3m - 4m wide escape routes. UV Art. no. 810 216 - IP65
resistant, heat filament tested polycarbonate housing Art. no. 810 217 - IP40
with optional side cable entry and comfortable installa-
tion space.
140
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C Mounting adapter Chain mounting
Art. no. 890 724
Protection category : IP40/65
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and 201
150
DIN EN 1838 141
120
Bearbeiter(in)
Telefon
Seite 1
w w w. i n o t e c - l i c h t . d e 219
SNP 1006 LED 230V
Polycarbonate safety- /exit-luminaire with single- SNP 1006 LED 230V Wall or ceiling mounting
or triple-sided light output. Art. no. 801 556 - J/SV
Art. no. 801 557 - SKÜ
Art. no. 801 558 - NE/SV
Technical data
Viewing distance : 14 m
Material : Polycarbonate white
127
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz 257 79
Nominal voltage DC : 220V ± 20%
Nominal current : 25 mA
Power consumption : 7.1 VA
Terminals : 2.5 mm² for Chain adapter Optional accessory
feed-through wiring Art. no. 190 153
Temperature ta : -15°C... +40°C
Protection category : IP20
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
127
DIN EN 1838
257 79
Ceiling mounting
Mounting height [m] [m] [m] [m] [m]
2.5 2.9 7.6 8.4 3.1
3.0 2.9 8.0 8.7 3.1 Pendulum adapter Optional accessory
4.0 2.7 8.3 9.1 2.9 Art. no. 190 152
Projekt 1
8.9 2.3
Am Buschgarten 17 Fax +49 29 38/97 30-29
D - 59 469 Ense e-Mail info@inotec-licht.de
260 80
Seite 1
280 80
220 w w w. i n o t e c - l i c h t . d e
SNP 1006 LED 24V
Polycarbonate safety- /exit-luminaire with single- SNP 1006 LED 24V Wall or ceiling mounting
or triple-sided light output. Art. no. 810 316
Technical data
Viewing distance : 14 m
127
Material : Polycarbonate white
Illuminant : LEDs 257 79
257 79
Ceiling mounting
Mounting height [m] [m] [m] [m] [m]
2.5 2.9 7.6 8.4 3.1
3.0 2.9 8.0 8.7 3.1
Projekt 1
4.0 2.7 8.3 9.1 2.9 Pendulum adapter Optional accessory
INOTEC Sicherheitstechnik GmbH 5.0 2.1 8.1
Bearbeiter(in) INOTEC Sicherheitstechnik GmbH
Telefon +49 29 38/97 30-0
18.06.2015
260 80
Seite 1
150
280 80
w w w. i n o t e c - l i c h t . d e 221
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Segmental luminaires
Advantages
Dynamic way guidance
Visual blocking of a smoke-filled escape route
Individual configuration
Areas of application
To compensate fire protection measures
Building areas with a risk of smoke
Unclear escape route situations
FL 5101 225
FL 5103 226
FL 5105 228
w w w. i n o t e c - l i c h t . d e 223
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
FL 5101 LED 24V
Dynamic single-sided emergency exit luminaire in FL 5101 LED 24V Wall mounting
modular design with customisable assembly. Ideal to Art. no. 800 010V
display the safe escape route depending on the smoke
situation inside a building.
130
Viewing distance : 20 m
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 63 mA (white+green LEDs)
or 126 mA (red LEDs) FL 5101 WE LED 24V Recessed wall mounting
Art. no. 800 011V
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
160 60 6
Protection class : III 153
DIN EN 1838
w w w. i n o t e c - l i c h t . d e 225
FL 5103 LED 230V
Dynamic single-sided emergency exit luminaire in FL 5103 LED 230V Wall mounting
modular design with customisable assembly. Ideal to Art. no. 800 018V
display the safe escape route depending on the smoke
situation inside a building.
130
Viewing distance : 20 m
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
FL 5103 WE LED 230V Recessed wall mounting
Nominal current : Per module 9 mA
Art. no. 800 019V
(white+green LEDs)
or 18 mA (red LEDs)
Power consumption : Per module 2.0 VA
(white+green LEDs)
400
or 4.0 VA (red LEDs) 393
60 6
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP40
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
226 w w w. i n o t e c - l i c h t . d e
FL 5103 LED 24V
Dynamic single-sided emergency exit luminaire in FL 5103 LED 24V Wall mounting
modular design with customisable assembly. Ideal to Art. no. 800 012V
display the safe escape route depending on the smoke
situation inside a building.
