6) (stpsiswayam gov detaleNPTEL)
it | (https://swayam.gov.in)
ashokrajanavar@gmail.com
NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL) » Pavement Materials (Under Pavement
Engineering) (course)
Week 6 Assignment 6
Course
outline ‘The due date for submitting this assignment has passed.
Due on 2022-09-07, 23:59 IST.
How does an AAs per our records you have not submitted this assignment.
NPTEL
online 1) For a purely viscous material, compliance J(t) is equal to 1 point
course VE
work? ()
un
Week 0 () nit
E
Week 1 () No, the answer is incorrect.
Score: 0
Week 2 () Accepted Answers:
un
Week 3 ()
2) In the Maxwell model 1 point
Week 4)
Total stress is equal to sum of stresses in each element
Week 5 () During creep experiment when the load is removed there is an
instantaneous strain equal to co/E
Week 6 0) Strain is equal to sum of strain in both the elements
Both b and ¢
Lecture 26;
introduction No, the answer is incorrect
a Score: 0
Viscoelasticity Accepted Answers:
(unite Both b and c
unit=718lesso
n=72) 3) The absolute viscosity of the bitumen can be obtained from 1 point
vecure2n dynamic shear rheometer as
RheologicalProperties of
Bitumen
(Part-1) (unit?
unit=71&lesso
n=73)
Lecture 28:
Rheological
Properties of
Bitumen
(Part-2) (unit?
unit=71&lesso
1-74)
Lecture 29:
Grading of
Bitumen
(Part-1) (unit?
unit=71&lesso
n=75)
Lecture 30:
Grading of
Bitumen
(Part-2) (unit?
unit=71&lesso
6)
Quiz: Week 6
Assignment 6
(assessment?
name=78)
Week 7 ()
Week 8 ()
Week 9 ()
Week 10 ()
Week 11 ()
DOWNLOAD
VIDEOS ()
WEEKLY
FEEDBACK
0
Week 12 ()
The ratio of loss modulus and angular frequency
The ratio of storage modulus and angular frequency
The ratio of complex modulus and angular frequency
The ratio of angular frequency and storage modulus
No, the answer is incorrect.
Score: 0
Accepted Answers:
The ratio of loss modulus and angular frequency
4) While plotting a mastercurve of complex modulus versus reduced 1 point
time, the shift factors at temperatures higher than the reference
temperature are
Greater than 1
Equal to 1
Less than 4
Less than 0
No, the answer is incorrect
Score: 0
Accepted Answers:
Less than 1
5) Ifa bitumen sample of 25 mm diameter with 1 mm gap is being
tested in a DSR and the resultant torque is 2454 N.mm, what is
the stress in the material?
10 Pa
0.8 MPa
1MPa
0.1 MPa
No, the answer Is incorrect.
‘Score: 0
Accepted Answers’
0.8 MPa
6) Black diagram is the curve between
Complex shear modulus and reduced frequency
Loss modulus and storage modulus
Complex shear modulus and phase angle
Loss modulus and phase angle
No, the answer is incorrect
Score: 0
Accepted Answers:
Complex shear modulus and phase angle
1 point
1 point
7) The dissipated energy in one cycle of oscillatory testing in DSR is 1 point
equal to
90 £0 Tsind0 wsind
02 co nsinb
0 £0"2 nsind
No, the answer is incorrect.
Score: 0
Accepted Answers:
00 £0 msin5
8) The following test is not available in IS 73 2013 1 point
Purity test on bitumen
Viscosity at 135 °C
Short term ageing of bitumen
Long term ageing of bitumen
No, the answer is incorrect.
Score: 0
‘Accepted Answers:
Long term ageing of bitumen
9) The specified criteria to control fatigue cracking in asphalt binders 1 point
as per Superpave performance grading system is
G*.sind > 3000 kPa
Gi/sind > 1 kPa
G*.sind < 5000 kPa
Gi/sind > 2.2 kPa
No, the answer is incorrect.
Score: 0
Accepted Answers:
G*.sind < 5000 kPa
10)Creep stiffness in BBR test is calculated at 1 point
240 seconds
20 seconds
40 seconds
60 seconds
No, the answer is incorrect.
Score: 0
Accepted Answers:
60 seconds
11) The failure strain in DTT, as per Superpave performance grading, 1 point
should be
>1%
<1%
>0.3%
<0.3%No, the answer is incorrect.
Score: 0
‘Accepted Answers
>1%
12) If the difference between high and low PG temperatures is more
than 90 °C
1 grade bumping should be done
2 grade bumping should be done
Modified bitumen should be used
None of the above
No, the answer is incorrect
Score: 0
Accepted Answers:
Modified bitumen should be used
1 point