130
Viewing distance : 20 m
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : Per module 63 mA
(white+green LEDs) FL 5103 WE LED 24V Recessed wall mounting
or 150 mA (red LEDs) Art. no. 800 013V
w w w. i n o t e c - l i c h t . d e 227
FL 5105 LED 230V
Dynamic single-sided emergency exit luminaire in FL 5105 LED 230V Wall mounting
modular design with customisable assembly. Ideal to Art. no. 800 022V
display the safe escape route depending on the smoke
situation inside a building.
130
Viewing distance : 20 m
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage AC : 230V ± 10%, 50/60Hz
Nominal voltage DC : 220V ± 20%
FL 5105 WE LED 230V Recessed wall mounting
Nominal current : Per module 9 mA
Art. no. 800 023V
(white+green LEDs)
or 18 mA (red LEDs)
Power consumption : Per module 2.0 VA
(white+green LEDs)
or 4.0 VA (red LEDs) 640
633 60 6
Terminals : 2.5 mm² for
feed-through wiring
155
130
228 w w w. i n o t e c - l i c h t . d e
FL 5105 LED 24V
Dynamic single-sided emergency exit luminaire in FL 5105 LED 24V Wall mounting
modular design with customisable assembly. Ideal to Art. no. 800 014V
display the safe escape route depending on the smoke
situation inside a building.
130
Viewing distance : 20 m
Material : powder-coated steel-sheet
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : Per module 63 mA
(white+green LEDs) FL 5105 WE LED 24V Recessed wall mounting
or 150 mA (red LEDs) Art. no. 800 015V
w w w. i n o t e c - l i c h t . d e 229
Sicherheitstechnik GmbH
w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
EX luminaires
Emergency exit and safety luminaires
The EX luminaire range consists of emergency luminaires and
exit signs in both 230V and 24V technology for hazardous areas
in zones 1, 2, 21, and 22. The luminaires can be used as safety
luminaires for wall and ceiling mounting, and, with pictograms,
as emergency exit luminaires for wall mounting.
Advantages
Also in 24V
Universal mounting
24V LED technology
Areas of application
Hazardous areas in zones 1, 2, 21, and 22
Laboratory facilities
Spray booths
Chemical industry
EX 7000 232
EX 7100 233
w w w. i n o t e c - l i c h t . d e 231
Ex 7000 LED 24V
Ex-safety- /exit-luminaire for zone 1, 21, 2, 22 according Ex 7000 LED 24V Wall mounting
to ATEX-classification Group II category 2 G D. Luminaire Art. no. 810 176
for ceiling / wall mounting, made of high-quality die-
cast aluminium.
Technical data
168
Viewing distance : 30m
300 99
Material : die-cast aluminum
Illuminant : LEDs
Nominal voltage DC : 24V ± 20%
Nominal current : 200 mA
Terminals : 2.5 mm² for
Frame incl. panel Optional accessory
feed-through wiring
Art. no. 890 640
Temperature ta : -20°C... +55°C
Protection category : IP66
Protection class : III
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m] [m] [m]
2.5 4.7 11.6 7.4 2.9
3.0 4.8 12.6 8.0 2.9
4.0 4.9 13.7 8.3 3.2
5.0 4.9 14.0 8.8 3.6
6.0 4.7 14.2 9.7 3.9
Projekt 1
7.0 4.2 14.0 10.0
17.09.2012
2.3
INOTEC Sicherheitstechnik GmbH
Am Buschgarten 17
8.0 3.3
Bearbeiter(in) Sven Nienhaus
13.6
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
- -
59469 Ense e-Mail sven.nienhaus@inotec-licht.de
η =
Seite 1
232 w w w. i n o t e c - l i c h t . d e
Ex 7100 EVG 230V
Ex-safety- /exit-luminaire for zone 1, 2, 21, 22. Made of Ex 7100 EVG 230V Wall mounting
high-quality glass fiber reinforced polyester resin for Art. no. 807 001 - SV
wall or ceiling mounting. Art. no. 807 000 - SKÜ
Technical data
425
181
Material : glasfibre reinforced polyester
Illuminant : T5 8W (G5)
Nominal voltage AC : 230V ± 10%, 50/60Hz 445
119
Nominal current : 33 mA
Power consumption : 10.5 VA
Terminals : 2.5 mm² for
feed-through wiring
Temperature ta : -15°C... +40°C
Protection category : IP66
Protection class : I
acc. to DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and
DIN EN 1838
Ceiling mounting
Mounting height [m] [m] [m] [m] [m]
2.5 3.1 8.1 10.3 3.2
3.0 3.2 8.6 9.6 3.3
4.0 3.2 9.3 9.2 3.6
Projekt 1
5.0 3.0 9.4 24.03.2012 9.9 3.7
INOTEC Sicherheitstechnik GmbH
Am Buschgarten 17
59469 Ense
6.0 2.2
Bearbeiter(in) Sven Nienhaus
Telefon 02938 / 97 30 - 130
Fax 02938 / 97 30 6 - 130
e-Mail sven.nienhaus@gmx.de
9.2 10.5 2.6
Minimum illumination 1.25 Lux (middle
LVK (Polar) of escape route)
6100/1081-8... EX 7100 EVG /
η =
Seite 9
w w w. i n o t e c - l i c h t . d e 233
Sicherheitstechnik GmbH
Special colours
The choice is yours ...
When we match an INOTEC luminaire to the customer‘s desired
colour, there are two ways for us to do this: a standard powder
coating or the INOTEC high-performance powder coating
system.
The standard powder coating can be used to paint all lumi-
naires that will be mounted in interior spaces where particularly
high protection is not required (IP4x). Simply select the desired
RAL colour to ensure that your luminaires match the building‘s
architecture and colour design.
Where luminaires with a higher protection rating are required,
the INOTEC high-performance powder coating system is used.
This is a two-coat powder coating system with excellent corro-
sion protection. INOTEC luminaires with the high-performance
powder coating system are ideal for use in adverse environ-
ments – both indoors and out. These luminaires can be used
anywhere from industrial plants to swimming pools, to the
outsides of buildings. Even when exposed to heavy weathering,
from sunlight, temperature and humidity, the surface does not
change over time and there is no reduction in appearance. And
even aggressive liquids cannot damage the high-performance
powder coating. Also, thanks to a suitable surface pretreatment,
scratches in the powder coating do not allow rust to spread.
234 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Contacts
How to reach us
or contact us on:
Tel.: +49 - 29 38 - 97 30 - 0
Email: export@inotec-licht.de
w w w. i n o t e c - l i c h t . d e 235
Sicherheitstechnik GmbH
Made in Germany
One-stop quality
At INOTEC, you can fulfil all your emergency lighting require-
ments from a single source - and with the quality that comes
from being made in Germany. We choose Germany as a busi-
ness location not only for the development and design of our
products but also for their manufacture.
To meet our own high demands and those of our customers, we
focus on:
Customer-oriented development
Latest technologies
Constant optimisation and development of our products
Quality suppliers
At the same time, the safety our products stand for is one of our
most important quality features. INOTEC also means innovative
luminaire design and high-quality workmanship.
Because of the high level of responsibility placed on our
products, quality assurance is a particular priority for INOTEC.
Thanks to our intensive quality management, we are able to
guarantee the optimum safety and of our products.
236 w w w. i n o t e c - l i c h t . d e
Sicherheitstechnik GmbH
Luminaire categories
Protection class II
Type Category Page
SN 2040 downlight 183
SN 2100/2130 polycarbonate luminaire 206
SN 9100 downlight 157
SN 9104 downlight 160
SNP 2130 / SNP 2230 polycarbonate luminaire 209
w w w. i n o t e c - l i c h t . d e 237
Sicherheitstechnik GmbH
D.E.R.
Dynamic Escape Routing
Deeper information about the D.E.R. system and luminaires can
be found in the specific D.E.R. catalogue.
238 w w w. i n o t e c - l i c h t . d e
12/2015
707 105 gb
System luminaires 2015/2016
Sicherheitstechnik GmbH
Sicherheitstechnik GmbH Sicherheitstechnik GmbH Sicherheitstechnik GmbH